Work Items- Full List | ASTM- WK10303 - New Standard Specification for Metric Series Machine Screws, Carbon Steel, 420 MPa Tensile Strength
- WK10323 - Revision of D6378-03 Standard Test Method for Determination of Vapor Pressure (VPx) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
- WK10401 - Revision of None Provided
- WK10803 - New Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
- WK11029 - Revision of C94/C94M-05 Standard Specification for Ready-Mixed Concrete
- WK11307 - Revision of D3354-96 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
- WK11535 - Revision of D2624-06 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
- WK11550 - Revision of F136-02a Standard Specification for Wrought Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
- WK11776 - New Test Methods for Particle Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- WK12090 - Revision of E2176-01 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Continuous Wetting
- WK12343 - New Standard Guide for a Level I Evacuation of a Passenger Using Equine
- WK13093 - Revision of D1655-06b Standard Specification for Aviation Turbine Fuels
- WK14243 - Revision of D5967-05 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
- WK14304 - New Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
- WK14355 - New Practice for Evaluating Hot Tire Pick-Up of Coatings applied to Concrete
- WK14658 - Revision of C33-03 Standard Specification for Concrete Aggregates
- WK14701 - New Practice for Symbolizing Adhesive Applications
- WK15137 - Revision of D4175-05e1 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants
- WK15155 - Revision of D3161-06 Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method
- WK15283 - New Guide for Guide for Using Whistle Signals During Water Rescue Operations
- WK15284 - New Guide for Guide for Performance of a River/Flood/Swift Water Rescuer Level III
- WK15388 - Revision of D4956-07 Standard Specification for Retroreflective Sheeting for Traffic Control
- WK15801 - Revision of E2184-02 Standard Specification for Healthcare Document Formats
- WK15892 - New Practice for Practice for Toner Sieve Measurement of Over-sized Particles
- WK15903 - Revision of G15-07 Standard Terminology Relating to Corrosion and Corrosion Testing
- WK1596 - New Guide for Ranking Footwear Bottom Materials on Various Contaminated and Noncontaminated Walkway Surfaces According to Slip Resistance Test Results
- WK16042 - Revision of D4286-90(1999) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
- WK16104 - New Practice for CONSTRUCTION OF ASPHALT-RUBBER CAPE SEAL
- WK16534 - Revision of F2245-07 Standard Specification for Design and Performance of a Light Sport Airplane
- WK16547 - Revision of A959-04 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
- WK16986 - Revision of D4814-07a Standard Specification for Automotive Spark-Ignition Engine Fuel
- WK17008 - Revision of C78-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- WK17009 - Revision of C293-07 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
- WK17261 - Revision of C1303-07 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
- WK17325 - Revision of D2321-05 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- WK17540 - Revision of D4124-01 Standard Test Methods for Separation of Asphalt into Four Fractions
- WK17626 - New Guide for Using Fluorescence Microscopy to Quantify the Spread Area of Fixed Cells
- WK17768 - Revision of D4943-02 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
- WK17797 - New Test Method for Standard Specification for Human Impact and Fall-through Resistance of Unit Skylights and Related Products Used on Skylight Openings
- WK17840 - Revision of D2726-05a Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
- WK18180 - Revision of C1679-07 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
- WK18217 - Revision of E1601-98(2003)e1 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method
- WK18241 - Revision of C989-06 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
- WK18366 - Revision of E1709-00e1 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer
- WK1863 - New Standard Specification for Asphalt-Coated Reinforced Sheets Used in Cold-Process Roofing
- WK18916 - Revision of C490-07 Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
- WK18964 - Revision of D5994-98(2003) Standard Test Method for Measuring Core Thickness of Textured Geomembrane
- WK19069 - Revision of C94/C94M-07 Standard Specification for Ready-Mixed Concrete
- WK19071 - Revision of C94/C94M-07 Standard Specification for Ready-Mixed Concrete
- WK19262 - Revision of C1077-07a Standard Practice for Laboratories Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Laboratory Evaluation
- WK19307 - Revision of D6300-07 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
- WK19618 - New Guide for Industrial Thermal Insulation Systems
- WK19740 - Revision of D6603-07 Standard Guide for Labeling of UV-Protective Textiles
- WK19820 - Revision of A505-00(2005) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
- WK19872 - Revision of D70-08 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
- WK1996 - Revision of D1413-99 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
- WK20583 - Revision of C114-07 Standard Test Methods for Chemical Analysis of Hydraulic Cement
- WK20697 - Revision of D6751-07be1 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
- WK20805 - Revision of C856-04 Standard Practice for Petrographic Examination of Hardened Concrete
- WK20865 - Revision of F2657-07 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
- WK21337 - Revision of D6936-04 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
- WK21400 - Revision of C989-06 Standard Specification for Ground Granulated Blast-Furnace Slag for Use in Concrete and Mortars
- WK21466 - Revision of D6079-04e1 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
- WK21567 - Revision of D529-04 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
- WK21673 - Revision of D6114-97(2002) Standard Specification for Asphalt-Rubber Binder
- WK21737 - New Specification for Dual Drain Systems for Swimming Pools, Spas and Hot Tubs
- WK21743 - New Test Method for Solubility of Asphalt Materials in N-propyl Bromide
- WK21745 - Revision of D692-00(2004) Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
- WK21775 - Revision of D6626-01 Standard Specification for Graded Trinidad Lake Modified Asphalt Binder
- WK2188 - Revision of D5869-95(2002) Standard Practice for Dark Oven Heat Exposure of Bituminous Materials
- WK2192 - Revision of D3462-03a Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
- WK2193 - Revision of D3018-03 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- WK21951 - Revision of B179-06 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
- WK22056 - New Guide for Standard Practice for the Evaluation and Selection of Hotel and Meeting Accommodations related to meetings, events, conferences, conventions and trade shows.
- WK22908 - Revision of C936-08 Standard Specification for Solid Concrete Interlocking Paving Units
- WK23038 - Revision of D3381-05 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
- WK2325 - Revision of A307-02 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
- WK23397 - New Test Method for Standard Test Method for Determination of Strontium-89 and Strontium-90 in Water by Cerenkov Counting
- WK23570 - Revision of C717-09 Standard Terminology of Building Seals and Sealants
- WK23875 - Revision of C177-04 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
- WK2488 - New Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip
- WK25268 - Revision of E2396-05 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Green Roof Systems
- WK25385 - New Guide for Vegetative (Green) Roof Systems
- WK26082 - New Test Method for Determining the Peel Resistance of Adhesive Applied Roofing Systems
- WK2664 - New Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer1
- WK26927 - Revision of D6300-08 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
- WK27106 - New Terminology for Digital and Multimedia Evidence Examination
- WK27337 - New Test Method for Pocket Penetrometer Test
- WK28014 - Revision of D4683-09 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C
- WK28259 - Revision of D3244-07a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
- WK29092 - Revision of E1316-10a Standard Terminology for Nondestructive Examinations
- WK29320 - New Guide for Digital Contact Thermometers
- WK2963 - Revision of D3666-02 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK3074 - Revision of D1079-02 Standard Terminology Relating to Roofing, Waterproofing, and Bituminous Materials
- WK3095 - Revision of F1667-03 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- WK31322 - Revision of D1140-00(2006) Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-µm) Sieve
- WK3145 - Revision of D4956-01a Standard Specification for Retroreflective Sheeting for Traffic Control
- WK3163 - Revision of D228-03a Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
- WK3165 - Revision of D225-03 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
- WK31804 - New Guide for Testing and Optimal Selection of Radiological Protection Garments
- WK3218 - Revision of D3666-03 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK32362 - New Terminology for Biorationals
- WK3243 - Revision of D3636-00 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
- WK32929 - New Guide for Radiation Thermometer Manual
- WK33227 - Revision of F2245-10c Standard Specification for Design and Performance of a Light Sport Airplane
- WK3379 - New Standard Guide for Safe Use of Pool Covers, Pool Alarms, Door Alarms, Window Guards, Drain Covers, and Safety Vacuum Relief Systems (SVRS) for Residential Pools, Spas, and Hot Tubs
- WK34498 - New Practice for Air Soft Player Safety Briefing
- WK36059 - Revision of E1007-11e1 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
- WK36325 - Revision of C232/C232M-09 Standard Test Methods for Bleeding of Concrete
- WK3658 - Revision of E1488-02e1 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
- WK3675 - Revision of A74-03b Standard Specification for Cast Iron Soil Pipe and Fittings
- WK37115 - Revision of C717-12 Standard Terminology of Building Seals and Sealants
- WK37573 - Revision of F2650-07 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
- WK38104 - Revision of D4644-08 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
- WK38439 - New Terminology for Terminology Standard: Forensic Engineering Incidents Involving Structures
- WK38798 - New Specification for Testing Ballot Comment Boxes
- WK38799 - New Test Method for Reviewing Ballot Functionality
- WK38800 - New Specification for Testing Ballots Again
- WK39487 - Revision of D5481-10 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
- WK39488 - Revision of D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
- WK39691 - New Test Method for Determining Index Nominal Diameter, Nominal Length and Volume Density of a Sediment Retention Fiber Roll (SRFR)
- WK39901 - Revision of E176-12 Standard Terminology of Fire Standards
- WK40121 - Revision of D6890-12 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- WK40122 - Revision of D6890-12 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- WK41174 - New Test Method for Determining Raindrop Size of Simulated Rainfall Using the Flour Pan Method
- WK41379 - New Practice for Compaction of Prismatic Hot Mix Asphalt (HMA) Test Specimens by Means of the Shear Box Compactor
- WK41422 - Revision of D7467-10 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
- WK41433 - New Specification for Cured Glass Reinforced Polymer (GRP) Jacketing for Use over Thermal Insulation
- WK41777 - New Guide for Boeing Bump Index Computations Based on Bump Template Simulations
- WK42364 - New Test Method for Evaluating Ground Response Robot Sensing: Visual Dynamic Range
- WK42422 - New Test Method for Determination of Ammonia Nitrogen by Semi-Automated Gas Diffusion Colorimetry
- WK42513 - New Guide for Swiftwater/Flood Rescue Technician Level I
- WK43296 - New Guide for Standard Guide for Swiftwater/Flood Rescue Technician Level II
- WK43297 - New Guide for Standard Guide for Swiftwater/Flood Rescue Technician Level III
- WK43517 - Revision of D3246-11 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry
- WK4352 - Revision of E1519-03 Standard Terminology Relating to Agricultural Tank Mix Adjuvants
- WK43689 - New Test Method for Thermal Effusivity Using a Modified Transient Plane Source Method
- WK43692 - Revision of F963-11 Standard Consumer Safety Specification for Toy Safety
- WK43707 - Revision of D2699-13a Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
- WK44323 - New Test Method for Evaluating Ground Response Robot Dexterity: Lift and Place
- WK44618 - New Guide for Use of Infrared Thermography in Evaluation of Buildings, Building Systems and Equipment
- WK44735 - New Test Method for Assessing Shelf Life of Containment Coatings
- WK44736 - New Test Method for Assessing Weatherability of Containment Coatings
- WK44928 - Revision of D5798-13a Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
- WK45365 - Revision of D6417-09 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
- WK46396 - New Practice for Analytic Evaluation of Translation Quality
- WK46601 - New Test Method for The Determination of the Oxygen to Metal (O/M) Ratio in Sintered Mixed Oxides ((U, Pu)O2) Pellets by Gravimetry
- WK4681 - Revision of D3666-03a Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK46947 - Revision of E1512-01(2007) Standard Test Methods for Testing Bond Performance of Bonded Anchors
- WK47712 - Revision of F963-11 Standard Consumer Safety Specification for Toy Safety
- WK47853 - New Test Method for Bird Collision Deterrence Material Threat Factor
- WK48549 - New Guide for AMF Support for Solid Modeling: Voxel Information, Constructive Solid Geometry Representations and Solid Texturing
- WK4899 - Revision of D3666-03a Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK4900 - Revision of D2517-00e1 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
- WK49205 - Revision of D6766-12 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
- WK49350 - New Test Method for Moisture Release Duration of Fresh Concrete
- WK49400 - New Practice for The Development of Multi-Attribute Sustainability Standards for Building Products
- WK49478 - New Test Method for Evaluating Response Robot Sensing: Video Latency
- WK4953 - Revision of D198-02e1 Standard Test Methods of Static Tests of Lumber in Structural Sizes
- WK49591 - New Test Methods for Thermal Conductivity and Thermal Diffusivity Using a Double-Spiral Configuration of the Transient Plane Source Method
- WK49724 - New Guide for Performing Oxygen Compatibility Assessments on Oxygen Components and Systems
- WK49750 - Revision of E2112-07 Standard Practice for Installation of Exterior Windows, Doors and Skylights
- WK4979 - New Standard Terminology Relating to Impact Testing for Sports and Sports Surfaces
- WK50069 - Revision of F2170-11 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
- WK50338 - New Guide for Standard Guide for the Selection of Test Methods and Security Ratings for Forced Entry and Ballistics Resistant (FEBR) Doors, Windows, Other Opening Protectives, Walls Ceilings, Roofs, and Other Fixed Barriers Comprising the Secure Parts of Building Exteriors and the Security Envelope of Secure Areas Inside Buildings
- WK50695 - Revision of D7754-11 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography
- WK50742 - New Practice for Standard Practice for Assessing the Durability of Membrane Forming Fluid-Applied Air and Water-Resistive Barriers
- WK50977 - Revision of F963-11 Standard Consumer Safety Specification for Toy Safety
- WK51202 - Revision of F963-11 Standard Consumer Safety Specification for Toy Safety
- WK51322 - Revision of D2726/D2726M-14 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
- WK51785 - Revision of D6699-01(2010) Standard Practice for Sampling Liquids Using Bailers
- WK52022 - New Test Method for Respirable/Releasable Fiber Concentration of Asbestos and Other Fibers using the Fluidized Bed Aerosol Segregator
- WK52250 - Revision of D2513-14e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- WK52711 - New Guide for Post-Remediation Verification (PRV) Following a Fungal Remediation Project
- WK52904 - New Guide for Standard Practice to design, conduct, and analyze sensory instrumental data relationships
- WK53099 - Revision of E2297-15 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods
- WK53122 - Revision of D5219-15 Standard Terminology Relating to Body Dimensions for Apparel Sizing
- WK53299 - Revision of E84-15b Standard Test Method for Surface Burning Characteristics of Building Materials
- WK53455 - Revision of D3244-12 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
- WK5427 - Revision of G15-04 Standard Terminology Relating to Corrosion and Corrosion Testing
- WK54272 - New Test Method for Evaluating Ground Response Robot Dexterity: Touch or Aim
- WK54273 - New Test Method for Evaluating Ground Response Robot Dexterity: Rotate
- WK54274 - New Test Method for Evaluating Ground Response Robot Dexterity: Extract and Place
- WK54276 - New Test Method for Evaluating Ground Response Robot Dexterity: Grasp Load, Traverse, and Place
- WK54278 - New Test Method for Evaluating Ground Response Robot Capabilities: Manipulation: Cut Strap
- WK54287 - New Test Method for Evaluating Ground Response Robot Dexterity: Inspect Underbody
- WK54289 - New Test Method for Evaluating Ground Response Robot Manipulation: Inspect Interior of Constrained Space
- WK54290 - New Test Method for Evaluating Ground Response Robot Manipulation: Break Panel
- WK5436 - New Guide for Extension of Data for Fire-Resistive Joint System Tests Conducted in Accordance with ASTM E1966
- WK54403 - New Test Method for Evaluating Ground Response Robot Mobility: Traverse Mud
- WK54591 - Revision of C1074-11 Standard Practice for Estimating Concrete Strength by the Maturity Method
- WK54619 - New Test Method for Standard Test Method for Using Temperature Rise as an Indication of Relative Time of Setting of Cementitious Mixtures
- WK54714 - New Practice for Standard Practice for Obstacle Course Events
- WK54798 - Revision of E2112-07(2016) Standard Practice for Installation of Exterior Windows, Doors and Skylights
- WK54813 - New Specification for Performance of In-Service Pavement Marking Paint
- WK54884 - New Practice for Holistic Quality Evaluation System for Translation
- WK54914 - Revision of D6868-11 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
- WK54919 - Revision of C840-13 Standard Specification for Application and Finishing of Gypsum Board
- WK55083 - New Practice for Describing and Specifying Inductively Coupled Plasma (Quadrupole) Mass Spectrometers
- WK55086 - New Guide for Design, Selection, and Application of Vehicle Security Barriers
- WK55146 - Revision of D3241-16 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK55223 - Revision of C1383-15 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
- WK55321 - New Guide for Sampling and Characterization of Municipal Single-Stream Recyclable Material
- WK55610 - New Test Methods for the Characterization of Powder Flow Properties for Additive Manufacturing Applications
- WK55620 - New Practice for Service Life Prediction of Polymeric Materials
- WK55633 - New Practice for Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Thermal Neutron Radiography
- WK55644 - Revision of E2298-15 Standard Test Method for Instrumented Impact Testing of Metallic Materials
- WK55795 - Revision of F1446-15b Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
- WK56027 - New Test Method for Erosion of Coatings by Flowing Water Slurry
- WK56255 - New Guide for Design and Production of Energy Storage Systems to Power Aircraft Propulsion
- WK56283 - New Guide for Recommendations on the selection, specification and installation of safety barriers and bollards
- WK5642 - Revision of F1487-01e1 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK56632 - New Test Method for Evaluating Equine Surface Footing Materials for Particle Size Distribution and Shape
- WK56652 - New Guide for Designation of Turfgrass Athletic Field Maintenance Programs
- WK56708 - Revision of E1745-11 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
- WK56843 - Revision of C685/C685M-14 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
- WK56860 - New Specification for for Nonpneumatic Limb Tourniquets
- WK56967 - New Classification for Standard Classification and Basis for Specifying Polyethylene Terephthalate Film and Thin Sheeting
- WK5703 - New Standard Practice for Body Measurement Exchange--Used for Apparel Sizing
- WK5710 - New Practice for /Guide for Friction Measurements of Aerodrome Runways
- WK57190 - New Test Method for Determining the Drainage Efficiency of Engineered Polymeric Drainage and Ventilation Materials Used as Part of a Rainscreen Assembly
- WK57191 - New Test Method for Determining the Ventilation Efficiency of Engineered Polymeric Drainage and Ventilation Materials Used as Part of a Rainscreen Assembly
- WK57359 - New Specification for Blast Overpressure Testing of Bomb Suits
- WK57480 - New Test Method for Measuring Volatile Organic Compounds (VOCs) in Water utilizing Headspace Analysis with Gas Chromatography and Mass Spectrometry (Headspace GC/MS)
- WK57512 - New Guide for Application of Hot-Applied Rubberized Asphalt for Roofing and Waterproofing
- WK57851 - New Specification for For Clothing and Equipment to Protect Workers engaged in welding, cutting, grinding and allied processes.
- WK57961 - Revision of D4647/D4647M-13 Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
- WK57967 - New Test Method for Evaluating Ground Response Robot Sensing: Thermal Image Acuity
- WK58069 - Revision of D93-16a Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- WK5810 - Revision of D976-04 Standard Test Methods for Calculated Cetane Index of Distillate Fuels
- WK58192 - New Practice for Determining Interior Surface Temperatures for Condensation Assessment of Fenestration Systems
- WK58243 - New Guide for Visual Inspection of Building Facade using Drone
- WK58244 - New Test Method for Standard Test Method for Steady-State Heat Transmission through Pipe Insulation Operating at Below-Ambient Temperatures
- WK58531 - New Guide for Qualitative Research Focus Groups and In-Depth Interviews
- WK58557 - New Test Method for Preparation and Reporting of Results for Water Vapor Transmission Property Testing of Preformed Pipe Insulation
- WK58677 - New Test Method for Evaluating Aerial Drone Sensing: Visual Image Acuity
- WK58695 - Revision of D6656-16 Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
- WK58931 - New Test Method for Evaluating Aerial Drone Maneuvering and Payload Functionality in Open Test Lanes and Related Scorable Scenarios
- WK58934 - New Test Method for Evaluating Aerial Response Robot Capabilities: Maneuvering: Fly Through Apertures
- WK58938 - New Test Method for Evaluating Aerial Drone Sensing: Map Wide Areas (Stitched Images)
- WK58940 - New Test Method for Evaluating Aerial Drone Maneuvering and Payload Functionality in Obstructed Lanes and Scenarios: Perch, Wall, Ground, Alley, and Post Tasks
- WK58941 - New Test Method for Evaluating Aerial Drone Maneuvering and Payload Functionality in Confined Lanes and Scenarios: Perch, Wall, Ground, Alley, and Post Tasks
- WK58963 - Revision of F1937-04(2010) Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
- WK59107 - Revision of E3069-17 Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall
- WK59121 - New Practice for an Extensible Nanoparticle Ontology
- WK5917 - New Standard Test Methods for Determining Flammability Limits Using Pressure Criteria
- WK59267 - New Test Method for Use of 2N1486 Silicon Bipolar Junction Transistors as Neutron Spectrum Sensors and 1-MeV(Si) Fluence Monitors
- WK59324 - New Guide for Design of Glass Railings and Guards and Balustrades
- WK59528 - Revision of F606/F606M-16 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- WK59549 - New Practice for Interoperability of DICONDE Presentation States
- WK59594 - Revision of F355-16e1 Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
- WK59648 - Revision of E209-00(2010) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
- WK59931 - Reinstatement of D5925-96e1 Standard Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems (Withdrawn 2005)
- WK60002 - New Classification for Performance of Electronic Sound Masking Systems when used in Building Spaces
- WK60301 - New Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation in Spray-Applied Applications
- WK60520 - New Test Method for Determining Compatibility of Personal Lubricants with Polyurethane Condoms
- WK60553 - New Test Method for Evaluating the Impact of Nanomaterials on Phagocytic Function in Vitro
- WK60585 - Revision of E344-16 Terminology Relating to Thermometry and Hydrometry
- WK60637 - Revision of C294-12(2017) Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
- WK60640 - New Guide for Standard Guide(Method) for Conducting Acute Water Column Toxicity Bioassays using Marine Calanoid Copepods
- WK60666 - New Practice for Direct Tension Testing of Fiber Reinforced Concrete
- WK60713 - Revision of F1875-98(2014) Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface
- WK60731 - New Test Method for Evaluating Response Robot Radio Communications: Wireless Attenuation
- WK60740 - New Practice for Standard Practice for Assessment of Rubber Glove Biodegradability
- WK60770 - New Test Method for Standard Test for Thermal Stability of Infill Material Used in Artificial Turf Sports Fields and Playgrounds
- WK60783 - New Test Method for Evaluating Ground Response Robot Sensing: Audio Speech Intelligibility
- WK60809 - New Specification for Colloidal Silica for Use in Concrete
- WK60885 - New Guide for Sensory Evaluation of Small Devices (guiding principles--non-specified product)
- WK60898 - Revision of F2931-17 Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products
- WK61119 - Revision of D6082-12(2017) Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils
- WK61155 - Revision of E209-00(2010) Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
- WK61161 - New Practice for Volumetric Computed Tomographic (CT) Examination
- WK61163 - Revision of E1935-97(2013) Standard Test Method for Calibrating and Measuring CT Density
- WK61319 - New Test Method for Moisture Determination for Petroleum Coke
- WK61352 - New Test Method for Measurement of Decomposition Products in Phosphate Ester Fluids by Linear Sweep Voltammetry
- WK61472 - New Specification for Magnesium Oxide Fibre-Mat Reinforced Cementitious Board Products
- WK61524 - Revision of D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
- WK61549 - New Specification for Indirect Flight Control Systems in Aircraft
- WK61614 - Revision of E2357-17 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
- WK61656 - Revision of D3249-95(2011) Standard Practice for General Ambient Air Analyzer Procedures
- WK61694 - New Specification for Wrought Nickel-Titanium Shape Memory Alloy Wire for Medical Devices and Surgical Implants
- WK61763 - New Guide for Training for Remote Pilot Instructor (RPI) of Unmanned Aircraft Systems (UAS) Endorsement
- WK61819 - Reinstatement of D5210-92(2007) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge (Withdrawn 2016)
- WK61856 - New Test Method for Hot Blowout and Thermal Cycling Performance for Polytetrafluoroethylene (PTFE) Sheet or Sheet-Like Gaskets
- WK61862 - Revision of D5957-98(2013) Standard Guide for Flood Testing Horizontal Waterproofing Installations
- WK61885 - Revision of D3574-17 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
- WK61894 - Revision of E2179-03(2016) Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
- WK61895 - Revision of E989-06(2012) Standard Classification for Determination of Impact Insulation Class (IIC)
- WK61896 - Revision of E492-09(2016)e1 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
- WK62095 - Revision of E704-13 Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
- WK62310 - Revision of D6377-16 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx?(Expansion Method)
- WK62365 - Revision of D2061-07(2013) Standard Test Methods for Strength Tests for Zippers
- WK62522 - New Practice for Standard Practice for Special Requirements for Bungee Jumping Operations
- WK62591 - New Specification for Shaped Wire, Compact Concentric-Lay-Stranded Aluminum Conductors, Composite Supported-Carbon Fiber Composite Core (ACCFCS/TW)
- WK62613 - New Classification for Knots Used In Rope Rescue
- WK62669 - New Test Method for Standard Guide for Testing Detect and Avoid Systems (DAA) for Unmanned Aircraft Systems (UAS)
- WK62734 - New Specification for Specification for the Development of Manufacturers Maintenance Data for Lightweight UAS
- WK62744 - New Practice for General Operations Manual for Professional Operator of Light Unmanned Aircraft Systems (UAS)
- WK62807 - Revision of G108-94(2015) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels
- WK6282 - New Standard Test Method for Deflections with a Lightweight Deflectometer
- WK6286 - New Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B20)1
- WK62959 - New Practice for Multiple-Attribute Sensory Temporal Methods
- WK62979 - Reinstatement of E1986-09(2013) Standard Guide for Information Access Privileges to Health Information (Withdrawn 2017)
- WK62980 - Reinstatement of E2595-07(2013) Standard Guide for Privilege Management Infrastructure (Withdrawn 2017)
- WK63003 - New Guide for Sampling of Building Water Systems for Legionella
- WK63005 - New Practice for Preparation of Bacillus Endospores for Testing
- WK63006 - New Practice for Preservation of Microbes used for Anti-Microbial Testing
- WK63061 - Revision of E1677-11 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
- WK63069 - New Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
- WK63070 - New Specification for Polyethylene (PE) Saddle Fittings for Vacuum-Assisted Heat Fusion Joining to Polyethylene (PE) Plastic Pipe
- WK63118 - New Specification for the Development of Maintenance Manuals for Light Sport Aircraft
- WK63173 - Revision of A312/A312M-17 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- WK63211 - New Practice for Heat fusion joining of polypropylene (PP) pipe and fittings
- WK63252 - New Test Method for Determination of Charring Depth of Wood Utility Poles Exposed to Simulated Wildland Fires
- WK63257 - Revision of F739-12e1 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact
- WK63286 - New Test Methods for Standard Methods for Testing, Limits, Uses, and Requirements of Magnesium Oxide Cementitious Board Products.
- WK63316 - New Practice for For Special Coatings for cast iron soil and fittings
- WK63337 - Revision of D2239-12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
- WK63339 - Revision of D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing
- WK63390 - New Test Method for Analysis of Carbon and Other Common Elements in Low/Medium Carbon Steel and in Stainless Steel by Hand Held Laser Induced Breakdown Spectroscopy
- WK63409 - New Specification for Combative Sports Gloves
- WK63450 - Revision of D6431-18 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Site Characterization
- WK63460 - Revision of D6430-18 Standard Guide for Using the Gravity Method for Subsurface Site Characterization
- WK63538 - New Practice for Estimating the Time Of Wetness Potential at an Outdoor Weathering Site using a Cotton Wick Sensor
- WK63730 - Revision of E2309/E2309M-16 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
- WK63749 - Revision of D245-06(2011) Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
- WK64034 - Reinstatement of D4879-08 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock (Withdrawn 2017)
- WK64097 - New Practice for Spinal Fusion Cage Computational Modeling
- WK64131 - New Practice for Evaluating the Transfer of Exterior Contaminants from Protective Clothing and Equipment During Doffing
- WK64225 - Revision of F1506-18 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK64270 - New Practice for Residual Stress in Structural Design and Sustainment
- WK64277 - Revision of C1315-11 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- WK64334 - New Test Method for Multiresidue Analysis of Pesticides in Dried Cannabis and Hemp Raw materials using Gas Chromatography-Tandem Mass Spectroscopy (GC-MS/MS)
- WK64340 - New Guide for D03 Presentation Template
- WK64471 - New Test Method for Assessment of Fungal Biomass on Surfaces or Coatings by Measuring Fungal -N-Acetylhexosaminidase (NAHA) Activity
- WK64555 - New Test Method for Determination of Acetoxime Number
- WK64894 - Revision of F2194-16e1 Standard Consumer Safety Specification for Bassinets and Cradles
- WK64906 - Revision of D1002-10 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
- WK64991 - New Practice for Stability of Early Phase Protein Products
- WK65007 - Revision of E3038-16 Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems
- WK65013 - New Test Method for Determination of Cannabinoid Concentration in Cannabis Using High Performance Liquid Chromatography
- WK65067 - New Practice for Assessment of Gas Chromatography and Electron Ionization Mass Spectrometry Data During the Qualitative Analysis of Seized Drugs
- WK65074 - Revision of D1876-08(2015)e1 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
- WK65198 - Revision of D5879/D5879M-18 Standard Practice for Surface Site Characterization for On-Site Septic Systems
- WK65231 - New Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester
- WK65237 - New Test Method for Slash Resistance of Protective Products Worn by Law Enforcement and Corrections
- WK65303 - Revision of D6836-16 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
- WK65304 - New Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Integral Suspension Pressure Method) Analysis
- WK65317 - Reinstatement of F2311-08 Standard Guide for Classification of Therapeutic Skin Substitutes (Withdrawn 2017)
- WK65344 - Revision of C1114-06(2013) Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
- WK65347 - New Guide for Utilization of Digital Human Modeling
- WK65477 - Revision of D8197-18 Standard Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower
- WK65513 - Revision of None Provided
- WK65615 - New Test Method for the Determination of Chemical Composition Distribution of Linear Polyolefins by Temperature Rising Elution Fractionation (TREF)
- WK65629 - Revision of F3239-18 Standard Specification for Aircraft Electric Propulsion Systems
- WK65690 - Revision of D3574-17 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
- WK65707 - New Test Method for for Partial Discharge Inception Voltage Measurement (PDIV) of Insulating Liquids Using Plane and Needle Electrodes
- WK65713 - New Specification for Torso and Limb Protection Worn by Civil Disturbance Unit Officers
- WK65717 - Revision of A216/A216M-18 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
- WK65752 - Revision of D2241-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
- WK65831 - New Practice for Measurement of Contact Area and Contact Pressure in Total Knee Replacements
- WK65916 - New Test Method for Dynamic Compression of Bulk Metallic Materials using a Split Hopkinson Pressure Bar / Kolsky Bar
- WK65929 - New Specification for Additive Manufacturing-Finished Part Properties and Post Processing - Additively Manufactured Spaceflight Hardware by Laser Beam Powder Bed Fusion In Metals
- WK65967 - New Guide for Binary Logistic Regression
- WK65978 - Revision of D6420-18 Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
- WK66028 - Revision of F3239-18 Standard Specification for Aircraft Electric Propulsion Systems
- WK66030 - New Guide for Quality Assessment of Metal Powder Feedstock Characterization Data for Additive Manufacturing
- WK66051 - New Test Method for Determining Ultimate Load and Failure Mode of Individual Mechanically Fastened Snow Retention Devices Attached to Wood Sheathing
- WK66073 - New Test Method for Laboratory Compaction Characteristics of Roller-Compacted Concrete Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
- WK66089 - Revision of E2159-15 Standard Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
- WK66135 - Revision of F3005-14a Standard Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS)
- WK66272 - Revision of E1130-16 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
- WK66288 - New Test Method for Evaluating the Oxidative Resistance of Polypropylene (PP) Piping Systems to Hot Chlorinated Water
- WK66300 - New Specification for Reports of Radioanalytical Laboratory Measurements
- WK66361 - Revision of D7843-18 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
- WK66419 - New Specification for High-Octane Unleaded Aviation Gasoline Test Fuel Containing an Oxygenated Component
- WK66556 - Reinstatement of D5503-94(2008) Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation (Withdrawn 2017)
- WK66567 - New Practice for Standard Practice for Sampling Compressed Natural Gas (CNG) Fuel Dispensers
- WK66568 - New Practice for Standard Practice for Sampling Liquefied Natural Gas (LNG) Fuel Dispensers
- WK66662 - New Guide for Standard Guide for Linear Detector Array Digital Radiography
- WK66692 - Revision of F2656/F2656M-18a Standard Test Method for Crash Testing of Vehicle Security Barriers
- WK66695 - Revision of C1126-18 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
- WK66708 - New Specification for Specification for Stabilization of Pavements using Geogrids
- WK66852 - Revision of D4595-17 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
- WK66935 - New Practice for Detection of Hydrocarbon Liquids in Soils by Fluorescence with the Optical Imaging Profiler Using Direct Push Methods
- WK67123 - Revision of D6978-05(2013) Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs
- WK67125 - Revision of D4945-17 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations
- WK67126 - Revision of D6348-12e1 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy
- WK67195 - New Test Method for Measuring the Erosion Function of a Soil in an Erosion Function Apparatus
- WK67359 - New Guide for Guide for General Use of Powdered Activated Carbons in Flue Gas Applications
- WK67560 - Revision of F3118-17a Standard Consumer Safety Specification for Infant Inclined Sleep Products
- WK67615 - New Specification for Copper Clad Aluminum Wire for Electrical Power Distribution and Grounding Applications
- WK67628 - Revision of C522-03(2016) Standard Test Method for Airflow Resistance of Acoustical Materials
- WK67648 - New Practice for Evaluating and Treating Sound Flanking in Buildings
- WK67712 - Revision of E1105-15 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
- WK67716 - Revision of F1820-13 Standard Test Method for Determining the Forces for Disassembly of Modular Acetabular Devices
- WK67759 - New Guide for Accelerated Combined Effects Simulation Testing for Corrosion
- WK67768 - New Guide for Decanting of Oil/Water Mixtures
- WK67780 - New Guide for Measurement and Test Equipment for Remotely Operated Facilities
- WK67812 - Revision of C51-18 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
- WK6791 - Revision of G148-97(2003) Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique
- WK67946 - New Practice for Surface Sampling of Selected Organic Compounds for Worker Protection
- WK67957 - Revision of E9-09(2018) Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
- WK6797 - Revision of D6878-03 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
- WK67973 - New Test Method for Measurement of Ethylene Oxide in Ambient Atmospheres
- WK67980 - New Test Method for Quantifying Poly(ethylene glycol) Coating on the Surface of Gold Nanostructured Materials Using High Performance Liquid Chromatography with Evaporative Light Scattering Detection (HPLC/ELSD)
- WK68187 - Revision of A915/A915M-08(2018) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
- WK68224 - New Guide for Resistance Thermometer Manual
- WK68300 - Revision of D4643-17 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
- WK68305 - Revision of D5080-17 Standard Test Method for Rapid Determination of Percent Compaction
- WK68309 - Revision of D6758-18 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
- WK68310 - Revision of D6780/D6780M-12 Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)
- WK68311 - Revision of D6938-17a Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
- WK68316 - Revision of D7830/D7830M-14 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
- WK68380 - New Guide for Standard guide to metrological traceability and its applicability
- WK68411 - New Guide for Minimizing Heavy Metal Accumulation in Metalworking Fluids.
- WK68428 - New Test Method for Determination of Cannabinoid Concentration in Cannabis Using Low Pressure Liquid Chromatography
- WK68489 - New Test Method for Conducting Atmospheric Pressure Carbon Steel Rotating Cylinder Electrode in 3.5 NaCl Solution Saturated with Carbon Dioxide
- WK68536 - Revision of F2389-17a Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
- WK68574 - New Guide for Determination of Cannabinoid Concentrations in Cannabis Plant Material, Extracted Oil, and Gummies Using Near-Infrared (NIR) Spectroscopy
- WK68586 - New Test Method for Detection of Microbial DNA in the Products of Biotechnology
- WK68604 - Revision of B928/B928M-15 Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
- WK68628 - Revision of D1560-15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus
- WK68732 - New Test Method for Thiophenic and non-Thiophenic Sulfur Impurities in Styrene Monomer by Gas Chromatography and Sulfur Chemiluminescence Detector
- WK68781 - Revision of F3083/F3083M-18 Standard Specification for Emergency Conditions, Occupant Safety and Accommodations
- WK68795 - Revision of F3066/F3066M-18 Standard Specification for Aircraft Powerplant Installation Hazard Mitigation
- WK68803 - Revision of F3064/F3064M-18a Standard Specification for Aircraft Powerplant Control, Operation, and Indication
- WK68805 - Revision of F3114-15 Standard Specification for Structures
- WK68866 - New Test Method for Determination of Adsorbable Organic Fluorine in Waters and Waste Waters by Adsorption on Activated Carbon followed by Combustion Ion Chromatography
- WK68890 - New Practice for Standard Practice for Rehabilitation of Existing Building Drain, Waste and Vent Piping Using a Cured-In-Place Pipe (CIPP) Lining System
- WK68919 - Revision of C114-18 Standard Test Methods for Chemical Analysis of Hydraulic Cement
- WK68925 - New Test Method for Measurement of Wet Retroreflectivity Using a Mobile Retroreflectometer
- WK69051 - New Test Method for Assessing the Activation of the Complement System in Human Plasma Through Quantification of iC3b Concentration by ELISA,
- WK69186 - Revision of A1064/A1064M-18a Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
- WK69199 - New Guide for Protocol for the Verification of Stormwater Filtration Devices using Silica Sediment
- WK69255 - New Practice for Performing Positive Material Identification (PMI)
- WK69595 - New Guide for Describing Type Standardization for Elemental Analysis by Spark Atomic Emission Spectrometry and X-Ray Fluorescence Spectrometry
- WK69596 - New Guide for Creating a Performance Based Test Method
- WK69613 - Revision of C979/C979M-16 Standard Specification for Pigments for Integrally Colored Concrete
- WK69625 - New Test Methods for High-temperature fire-resistance for tunnel and/or other high-intensity fire accessories
- WK69726 - Revision of F3254-19 Standard Specification for Aircraft Interaction of Systems and Structures
- WK69732 - New Guide for Additive Manufacturing -- Wire Arc Additive Manufacturing
- WK69750 - Revision of F894-19 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
- WK69826 - New Guide for Template for Environmental Monitoring (EM) Trend Report
- WK69860 - New Test Method for the Determination of the Sample Size to Use in Testing Medical Devices
- WK69872 - New Guide for Standard Guide for Crime Scene Photography
- WK69936 - Revision of A351/A351M-18e1 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
- WK69974 - Revision of A480/A480M-18a Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- WK69975 - New Test Method for Determination of Saturated Hydraulic Conductivity of Field Soils by Sealed Single-Ring Infiltrometer and Multiple Pressure Head Procedure
- WK70031 - New Practice for Clinically Relevant Preconditioning of Polymer-based Bearing Materials for Non-Clinical Testing of Joint Arthroplasty Devices
- WK70032 - Revision of F2396-11 Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
- WK70043 - New Specification for the Safety of Targeted Individuals During Deployment of Less Lethal Impact Devices used by Law Enforcement
- WK70054 - New Practice for Specifying Energy Absorbing Anchors for Blast Resistant Facade Elements
- WK70132 - New Guide for Determination of Fermentation-derived Protein
- WK70135 - New Practice for New Standard for Sensory Evaluation of Coffee and Tea Products
- WK70143 - New Guide for Sampling Methods of Tissue Engineered Medical Products for Microbiological Safety Testing
- WK70226 - New Test Method for Field Test of Conductive Suits
- WK70227 - New Practice for Bodyflight/Indoor Skydiving
- WK7025 - Revision of F1148-03 Standard Consumer Safety Performance Specification for Home Playground Equipment
- WK70254 - New Guide for Mixing Layer Height from Ceilometer
- WK70258 - New Practice for Standard Practice for Permanent Amusement Railway Ride On-Track Vehicles
- WK70265 - New Guide for Process to assess the effectiveness of PFAS water treatment
- WK70293 - New Test Method for Analysis of Asbestos in Vermiculite - Analysis Method
- WK70295 - Revision of E779-19 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
- WK70297 - Revision of E779-19 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
- WK70360 - New Guide for Establishing the Relationship Between Primary Barrier Packaging Material Attributes and Performance
- WK70366 - Revision of E2877-12(2019) Standard Guide for Digital Contact Thermometers
- WK70410 - New Test Method for Formula for a Cleaning Agent Intended to Clean Clinically-Used Stainless Steel Medical Device Soiled with Dried Blood
- WK70416 - New Practice for On-Site Identification of Penetration Firestop Systems and Fire-Resistive Joint Systems and Perimeter Fire Barriers
- WK70439 - New Practice for Pull Testing Permanent Magnet Assemblies
- WK70462 - Revision of A1071/A1071M-11(2015) Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys
- WK70466 - New Specification for Supplementary Cementitious Material for Use in Concrete
- WK70469 - New Guide for Drift Correction
- WK70499 - New Guide for Inspection and Maintenance of Commercially Installed Indoor Gymnasium Equipment
- WK70508 - New Specification for MgO ceramic-cement board, uses, applications, types and sizes
- WK70523 - Revision of F2650-17e1 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
- WK70524 - New Practice for Aeroelastic Compliance Demonstration
- WK70526 - Revision of E143-13 Standard Test Method for Shear Modulus at Room Temperature
- WK70527 - Revision of E328-13 Standard Test Methods for Stress Relaxation Tests for Materials and Structures
- WK70531 - Revision of E290-14 Standard Test Methods for Bend Testing of Material for Ductility
- WK70550 - New Test Method for Insulative Hempcrete Initiative
- WK70611 - Revision of F1275-14 Standard Test Method for Performance of Griddles
- WK70616 - Revision of F2142-01(2019) Standard Test Method for Performance of Drawer Warmers
- WK7068 - Revision of D5907-03 Standard Test Method for Filterable and Nonfilterable Matter in Water
- WK70724 - New Specification for Commercial Electric-Powered Scooters for Adults
- WK70758 - Revision of F3306-19 Standard Test Method for Ion Release Evaluation of Medical Implants
- WK70807 - New Practice for the On-Site Inspection of Installed Board and Wrap Type Fireproofing
- WK70825 - Revision of D8110-17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
- WK70840 - Revision of D3685/D3685M-13 Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
- WK70851 - New Practice for Standard Practice for the On-Site Inspection of Installed Spray-Applied Fire Resistive Materials
- WK70852 - New Practice for the On-Site Inspection of Installed Intumescent Fire Resistive Materials
- WK70921 - Revision of F2194-16e1 Standard Consumer Safety Specification for Bassinets and Cradles
- WK70955 - New Guide for Standard Guide for Evaluation of Changes to the Thermal, Moisture and Ventilation Performance of Existing Roof Enclosures (with Vented or Sealed Attic or Rafter Spaces)
- WK70956 - Revision of D7675-15 Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer
- WK70964 - New Test Method for Bench-scale Evaluation of Flame Resistant Clothing Materials for Protection Against Fire Simulations.
- WK70985 - New Specification for Transition Mats
- WK70992 - New Practice for Sustainability Assessment for Single-Ply Roofing Membranes
- WK71034 - New Test Method for Laboratory method to measure the impact force on fitness flooring
- WK71070 - New Specification for Wet Retroreflectivity of Pavement Markings
- WK71071 - Revision of E3097-17 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys
- WK71095 - New Practice for Preparation of Asphalt Mixture Samples for Performance-Related Testing
- WK71245 - Revision of F3099-19 Standard Practices for Parasailing
- WK71317 - Revision of D5671-95(2019) Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light
- WK71375 - New Guide for Additive Manufacturing Qualification principles Part 1 :Qualification of Machine operators for metallic parts production
- WK71378 - New Guide for Additive manufacturing -- Qualification principles -- Part 4: Qualification of machine operators for metallic parts production for DED-LB
- WK71379 - New Guide for Additive manufacturing -- Qualification principles -- Part 5: Qualification of machine operators for metallic parts production for DED-Arc
- WK71384 - New Test Methods for Determination of the Soluble Salt Contamination of a Blast Cleaned Steel Surface Using the Saturated Filter Paper Sampling Method
- WK71391 - New Guide for Additive Manufacturing -- Static Properties for Polymer AM (Continuation)
- WK71407 - Reinstatement of D6066-11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential (Withdrawn 2020)
- WK71408 - Revision of C204-18e1 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
- WK71428 - Revision of F1506-19 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK71479 - Revision of C1315-19 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- WK71511 - Revision of E2698-18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays
- WK71550 - New Practice for Practice for Computed Tomographic Examination of Additive Manufactured Parts
- WK71555 - Revision of E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers
- WK71565 - Revision of D412-16 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
- WK71643 - New Test Method for Fluid Leakage Resistance of Glove and Protective Clothing Interface
- WK71681 - New Guide for reproducible low-frequency acoustical measurements in reverberation rooms
- WK71734 - New Guide for Ethylene Oxide Gas Sensor/Analyzer Use for Ethylene Oxide Sterilization
- WK71770 - Revision of D4972-19 Standard Test Methods for pH of Soils
- WK71784 - New Test Method for Standard Method for Calibration and Usage of Scintillation Detector Systems
- WK71785 - New Test Method for WK71785 - Calibration and Usage of Alpha Detector Systems
- WK71786 - New Practice for Beta Counting Methods including Aluminum Absorption Curve
- WK71787 - New Test Method for Alpha Counting Methods
- WK71788 - New Test Method for WK71788 - Liquid Scintillation Counting Methods
- WK71807 - Revision of A370-19e1 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- WK71835 - Revision of E1958-19a Standard Guide for Sensory Claim Substantiation
- WK71849 - Revision of A488/A488M-18e1 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
- WK71875 - New Practice for Standard Practice for Sampling and Testing Synthetic Turf Fiber and Fabric for PFAS
- WK71880 - Revision of A781/A781M-18c Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- WK71881 - Revision of A957/A957M-18a Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- WK71882 - Revision of A985/A985M-19 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- WK71887 - Revision of A743/A743M-19 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
- WK71888 - Revision of E1261 Standard Practice for Calibration of Routine Dosimetry Systems for Radiation Processing
- WK71902 - New Test Method for Measuring the Electrical Resistivity of Coarse Grained Material in a Laboratory
- WK71997 - New Guide for Resilience-Based Design of Culverts Exposed to Flood Events
- WK72001 - Revision of E1814-14 Standard Practice for Computed Tomographic (CT) Examination of Castings
- WK72003 - Revision of D2321-18 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- WK72011 - New Practice for Evaluating Drainage of an Existing EIFS with Drainage Clad Wall Assembly
- WK72188 - Revision of C390-08(2019) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
- WK72208 - New Specification for Safety Requirements for Tricycles
- WK72215 - Revision of E2339-15 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
- WK72263 - New Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend (SCB) Test at Intermediate Temperatures Fabricated by a 100 mm Marshall Hammer
- WK72273 - New Specification for Consumer Safety Specification for Weighted Blankets
- WK72293 - New Guide for Standard Guide for Definition of Combination Products (Drug / Device / Biologic Combinations)
- WK72379 - Revision of D8248-20 Standard Terminology for Smart Textiles
- WK72424 - Revision of E1787-16 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
- WK72431 - Revision of D5386-16 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
- WK72432 - Revision of E475-16 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
- WK72436 - New Specification for Arc Flash Suits and Arc Rated Multi-layer Garments Worn by Workers Exposed to Flames and Electric Arcs
- WK72441 - New Practice for Standard Practice for Developing Discipline Specific Methodology for ACE-V
- WK72469 - Revision of F1814-15 Standard Guide for Evaluating Modular Hip and Knee Joint Components
- WK72475 - New Practice for Real-time Dust Monitoring at Construction, Demolition, and Other Fugitive Dust Emission Sites.
- WK72480 - New Guide for Standard Guide for Operational Qualification of Accelerator-Based Electron Beam Irradiators
- WK72526 - New Practice for Standard Practice for Expert Opinions on the Interpretation of Primer Gunshot Residue (pGSR) Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
- WK72581 - Revision of E413-16 Classification for Rating Sound Insulation
- WK72630 - New Guide for The Development of Electron Ionization-Mass Spectral Libraries for the Analysis of Seized Drugs
- WK72636 - Revision of A416/A416M-18 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
- WK72637 - Revision of A1061/A1061M-16 Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
- WK72639 - Revision of F141-12(2020) Standard Terminology Relating to Resilient Floor Coverings
- WK72708 - Revision of D7186-14 Standard Practice for Quality Assurance Observation of Roof Construction and Repair
- WK72709 - New Practice for Preparing Concrete Slabs to Receive Adhered (Bonded) Roofing Systems
- WK72726 - Revision of B946-11(2016) Standard Test Method for Surface Finish of Powder Metallurgy (PM) Products
- WK72727 - New Test Method for Microscopy to Determine Equine Surface Sand and Fiber Shape
- WK72762 - New Practice for the Certification of Equine Surfaces
- WK72781 - Revision of F3117/F3117M-19 Standard Specification for Crew Interface in Aircraft
- WK72782 - New Practice for Environmental Odor Assessment Using Odorant Prioritization with Solid Phase Microextraction (SPME) Air Sampling, Multidimensional Gas Chromatography-Mass Spectrometry (MDGC-MS) Olfactometry Analysis and Synthetic Odor-Matching Validation
- WK72819 - Revision of C739-17 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
- WK72887 - New Guide for Application of Safety Risk Management to Exoskeletons
- WK72932 - New Guide for Forensic Glass Analysis and Comparison
- WK72962 - New Test Method for Measuring the performance of a 3D perception system across the specified Field-of-View
- WK73001 - New Test Method for Determining the Volumetric Moisture Content of Equine Surfaces
- WK73002 - New Test Method for Determining the Bulk Density of Equine Surfaces
- WK73004 - New Test Method for Fiber Removal and Fiber Characterization in Equine Surfaces
- WK73005 - New Test Method for Determining the Total Organic Content by Mass of Equine Surfaces
- WK73008 - Revision of F3120/F3120M-19 Standard Specification for Ice Protection for General Aviation Aircraft
- WK73009 - Revision of F3310-18 Standard Specification for Non-Essential Ice Detectors for Aircraft
- WK73013 - Revision of F3179/F3179M-18 Standard Specification for Performance of Aircraft
- WK73014 - Revision of F3180/F3180M-19 Standard Specification for Low-Speed Flight Characteristics of Aircraft
- WK73015 - Revision of F3083/F3083M-19 Standard Specification for Emergency Conditions, Occupant Safety and Accommodations
- WK73017 - Revision of F3114-19 Standard Specification for Structures
- WK73019 - Revision of F3116/F3116M-18e1 Standard Specification for Design Loads and Conditions
- WK73040 - Revision of F3316/F3316M-19 Standard Specification for Electrical Systems for Aircraft with Electric or Hybrid-Electric Propulsion
- WK73074 - New Guide for Evaluating Potential Ergonomic Risks From Exoskeleton Use
- WK7312 - Revision of D244-04 Standard Test Methods and Practices for Emulsified Asphalts
- WK73159 - Revision of E328-13 Standard Test Methods for Stress Relaxation Tests for Materials and Structures
- WK73176 - New Test Methods for Determination of a 3D Perception Systems Point Wise Spatial Resolution
- WK73227 - New Guide for Additive Manufacturing -- Investigation for Additive Manufacturing (AM) Facility Safety Management
- WK73236 - New Specification for Additive Manufacturing -- Qualification principles -- Qualification of coordinators for metallic parts production
- WK73239 - New Classification for Additive manufacturing -- Qualification principles -- Classification of part properties for additive manufacturing of polymer parts
- WK73270 - Revision of D8270-20 Standard Terminology Relating to Cannabis
- WK73273 - Revision of F3268-18a Standard Guide for in vitro Degradation Testing of Absorbable Metals
- WK73310 - Revision of C1728-20 Standard Specification for Flexible Aerogel Insulation
- WK73327 - New Classification for Standard Classifications for Rubber Compounding Materials - Devulcanized Rubber
- WK73338 - New Test Method for Measuring the Friction of Pavements and Other Trafficked Surfaces Using the Technique of Continuous Reading from an RT3 Curve CFME Fixed Side Slip Angle Device
- WK73340 - New Test Method for Additive Manufacturing -- Dynamic Properties -- Polymer Additive Manufacturing
- WK73343 - Revision of D7028-07(2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
- WK73384 - New Test Method for Evaluating the Tensile Performance of Fiber-Reinforced Concrete Using Cylindrical Specimens with Double-Punch Loading
- WK73424 - New Guide for The Assessment of Biodegradable Rubber Gloves
- WK73438 - New Practice for Examination of Off the Road (OTR) Wheel and Rim Assemblies on Off-Road Machinery at Site
- WK73442 - Revision of E2005-10(2015) Standard Guide for Benchmark Testing of Reactor Dosimetry in Standard and Reference Neutron Fields
- WK73468 - New Specification for First Responder All-Hazards Reusable, Elastomeric Half-Mask Air Purifying Respirator
- WK73482 - New Practice for Reporting Results and Opinions of Ignitable Liquids Analysis
- WK73484 - New Practice for Reporting Results and Opinions of Explosives Analysis
- WK73487 - New Guide for the Support Waste from Lysimeter Testing
- WK73625 - Revision of E1142-15(2020) Standard Terminology Relating to Thermophysical Properties
- WK73646 - Reinstatement of D7046-11 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration (Withdrawn 2020)
- WK73647 - Revision of D146/D146M-04(2012)e1 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
- WK73667 - Revision of D6164/D6164M-16 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
- WK73676 - Revision of D7845-20 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
- WK73680 - Revision of D5726-98(2013) Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
- WK73681 - Revision of D6225/D6225M-98(2020) Standard Test Method for Granule Cover of Mineral-Surfaced Roofing
- WK73682 - Revision of D7051-05(2013) Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
- WK73697 - New Test Method for Assessing Physical Resistance in Turfgrass Equine Surfaces
- WK73751 - Revision of D6432-19 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
- WK73764 - New Guide for Process Validation Requirements in the Cannabis Industry
- WK73788 - Revision of D5147/D5147M-18 Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- WK73835 - New Guide for Spaceflight Participant Safety and Emergency Training
- WK73842 - Revision of D5280-96(2013) Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions
- WK73844 - Revision of D6694/D6694M-15 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
- WK73889 - Revision of D287-12b(2019) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)
- WK73926 - Revision of D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
- WK73927 - Revision of F2475-20 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
- WK73978 - New Specification for Additive Manufacturing-General Principles-Registration of Process-Monitoring and Quality-Control Data
- WK74006 - New Specification for (Additive manufacturing -- Data formats -- Specification for optimized medical image data
- WK74176 - New Guide for Management of PFAS released into Wastewater Streams.
- WK74182 - New Test Method for Characterizing Mode-I Interfacial Fracture Toughness of Adhesives with Composite Adherends
- WK74211 - Revision of D1835-20 Standard Specification for Liquefied Petroleum (LP) Gases
- WK74216 - New Test Method for Staining Resistance to Fluids and Solids
- WK74271 - Revision of F2057-19 Standard Safety Specification for Clothing Storage Units
- WK74288 - Revision of C825-19 Standard Specification for Precast Concrete Barriers
- WK74302 - New Specification for Additive manufacturing for construction -- process characteristics and performance -- specification for manufactured polymeric UV cured structures for residential applications
- WK74343 - Revision of E2658-15 Standard Practices for Verification of Speed for Material Testing Machines
- WK74360 - New Test Method for Evaluating CO2 Indoor Air Quality Sensors or Sensor Systems Used in Indoor Applications
- WK74395 - Revision of D420-18 Standard Guide for Site Characterization for Engineering Design and Construction Purposes
- WK74405 - New Practice for Releasability of Fibers from Surfaces of Asbestos Cement Products by MicroVacuum and Phase Contrast Microscopy
- WK74406 - New Practice for Determination of Asbestos Minerals using Scanning Electron Microcopy and Electron Back Scattering Diffraction technique.
- WK74407 - New Test Method for Automated Counting of Fibers in Prepared Air Sample Filters using Phase Contrast Microscopy
- WK74409 - New Test Method for Determination of Mineral Fibers in Tissue/Pathology by TEM
- WK74412 - New Guide for Critical Airflow Visualization
- WK74418 - Revision of D2435/D2435M-11(2020) Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
- WK74436 - New Practice for Microplastic characterisation from Air using thermal desorption
- WK74491 - Revision of F1674-18 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
- WK74575 - Revision of D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- WK74608 - Revision of D7028-07(2015) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
- WK74612 - Revision of E2671-10(2016) Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property
- WK74622 - New Guide for Performance Qualification Dose Mapping in Gamma Radiation Processing Facilities
- WK74694 - New Practice for Inspection of Wet Lay-Up Fiber-Reinforced Polymer (FRP) Systems and Application for Repairs and Strengthening of Civil Structures
- WK7476 - New Standard Specification for Liquid-Applied, Single-Component, Moisture-Triggered, Aliphatic Polyurethane Roofing and Waterproofing Membranes
- WK74861 - Revision of A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete
- WK74878 - Revision of A941-18 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK74923 - New Test Method for Determining Rock Shear Strength in a Borehole with a Borehole Shear Device
- WK74931 - New Specification for Additive Manufacturing of Metals -- Feedstock Materials -- Powder Life Cycle Management
- WK74932 - New Specification for Additive Manufacturing of metals -- Qualification principles -- Qualification of designers
- WK74970 - New Test Method for Evaluation of the Extent of Oxidation in Polyolefin Piping by Using Infrared Spectroscopy to Determine a Ketone Carbonyl Index.
- WK75063 - Revision of D8334/D8334M-20 Standard Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses
- WK75116 - Revision of A74-20 Standard Specification for Cast Iron Soil Pipe and Fittings
- WK75153 - New Specification for Polyethylene (PE) Pressure Pipe Bends (Elbows) in Nominal Diameters 8-inch to 36-inch (219mm 915mm), Fabricated From Thick Wall Gore-Pipe by Heat Fusion Joining of Miter-cut or Machined Segments, or by Thermo-Forging
- WK75193 - New Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Wave Generation Equipment within Surf Venues
- WK75230 - Revision of D4175-20b Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
- WK75231 - New Practice for Standard Guide for Assessment of Fourier Transform Infrared (FTIR) Spectroscopy Data During the Qualitative Analysis of Seized Drugs
- WK75240 - New Guide for Very-high cycle fatigue testing of metallic materials at ambient and elevated temperatures
- WK75265 - New Guide for Additive Manufacturing of Polymers -- Powder Bed Fusion -- Guidelines for Feedstock Recycling and Sampling Strategies
- WK75270 - Revision of E230/E230M-17 Standard Specification for Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
- WK75419 - New Classification for Classification for Distilled Cannabinoid Extracts of a Cannabis Plant
- WK75503 - Revision of E2886/E2886M-20 Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
- WK75538 - Reinstatement of D5921-96(2010) Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems (Withdrawn 2019)
- WK75546 - Revision of E8/E8M-16ae1 Standard Test Methods for Tension Testing of Metallic Materials
- WK75595 - Revision of F2676-19 Standard Test Method for Determining the Protective Performance of an Arc Protective Blanket for Electric Arc Hazards
- WK75606 - Revision of E1981-98(2020) Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
- WK75607 - New Guide for Characterization of Encapsulation, Extraction, and Analysis of RNA in Lipid Nanoparticle Formulations for Drug Delivery
- WK75656 - Revision of E1006-13 Standard Practice for Analysis and Interpretation of Physics Dosimetry Results from Test Reactor Experiments
- WK75671 - New Guide for the Development of Building Specific Maintenance and Repair Protocols for Building Enclosure Systems
- WK75742 - New Test Methods for Exoskeleton Use: Mobility Over Variable Terrains
- WK75792 - Revision of E1018-20e1 Standard Guide for Application of ASTM Evaluated Cross Section Data File
- WK75797 - New Test Method for Non-Floating Biodegradable Plastics Designed for use in an Aquatic Environment
- WK75827 - New Specification for 1,1,1,2,2,4,4,5,5,5-nonafluoro-4-(trifluoromethyl)-3-pentanone, FK-5-1-12 (CF3CF2C(O)CF(CF3)2 )
- WK75865 - New Test Method for Response of a deck assembly to an under-deck flame impingement exposure
- WK75878 - New Practice for Handling, Transportation and Storage of Blend 55 E-1-chloro-3,3,3-trifluoropropene, 1,1,1,2,2,4,5,5,5-Nonafluoro-4-(trifluoromethyl)-3-pentanone (E-CF3CH=CHCl, CF3CF2C(O)CF(CF3)2 )
- WK75880 - Revision of E2998-16 Standard Practice for Characterization and Classification of Smokeless Powder
- WK75881 - Revision of E2999-17 Standard Test Method for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
- WK75889 - Revision of D4644-16 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks
- WK75890 - Revision of D5731-16 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
- WK75892 - Revision of D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
- WK75893 - Revision of D7070-16 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
- WK75901 - New Test Method for Additive Manufacturing -- Test Artifacts -- Miniature Tension Testing of Metallic Materials
- WK75902 - Revision of E2860-20 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels
- WK75916 - New Test Methods for Hemp Fiber Initiative
- WK75923 - New Specification for Positioning Assurance, Navigation, and Time Synchronization for Unmanned Aircraft Systems
- WK75978 - New Guide for Standard Guide and Model for Assessing User Cognition and Intent during Exoskeleton Use (U-CI)
- WK75994 - New Practice for Establishment and Maintenance of Storage Conditions for Packaged Resin Cannabis Product Prior to Distribution or Sale
- WK76002 - Revision of E492-09(2016)e1 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
- WK76003 - Revision of E1007-19 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
- WK76012 - Revision of F2291-20 Standard Practice for Design of Amusement Rides and Devices
- WK76013 - New Practice for Implementing a Cannabis Transportation Program in a Cannabis Operation
- WK76034 - New Guide for the recommendation of specific test methods and conditions to support application of C1174 approach for glass/glass-ceramic waste form materials
- WK76038 - New Test Method for Additive Manufacturing of Metals -- Non-destructive testing and evaluation -- Porosity Measurement with X-ray CT
- WK76044 - New Guide for Exercising a Contextual Framework for Increasingly Autonomous Aviation Systems
- WK76067 - Revision of F3173/F3173M-18 Standard Specification for Aircraft Handling Characteristics
- WK76082 - New Test Method for Bench-Scale Evaluation of Flame-Resistant Gloves for Protection Against Fire Simulations (Hand Form Method)
- WK76113 - New Practice for Handling, Transportation, and Storage of Iodotrifluoromethane
- WK76116 - Revision of A957/A957M-20 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
- WK76118 - Revision of D4044/D4044M-15 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
- WK76121 - Revision of D3350-14 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- WK76144 - New Guide for Application of Speech Privacy Metrics in Healthcare Environments
- WK76163 - New Test Method for Additive Manufacturing -- Test Artifacts -- Compression Validation Coupons for Lattice Designs
- WK76194 - Reinstatement of E2369-12 Standard Specification for Continuity of Care Record (CCR) (Withdrawn 2021)
- WK76195 - Revision of D5269-15 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
- WK76196 - Revision of D6030-15 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
- WK76222 - New Guide for Software, Configuration, and Database Management Technician Endorsement
- WK76263 - New Test Method for Determining Carbon Intensity via Regenerative Agriculture Process
- WK76281 - Revision of E2128-20 Standard Guide for Evaluating Water Leakage of Building Walls
- WK76290 - New Test Method for the determination of Platinum in Non Zeolitic gamma Alumina based Fresh or Used Petrochemical catalyst
- WK76297 - New Practice for GMP Implementation of Advanced Process Control (APC) in Commercial Manufacturing
- WK76298 - New Test Method for Software Safety Standard
- WK76320 - Revision of F3407-20 Standard Test Method for Respirator Fit Capability for Negative-Pressure Half-Facepiece Particulate Respirators
- WK76322 - New Test Method for Measurement of Sub-micron Particulate Filtration Efficiency for Wearable Filter-Based Products against Solid Particulates
- WK76338 - Revision of F1506-20a Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK76373 - Revision of F1886/F1886M-16 Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
- WK76379 - Revision of F1554-20 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
- WK76407 - Revision of E2812-17 Standard Practice for Uniform Data Management in Asset Management Records Systems
- WK76416 - Revision of D1000-17 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
- WK76420 - Revision of F2648/F2648M-20 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
- WK76424 - Revision of F3401-19 Standard Test Method for Wax Binder Removal from Equestrian Synthetic Track Surfaces
- WK76434 - Revision of F2306/F2306M-20 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
- WK76460 - New Guide for PFAS Data Evaluation Guidance
- WK76468 - New Practice for DNA Extraction in Environmental Water Samples
- WK76481 - Reinstatement of D2845-08 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock (Withdrawn 2017)
- WK76503 - New Guide for Captioning
- WK76508 - Revision of E283/E283M-19 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
- WK76510 - Revision of E783-02(2018) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
- WK76534 - New Guide for Preparation of E33 Precision and Bias Statements
- WK76565 - New Test Method for Standard Practice for Marking Indelibility
- WK76567 - New Guide for Standard Guide for Cross-Cultural Consumer Product Testing
- WK76588 - Revision of E1105-15 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
- WK76622 - Revision of D6786-15 Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters
- WK76685 - Revision of D4978-16 Standard Test Methods for Screening of Reactive Sulfides in Waste
- WK76724 - Revision of F748-16 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices
- WK76726 - Revision of F895-11(2016) Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
- WK76754 - New Guide for Selecting and Using (Rapid) Sensory Characterisation Methods
- WK76762 - Revision of E220-19 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
- WK76776 - Revision of D5262-21 Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes
- WK76802 - New Specification for Resin Cannabis Product Packages and Containers
- WK76863 - Revision of E2235-04(2020) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
- WK76888 - Revision of E1428-15a Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptomyce species (A Pink Stain Organism)
- WK76915 - New Terminology for Terminology for Climate and Community.
- WK76932 - Revision of F2880-14 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3/4 in. to 65 in.
- WK76945 - Revision of D2472-15 Standard Specification for Sulfur Hexafluoride
- WK76949 - New Test Method for Test Method for Evaluation of Gouge Resistance of Resilient Floor Coverings
- WK76951 - Revision of D6820-20 Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation
- WK76964 - Reinstatement of C672/C672M-12 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)
- WK76969 - Revision of A977/A977M-07(2020) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
- WK76970 - New Guide for Additive Manufacturing -- General Principles -- Guidelines for Technical and Intellectual Property Authentication and Protection
- WK77008 - New Guide for Additive Manufacturing -- Laser Powder Bed Fusion -- Guide for Benchmarking of Powder Bed Density
- WK77048 - New Specification for Reverberation Room Requirements
- WK77063 - New Test Method for Tensile Properties of Geohazard Nettings
- WK77076 - Revision of E1012-19 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
- WK77097 - Revision of F2182-19e2 Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
- WK77098 - New Practice for External Loads and Aeroelastic Compliance Demonstration for multimodal VTOL/eVTOL aircraft
- WK77108 - Revision of D5762-18a Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
- WK77137 - Revision of F2581-12(2017) Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
- WK77167 - Revision of A941-18 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK77169 - New Practice for Measurement of fluorescent materials using hemispherical geometries
- WK77170 - Revision of A380/A380M-17 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
- WK77171 - Revision of A967/A967M-17 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
- WK77188 - Revision of F3353-19 Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries
- WK77212 - Reinstatement of D3999/D3999M-11e1 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus (Withdrawn 2020)
- WK77229 - Revision of F2089-15 Standard Practice for Language Interpreting
- WK77233 - New Practice for Enterprise Risk Management and Resilience Integration
- WK77234 - Revision of D7928-21 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis
- WK77263 - New Test Method for X-ray Spectrometric Analysis of Lime and Limestone by Energy Dispersive instruments
- WK77266 - Withdrawal of D2167-15 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
- WK77283 - New Specification for General Aviation Inflatable Restraints
- WK77297 - New Guide for Reference Radiographs and Digital Reference Images
- WK77313 - Revision of D4439-20 Standard Terminology for Geosynthetics
- WK77314 - Revision of D4439-20 Standard Terminology for Geosynthetics
- WK77317 - Revision of D4439-20 Standard Terminology for Geosynthetics
- WK7736 - New GUIDE FOR THE DETERMINATION OF IODINE-129 IN URANIUM OXIDE
- WK77374 - Revision of G179-04(2019) Standard Specification for Metal Black Panel and White Panel Temperature Devices for Natural Weathering Tests
- WK77395 - Revision of E3246-21 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
- WK77424 - Revision of E2260-21 Standard Guide for Repointing (Tuckpointing) Historic Masonry
- WK77425 - Revision of E1857-97(2021) Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
- WK77429 - New Practice for Statistical Sampling for Weathering Exposures
- WK77434 - New Test Method for Analysis of Surface swab samples for Fungi by direct microscopy
- WK77444 - Revision of E1053-20 Standard Practice to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces
- WK77461 - Revision of D3306-20 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
- WK77530 - New Practice for Core Forensic Responsibilities Training
- WK77546 - Revision of C94/C94M-21 Standard Specification for Ready-Mixed Concrete
- WK77584 - Revision of F2461-20a Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
- WK77585 - New Test Method for Available Sulfide in Water by Gas Extraction
- WK77596 - New Guide for Standard Guide for cleaning of clinical exoskeletons
- WK77601 - Revision of B551/B551M-12(2017) Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate
- WK77661 - New Test Method for Water Resistance
- WK77680 - Revision of D8270-21a Standard Terminology Relating to Cannabis
- WK77688 - New Practice for the Real-Time Full-Length Monitoring of the Interface Temperature of a Cured-In-Place Pipe During the Curing Process
- WK77707 - Revision of F3458-21 Standard Specification for Marketing, Packaging, and Labeling Adult Magnet Sets Containing Small, Loose, Powerful Magnets (with a Flux Index =50?kG2?mm2)
- WK7774 - New Terminology for Building Enclosure System Materials, Assemblies, and Systems
- WK77773 - New Guide for Standard Guide for Decommissioning and Disposal of Hospitals
- WK77776 - Revision of E84-21a Standard Test Method for Surface Burning Characteristics of Building Materials
- WK77797 - New Guide for Resilience-Based Design of Culverts Exposed to Wildfire Events
- WK77802 - Revision of B557-15 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- WK77803 - Revision of B557M-15 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
- WK77819 - New Practice for Predicting the Performance of Coal Fly Ash and other Supplementary Cementitious Materials for Use in Concrete
- WK77851 - Revision of E143-20 Standard Test Method for Shear Modulus at Room Temperature
- WK77855 - New Guide for Development and Execution of Usability Evaluations in Medical Packaging
- WK77929 - Revision of E633-21 Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing
- WK78037 - Revision of B962-17 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle
- WK78039 - Revision of E3200-21 Standard Guide for Investment Analysis in Environmentally Sustainable Manufacturing
- WK78042 - Revision of A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing
- WK78047 - Revision of E3087-18 Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods
- WK78060 - New Specification for Manufactured In-Place Composite Pipe (MICP) Inside Pipelines
- WK78084 - Revision of F1413/F1413M-18 Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
- WK78085 - Revision of F1460/F1460M-18 Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
- WK78087 - Revision of F2926-18 Standard Guide for Selection and Operation of Vessel-mounted Camera Systems
- WK78091 - New Guide for Identification of Risks Associated with the Manufacturing and Use of Absorbable Polymer Based Implants
- WK78110 - New Guide for Additive Manufacturing -- General Principles -- Development and Roadmapping of Additive Construction Standards
- WK78130 - Revision of D7698-21 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
- WK78156 - Reinstatement of D3761-10 Standard Test Method for Total Fluorine in Coal by the Oxygen Bomb Combustion/Ion Selective Electrode Method (Withdrawn 2019)
- WK78158 - Revision of D7430/D7430M-21 Standard Practice for Mechanical Sampling of Coal
- WK78170 - Revision of E298-17a Standard Test Methods for Assay of Organic Peroxides
- WK78171 - Revision of E359-17 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
- WK78172 - Revision of E538-17a Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
- WK78174 - Revision of E299-17a Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
- WK78180 - Revision of E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
- WK78216 - Revision of D4052-18a Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
- WK78224 - New Test Method for Additive Manufacturing -- Vat Photopolymerization -- Next Generation Tensile Test Method
- WK78235 - Revision of F1550-16 Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
- WK78278 - New Guide for the Accelerated Degradation of Hydrolysable Absorbable Polymers
- WK78289 - Revision of F963-17 Standard Consumer Safety Specification for Toy Safety
- WK78298 - Revision of D1241-15 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
- WK78322 - New Guide for Additive Manufacturing -- General Principles -- Guidelines for AM Security
- WK78365 - New Test Method for Determining Walkability of Steep-slope Underlayments
- WK78367 - New Guide for the Standard Practice for Evaluating Nighttime Retroreflective Sheeting Effectiveness using Positive-Contrast Textual Sign Scenario Performance Analysis
- WK78378 - New Specification for Additive Manufacturing for Automotive -- Qualification Principles -- Generic Machine Evaluation and KPI Definition for PBF-LB/M Processes
- WK78401 - Revision of A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
- WK78424 - New Test Method for Measuring the Air Leakage Rate of the Building Envelope of a Portion of a Multizone Building
- WK78425 - Revision of D7464-20 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
- WK78429 - Revision of C1227-20 Standard Specification for Precast Concrete Septic Tanks
- WK78433 - New Practice for Risk Assessment for Amusement Rides and Devices
- WK78434 - New Test Method for Creation of Study Group for Method Development of FID and FID-MS Detailed Hydrocarbon Analysis
- WK78435 - Revision of D1655-21a Standard Specification for Aviation Turbine Fuels
- WK78450 - Revision of A488/A488M-18e2 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
- WK78453 - Revision of E2497-11(2017) Standard Practice for Calculation of Asset Movement Velocity (AMV)
- WK78465 - New Specification for Additive Manufacturing for Medical- Non-destructive Testing and Evaluation-Test Method for Evaluation of Porous Structures in Medical Implants via Computed Tomography Scanning
- WK78466 - Revision of E1574-98(2014) Standard Test Method for Measurement of Sound in Residential Spaces
- WK78504 - Revision of F877-20 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
- WK78506 - Revision of E2885-21 Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications
- WK78518 - Revision of E2299-13(2021) Standard Guide for Sensory Evaluation of Products by Children and Minors
- WK78519 - Revision of G88-13e1 Standard Guide for Designing Systems for Oxygen Service
- WK78520 - New Guide for Selecting Sensory Discrimination Methods
- WK78522 - New Practice for Standard Practice for Cleaning Glass and Plastic Labware
- WK78529 - Revision of E3033-16 Standard Guide for Beneficial Use of Landfills and Chemically Impacted Sites
- WK78546 - Revision of D7706-17 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers
- WK78557 - New Test Method for Cyclic Fatigue Testing of Posterior-Stabilized Tibial Bearing Components
- WK78558 - Withdrawal of D7688-18 With Replacement null
- WK78583 - New Practice for Collection of Microbial Material from Surfaces by Micro-vacuum
- WK78585 - New Guide for Security Engineering: Procedures for Designing Airborne Chemical, Biological and Radiological Protection for Buildings
- WK78595 - New Guide for the Design of Clean in Place-Friendly Equipment for Pharmaceutical and Biopharmaceutical Applications (CbD Clean by Design).
- WK78599 - Revision of F2291-21 Standard Practice for Design of Amusement Rides and Devices
- WK78600 - Revision of D4844-16 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
- WK78609 - New Terminology for Suffixes to the PE Thermoplastic Pipe Material Designation (TPMD) Code for Polyethylene [Pipe and Fittings or Piping]
- WK78612 - Revision of C119-20 Standard Terminology Relating to Dimension Stone
- WK78613 - Revision of C1046-95(2013) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
- WK78614 - Revision of C1199-14 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
- WK78634 - Revision of D8-21 Standard Terminology Relating to Materials for Roads and Pavements
- WK78667 - New Guide for Advancing Stalled Corrective Action Sites Toward Site Closure
- WK78713 - Revision of E1825-21 Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems
- WK78729 - New Test Method for Standard Test Method for Sieve Analysis of Hemp Hurd
- WK78732 - Revision of E2997-16 Standard Test Method for Analysis of Biodiesel Products by Gas Chromatography-Mass Spectrometry
- WK78736 - Revision of E2329-17 Standard Practice for Identification of Seized Drugs
- WK78746 - Revision of E3246-21 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials
- WK78747 - New Guide for Forensic Examination of Fibers
- WK78748 - New Practice for a Forensic Fiber Training Program
- WK78764 - Revision of A522/A522M-14(2019)e1 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
- WK78769 - Revision of D4674-19 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
- WK78770 - Revision of F1854-15 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
- WK78773 - Revision of E3166-20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build
- WK78801 - Revision of F3063/F3063M-21 Standard Specification for Aircraft Fuel Storage and Delivery
- WK78808 - Revision of E2266-11(2019) Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
- WK78812 - New Test Method for Measurement of Particle Size and Shape of Additive Manufacturing Base Materials by Dynamic Imaging Analyzers
- WK78825 - Revision of D3685/D3685M-13(2021) Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases
- WK78832 - New Test Method for Mixed Mode I-Mode II Fracture Toughness of Sandwich Constructions
- WK78868 - Revision of A416/A416M-18 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
- WK78886 - New Test Method for As-worn Fogging Testing of Plano Protective Eyewear as a Complete Device
- WK78891 - New Specification for Asphalt Shingles Containing Post-Consumer Recycled Content
- WK78914 - Revision of E2133-03(2020) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
- WK78941 - New Test Method for Performance of machine vision systems for bin-picking systems
- WK78956 - Revision of G86-17 Standard Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
- WK78974 - New Guide for Pre-clinical Testing Considerations for Materials Used to Regenerate Muscle following Volumetric Muscle Loss Injuries
- WK78977 - Revision of F3328-18 Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
- WK78993 - Revision of F2713-18 Standard Specification for Eye Protectors for Field Hockey
- WK78994 - Revision of F3077-17 Standard Specification for Eye Protectors for Women’s Lacrosse
- WK80019 - New Guide for Standard Guide for Design Elements and Requirements for Exoskeletons
- WK80024 - Revision of B578-21 Standard Test Method for Microindentation Hardness of Electroplated Coatings
- WK80035 - Revision of E328-21 Standard Test Methods for Stress Relaxation for Materials and Structures
- WK80038 - New Test Method for Proficiency Test Plan for the Characterization and Evaluation of High-Dose Dosimetry Techniques in Radiation Processing
- WK80041 - New Specification for Review insulators for temperatures above 1750 C.
- WK80083 - New Practice for Good Medicinal Cannabis Cultivation
- WK80133 - Revision of E2624-17 Standard Practice for Torque Calibration of Testing Machines
- WK80158 - New Specification for Storage Chests used for household items that do not require the use of a sealed storage space.
- WK80171 - New Guide for Additive Manufacturing of Metals -- Feedstock Materials -- Measurement and Classification of Feedstock Contamination
- WK80172 - New Guide for Lyophilization Process Validation
- WK80180 - Revision of D7205/D7205M-21 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
- WK80182 - Revision of E1519-16(2020) Standard Terminology Relating to Agricultural Tank Mix Adjuvants
- WK80208 - Revision of F2009-20 Standard Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
- WK80240 - New Practice for Special Requirements for Mountain Coasters
- WK80243 - New Test Method for Analysis of Arsine in Gaseous Hydrocarbons by Dry Colorimetry
- WK80281 - Revision of D7522/D7522M-21 Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates
- WK80282 - New Test Methods for Determination of CO2 in Cements and Concretes
- WK80293 - New Test Method for Third-Body Adverse Hip Simulator Wear Testing of Metal-on-Polymer Articulations
- WK80309 - Revision of D8076-21b Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines
- WK80332 - Revision of E2847-21 Standard Test Method for ? ?Calibration and Accuracy Verification of Wideband Infrared Thermometers
- WK80334 - Revision of D6235-18 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
- WK80340 - Revision of D6639-18 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations
- WK80352 - Revision of D5390-93(2013) Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes
- WK80354 - Revision of D5413-93(2013) Standard Test Methods for Measurement of Water Levels in Open-Water Bodies
- WK80355 - Revision of D5388-93(2013) Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method
- WK80428 - Revision of D2850-15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
- WK80430 - Revision of D2850-15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
- WK80431 - Revision of D2850-15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
- WK80447 - New Guide for The Sampling of Field and Bulk Harvest Lots of Cannabis and Hemp for Laboratory Analyses
- WK80451 - Revision of F3158-21 Standard Practice for Patron Transportation Conveyors Used with a Water Related Amusement Ride or Device
- WK80475 - New Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices: Simulated In-vivo conditions
- WK80486 - Revision of D7241-13 Standard Test Method for Pile Thickness of Finished Multilevel Pile Yarn Floor Covering
- WK80513 - New Test Method for Strip Tensile Properties of Hybrid Geosynthetic Paving Mat for Highway Applications
- WK80528 - New Test Method for Determine the Degree of Disintegration of Items under Defined In-Field Composting Conditions
- WK80544 - Revision of D6971-09(2014) Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry
- WK80557 - Revision of F2077-18 Test Methods For Intervertebral Body Fusion Devices
- WK80563 - New Practice for Determination of Laminated Glass Effective Thickness
- WK80595 - Revision of F3146-18 Standard Test Method for Impact Attenuation of Turf Playing Systems Designated for Rugby
- WK80642 - New Test Method for Standard Test Method for Traction and Wear Testing with a Mini traction machine Test Instrument
- WK80657 - Revision of D5030/D5030M-21 Standard Test Methods for Density of In-Place Soil and Rock Materials by the Water Replacement Method in a Test Pit
- WK80664 - Revision of E1297-18 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Niobium
- WK80665 - Revision of E2110-17 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- WK80666 - Revision of E2568-17a Standard Specification for PB Exterior Insulation and Finish Systems
- WK80669 - Revision of F2847-17 Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments
- WK80707 - Withdrawal of F2048-00(2017) Standard Practice for Reporting Slip Resistance Test Results
- WK80728 - Revision of F2291-21 Standard Practice for Design of Amusement Rides and Devices
- WK80732 - Revision of C1697-21 Standard Specification for Blended Supplementary Cementitious Materials
- WK80737 - Revision of D4404-18 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
- WK80743 - Revision of F2291-21 Standard Practice for Design of Amusement Rides and Devices
- WK80748 - Revision of F2291-21 Standard Practice for Design of Amusement Rides and Devices
- WK80749 - Revision of F2291-21 Standard Practice for Design of Amusement Rides and Devices
- WK80755 - Revision of D3240-15 Standard Test Method for Undissolved Water In Aviation Turbine Fuels
- WK80764 - New Test Method for the Application of Mercury Porosimetry for the Determination of Pore Volume and Pore Size Distribution of Porous Ceramics
- WK80765 - Revision of D2896-21 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration
- WK80768 - Withdrawal of C500/C500M-07(2019) Standard Test Methods for Asbestos-Cement Pipe
- WK80769 - Withdrawal of C541/C541M-98(2019) Standard Specification for Linings for Asbestos-Cement Pipe
- WK80770 - Withdrawal of C551/C551M-07(2019) Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
- WK80771 - Withdrawal of C1096/C1096M-07(2019) Standard Test Method for Determination of Wood Fiber in Asbestos Cement
- WK80772 - Withdrawal of D299/D299M-04(2017) Standard Specification for Asbestos Yarns
- WK80776 - Withdrawal of D1118/D1118M-95(2017) Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
- WK80777 - Withdrawal of D2946-01(2018) Standard Terminology for Asbestos and Asbestos–Cement Products
- WK80778 - Withdrawal of D2947/D2947M-88(2019) Standard Test Method for Screen Analysis of Asbestos Fibers
- WK80800 - Revision of F2291-21 Standard Practice for Design of Amusement Rides and Devices
- WK80812 - New Guide for Defining and categorizing modeling approaches to support source characterization for indoor exposure assessment of consumer products
- WK80825 - Revision of D8117-21 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry
- WK80826 - Revision of D5721-22 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
- WK80827 - Revision of F2777-16 Standard Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
- WK80854 - New Specification for Waterless Dielectric Coolants for Electric Vehicles.
- WK80871 - New Practice for Evaluating Water-Miscible Metalworking Fluid Foaming Tendency by Recirculation testing
- WK80877 - Revision of A623-16 Standard Specification for Tin Mill Products, General Requirements
- WK80878 - Revision of A623M-16 Standard Specification for Tin Mill Products, General Requirements [Metric]
- WK80894 - Reinstatement of D1575-13 Standard Test Method for Fiber Length of Wool in Scoured Wool and in Card Sliver (Withdrawn 2022)
- WK80903 - Reinstatement of D519-04(2013) Standard Test Method for Length of Fiber in Wool Top (Withdrawn 2022)
- WK80940 - Revision of F3055-14a(2021) Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion
- WK80947 - Revision of F1223-20 Standard Test Method for Determination of Total Knee Replacement Constraint
- WK80948 - Revision of C578-19 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- WK80956 - Reinstatement of D5079-08 Standard Practices for Preserving and Transporting Rock Core Samples (Withdrawn 2017)
- WK80957 - New Practice for Reporting and Classifying Cleanliness with Respect to Particulate Matter in Pharmaceutical Processes
- WK80979 - New Test Method for Measuring the Solar Heat Gain Coefficient of Fenestration Systems Using Calorimetry Hot Box Methods
- WK81013 - Revision of F1805-20 Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
- WK81016 - Revision of E2428-15a Standard Practice for Calibration and Verification of Torque Transducers
- WK81017 - Revision of E2190-19 Standard Specification for Insulating Glass Unit Performance and Evaluation
- WK81039 - Revision of F1506-20a Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK81058 - New Test Method for Fatigue Testing of Humeral Stems
- WK81065 - Revision of D6032/D6032M-17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
- WK81070 - Revision of D1631-10(2018)e1 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method
- WK81077 - Revision of E1409-13(2021) Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion
- WK81100 - Revision of F697-16 Standard Practice for Care and Use of Athletic Mouth Protectors
- WK81114 - New Practice for Additive Manufacturing — Standard Practice — Design Process of Additive Construction Elements
- WK81117 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK81119 - Revision of F477-14(2021) Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- WK81127 - New Specification for Aramid Fiber Reinforced Flexible Fabric-Reinforced Pipe (FFRP) for Loose-fit Non-Interactive Pressure Pipeline Rehabilitation
- WK81128 - New Specification for Flexible Fabric Reinforced (FFRP) Connectors for Pressure Pipeline Rehabilitation
- WK81129 - New Practice for Installation of Aramid Fiber Reinforced FFRP for the Rehabilitation of Pressure Pipelines
- WK81137 - Revision of F2136-18 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
- WK81157 - Revision of D2639/D2639M-21a Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer
- WK81174 - Revision of A424/A424M-18 Standard Specification for Steel, Sheet, for Porcelain Enameling
- WK81176 - New Specification for Wearable Blankets & Swaddles Intended for Use by Infants and Toddlers
- WK81194 - New Specification for Additive Manufacturing -- Qualification Principles -- Part Families-based Qualification in AM
- WK81220 - Revision of D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight
- WK81247 - New Guide for Selection of 3D Vision Technologies for Industrial Applications
- WK81266 - New Practice for Measuring the Electrical Resistivity of Conductive Geosynthetic Products for the Purpose of Electrical Leak Location Testing
- WK81267 - New Test Method for Exoskeleton Use: Confined Space: Vertical Movement
- WK81274 - Revision of C1364-19 Standard Specification for Architectural Cast Stone
- WK81281 - Revision of E609-21 Standard Terminology Relating to Pesticides
- WK81282 - Revision of F2970-20 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- WK81307 - Revision of D709-17 Standard Specification for Laminated Thermosetting Materials
- WK81308 - New Practice for Adventure Challenge Attractions
- WK81311 - Revision of E1512-01(2015) Standard Test Methods for Testing Bond Performance of Bonded Anchors
- WK81324 - Revision of E2943-15(2021) Standard Guide for Two-Sample Acceptance and Preference Testing With Consumers
- WK81368 - Revision of D5006-11(2021) Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
- WK81369 - New Practice for Nighttime Photometric Performance of Retroreflective Visibility Enhancements for Garments
- WK81371 - New Test Method for Determination of Water in Liquefied Petroleum Gas (LPG) using Gas Chromatography and Barrier Discharge Ionization Detection (BID)
- WK81372 - Revision of F2194-16e1 Standard Consumer Safety Specification for Bassinets and Cradles
- WK81385 - Revision of C1304-18 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
- WK81393 - New Practice for Phase I Karst Site Assessment
- WK81396 - Revision of E8/E8M-21 Standard Test Methods for Tension Testing of Metallic Materials
- WK81418 - Revision of F857-17 Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
- WK81424 - Revision of C1060-11a(2015) Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
- WK81427 - Revision of D5581-07A(2021)e1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)
- WK81432 - Revision of E2495-18 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition
- WK81441 - New Test Method for Shoulder Exoskeleton Assessment using Electromyography
- WK81443 - Revision of C805/C805M-18 Standard Test Method for Rebound Number of Hardened Concrete
- WK81449 - New Test Method for For the determination of additives in insulating liquids - Part 1 - Determination of phenolic antioxidants using liquid chromatography (LC)
- WK81460 - Revision of B243-22 Standard Terminology of Powder Metallurgy
- WK81462 - New Specification for Additive manufacturing of metals -- Powder bed fusion -- Presentation of material properties in material data sheets
- WK81471 - Revision of D7328-17 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
- WK81507 - New Specification for Standard Specification for Adhesives for Joining Poly(Vinyl Chloride) (PVC) Plastic DWV (Drain, Waste, & Vent) Pipe and Fittings1
- WK81524 - Revision of F1166-21 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
- WK81525 - New Specification for Home Compostable/Backyard Conditions for Plastic Packaging Materials and Products
- WK8156 - Revision of E2032-99e1 Standard Guide for Extension of Data From Fire Endurance Tests
- WK81561 - Revision of D8244-21a Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry
- WK81571 - New Guide for Conducting an Interlaboratory Study to determine Precision Estimates for an Acoustics Test Method with Fewer than Six Participating Laboratories
- WK81586 - Revision of E2121-21 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
- WK81597 - Revision of E966-18a Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements
- WK81610 - New Practice for Development and validation of test methods to quantify particulate matter on the surfaces of single-use assemblies designed for use in biopharmaceutical manufacturing
- WK81612 - Revision of F3328-18 Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
- WK81616 - Revision of E1732-22 Standard Terminology Relating to Forensic Science
- WK81622 - Revision of B931-14(2018)e1 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts
- WK81624 - Revision of F3181-16 Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post- Consumer Recycled HDPE
- WK81629 - Revision of F887-20 Standard Specifications for Personal Climbing Equipment
- WK81630 - Revision of F887-20 Standard Specifications for Personal Climbing Equipment
- WK81631 - Revision of F887-20 Standard Specifications for Personal Climbing Equipment
- WK81632 - Revision of A623-22 Standard Specification for Tin Mill Products, General Requirements
- WK81633 - Revision of A623M-22 Standard Specification for Tin Mill Products, General Requirements [Metric]
- WK81640 - Withdrawal of E1863-18 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
- WK81648 - New Guide for Pre- and Post-Coating Heat Treatments of Steel (Stress Relief and Baking) for Reducing the Risk of Internal Hydrogen Embrittlement
- WK81669 - New Specification for PVC Drain Basin for Gravity Flow Storm Water
- WK81681 - Revision of F2634-15(2021) Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
- WK81684 - Revision of E2893-16e1 Standard Guide for Greener Cleanups
- WK81688 - Revision of F17-20 Standard Terminology Relating to Primary Barrier Packaging
- WK81691 - New Test Method for a Rotational Methodology with a Head/Neck System
- WK81710 - New Test Method for Additive Manufacturing of Polymers -- Material Extrusion -- Test method for Shear Properties
- WK81715 - New Test Method for Method for Quantification of Emissions of Air Pollutants from Stationary Sources Using Mobile Optical Remote Sensing.
- WK81720 - Revision of E1618-19 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
- WK81724 - New Classification for Ignitable Liquids
- WK81750 - New Test Method for Chemical Assessment of Air Cleaning Technologies
- WK81757 - Revision of E1461-13(2022) Standard Test Method for Thermal Diffusivity by the Flash Method
- WK81758 - Revision of E3063-17 Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
- WK81783 - New Test Method for Nuclear Waste Glass Static Dissolution Testing to Determine Stage III Rates
- WK81797 - Revision of F1975-15 Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
- WK81812 - Revision of D1036-99(2017) Standard Test Methods of Static Tests of Wood Poles
- WK81821 - Revision of F770-21a Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- WK81824 - Revision of E288-10(2017) Standard Specification for Laboratory Glass Volumetric Flasks
- WK81844 - New Specification for Uranium Hexafluoride Enriched From More Than 8 % to Less Than 20 % 235U
- WK81847 - Revision of F2291-21 Standard Practice for Design of Amusement Rides and Devices
- WK81853 - Revision of G178-16 Standard Practice for Determining the Activation Spectrum of a Material (Wavelength Sensitivity to an Exposure Source) Using the Sharp Cut-On Filter or Spectrographic Technique
- WK81856 - Revision of B1021-21 Standard Test Method for Peel Resistance of Metal Sheets Joined by High Strength Bonds
- WK81858 - Revision of D6400-21 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
- WK81866 - Revision of F3211-17 Standard Guide for Fatigue-to-Fracture (FtF) Methodology for Cardiovascular Medical Devices
- WK81873 - New Practice for the Determination of an Index of Merit for Distributions of Color-Differences
- WK81881 - Revision of F1216-21 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
- WK81882 - Revision of F2019-20 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method
- WK81884 - Revision of D5813-04(2018) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
- WK81890 - New Practice for Apparatus, Method, and Software Evaluation for the Thermal Effusivity Measurment
- WK81898 - New Practice for the Determination of Thermal Penetration Depth by Thermal Analysis
- WK81903 - Revision of D6871-17 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
- WK81908 - Revision of ISO/ASTM51607-13 Standard Practice for Use of the Alanine-EPR Dosimetry System
- WK81913 - Revision of ISO/ASTM51702-13(2021) Standard Practice for Dosimetry in a Gamma Facility for Radiation Processing
- WK81922 - Revision of D2832-92(2016) Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings
- WK81929 - Revision of B495-22 Standard Specification for Zirconium and Zirconium Alloy Ingots
- WK81931 - Revision of A493-16 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
- WK81945 - Revision of F1580-18 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
- WK81966 - Revision of D7036-16 Standard Practice for Competence of Air Emission Testing Bodies
- WK81970 - Revision of E3142-18a Standard Test Method for Thermal Lag of Thermal Analysis Apparatus
- WK81991 - Revision of F3140-17 Standard Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Unicondylar Knee Joint Replacements
- WK81994 - New Practice for Additive Manufacturing -- Powder Bed Fusion -- In-situ Defect Mitigation and Evaluation
- WK82019 - New Guide for Cleaning and Disinfecting Water and Fertigation Systems in Cannabis Cultivation Facilities
- WK82028 - Revision of D5656-10(2017) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
- WK82036 - Revision of D7267-19a Standard Test Method for Edge Ravel Resistance of Finished Loop Pile, Pile Yarn Floor Covering
- WK82055 - New Test Method for Determining Fire Resistance of Joint Systems Installed Between Interior Rated Wall Assemblies and Exterior Nonrated Wall Assemblies
- WK82059 - Revision of F3516-22 Standard Guide for Testing Interpreting Performance
- WK82065 - New Specification for Desiccant for Maintaining Conditions within Packaging
- WK82077 - New Guide for Thermistors
- WK82097 - Revision of E1005-21 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance
- WK82099 - Revision of A262-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- WK82113 - Revision of D523-14(2018) Standard Test Method for Specular Gloss
- WK82114 - Revision of D8-22 Standard Terminology Relating to Materials for Roads and Pavements
- WK82116 - Revision of F2959-21 Standard Practice for Aerial Adventure Courses
- WK82121 - Revision of F2959-21 Standard Practice for Aerial Adventure Courses
- WK82124 - Revision of F2908-18 Standard Specification for Unmanned Aircraft Flight Manual (UFM) for an Unmanned Aircraft System (UAS)
- WK82137 - Revision of B912-02(2018) Standard Specification for Passivation of Stainless Steels Using Electropolishing
- WK82150 - Revision of E645-18 Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems
- WK82166 - Revision of B637-18 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
- WK82168 - Revision of B670-07(2018) Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service
- WK82173 - Revision of B730-08(2018) Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube
- WK82187 - Revision of D2974-20e1 Standard Test Methods for Determining the Water (Moisture) Content, Ash Content, and Organic Material of Peat and Other Organic Soils
- WK82190 - Revision of D8249-19 Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
- WK82195 - Revision of D1997-20 Standard Test Method for Laboratory Determination of the Fiber Content of Peat and Organic Soils by Dry Mass
- WK82200 - New Guide for Assessing Non-Implanted Items for Safety in the Magnetic Resonance Environment Outside an MR System
- WK82210 - Revision of E263-18 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Iron
- WK82218 - Revision of E2881-18 Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry
- WK82222 - Revision of C1433M-20 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
- WK82224 - Revision of E844-18 Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance
- WK82251 - Revision of E262-17 Standard Test Method for Determining Thermal Neutron Reaction Rates and Thermal Neutron Fluence Rates by Radioactivation Techniques
- WK82274 - Revision of F1342/F1342M-05(2022) Standard Test Method for Protective Clothing Material Resistance to Puncture
- WK82276 - Revision of D5385/D5385M-20 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
- WK82290 - New Practice for Pulsed Eddy Current Examination of Ferromagnetic Materials
- WK82296 - New Practice for Describing and Specifying Inductively Coupled Plasma (Quadrupole) Mass Spectrometers
- WK82302 - Revision of B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus
- WK82314 - Revision of C219-20a Standard Terminology Relating to Hydraulic and Other Inorganic Cements
- WK82316 - Revision of C142/C142M-17 Standard Test Method for Clay Lumps and Friable Particles in Aggregates
- WK82320 - New Test Method for Additive Manufacturing -- Feedstock Materials -- Tensile Testing Method for Filaments used in Material Extrusion
- WK82335 - Revision of E1209-18 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process
- WK82351 - New Test Method for Test Method for Non-Contact Measurement of Resonances of Concrete Cylinders
- WK82360 - New Practice for Selection, installation and testing of Under-Vehicle Inspection Systems
- WK82370 - Revision of D6691-17 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
- WK82432 - New Specification for Specification for Ethyl Levulinate Burner Fuel
- WK82433 - Revision of A510/A510M-20 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
- WK82436 - Revision of E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing
- WK82462 - Revision of E2007-10(2016) Standard Guide for Computed Radiography
- WK82502 - Revision of D7351/D7351M-21 Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
- WK82504 - Revision of D8107-18 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
- WK82508 - New Test Method for Determining Side Force Friction on Paved Surfaces Using a Tire at 20 Degrees to Measure Sideway Force Coefficient (SFC)
- WK82512 - Revision of D2372-85(2015) Standard Practice for Separation of Vehicle From Solvent-Reducible Paints
- WK82515 - Revision of D2621-87(2016) Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints
- WK82516 - New Specification for Wrought Nickel-Titanium Based Shape Memory Alloys for Actuation
- WK82519 - New Specification for Tractor Hydraulic Fluid
- WK82528 - Revision of F2057-19 Standard Safety Specification for Clothing Storage Units
- WK82534 - Revision of D128-98(2019) Standard Test Methods for Analysis of Lubricating Grease
- WK82536 - New Practice for Determining the Impact of an Asphalt Additive on Unaged Asphalt Binder Rheology using Dynamic Shear Rheometer
- WK82543 - Revision of C1562-10(2018) Standard Guide for Evaluation of Materials Used in Extended Service of Interim Spent Nuclear Fuel Dry Storage Systems
- WK82551 - New Specification for Liquid Applied Linoleum Floor Covering
- WK82558 - Revision of D7873-20 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120?°C Without the Inclusion of Water (Dry TOST Method)
- WK82570 - New Specification for New sheath materials or coatings for N2, 02, H2
- WK82577 - Withdrawal of E2121-21 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
- WK82597 - New Test Method for Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Free Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- WK82604 - New Guide for Standard Guide for Plastic Waste Pyrolysis Oil Analyses
- WK82605 - New Specification for Additive Manufacturing – General Principles -- Metal Laser Beam Powder Bed Fusion Machines for Spaceflight Applications
- WK82607 - New Test Method for Sieve Analysis of Granular Infill Materials Used in Artificial Turf Surfaces
- WK82611 - Revision of C561-16 Standard Test Method for Ash in a Graphite Sample
- WK82612 - Revision of C562-15 Standard Test Method for Moisture in a Graphite Sample
- WK82613 - Revision of E1316-22a Standard Terminology for Nondestructive Examinations
- WK82614 - Revision of A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
- WK82628 - New Test Method for Additive manufacturing — Qualification principles — Test method of sand mold for metal casting
- WK82645 - Withdrawal of C500/C500M-07(2019) Standard Test Methods for Asbestos-Cement Pipe
- WK82656 - New Test Method for Additive manufacturing — General principles — Main characteristics and corresponding test methods
- WK82659 - New Specification for Additive manufacturing -- Powder bed fusion -- Standard specification for maraging steel (UNS K93120)
- WK82665 - Revision of E631-15 Standard Terminology of Building Constructions
- WK82685 - Revision of F3338-21 Standard Specification for Design of Electric Engines for General Aviation Aircraft
- WK82689 - New Practice for Field Collection of Airborne Particulate Samples for Subsequent Lead Determination
- WK82697 - Revision of D5882-16 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
- WK82709 - Revision of F2291-22 Standard Practice for Design of Amusement Rides and Devices
- WK82712 - Revision of E3058-16 Standard Test Method for Determining the Residual Kill Activity of Hand Antiseptic Formulations
- WK82755 - New Specification for Standard Tire for use on Side Force Pavement Skid-Resistance Tests1
- WK82782 - Revision of F3002-14a Standard Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS)
- WK8279 - New Terminology for Standard Terminology Relating to Vascular Stents
- WK82815 - New Practice for Practice for Determining Annual Rainfall Weighting Factors for Use in Sizing Stormwater Control Measures
- WK82817 - New Guide for the Specification, Selection, Design, and Maintenance of Fencing for Outdoor Recreational Activities Areas, Playspaces and Playing Fields used in a Publicly Accessible Site
- WK82821 - New Specification for Uranium Hexafluoride Enriched between 5 and 8% 235U
- WK82826 - Revision of C1222-21 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- WK82839 - Revision of F3239-22 Standard Specification for Aircraft Electric Propulsion Systems
- WK82850 - Revision of F2685-14(2022) Standard Guide for Training of a Land Search Team Leader (STL)
- WK82863 - Revision of E3332-22 Standard Test Method for Determining Trash and/or Debris Capture Performance of Stormwater Control Measures
- WK82864 - Revision of D5982-15 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
- WK82881 - Revision of F2730/F2730M-18a Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
- WK82882 - New Practice for Surface Wettability of Bearings
- WK82889 - New Practice for Additive Manufacturing -- Powder bed fusion -- Build continuation after process interruption
- WK82912 - Revision of C1921/C1921M-21 Standard Test Method for Comparative Impact Testing of Gypsum Panel Outside 90° Corner Systems
- WK82915 - New Test Method for determination of Platinum in Non Zeolitic gamma Alumina based Fresh or Used Petrochemical catalyst
- WK82924 - New Guide for Testing Performance Claims of Apparel
- WK82931 - New Specification for Manufacturing Design of a Non-Adjustable Pipe Deflection Go No-Go Test Mandrel
- WK82934 - Revision of C534/C534M-20a Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- WK82964 - New Test Method for Screw Penetration in Gypsum Panel Assemblies
- WK82967 - Revision of F2252/F2252M-13(2018) Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
- WK82971 - Revision of E3199-22 Standard Guide for Alternative Allocation Approaches to Modeling Input and Output Flows of Secondary Materials and Related Recycling Scenarios in Life Cycle Assessment
- WK83016 - Revision of C858-19 Standard Specification for Underground Precast Concrete Utility Structures
- WK83044 - Revision of D2196-20 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer
- WK83055 - Revision of E839-11(2016)e1 Standard Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Cable
- WK83070 - Revision of E1820-21 Standard Test Method for Measurement of Fracture Toughness
- WK83108 - Reinstatement of D5311/D5311M-13 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
- WK83109 - New Guide for Additive manufacturing -- Design -- Vat Photopolymerization
- WK83110 - New Guide for Additive Manufacturing -- Powder bed fusion -- Measurement for load-bearing area for mechanical testing with as-built surfaces
- WK83115 - New Test Method for Calculating an Airborne Fiber Concentration from Automated Counting of Fibers in Prepared Air Sample Filters using Phase Contrast Microscopy
- WK83144 - Revision of C1775-22 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications
- WK83145 - New Practice for Additive Manufacturing -- Feedstock Materials -- Assessing the effect of moisture
- WK83164 - New Test Method for Analysis of Lipid Nanoparticle Formulations Using Multi-Detector Asymmetrical-Flow Field-Flow Fractionation
- WK83169 - Revision of C374-14(2018) Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)
- WK83206 - Revision of A941-22a Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK83207 - New Guide for Category Appraisals
- WK83220 - Revision of E2832-12(2017) Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
- WK83235 - Revision of F2033-20 Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
- WK83248 - Revision of D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples
- WK83249 - Revision of D5287-08(2015) Standard Practice for Automatic Sampling of Gaseous Fuels
- WK83250 - Revision of E1835-14(2022) Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry
- WK83256 - Revision of D7869-17 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
- WK83257 - Revision of D1014-18 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
- WK83297 - Revision of D4922-21 Standard Test Method for Determination of Radioactive Iron in Water
- WK83301 - Revision of F2291-22a Standard Practice for Design of Amusement Rides and Devices
- WK83342 - Reinstatement of D1429-13 Standard Test Methods for Specific Gravity of Water and Brine (Withdrawn 2022)
- WK83357 - Revision of D1121-11(2020) Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
- WK83373 - Revision of F412-21 Standard Terminology Relating to Plastic Piping Systems
- WK83379 - New Test Method for Durability Test Method for Vacuum Insulating Glass Unit
- WK83380 - Revision of D7430/D7430M-21 Standard Practice for Mechanical Sampling of Coal
- WK83382 - Revision of G134-17 Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet
- WK83388 - Revision of E2935-21 Standard Practice for Evaluating Equivalence of Two Testing Processes
- WK83399 - Revision of D4683-20 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150?°C
- WK83402 - Revision of G76-18 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
- WK83406 - Revision of D665-19 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
- WK83412 - New Specification for Design of Hybrid-Electric Powerplants for General Aviation Aircraft
- WK83432 - New Practice for Use of apparatus for the determination of early age and hardened length change of cement paste or mortar.
- WK83445 - New Practice for Standard Practice for Determining Load Resistance of Vacuum Insulating Glass in Buildings
- WK83449 - Revision of C1433M-20 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
- WK83456 - Revision of E2718-21 Standard Guide for Financial Disclosures Attributed to Climate Change
- WK83480 - New Test Method for Testing Towable Handles
- WK83491 - Revision of D2807-17a Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
- WK83509 - New Test Method for Exoskeleton Use: Crawling
- WK83512 - Revision of ISO/ASTM52910-18 Additive manufacturing — Design — Requirements, guidelines and recommendations
- WK83515 - New Specification for Additive manufacturing — Non-destructive testing and evaluation — Defect classification in metallic PBF parts
- WK83525 - New Practice for Equivalence testing for comparing test results
- WK83526 - Revision of G28-02(2015) Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
- WK83532 - Revision of E1225-20 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
- WK83533 - Revision of E1530-19 Standard Test Method for Evaluating the Resistance to Thermal Transmission by the Guarded Heat Flow Meter Technique
- WK83535 - Revision of F3066/F3066M-18 Standard Specification for Aircraft Powerplant Installation Hazard Mitigation
- WK83536 - Revision of F3239-22a Standard Specification for Aircraft Electric Propulsion Systems
- WK83561 - New Test Method for Corrosion of Aluminum Alloys in Fuel Cell or Battery Electric Vehicle Coolant Under Heat-Rejecting Conditions
- WK83570 - Revision of D8-22a Standard Terminology Relating to Materials for Roads and Pavements
- WK83601 - New Practice for Specimen Reconstitution Methods for Geotechnical Laboratory Testing of Soils
- WK83603 - New Guide for Principles for Circular Product Design
- WK83607 - Revision of C1397-13(2019) Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
- WK83608 - Revision of D6014-00(2015) Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
- WK83628 - Revision of D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers
- WK83629 - Revision of F970-17 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
- WK83631 - New Test Methods for Moisture Penetration Index
- WK83645 - New Practice for Structural Design of Thermoplastic Modular Crate Systems for Stormwater Collection
- WK83649 - Revision of E2649-20 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
- WK83666 - Revision of D1599-18 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
- WK83672 - Revision of F477-14(2021) Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
- WK83674 - Revision of E816-15 Standard Test Method for Calibration of Pyrheliometers by Comparison to Reference Pyrheliometers
- WK83675 - Revision of G167-15 Standard Test Method for Calibration of a Pyranometer Using a Pyrheliometer
- WK83676 - Revision of G183-15 Standard Practice for Field Use of Pyranometers, Pyrheliometers and UV Radiometers
- WK83678 - New Specification for Lamp, Torch and Candle Devices
- WK83694 - New Guide for Laboratory Photography
- WK83695 - New Guide for Post Mortem Examination Photography
- WK83701 - New Test Method for Analysis of Amphibole and Serpentine Minerals in Talc and Other Bulk Mineral Powders by Transmission Electron Microscopy (TEM)
- WK83703 - New Practice for Determining the Antimicrobial Activity of Wound Dressings
- WK83708 - Revision of E477-20 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
- WK83709 - Revision of C856/C856M-20 Standard Practice for Petrographic Examination of Hardened Concrete
- WK83710 - Revision of C856/C856M-20 Standard Practice for Petrographic Examination of Hardened Concrete
- WK83721 - Revision of D2549-02(2017) Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography
- WK83722 - Revision of C927-80(2019)e1 Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
- WK83725 - Revision of E3338-22 Standard Guide for Size and Shape of Solid Particles, Liquid Droplets, and Gas Bubbles, Dynamically Conveyed, Using a Dynamic Imaging Analyzer
- WK83732 - New Specification for Specification for Data Format for Biodetection Instruments for Biosecurity Applications
- WK83744 - Revision of E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- WK83754 - New Guide for Guide for Change Control in the Cannabis Industry
- WK83762 - Revision of A774/A774M-14(2019) Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
- WK83773 - Revision of D5853-17a Standard Test Method for Pour Point of Crude Oils
- WK83785 - Revision of D1655-22 Standard Specification for Aviation Turbine Fuels
- WK83807 - New Test Method for Standard Test Method for Determining Capacity of Pultruded Fiber Reinforced Polymer (FRP) Beam Shear Connections
- WK83811 - New Test Method for Analysis of Asbestos in Vermiculite - Research Method
- WK83812 - New Specification for Composite Mesh Reinforcement used for Concrete Cracking & Peel-and-Prop Prevention
- WK83813 - Revision of B391-18 Standard Specification for Niobium and Niobium Alloy Ingots
- WK83814 - New Test Method for Measuring Opacity of fugitive emissions containing particulate and other pollutants.
- WK83815 - New Test Method for Evaluating the Forced Entry Resistance of Folding Door Assemblies, Excluding Glazing Impact
- WK83817 - Revision of F588-17 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
- WK83818 - Revision of F842-17 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
- WK83821 - New Test Method for Test method for Lateral water migration resistance of blindside waterproofing
- WK83828 - Revision of D951-17 Standard Test Method for Water Resistance of Shipping Containers by Spray Method
- WK83850 - Revision of C1058/C1058M-10(2015) Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
- WK83855 - Revision of E139-11(2018) Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
- WK83858 - New Practice for Measuring Mobile Manipulator Performance: Non-continuous Tasks
- WK83861 - Revision of E2568-17a Standard Specification for PB Exterior Insulation and Finish Systems
- WK83863 - New Test Method for Grasp-Type Robot End-Effectors: Grasp Strength Performance
- WK83864 - Revision of F2781-15(2021) Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
- WK83865 - Revision of D6670-18 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
- WK83883 - Revision of D2513-20 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- WK83895 - Revision of E2966-14(2019) Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet
- WK83910 - Revision of D7566-22 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK83940 - Revision of D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
- WK83951 - Revision of E1731-11(2018) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
- WK83978 - New Guide for Selecting Analytical Methods to Evaluate PFAS in Consumer and Related Products
- WK83979 - New Guide for Corrosion Fatigue Evaluation of Absorbable Metals
- WK84054 - New Guide for Heart Valve TEMPs
- WK84055 - Revision of C1260-21 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
- WK84066 - Revision of E681-09(2015) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
- WK84067 - New Test Method for Determining Total Outward Leakage for Barrier Face Coverings
- WK84068 - Revision of F3537-21 Standard Guide for Respirator Fit Testing Methods
- WK84069 - Revision of E2021-15 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
- WK84070 - New Specification for General Public Respirator
- WK84078 - New Guide for Determination of Maximum Capacity of Packagings Subjected to the United Nations Performance Tests
- WK84081 - New Test Method for ILS for Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Wavelength Dispersive or Energy Dispersive X-Ray Fluorescence Spectrometry1
- WK84082 - Revision of D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
- WK84085 - Revision of D1238-20 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- WK84088 - Revision of F1055-16a Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
- WK84094 - Revision of C1153-10(2015) Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
- WK84095 - Revision of D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
- WK84097 - Revision of F2291-22a Standard Practice for Design of Amusement Rides and Devices
- WK84099 - New Practice for Pole Vault Boxes
- WK84104 - New Test Method for Determining the Particle and Inclusion size, and count in Nitinol products
- WK84108 - New Guide for ELECTROCHEMICAL MEASUREMENT OF CORROSION RATE IN LARGE CONCRETE ELEMENTS AND FIELD APPLICATIONS
- WK84113 - Revision of E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- WK84139 - Reinstatement of A65-07(2013) Standard Specification for Steel Track Spikes (Withdrawn 2022)
- WK84152 - Revision of F770-22 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- WK84156 - New Test Method for Indentation Plastometry of Metallic Materials
- WK84158 - New Test Method for Finite Flash Point determination of Liquid Wastes by Modified Continuously Closed Cup (MCCCFP) Tester
- WK84159 - Revision of D3338/D3338M-20a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
- WK84162 - Revision of E1549/E1549M-13(2022) Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
- WK84163 - Revision of F303-08(2016) Standard Practices for Sampling for Particles in Aerospace Fluids and Components
- WK84164 - Revision of F312-08(2016) Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
- WK84165 - Revision of E1560-18 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
- WK84170 - Revision of F2971-13(2021) Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing
- WK84181 - New Test Method for Cumulative Population Doubling Analysis of the Proliferation of Vertebrate Tissue Cell Preparations
- WK84190 - New Test Method for Determination of THC Isomers in Hempseed Products Intended for Animal Feed and Ingredients by Gas Chromatography and Flame Ionization Detection
- WK84201 - New Guide for Assessment of Exoskeleton Users' Attentional Performance
- WK84206 - Revision of D2013/D2013M-21 Standard Practice for Preparing Coal Samples for Analysis
- WK84216 - Revision of E8/E8M-22 Standard Test Methods for Tension Testing of Metallic Materials
- WK84225 - New Guide for Document Control
- WK84237 - Revision of E1225-20 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
- WK84239 - Revision of E2139-05(2018) Standard Test Method for Same-Different Test
- WK84241 - Revision of D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
- WK84252 - Revision of E4-21 Standard Practices for Force Calibration and Verification of Testing Machines
- WK84258 - New Test Method for Exoskeleton Use: Inclined Planes
- WK84262 - New Test Method for Exoskeleton Use: Ladders
- WK84265 - Revision of C535-16 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- WK84268 - New Guide for Characterization of Inorganic Residual Materials and Alternative Aggregates for Use as Structural Fill and Base Course
- WK84273 - New Practice for Design, Production, and Deployment of Genetically Engineered Microorganisms
- WK84285 - Revision of F905-04(2022) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
- WK84288 - Revision of E492-22 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
- WK84296 - Revision of F2291-22a Standard Practice for Design of Amusement Rides and Devices
- WK84313 - New Practice for Human Factors in Commercial Spaceflight
- WK84315 - New Test Method for Standard Test Method for Assessing Combustibility of Materials Using a Furnace at 750 C
- WK84317 - Revision of D2899-12(2017) Standard Practice for Establishing Allowable Stresses for Round Timber Piles
- WK84323 - Revision of F1506-22 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK84324 - Revision of F1506-22 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK84336 - New Terminology for Standard Terminology Of Tiny Houses
- WK84349 - Revision of F1885-18 Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
- WK84353 - Revision of E132-17 Standard Test Method for Poisson’s Ratio at Room Temperature
- WK84355 - New Guide for Additive Manufacturing -- Design -- Parts using ceramic materials
- WK84360 - Revision of D2872-22 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)
- WK84362 - Revision of G113-22 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
- WK84363 - Revision of G113-22 Standard Terminology Relating to Natural and Artificial Weathering Tests of Nonmetallic Materials
- WK84369 - Revision of E2358-17 Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
- WK84371 - Revision of E1732-22 Standard Terminology Relating to Forensic Science
- WK84393 - Revision of C856/C856M-20 Standard Practice for Petrographic Examination of Hardened Concrete
- WK84415 - New Practice for - Additive Construction – General Principles – Standard Practice for the Evaluation of Structural Printed Elements
- WK84416 - Revision of R0030 Manual of Aggregate and Concrete Testing (This is not an ASTM standard; available as PDF, only)
- WK84418 - Revision of D6556-21 Standard Test Method for Carbon Black—Total and External Surface Area by Nitrogen Adsorption
- WK84419 - Revision of F3356-19a Standard Practice for Conformity Assessment of Metal Detectors Used in Safety and Security
- WK84420 - New Guide for Cleaning of Cured In Place Pipe (CIPP) and Liners
- WK84423 - New Test Method for Determining Resistance of Asphalt Shingles to Hail by Impact with Propelled Ice Balls
- WK84430 - Revision of E23-18 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- WK84431 - Revision of G40-22a Standard Terminology Relating to Wear and Erosion
- WK84432 - Revision of D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- WK84441 - Revision of D7892-22 Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
- WK84445 - Revision of D7892-22 Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry
- WK84449 - Revision of D2029-97(2017) Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point
- WK84450 - Revision of D2129-17 Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)
- WK84452 - Revision of D6433-20 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
- WK84461 - Revision of E176-21ae1 Standard Terminology of Fire Standards
- WK84464 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK84488 - Revision of C94/C94M-22a Standard Specification for Ready-Mixed Concrete
- WK84505 - Revision of E2340/E2340M-11(2021) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
- WK84517 - Revision of D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK84523 - New Test Method for Assessment of Total Suspended Solids Removal, Operating Driving Head, and Scour of Stormwater Filtration Devices
- WK84525 - Revision of F1264-16e1 Standard Specification and Test Methods for Intramedullary Fixation Devices
- WK84530 - New Guide for Risk Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories
- WK84534 - Revision of E8/E8M-22 Standard Test Methods for Tension Testing of Metallic Materials
- WK84537 - New Specification for Additive Manufacturing -- Finished Part Properties -- Titanium-27Niobium-21Zirconium via Laser Beam Powder Bed Fusion for Medical Implant Applications
- WK84554 - Revision of E3085-17 Standard Guide for Fourier Transform Infrared Spectroscopy in Forensic Tape Examinations
- WK84560 - Revision of E512-94(2020) Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
- WK84577 - Revision of C305-20 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
- WK84584 - Revision of F1148-22 Standard Consumer Safety Performance Specification for Home Playground Equipment
- WK84589 - New Specification for Metrics for Determining Intoxicating and Non-Intoxicating Cannabinoids
- WK84597 - Revision of B333-03(2018) Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip
- WK84598 - Revision of B335-03(2018) Standard Specification for Nickel-Molybdenum Alloy Rod
- WK84599 - Revision of B462-18e1 Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
- WK84601 - Revision of B582-07(2018) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip
- WK84602 - Revision of B639-02(2018) Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS?R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
- WK84604 - Revision of B818-03(2018) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy(UNS R31233) Plate, Sheet and Strip
- WK84606 - Revision of D7338-14 Standard Guide for Assessment Of Fungal Growth in Buildings
- WK84614 - New Test Method for firmness of infant products
- WK84615 - New Test Methods for measurement of re-breathing in infant bedding materials
- WK84622 - New Practice for Preparing Life Cycle Assessments for Recovered Carbon Black Products (Interim Product Category Rules)
- WK84623 - New Test Methods for Proximate Analysis of Biomass Materials by Macro Thermogravimetric Analysis
- WK84630 - Revision of E3318-22 Standard Terminology for Standards Relating to Stormwater Control Measures
- WK84642 - Revision of C1383-15(2022) Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
- WK84645 - Revision of D4451-22 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing
- WK84650 - Revision of E2758-22 Standard Guide for Selection and Use of Infrared Thermometers
- WK84659 - Revision of D4354-12(2020) Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products (RECPs) for Testing
- WK84660 - Revision of D4632/D4632M-15a Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
- WK84662 - Revision of D4533/D4533M-15 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
- WK84667 - New Guide for Working With Dust of Ground Cannabis sativa L. plant Parts and Crystallized Cannabinoids
- WK84668 - New Test Method for Evaluating the Performance of Gutter Cover Devices
- WK84702 - Revision of F1021-18 Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
- WK84718 - New Specification for Standard Specification for Wrought Nickel-Titanium Shape Memory Alloy Plate, Sheet and Foil for Medical Devices and Surgical Implants
- WK84721 - Revision of E631-15 Standard Terminology of Building Constructions
- WK84724 - Revision of D4814-22 Standard Specification for Automotive Spark-Ignition Engine Fuel
- WK84725 - Revision of D4910/D4910M-19 Standard Tables of Body Measurements for Children, Infant Sizes – Preemie to 24 Months
- WK84729 - New Specification for Engine Coolants with Limited to No Freeze Protection for Liquid Cooled Engine Service
- WK84754 - Withdrawal of D891-18 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
- WK84761 - Reinstatement of D2460-07(2013) Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water (Withdrawn 2022)
- WK84776 - Revision of C904-01(2018) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
- WK84783 - Revision of D4814-22 Standard Specification for Automotive Spark-Ignition Engine Fuel
- WK84785 - Revision of D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- WK84786 - Revision of D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- WK84789 - New Classification for Standard Volumetric Reference Radiographs for Aluminum and Magnesium Casting.
- WK84790 - Revision of D2386-19 Standard Test Method for Freezing Point of Aviation Fuels
- WK84794 - Revision of D660-93(2019) Standard Test Method for Evaluating Degree of Checking of Exterior Paints
- WK84798 - Revision of C877-21 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
- WK84807 - New Guide for New spatial and color appearance attributes of gonioapparent materials
- WK84808 - Revision of E709-21 Standard Guide for Magnetic Particle Testing
- WK84809 - Revision of E2933-21 Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications
- WK84810 - Revision of C1861-22 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
- WK84811 - New Test Method for Measuring Impact Resistance of Materials Used in Protective Clothing
- WK84813 - Revision of D3154-14 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
- WK84814 - Revision of F778-88(2014) Standard Methods for Gas Flow Resistance Testing of Filtration Media
- WK84831 - New Classification for Recovered Carbon Black Classification
- WK84835 - New Guide for Standard Guide for Monitoring Digital Detector Array (DDA) Aging
- WK84836 - New Practice for Standard Practice for Visual Determination of Computed Tomographic (CT) Image Quality
- WK84838 - New Specification for Robotic Educational Standard
- WK84844 - Revision of F141-12(2020) Standard Terminology Relating to Resilient Floor Coverings
- WK84868 - New Guide for Standard Guide for Rabbit Knee Condyle Drill Hole CSD Model
- WK84882 - New Guide for Standard Guide for Testimony for Forensic Science Practitioners
- WK84886 - New Guide for Concrete Stormwater Management Systems
- WK84897 - Revision of F1137/F1137M-19 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
- WK84901 - New Test Method for Particulate and Coating Integrity Characterization of Coated Vascular Stents and Coated Endovascular Prostheses Subjected to Chronic Cyclic Loading
- WK84902 - New Test Methods for Effect of Rapid Freezing and Thawing on Mechanical Properties of Natural Stone
- WK84926 - Revision of E473-22d Standard Terminology Relating to Thermal Analysis and Rheology
- WK84931 - Revision of F2440-18 Standard Specification for Indoor Wall/Feature Padding
- WK84944 - New Specification for Body Measurements Adult Hand Standards
- WK84955 - Revision of A564/A564M-19a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- WK84963 - Revision of C128-22 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate
- WK84977 - New Guide for Controlling Quality of Computed Tomography Dimensional Measurements by Using Representative Quality Indicators (RQIs)
- WK84993 - New Test Method for Calibration of Germanium Detectors for Reactor Dosimetry
- WK84997 - Revision of D7319-22 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography
- WK85000 - Revision of D5093-15e1 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
- WK85003 - Revision of E3346-22 Standard Guide for Combustion, Inert Gas Fusion and Hot Extraction Instruments for use in Analyzing Metals, Ores, and Related Materials
- WK85019 - Revision of E284-22 Standard Terminology of Appearance
- WK85034 - Revision of D5403-93(2021) Standard Test Methods for Volatile Content of Radiation Curable Materials
- WK85066 - Revision of F1058-16 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire, Strip, and Strip Bar for Surgical Implant Applications (UNS R30003 and UNS R30008)
- WK85096 - Revision of D6387-19 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography
- WK85104 - New Practice for Supporting Compliance with Requirements for sUAS Operations over People
- WK85106 - Revision of E1503-22 Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System
- WK85108 - Revision of F2825-18 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
- WK85111 - Revision of E648-19ae1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
- WK85114 - Revision of F3230-21a Standard Practice for Safety Assessment of Systems and Equipment in Small Aircraft
- WK85120 - New Test Method for Additive Manufacturing -- Measurement of grain size distribution in additively manufacture materials
- WK85121 - New Practice for Additive Manufacturing -- Nondestructive Examination of Polymeric and Nonmetallic Additively Manufactured Parts After Build
- WK85126 - New Guide for Measurement of Ground-Bone and Structure-Borne Vibraation
- WK85129 - New Test Method for Determination of Total Chlorine in Coal by XRF
- WK85130 - New Specification for Liquid Applied SEBS Thermoplastic Rubber Coating Used in Roofing
- WK85153 - New Specification for Vertiport Automation Supplemental Data Service Provider (SDSP) Performance
- WK85160 - Reinstatement of D4424-09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography (Withdrawn 2023)
- WK85165 - Revision of E2869-17 Standard Digital Reference Images for Magnesium Castings
- WK85167 - Revision of C465-22 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
- WK85174 - Revision of E119-22 Standard Test Methods for Fire Tests of Building Construction and Materials
- WK85175 - New Practice for Operations and Safety of Wake Parks with Linear Systems
- WK85180 - Revision of E284-22 Standard Terminology of Appearance
- WK85183 - Revision of F3180/F3180M-21 Standard Specification for Low-Speed Flight Characteristics of Aircraft
- WK85189 - Revision of F3193-16 Standard Guide for Training of a Land Search and Rescue Team Leader
- WK85215 - Revision of D4175-22a Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
- WK85220 - Revision of A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete
- WK85221 - Revision of A394-08(2015) Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
- WK85222 - Revision of D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)
- WK85223 - New Guide for Odor Evaluation of Absorbent Hygiene Articles
- WK85227 - Revision of F2746-14(2023) Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane
- WK85240 - Revision of D117-22 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
- WK85241 - New Practice for Pilot Compartment View in Precipitation
- WK85248 - Revision of D7181-20 Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
- WK85249 - Revision of E291-18 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
- WK85259 - New Guide for Nature-based Solutions for Inland Flood Mitigation
- WK85263 - New Test Method for 1H NMR Analysis of Biodiesel B100, Biodiesel-ULSD Blends, Biodiesel Process Feeds, and, in Process Samples
- WK85278 - Revision of D5185-18 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- WK85279 - Revision of D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
- WK85281 - New Test Method for Determination of Derivatized Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry
- WK85286 - Revision of D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics
- WK85293 - Revision of E2273-18 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
- WK85294 - Reinstatement of D4428/D4428M-14 Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023)
- WK85332 - Revision of D8397-22 Standard Specification for Acrylic and Reactive Adhesives for Installation of Vinyl and Rubber Floor Coverings
- WK85335 - Revision of D5055-19e1 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
- WK85345 - Revision of E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
- WK85351 - Revision of E595-15(2021) Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
- WK85362 - Revision of D6079-22 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
- WK85363 - Revision of E3324-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using Ultra-High-Performance Liquid Chromatography (UHPLC) with Triple Quadrupole Mass Spectrometry (TQMS)
- WK85364 - Revision of E3297-21 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with a Charged Aerosol Detector (CAD)
- WK85365 - Revision of E3323-22 Standard Test Method for Lipid Quantitation in Liposomal Formulations Using High Performance Liquid Chromatography (HPLC) with an Evaporative Light-Scattering Detector (ELSD)
- WK85367 - New Test Method for Identification of Compounds Related to Organic Gunshot Residue (OGSR) by Liquid Chromatography-Mass Spectrometry (LC-MS)
- WK85368 - New Test Method for Identification of Compounds Related to Organic Gunshot Residue (OGSR) by Gas Chromatography-Mass Spectrometry (GC-MS)
- WK85371 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK85372 - Revision of D7208-23 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
- WK85380 - Revision of F1869-22 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
- WK85382 - Revision of D2513-20 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- WK85409 - Revision of D8493-23 Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis
- WK85411 - Revision of C859-22a Standard Terminology Relating to Nuclear Materials
- WK85414 - Revision of F3548-21 Standard Specification for UAS Traffic Management (UTM) UAS Service Supplier (USS) Interoperability
- WK85415 - New Specification for UAM PSU Interoperability
- WK85416 - Revision of E90-09(2016) Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- WK85429 - New Test Method for The Determination of Rheological Properties of Lubricating Greases
- WK85430 - Revision of F2683-11(2017) Standard Guide for Selection of Booms for Oil-Spill Response
- WK85435 - Reinstatement of D5434-12 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock (Withdrawn 2021)
- WK85438 - Revision of E336-23 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
- WK85444 - New Test Method for Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
- WK85467 - Revision of D7591-12(2017) Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography
- WK85469 - Revision of B521-22 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes
- WK85470 - Revision of B708-12(2019) Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip
- WK85474 - New Specification for Specification for Aviation Hydrogen Fuels
- WK85485 - Revision of F1869-22 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
- WK85486 - Revision of E228-22 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
- WK85500 - Revision of D5397-20 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- WK85502 - Revision of D3531/D3531M-16 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
- WK85503 - New Test Method for Determination of Strain Hardening Modulus of HDPE Geomembranes
- WK85513 - New Test Method for Predicting Coefficient of Friction and Wear Properties of Lubricating Fluids using a Falex MCTT Vane Pump Apparatus
- WK85524 - Revision of F3263-17 Standard Guide for Packaging Test Method Validation
- WK85525 - Revision of D1894-14 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
- WK85527 - New Guide for Determination of Corrosion Rate with Electrochemical Harmonic Measurement and Analysis
- WK85537 - Revision of E119-22 Standard Test Methods for Fire Tests of Building Construction and Materials
- WK85548 - Revision of C127-15 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate
- WK85549 - Revision of C1576-05(2017) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
- WK85572 - Revision of D5126-16e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
- WK85577 - New Specification for Dog toy Safety
- WK85579 - Revision of E2947-21a Standard Guide for Building Enclosure Commissioning
- WK85598 - Revision of C1793-15 Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
- WK85607 - Revision of E3102-18 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application
- WK85609 - Revision of D3265-23 Standard Test Method for Carbon Black—Tint Strength
- WK85610 - Revision of C1783-15 Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
- WK85620 - New Terminology for Diversity, Equity, and Inclusion
- WK85622 - Revision of C1202-22e1 Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration
- WK85623 - Revision of F2028-17 Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
- WK85625 - Revision of D2835-89(2017) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
- WK85631 - Reinstatement of D2758-94(2009) Standard Test Method for Engine Coolants by Engine Dynamometer (Withdrawn 2022)
- WK85641 - New Specification for Additive Manufacturing—Data – Data Packages for AM Parts
- WK85658 - Revision of C125-21a Standard Terminology Relating to Concrete and Concrete Aggregates
- WK85660 - New Specification for Attachments to Metal Roof Systems
- WK85661 - New Test Method for Additive Manufacturing -- procedure and coupon geometry -- distortion and residual stresses assessment of Additively Manufactured parts
- WK85663 - Revision of D8237-21 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
- WK85664 - New Guide for the selection and application of SIPP non-structural linings in nuclear plant water systems
- WK85668 - Revision of D4612-16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil
- WK85669 - New Guide for Allergen Control for Cannabis/Hemp Manufacturing
- WK85670 - New Specification for Polyamide 66 (PA66) Gas Pressure Pipe, Tubing, and Fittings1
- WK85672 - New Practice for Heat Butt-Fusion Joining of Very Thick Wall (>2-inches) Bi-modal High Density Polyethylene Pipe and Fittings for Industrial and Municipal Applications.
- WK85677 - Revision of F2613-22 Standard Consumer Safety Specification for Children's Chairs and Stools
- WK85690 - Reinstatement of D7949-14 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations (Withdrawn 2023)
- WK85699 - Revision of D3154-14(2023) Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)
- WK85701 - New Specification for Additive Manufacturing -- Finished part properties -- Stainless Steel Alloys made by powder bed fusion
- WK85713 - Revision of F3239-22a Standard Specification for Aircraft Electric Propulsion Systems
- WK85719 - New Guide for Determination of Detection Limits in Air Quality Methods
- WK85721 - New Specification for Tiny House Foundations
- WK85722 - New Guide for Building a Working Tiny House Community
- WK85726 - Withdrawal of G41-90(2018) Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
- WK85748 - New Specification for Additive manufacturing -- Qualification principles -- Optical properties of fixed resolution UV engine
- WK85750 - Revision of F1148-22 Standard Consumer Safety Performance Specification for Home Playground Equipment
- WK85761 - New Test Method for Determination of Total Hydrocarbons in Compressed Air or Nitrogen
- WK85762 - Revision of E1129/E1129M-19 Standard Specification for Thermocouple Connectors
- WK85763 - Revision of E1684/E1684M-19 Standard Specification for Miniature Thermocouple Connectors
- WK85764 - Revision of D8446-22 Standard Test Method for Water Vapor Content in Compressed Air Using Electronic Moisture Analyzers
- WK85784 - Revision of F2440-18 Standard Specification for Indoor Wall/Feature Padding
- WK85786 - Reinstatement of D7018/D7018M-12 Standard Terminology Relating to Glass Fiber and Its Products (Withdrawn 2021)
- WK85787 - Revision of D7549-21 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure
- WK85788 - Revision of F3442/F3442M-23 Standard Specification for Detect and Avoid System Performance Requirements
- WK85802 - New Guide for Performing Failure Modes and Effects Analysis on Cleaning Processes
- WK85808 - Revision of D999-08(2015) Standard Test Methods for Vibration Testing of Shipping Containers
- WK85809 - Revision of A839-15 Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications
- WK85810 - Reinstatement of D6282/D6282M-14 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations (Withdrawn 2023)
- WK85822 - New Test Method for Determining Industrial Compost Disintegration of Materials and Products in the Field
- WK85823 - New Guide for Development, Verification, Validation, and Documentation of Explosive and Contraband Simulants for Security Screening Systems
- WK85830 - Revision of B49-20 Standard Specification for Copper Rod for Electrical Purposes
- WK85832 - Revision of F2959-22 Standard Practice for Aerial Adventure Courses
- WK85836 - New Test Method for Evaluating Aerial Response Robot Capabilities: Maneuvering: Fly Through Confined Spaces
- WK85837 - New Test Method for Evaluating Ground and Aerial Response Robot Capabilities: Map Indoor Environments
- WK85838 - New Test Method for Evaluating Aerial Response Robot Capabilities: Takeoff and Land
- WK85842 - New Test Method for Determination of Selected Pesticides and Herbicides in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
- WK85851 - Revision of E1573-22 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels
- WK85852 - New Practice for Implementing a Cannabis Seed to Sale Track and Trace Program
- WK85861 - New Guide for Guide to Techniques for Lowering Microbial Load in Cannabis Raw Materials
- WK85863 - New Specification for Tiny Houses on Wheels
- WK85868 - New Specification for Specification for Polymer Modified Emulsified Asphalt
- WK85872 - New Practice for The order of operations for installation of sewer system clean-outs, lining of sewer mains and laterals, and containing and filtering emissions resulting from the curing of the resin-impregnated liners
- WK85873 - New Guide for Standard Guide for Laboratory Certificates of Analysis (COA) in the Cannabis/Hemp Industry
- WK85874 - New Guide for Cannabis/Hemp Laboratory Out-of-Specifications (OOS) and Retesting
- WK85875 - Revision of F2291-22a Standard Practice for Design of Amusement Rides and Devices
- WK85882 - New Guide for Sample Preparation of infused products(edibles) and oils/concentrates for laboratory analysis.
- WK85884 - New Specification for Developing Microgrid Standards to enable the Interconnection of Utilities to both Single Tiny Houses and Tiny Home Communities
- WK85886 - Revision of C356-22 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- WK85887 - Revision of C356-22 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
- WK85888 - New Test Method for Determination of the State of Cure of a latex medical glove.
- WK85889 - New Specification for Medical Gloves made from a blend of materials.
- WK85891 - Revision of C148-17(2022) Standard Test Methods for Polariscopic Examination of Glass Containers
- WK85899 - New Test Method for Determining Fire Propagation of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
- WK85900 - Revision of F963-17 Standard Consumer Safety Specification for Toy Safety
- WK85926 - New Test Method for Women’s Lacrosse Stick Pocket Performance
- WK85927 - New Test Method for Asphalt Fractionation by Thin Layer Chromatography-Flame Ionization Detector
- WK85928 - New Guide for Fugitive Methane Emissions Measurement Process
- WK85932 - Revision of E521-16 Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
- WK85933 - Revision of E942-16 Standard Guide for Investigating the Effects of Helium in Irradiated Metals
- WK85934 - New Test Method for Test Method for Thermal Effusivity by the Transient Plane Source Method
- WK85939 - Revision of E3148-18(2023) Standard Guide for Postmortem Facial Image Capture
- WK85948 - Revision of D7756-19 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection
- WK85950 - Revision of B115-10(2021) Standard Specification for Electrolytic Copper Cathode
- WK8596 - Revision of C1202-97 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
- WK85963 - New Test Method for testing submit that was not working for a staff manager
- WK85965 - New Specification for Padded Athletic Undergarments
- WK85971 - New Practice for Biomass Supply Chain Risk
- WK85974 - Revision of B62-17 Standard Specification for Composition Bronze or Ounce Metal Castings
- WK85979 - Revision of D2099-14(2023) Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
- WK85981 - New Test Method for Determination of amphibole and serpentine group minerals in mineral powders using XRD
- WK85983 - Revision of C1497-16 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
- WK85991 - Revision of C167-22 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
- WK85992 - Revision of E3000-18 Standard Guide for Measuring and Tracking Performance of Assessors on a Descriptive Sensory Panel
- WK85993 - New Test Method for Standard Test Method for Measuring the Insulation and Contact Temperatures Change of an Instrumented Hand in Glove Assemblies worn on Extravehicular Activities
- WK85994 - New Guide for Evaluating Impact Abrasion Resistance of Textile Fabrics Used in Spacesuits and Spacesuit Gloves (Rotary Tumbler Method)
- WK85995 - New Test Method for Measuring Cut Resistance of Materials Used in Spacesuits and Spacesuit Gloves Under Cryogenic Conditions with Tomodynamometer Test Equipment
- WK86001 - New Classification for Standard Classification for Exoskeleton
- WK86007 - Revision of E2356-18 Standard Practice for Comprehensive Building Asbestos Surveys
- WK86008 - Revision of E2357-18 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
- WK86011 - Revision of D8456-22 Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
- WK86013 - New Guide for Equivalence
- WK86020 - Revision of F2620-20ae2 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
- WK86023 - Revision of F1674-18 Standard Test Method for Joint Restraint Products for Use with PVC Pipe
- WK86025 - Revision of D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)
- WK86026 - Revision of F711-17(2022) Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
- WK86027 - Revision of E3054/E3054M-23 Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes
- WK86030 - Revision of D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
- WK86049 - Revision of E1996-20 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
- WK86051 - Revision of C1138M-19 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
- WK86052 - Revision of C779/C779M-19 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
- WK86053 - Revision of C944/C944M-19 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
- WK86056 - New Test Method for Measuring In Vitro Drug Release from Liposomal Drug Formulations.
- WK86057 - New Test Method for New Standard Test Method for Measuring Sulfate and Ammonium Ion Concentrations in Liposome Drug Formulations
- WK86059 - New Test Method for The Gravimetric Reduction Preparation of Materials for Asbestos Analysis
- WK86060 - Revision of E1748-95(2017) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
- WK86063 - Revision of E1958-22 Standard Guide for Sensory Claim Substantiation
- WK86068 - Revision of D883-22 Standard Terminology Relating to Plastics
- WK86073 - Withdrawal of D1708-18 With Replacement D0882
- WK86076 - New Specification for Heat-Fusion Joined, Cohesively Bonded Fiber Reinforced Thermoplastic Pipe
- WK86079 - New Test Method for Insulating Glass Unit Performance Using Rapid Assessment Chamber
- WK86084 - Revision of E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- WK86088 - New Guide for Aseptic Training
- WK86092 - Revision of E161-17(2021) Standard Specification for Electroformed Material and Test Sieves
- WK86094 - Revision of E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
- WK86095 - Revision of E2651-19 Standard Guide for Powder Particle Size Analysis
- WK86098 - Revision of D5663-15(2020) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
- WK86099 - Revision of E139-11(2018) Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
- WK86100 - New Test Method for Monochloramine Rate Constant Determination
- WK86101 - New Test Method for Hydrogen Peroxide Rate Constant Determination
- WK86107 - Revision of F3218-19 Standard Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
- WK86116 - New Practice for Measuring Mobile Manipulator Performance: Recording the Workpiece Configuration
- WK86119 - New Practice for Classification, Design, Construction, and Operation of Lazy and Action River Attractions
- WK86120 - New Guide for Architectural and Structural Use of Glass
- WK86121 - Reinstatement of D1894-14 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting (Withdrawn 2023)
- WK86135 - Revision of D8270-23 Standard Terminology Relating to Cannabis
- WK86138 - Revision of F3064/F3064M-21 Standard Specification for Aircraft Powerplant Control, Operation, and Indication
- WK86141 - New Specification for Standard Specification for Polyphenylsulfone Resin for Medical Applications
- WK86159 - Revision of E3278-21 Standard Test Method for Bubble Point Pressure of Woven Wire Filter Cloth
- WK86160 - Revision of E2427-22 Standard Test Method for Acceptance by Performance Testing for Test Sieves
- WK86166 - Revision of D7647-10(2018) Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
- WK86180 - Reinstatement of D2583-13a Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor (Withdrawn 2022)
- WK86187 - Revision of C497-20e1 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
- WK86188 - New Guide for Risk Assessment of Cleaning Validation Programs
- WK86189 - New Practice for a Split Force Measurement Apparatus to Support Grasp-Type End-Effector Performance Tests
- WK86196 - Revision of D4553-18 Standard Test Method for Determining In Situ Creep Characteristics of Rock
- WK86209 - Revision of E620-18 Standard Practice for Reporting Opinions of Scientific or Technical Experts
- WK86210 - Revision of D5578-04(2015) Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)
- WK86212 - New Practice for Standard Practice for Ultrasonic Detection of Meso Inclusions in Steel
- WK86215 - Revision of D7339-18 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography
- WK86228 - Revision of D8042-18 Test Method for Shrinkage Temperature of Wet Blue and Wet White
- WK86230 - New Guide for Drone Assessments of Commercial Real Estate
- WK86241 - New Specification for Standard Specification for Uranium Oxides with a 235U Content of Greater Than 5 % and Less than 20 %
- WK86243 - Revision of D714-02(2017) Standard Test Method for Evaluating Degree of Blistering of Paints
- WK86258 - Revision of C1401-14(2022) Standard Guide for Structural Sealant Glazing
- WK86273 - New Guide for Interpretation and Reporting in Forensic Comparisons of Trace Materials
- WK86274 - New Guide for Risk Management and Risk Assessment in the Cannabis/Hemp Industries
- WK86321 - Revision of A426/A426M-18 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
- WK86322 - Revision of A560/A560M-12(2018) Standard Specification for Castings, Chromium-Nickel Alloy
- WK86333 - New Practice for Implementing Forcibly Unlocalized Conditions on A-UGV Test Methods
- WK86336 - Revision of A193/A193M-23 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- WK86337 - New Test Method for The analysis of copper alloys by Inductively Coupled Plasma Atomic Emission Spectroscopy
- WK86338 - Revision of A194/A194M-22a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
- WK86347 - Revision of E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
- WK86363 - New Test Method for Measuring the Gelation Propensity of Engine Oils After Treatment with Acidified Water
- WK86369 - Revision of E1820-23a Standard Test Method for Measurement of Fracture Toughness
- WK86370 - Revision of D6213-17 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
- WK86372 - Revision of D6388-18 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
- WK86379 - Revision of D7356/D7356M-19 Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device
- WK86387 - New Practice for Safe Operating Practices In-Space for Space Fission Reactors Used for Nuclear Power and Propulsion
- WK86401 - Revision of F1137/F1137M-19 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
- WK86402 - Revision of C1063-22a Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- WK86403 - Revision of C1861-23 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
- WK86404 - Revision of C1861-23 Standard Specification for Lathing and Furring Accessories, and Fasteners, for Interior and Exterior Portland Cement-Based Plaster
- WK86405 - Revision of A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing
- WK86413 - Revision of E1820-23a Standard Test Method for Measurement of Fracture Toughness
- WK86417 - Revision of A890/A890M-18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
- WK86435 - Revision of F2374-22 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
- WK86444 - Revision of E844-18 Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance
- WK86445 - Revision of E1854-19 Standard Practice for Ensuring Test Consistency in Neutron-Induced Displacement Damage of Electronic Parts
- WK86454 - Revision of E1018-20e1 Standard Guide for Application of ASTM Evaluated Cross Section Data File
- WK86458 - New Guide for Composite Damage Tolerance Evaluations
- WK86459 - New Practice for Metallic Damage Tolerance Evaluations
- WK86463 - Revision of F3062/F3062M-20 Standard Specification for Aircraft Powerplant Installation
- WK86469 - Revision of D4059-00(2018) Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography
- WK86470 - Revision of E2546-15 Standard Practice for Instrumented Indentation Testing
- WK86479 - Revision of B536-19 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys Plate, Sheet, and Strip
- WK86480 - Revision of B127-19 Standard Specification for Nickel-Copper Alloy Plate, Sheet, and Strip
- WK86482 - Revision of B161-05(2019) Standard Specification for Nickel Seamless Pipe and Tube
- WK86483 - Revision of B162-99(2019) Standard Specification for Nickel Plate, Sheet, and Strip
- WK86484 - Revision of B164-03(2019) Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
- WK86485 - Revision of B165-19 Standard Specification for Nickel-Copper Alloy Seamless Pipe and Tube
- WK86488 - Revision of B626-19 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube
- WK86493 - Revision of B872-19 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
- WK86504 - Revision of G2/G2M-19 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
- WK86505 - Revision of B386/B386M-19e1 Standard Specification for Molybdenum and Molybdenum Alloy Plate,Sheet, Strip, Foil, and Ribbon
- WK86510 - Revision of D2892-20 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
- WK86513 - Revision of D5236-18a Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
- WK86516 - Revision of F564-17 Standard Specification and Test Methods for Metallic Bone Staples
- WK86523 - Revision of F496-20 Standard Specification for In-Service Care of Insulating Gloves and Sleeves
- WK86527 - Revision of D5723-95(2019) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
- WK86529 - Revision of B29-19 Standard Specification for Refined Lead
- WK86534 - Revision of E4-21 Standard Practices for Force Calibration and Verification of Testing Machines
- WK86536 - Revision of F2213-17 Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
- WK86545 - Revision of E328-21 Standard Test Methods for Stress Relaxation for Materials and Structures
- WK86546 - New Guide for Stored Energy Device Design for Ethylene Oxide Sterilization
- WK86552 - New Guide for Best Practices for Remote Interpreting
- WK86560 - Revision of B695-21 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
- WK86561 - New Guide for Non-Animal Acute Toxicity Testing of Water-Dilutable Metalworking Fluids
- WK86562 - Revision of B842-23 Standard Specification for Electrodeposited Coatings of Zinc Iron Alloy Deposits
- WK86569 - New Specification for Self-Balancing Scooters
- WK86574 - New Guide for The Presentation of Fastener Conformance Documentation
- WK86591 - New Test Method for Pet Safety Harness Restraint Systems for Vehicle Occupant Safety
- WK86596 - Revision of E1459-13(2018) Standard Guide for Physical Evidence Labeling and Related Documentation
- WK86598 - Revision of E1492-11(2017) Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
- WK86599 - Revision of C1136-23 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
- WK86601 - Revision of D4303-10(2022) Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
- WK86606 - New Guide for Payment Processing Compliance in US Regulated Cannabis Industries
- WK86618 - Revision of F1446-20 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
- WK86632 - New Guide for medical device schematics to aid in cleaning
- WK86637 - Revision of C1709-22 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
- WK86649 - Revision of E3375-23 Standard Practice for Cone Beam Computed Tomographic (CT) Examination
- WK86650 - Revision of E1820-23a Standard Test Method for Measurement of Fracture Toughness
- WK86654 - Revision of D4469-17 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures
- WK86661 - Revision of E2579-23a Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
- WK86662 - Revision of D7012-14e1 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
- WK86668 - Revision of C94/C94M-22a Standard Specification for Ready-Mixed Concrete
- WK86676 - Revision of C494/C494M-19e1 Standard Specification for Chemical Admixtures for Concrete
- WK86678 - Revision of E705-18 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
- WK86682 - Revision of C31/C31M-22 Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK86689 - New Guide for Utilization of Quarry Fines
- WK86690 - New Specification for Children's Standing Towers
- WK86692 - New Practice for Assessment Method for Exoskeletons in Logistics: Box and Bag Handling
- WK86697 - Revision of D4527-18(2023) Standard Test Method for Carbon Black—Solvent Extractables
- WK86698 - New Test Method for Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys Using The Eddy Current Method
- WK86700 - Revision of E1426-14(2019)e1 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques
- WK86702 - Revision of E545-19 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination
- WK86704 - Revision of C1116/C1116M-10a(2015) Standard Specification for Fiber-Reinforced Concrete
- WK86705 - Revision of F406-22 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- WK86706 - Revision of D4678-15a(2019) Standard Practice for Rubber—Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials
- WK86720 - New Practice for Acoustic Emission of Gray Cast Iron Yankee Steam Heated Paper Dryers During Thermal Stresses Induced During Cool Down
- WK86721 - New Test Method for Requalification of Type IV Composite Pressure Vessels Using Modal Acoustic Emission (MAE)
- WK86722 - New Guide for Training Requirements for Herbal Extraction Related Professions Within the Cannabis and Hemp Industries
- WK86723 - New Guide for Air Quality Measurements in Response to Emergency Incidents
- WK86727 - Revision of C1232-21a Standard Terminology for Masonry
- WK8673 - Revision of E329-05 Standard Specification for Agencies Engaged in the Testing and/or Inspection of Materials Used in Construction
- WK86731 - Revision of F2787-13(2018) Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
- WK86740 - Revision of G151-19 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
- WK86761 - Revision of E165/E165M-18 Standard Practice for Liquid Penetrant Testing for General Industry
- WK86763 - Revision of E3030-19e1 Standard Digital Reference Images for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings
- WK86769 - Revision of A962/A962M-22 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- WK86775 - New Practice for Cannabis or Hemp Asset Lifecycle Management
- WK86776 - Revision of E1921-22a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
- WK86777 - Revision of C1029-20 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
- WK86788 - New Specification for Twisted Steel Micro Reinforcement for Concrete
- WK86796 - Revision of D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique
- WK86797 - Revision of E1928-13(2019) Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
- WK86798 - Revision of E837-20 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
- WK86810 - Revision of E534-18 Standard Test Methods for Chemical Analysis of Sodium Chloride
- WK86815 - New Guide for Toxicity testing with the mayfly, Neocloeon sp.
- WK86821 - Revision of F2143-16 Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables
- WK86832 - Reinstatement of E1020-13e1 Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation (Withdrawn 2022)
- WK86839 - Revision of B1015-20 Standard Practice for Form and Style of Standards Relating to Refined Nickel and Cobalt and Their Alloys
- WK86841 - Revision of A681-08(2022) Standard Specification for Tool Steels Alloy
- WK86844 - Revision of D1248-16 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
- WK86853 - Revision of F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- WK86857 - Revision of C94/C94M-22a Standard Specification for Ready-Mixed Concrete
- WK86863 - New Guide for Guideline for inspecting and collecting representative samples of No. 1 and No. 2 Copper scrap packages
- WK86867 - New Specification for Writing User Stories
- WK86868 - New Guide for Selection, Design, and Installation of Exterior Dimension Stone Paving Systems
- WK86870 - New Test Method for Determination of Rutting Resistance Using High Temperature Indirect Tensile (HT-IDT) Strength of Asphalt Mixtures
- WK86873 - New Test Method for Laboratory Assessment of Hydraulic Conductivity of stormwater filtration media
- WK86878 - New Specification for Additive manufacturing of metals -- Qualification principles -- Installation, operation and performance (IQ/OQ/PQ) of PBF-EB equipment
- WK86879 - New Practice for Practice Standard for the Design of Informational, Instructional and Warning Signage for patron-directed Amusement Rides and Devices.
- WK86881 - Revision of A1065/A1065M-18 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
- WK86901 - New Test Method for Determining Low Temperature Flexibility
- WK86908 - New Classification for TNR Classification
- WK86910 - Revision of F3133-21 Standard Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Stationary Wave Systems
- WK86916 - New Test Methods for Disturbance Rejection Testing of Legged Robots
- WK86921 - Revision of F2882/F2882M-17 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
- WK86923 - New Test Method for Effectiveness of Antifoaming Agents for Agriculture Tank Mix
- WK86935 - Revision of F1930-23 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin
- WK86937 - Revision of E824-10(2018)e1 Standard Test Method for Transfer of Calibration From Reference to Field Radiometers
- WK86943 - Revision of E2307-20 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
- WK86951 - New Specification for Undenatured Fuel Ethanol for Blending with Gasoline.
- WK86958 - Revision of G155-21 Standard Practice for Operating Xenon Arc Lamp Apparatus for Exposure of Materials
- WK86959 - Revision of ISO/ASTM51649-15 Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
- WK86969 - Revision of F710-22 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
- WK86971 - Revision of D5185-18 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- WK86988 - New Practice for Practice for Sampling Mycotoxins in Buildings
- WK86989 - New Practice for Standard Practice for the Collection of Endotoxins from Surfaces
- WK86995 - New Test Method for Condition Monitoring of Glycol in In-service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
- WK86996 - New Test Method for Condition Monitoring of Ester Breakdown I & II in In-Service Polyol Ester Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry
- WK87004 - Revision of B769-11(2021) Standard Test Method for Shear Testing of Aluminum Alloys
- WK87005 - Revision of B831-22 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
- WK87010 - Revision of D4175-22ae1 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
- WK87012 - Revision of C596-18 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
- WK87014 - Revision of C786/C786M-17 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-µm (No. 50), 150-µm (No. 100), and 75-µm (No. 200) Sieves by Wet Methods
- WK87024 - Revision of D2827-19 Standard Specification for Styrene Monomer
- WK87025 - Revision of E1903-19 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
- WK87031 - New Guide for Standard Guide for Techniques to Lower Microbial Load of Post-Harvest Inflorescence of Cannabis and Hemp
- WK87032 - Revision of G65-16(2021) Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
- WK87041 - New Test Methods for Measuring Length and Width of Industrial Hemp Fibers
- WK87043 - Reinstatement of D2273-08(2016) Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023)
- WK87045 - New Practice for Field Vibration Monitoring
- WK87047 - Revision of F2551-09(2016) Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
- WK87066 - Revision of D5706-16 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
- WK87073 - Revision of D6487-10(2019) Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
- WK87077 - Revision of C1014-17 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
- WK87078 - Revision of C1015-17 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
- WK87079 - Revision of C1064/C1064M-17 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
- WK87085 - Revision of E2749-15a(2019) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- WK87089 - Revision of F3272-18 Standard Guide for Selection, Care, and Use of Arc Protective Blankets
- WK87091 - Revision of D4729-19 Standard Test Method for In Situ Stress and Modulus of Deformation Using the Flat Jack Method
- WK87095 - Revision of F3341/F3341M-23 Standard Terminology for Unmanned Aircraft Systems
- WK87100 - Revision of E2307-20 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
- WK87104 - Revision of E136-22 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
- WK87105 - Revision of E136-22 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
- WK87106 - Revision of E136-22 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
- WK87110 - Revision of D8182-18 Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)
- WK87112 - Revision of D4956-19 Standard Specification for Retroreflective Sheeting for Traffic Control
- WK87117 - New Guide for Circular Plastics
- WK87129 - Revision of F2959-23 Standard Practice for Aerial Adventure Courses
- WK87130 - Revision of F2959-23 Standard Practice for Aerial Adventure Courses
- WK87138 - Revision of B148-18 Standard Specification for Aluminum-Bronze Sand Castings
- WK87139 - Revision of B369/B369M-20 Standard Specification for Copper-Nickel Alloy Castings
- WK87140 - Revision of B644-11(2017) Standard Specification for Copper Alloy Addition Agents
- WK87144 - Revision of E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- WK87149 - Revision of D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
- WK87150 - Revision of D8321-22 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements
- WK87153 - Revision of E2110-17 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- WK87157 - Revision of D4739-17 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
- WK87170 - New Guide for Melting representative samples of Copper and Copper Alloy particles into a representative solid button for chemical analysis
- WK87171 - Revision of A564/A564M-19a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- WK87175 - Revision of A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- WK87177 - Revision of F3125/F3125M-22 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- WK87178 - Revision of D4060-19 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
- WK87183 - Revision of A356/A356M-21 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
- WK87186 - Revision of B643-18 Standard Specification for Copper-Beryllium Alloy Seamless Tube
- WK87190 - Revision of C138/C138M-17a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
- WK87191 - New Test Method for Determination of Glass-Fiber Roving Chopping Rate for Glass Fiber Reinforced Concrete
- WK87201 - Revision of G182-13(2018) Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
- WK87202 - Revision of G194-08(2018) Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
- WK87207 - New Practice for Container Availability
- WK87209 - Revision of D8030/D8030M-23 Standard Practice for Sample Preparation for GCCM
- WK87212 - Revision of F3249-20 Standard Specification for Treestands, Climbing Sticks, and Tripod or Tower Stands
- WK87213 - New Practice for Robotic Assembly Task Boards: Recording Assembly Test Configuration
- WK87214 - New Test Method for Robotic Assembly Task Boards: Benchmarking performance
- WK87215 - New Terminology for FMC's MTDI Lexicon
- WK87218 - New Test Methods for Evaluating the ability of roof vents to resist the entry of flames and wind-driven burning embers
- WK87223 - Revision of A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
- WK87226 - New Test Method for Test Method for Determination of Asphaltene Content in Crude Petroleum and Petroleum Products by High Performance Liquid Chromatography with Evaporative Light Scattering Detector
- WK87228 - Revision of D7825-18 Standard Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer
- WK87229 - New Test Method for Standard test method for Dynamic Image Analysis for size determination of petroleum coke
- WK87231 - Revision of D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
- WK87239 - Revision of D6378-22 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)
- WK87241 - Revision of D596-01(2018) Standard Guide for Reporting Results of Analysis of Water
- WK87243 - New Guide for Visual Inspection of Single-Use Bioprocessing Equipment for Particulate Matter
- WK87244 - Revision of D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1
- WK87247 - Revision of D4439-23a Standard Terminology for Geosynthetics
- WK87259 - Revision of D5486/D5486M-06(2020) Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
- WK87266 - Revision of E2727-18 Standard Practice for Assessment of Rainwater Quality
- WK87272 - New Test Method for Determination of Elemental Content in Jet Fuel
- WK87288 - Withdrawal of B236M-07(2015) With Replacement B236-07(2015) Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)
- WK87295 - New Specification for Waterless Coolant for Electric Vehicles
- WK87299 - Revision of D1990-19 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
- WK87301 - Revision of F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- WK87303 - Revision of D1655-22a Standard Specification for Aviation Turbine Fuels
- WK87309 - New Specification for NON-PETROLEUM SYNTHESIZED ISO-PARAFFINIC BLEND COMPONENTS FOR USE IN AVIATION SPARK-IGNITION ENGINE
- WK87316 - New Test Methods for Determining the Susceptibility of Asphalt Mixtures to Cracking Using the Overlay Tester
- WK87343 - Reinstatement of D4774-11(2017) Standard Specification for User Applied Drug Labels in Anesthesiology (Withdrawn 2022)
- WK87344 - New Guide for Standard Guide for Solar Panel Cleaning Safety
- WK87346 - Revision of C618-23e1 Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- WK87354 - Revision of C1550-20 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
- WK87355 - New Specification for Residential Seating Designed to Recline with a Foot Support Lift Mechanism
- WK87357 - Revision of D1514-23 Standard Test Method for Carbon Black—Sieve Residue
- WK87366 - Revision of F2291-23 Standard Practice for Design of Amusement Rides and Devices
- WK87394 - Revision of F2793-14(2023) Standard Specification for Bicycle Grips
- WK87411 - Revision of E2357-18 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
- WK87421 - Revision of E18-22 Standard Test Methods for Rockwell Hardness of Metallic Materials
- WK87423 - Revision of D5589-19 Standard Test Method for Determining the Resistance of Paint Films and Related Coatings to Algal Defacement
- WK87425 - Reinstatement of F2965-13 Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments (Withdrawn 2022)
- WK87437 - New Test Methods for Analysis of Residual Solvents in Cannabis Extracts using Head-Space Gas Chromatography (HS-GC)
- WK87438 - New Test Methods for Analysis of Terpenoids in Cannabis Materials using Head-Space Gas Chromatography (HS-GC)
- WK87456 - Revision of C1646/C1646M-16 Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
- WK87458 - Revision of D2371-19 Standard Test Method for Pigment Content of Solvent-Reducible Paints
- WK87461 - Revision of D3960-05(2018) Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
- WK87462 - Revision of D1644-01(2023) Standard Test Methods for Nonvolatile Content of Varnishes
- WK87463 - New Test Method for Spectroscopic Identification and Quantification of Microplastic Particles in Water Using Infrared (IR) Spectroscopy
- WK87464 - Revision of F468-23 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
- WK87466 - Revision of D5930-17 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
- WK87471 - Revision of D892-18e1 Standard Test Method for Foaming Characteristics of Lubricating Oils
- WK87480 - New Test Method for Dry Powder rCB Particle Size Analysis via Laser Diffraction
- WK87487 - Revision of F876-23 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
- WK87489 - Revision of F2371-16 Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
- WK87493 - Revision of C1232-21a Standard Terminology for Masonry
- WK87516 - Revision of F1700-20 Standard Specification for Solid Vinyl Floor Tile
- WK87518 - Revision of E3169-18 Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
- WK87526 - Revision of E2348-17 Standard Guide for Framework for a Consensus-based Environmental Decision-making Process
- WK87532 - New Practice for Design, Manufacture, Installation and Testing of Impact Attenuation Devices used in Amusement Rides, Devices, Play Areas, and Attractions
- WK87540 - Revision of A1069/A1069M-19 Standard Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes
- WK87541 - New Test Method for Flame Resistance of Leather (12 / 60 second Vertical Burn Test)
- WK87552 - Revision of F711-17(2022) Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools
- WK87553 - New Test Method for the Determination of Wire Corrosion and Oxidation from Fluids in Liquid and Vapor States Within an Electrically Charged or Mechanical System
- WK87559 - Revision of D7843-21 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry
- WK87570 - Revision of D5477-18 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
- WK87572 - Revision of D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
- WK87577 - Revision of D445-21e2 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- WK87578 - Reinstatement of D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) (Withdrawn 2022)
- WK87584 - Withdrawal of C607-88(2016) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
- WK87647 - New Specification for Vanadium and Vanadium Alloy Ingots
- WK87648 - Withdrawal of D1747-09(2019) Standard Test Method for Refractive Index of Viscous Materials
- WK87651 - Revision of D226/D226M-17(2023) Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
- WK87652 - Revision of F3413-19e1 Guide for Additive Manufacturing — Design — Directed Energy Deposition
- WK87657 - Revision of A941-23 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK87658 - Reinstatement of D5755-09(2014)e1 Standard Test Method for Microvacuum Sampling and Indirect Analysis of Dust by Transmission Electron Microscopy for Asbestos Structure Number Surface Loading (Withdrawn 2023)
- WK87659 - Revision of D6114/D6114M-19 Standard Specification for Asphalt-Rubber Binder
- WK87671 - Revision of E1356-23 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
- WK87678 - Revision of E2921-22 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes, Standards, and Rating Systems
- WK87680 - New Test Method for Abrasion Resistance of Electrolytically Formed Oxide Coatings on Magnesium and Magnesium Alloy by a Taber-Type Abraser
- WK87681 - Revision of E1519-16(2020) Standard Terminology Relating to Agricultural Tank Mix Adjuvants
- WK87682 - Revision of D8336-21 Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure
- WK87687 - Revision of D7275-07(2018) Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs)
- WK87688 - Revision of D7274-06A(2018)e1 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs)
- WK87689 - Revision of D6455-11(2018) Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGMs)
- WK87690 - Revision of F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- WK87693 - Withdrawal of B236M-07(2015) Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) (Metric)
- WK87703 - Reinstatement of D1518-14 Standard Test Method for Thermal Resistance of Batting Systems Using a Hot Plate (Withdrawn 2023)
- WK87705 - Revision of D5994/D5994M-10(2021) Standard Test Method for Measuring Core Thickness of Textured Geomembranes
- WK87712 - Revision of C1883-19 Standard Practice for Sampling of Gaseous Enriched Uranium Hexafluoride
- WK87722 - Revision of D5608-16 Standard Practices for Decontamination of Sampling and Non Sample Contacting Equipment Used at Low Level Radioactive Waste Sites
- WK87723 - Reinstatement of D7242/D7242M-06(2013)e1 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022)
- WK87724 - Revision of C502-16 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
- WK87727 - New Guide for Establishing cleanliness limits for single use medical devices
- WK87735 - Revision of F1193-23 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK87740 - New Test Method for Residue testing of a ceramic slurry.
- WK87742 - Revision of E351-18 Standard Test Methods for Chemical Analysis of Cast Iron—All Types
- WK87748 - Revision of D3620-04(2023) Standard Specification for Glacial Acetic Acid
- WK87749 - Revision of A961/A961M-23 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- WK87751 - Revision of E748-19 Standard Guide for Thermal Neutron Radiography of Materials
- WK87759 - Revision of F2291-23 Standard Practice for Design of Amusement Rides and Devices
- WK87760 - Revision of F1700-20 Standard Specification for Solid Vinyl Floor Tile
- WK87761 - Revision of F3261-20 Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
- WK87765 - Revision of C1904-22 Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products
- WK87768 - Revision of F406-22 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- WK87770 - Revision of F3502-23a Standard Specification for Barrier Face Coverings
- WK87774 - Revision of D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
- WK87785 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK87786 - Revision of D6299-22e1 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- WK87788 - Reinstatement of E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters (Withdrawn 2023)
- WK87789 - Revision of E2546-15(2023) Standard Practice for Instrumented Indentation Testing
- WK87790 - Revision of F980-16 Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices
- WK87800 - New Test Method for Standard Test Method for Analysis of Amphibole and Serpentine Minerals in Talc and Other Bulk Mineral Powders by Polarized Light Microscopy
- WK87801 - New Test Method for Determination of Amphibole is materials by Heavy Liquid Separation (HLS).
- WK87802 - New Test Method for Determination of Amphibole Minerals by use of Sequential Acid-Base Digestion
- WK87803 - New Guide for Guide for Analytical Investigations to Determine Asbestos Content of Resulting Residue/Product from Asbestos Vitrification and/or Denaturing Processes
- WK87828 - Revision of C465-23 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
- WK87843 - Revision of F3532-22 Standard Practice for Protection of Aircraft Systems from Intentional Unauthorized Electronic Interactions
- WK87846 - New Test Method for Measuring the Susceptibility to Fungal Decay of Organic Infills Used in Artificial Turf
- WK87860 - Revision of F3097-22 Standard Practice for Installation of an Outside Sewer Service Cleanout through a Minimally Invasive Small Bore Vacuum Excavation and Same Day Restoration
- WK87861 - Revision of D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- WK87863 - Revision of D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels
- WK87865 - Revision of F3264-23 Standard Specification for Normal Category Aeroplanes Certification
- WK87866 - Revision of D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
- WK87871 - New Terminology for Supply Chain Key Terms
- WK87873 - Revision of C926-23 Standard Specification for Application of Portland Cement-Based Plaster
- WK87874 - Revision of C926-23 Standard Specification for Application of Portland Cement-Based Plaster
- WK87882 - New Specification for Carbon Fiber Reinforced Polymer (FRP) Bars and Strands for Concrete Reinforcement
- WK87909 - Revision of F3607-22 Standard Specification for Additive Manufacturing – Finished Part Properties – Maraging Steel via Powder Bed Fusion
- WK87910 - New Test Method for the Determination of Selected Elements in Aqueous Solutions by Single Quadrupole Inductively Coupled Plasma - Mass Spectrometry (ICP-MS)
- WK87917 - Revision of F448-18 Standard Test Method for Measuring Steady-State Primary Photocurrent
- WK87918 - Revision of F1467-18 Standard Guide for Use of an X-Ray Tester (˜10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits
- WK87922 - Withdrawal of D2562-94(2015) Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
- WK87923 - Withdrawal of D2563-08(2015) Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
- WK87924 - Withdrawal of D3846-08(2015) Standard Test Method for In-Plane Shear Strength of Reinforced Plastics
- WK87936 - Revision of D4725-15(2023) Standard Terminology for Engine Coolants and Related Fluids
- WK87937 - Revision of F970-22 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
- WK87952 - Revision of D8359-21 Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer
- WK87958 - Revision of D4814-22 Standard Specification for Automotive Spark-Ignition Engine Fuel
- WK87967 - New Specification for Compliance for Design of Integral Propulsors of Electric Engines for General Aviation and Vertical Takeoff and Landing (VTOL) Aircraft
- WK87971 - Revision of E1976-19 Standard Specification for Shelter, Tactical, Nonexpandable
- WK87972 - New Guide for Industry Requirements for Voluntary Spaceflight Safety Information Sharing Processes (VSS-ISP)
- WK87976 - Revision of D4015-21 Standard Test Methods for Modulus and Damping of Soils by Fixed-Base Resonant Column Devices
- WK87979 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK87985 - Revision of G1-03(2017)e1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens
- WK87991 - Revision of A985/A985M-21 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
- WK87998 - Revision of C1677-11a(2017) Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
- WK87999 - Revision of C1896-20 Standard Specification for Joints for Concrete Arch Pipe Using Profile Rubber Gaskets
- WK88006 - New Specification for Restricted substances used or contained in Materials to Manufacture Cannabis/Hemp Extract Vaporizers
- WK88010 - New Guide for Statistical Analysis of Fatigue-Life and Fatigue-Strength
- WK88024 - Revision of F2460-19 Standard Practice for Special Requirements for Bumper Boats
- WK88028 - Revision of D1970/D1970M-21 Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
- WK88033 - Revision of F877-23 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
- WK88034 - Revision of A962/A962M-23a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- WK88035 - Revision of B937-18 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)
- WK88040 - Revision of D5792-10(2015) Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
- WK88043 - Revision of E2500-20 Standard Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
- WK88051 - Revision of E793-06(2018) Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
- WK88052 - Revision of E1269-11(2018) Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
- WK88055 - New Guide for Medical Qualifications for Orbital Vehicle Passengers
- WK88059 - Revision of D8143-17(2022) Standard Test Method for Determination of the EU-8 List of PAH Compounds in Carbon Black
- WK88062 - Revision of F3084-22 Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
- WK88064 - Revision of F2601-18 Standard Specification for Fire Safety for Candle Accessories
- WK88087 - Revision of E384-22 Standard Test Method for Microindentation Hardness of Materials
- WK88088 - Revision of D7496-18 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
- WK88090 - Revision of E2750-23 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM E814
- WK88099 - New Guide for Lithium Battery Carriage
- WK88101 - Revision of C1460-21 Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
- WK88109 - Revision of D5404/D5404M-21 Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator
- WK88110 - Revision of D229-19e1 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
- WK88112 - Revision of F2532-19 Standard Guide for Determining Net Environmental Benefit of Dispersant Use
- WK88113 - Revision of F1280-19 Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
- WK88115 - Revision of C1077-17 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- WK88124 - New Test Method for Additive manufacturing for metals -- Qualification principles -- Test method for indentation plastometry
- WK88126 - New Specification for on the Essential Data Set for the Transport of Cargo
- WK88129 - Revision of C1040/C1040M-16a Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
- WK88130 - Revision of D8048-21ae1 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
- WK88132 - New Specification for Decorative Enamels on Flat Glass
- WK88133 - Revision of E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
- WK88140 - Revision of D3611-06(2019) Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
- WK88142 - New Practice for Standard Practices for Acoustical Material Testing Specimen Preparation
- WK88144 - Revision of D3180-15 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
- WK88148 - Revision of D975-23 Standard Specification for Diesel Fuel
- WK88150 - Revision of D4175-23 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
- WK88154 - Revision of ISO/ASTM52941-20 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application
- WK88158 - Revision of D1655-23a Standard Specification for Aviation Turbine Fuels
- WK88161 - Revision of E136-22 Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
- WK88162 - New Test Methods for Emulsified Asphalts
- WK88164 - Revision of E2760-19e1 Standard Test Method for Creep-Fatigue Crack Growth Testing
- WK88170 - Revision of F2052-21 Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
- WK88182 - Revision of G85-19 Standard Practice for Modified Salt Spray (Fog) Testing
- WK88186 - Revision of C39/C39M-21 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- WK88190 - New Specification for Adult Sexual Products
- WK88191 - Revision of F2376-23 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
- WK88192 - Revision of F2376-23 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
- WK88195 - New Practice for Emulsified Asphalts
- WK88198 - Revision of C614-20 Standard Test Method for Alkali Resistance of Porcelain Enamels
- WK88202 - New Practice for for the Design, Manufacture, Installation, Operation, Maintenance, and Inspection of Permanent Amusement Railway Rides, Devices, and Associated Facilities.
- WK88203 - Revision of F2291-23b Standard Practice for Design of Amusement Rides and Devices
- WK88204 - New Practice for Inspection and Maintenance of Steam Propelled Locomotives
- WK88205 - Revision of D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
- WK88215 - Revision of E521-23 Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
- WK88217 - Revision of D1079-20 Standard Terminology Relating to Roofing and Waterproofing
- WK88218 - Revision of D1079-20 Standard Terminology Relating to Roofing and Waterproofing
- WK88219 - New Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Terrains: Crate Stepfields
- WK88220 - Revision of D6956-17 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
- WK88221 - Revision of D5283-18 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
- WK88226 - Revision of F770-23 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- WK88232 - Revision of F3130-18 Standard Practice for Language Service Companies
- WK88234 - Revision of D8106-17 Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
- WK88235 - Reinstatement of A65-07(2013) Standard Specification for Steel Track Spikes (Withdrawn 2022)
- WK88241 - New Guide for Managing Sustainability in Dentistry with regards to Dental Facilities, Equipment and Consumables
- WK88245 - Revision of D5957-98(2021) Standard Guide for Flood Testing Horizontal Waterproofing Installations
- WK88263 - Revision of F624-09(2015)e1 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
- WK88264 - Revision of D5072-09(2016) Standard Test Method for Radon in Drinking Water
- WK88268 - New Specification for Specifications for Adult Foam Projectile Launchers
- WK88269 - New Specification for Adult Foam Dart Based Launchers Warnings
- WK88270 - New Specification for Projectiles Used with Adult Foam Dart Based Launchers
- WK88273 - Revision of C1922-23 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters by Way of Water Loss
- WK88277 - New Practice for Practice for Abrasive-Blasting Operations - Ventilation and Safe Practices for Fixed Location Enclosures
- WK88278 - New Practice for Laboratory Ventilation
- WK88279 - Revision of E1222-22 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
- WK88282 - New Guide for Designing for Recyclability of Single-Use Medical Products and Packaging
- WK88289 - Revision of E1687-19 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids
- WK88291 - Revision of B824-17 Standard Specification for General Requirements for Copper Alloy Castings
- WK88294 - New Guide for Constant Voltage AC Analogue for Systems and Equipment in Alternating Current Electric Vehicle Charging
- WK88295 - Revision of E2693-19 Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment
- WK88296 - Revision of D6055-96(2019) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
- WK88298 - New Specification for Standard Thermoplastic Crate Systems for Stormwater Retention and Detention Systems
- WK88300 - Revision of E1996-23 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
- WK88301 - Revision of E561-23 Standard Test Method for KR Curve Determination
- WK88305 - Revision of F606/F606M-21 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- WK88308 - New Specification for Autothrust System Installations
- WK88309 - Reinstatement of D5873-14 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method (Withdrawn 2023)
- WK88325 - Revision of A761/A761M-18 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- WK88326 - New Practice for Laboratory Decommissioning
- WK88332 - Revision of D7917-14(2018) Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications
- WK88338 - Revision of D8117-21 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry
- WK88339 - Revision of D5885/D5885M-20 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
- WK88341 - Revision of E103-17 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials
- WK88343 - Revision of F2346-18 Standard Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
- WK88344 - Revision of E238-17a Standard Test Method for Pin-Type Bearing Test of Metallic Materials
- WK88347 - Revision of E1444/E1444M-22a Standard Practice for Magnetic Particle Testing for Aerospace
- WK88349 - Revision of A516/A516M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
- WK88354 - Revision of D975-23 Standard Specification for Diesel Fuel
- WK88356 - Revision of F2706-18 Standard Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
- WK88359 - New Specification for Performance Zinc/Aluminum/Copper alloy
- WK88360 - Withdrawal of D5998-16 Standard Specification for Molded Polyethylene Shipping and Storage Drums
- WK88361 - Revision of A751-21 Standard Test Methods and Practices for Chemical Analysis of Steel Products
- WK88363 - Revision of F1740-96(2018) Standard Guide for Inspection of Nylon, Polyester, or Nylon/Polyester Blend, or Both Kernmantle Rope
- WK88419 - Revision of D1512-23 Standard Test Methods for Carbon Black—pH Value
- WK88423 - Revision of E1424-22 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
- WK88424 - Revision of E405-04(2018) Standard Test Methods for Wear Testing Rotary Operators for Windows
- WK88426 - Revision of D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
- WK88432 - Withdrawal of E1917-13(2018) Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
- WK88433 - Revision of C1880-19 Standard Practice for Sampling Gaseous Uranium Hexafluoride using Alumina Pellets
- WK88448 - Revision of F3341/F3341M-23 Standard Terminology for Unmanned Aircraft Systems
- WK88452 - Revision of E1806-23 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
- WK88473 - Revision of D4169-22 Standard Practice for Performance Testing of Shipping Containers and Systems
- WK88474 - Revision of D5264-98(2019) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
- WK88481 - Revision of A182/A182M-23 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- WK88482 - New Guide for Classifying Extracellular Matrices for Use as Tissue Engineered Medical Products
- WK88483 - New Test Methods for Locking Mechanisms for Locking Plate and Screw Systems
- WK88484 - New Specification for Standard Specification for Basalt and Glass Fiber Reinforced Polymer (FRP) Mesh for Concrete Reinforcement
- WK88485 - New Terminology for Standard Terminology for Composite materials applied to Civil Engineering Structures
- WK88486 - Revision of F1891-19 Standard Specification for Arc and Flame Resistant Rainwear
- WK88489 - Revision of C167-22 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
- WK88490 - New Practice for Physical Fit Analysis Training Program
- WK88493 - Revision of D8487-23 Standard Specification for Natural Gas, Hydrogen Blends for Use as a Motor Vehicle Fuel
- WK88496 - Revision of D6281-23 Standard Test Method for Airborne Asbestos Concentration in Ambient and Indoor Atmospheres as Determined by Transmission Electron Microscopy Direct Transfer (TEM)
- WK88501 - Revision of G223-23 Standard Test Method for Measuring Friction and Adhesive Wear Properties of Lubricated and Nonlubricated Materials Using the Twist Compression Test (TCT)
- WK88508 - Revision of F2230-19 Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
- WK88518 - Revision of F3089-23 Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions
- WK88519 - Revision of F2212-20 Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
- WK88520 - Revision of D143-22 Standard Test Methods for Small Clear Specimens of Timber
- WK88532 - Revision of B548-03(2017) Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
- WK88535 - Revision of E1413-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration onto an Adsorbent Tube
- WK88536 - Revision of E1610-18 Standard Guide for Forensic Paint Analysis and Comparison
- WK88537 - Revision of E1967-19 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
- WK88538 - Revision of E2330-19 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons
- WK88539 - Revision of E2926-17 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry
- WK88540 - Revision of E2937-18 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations
- WK88542 - Revision of B964-23 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel
- WK88543 - Revision of E2882-19 Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
- WK88544 - Revision of E1412-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Activated Charcoal
- WK8855 - New Standard Terminology for Yarn Spinning Systems
- WK88550 - Revision of F2657-21 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
- WK88553 - Revision of E2663-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods
- WK88554 - Revision of E3189-19 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Static Headspace Concentration onto an Adsorbent Tube
- WK88561 - Revision of F2216-17a Standard Specification for Selectorized Strength Equipment
- WK88562 - Revision of F2277-17a Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
- WK88563 - Revision of F2276-23 Standard Specification for Fitness Equipment
- WK88564 - Revision of C1485-19 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
- WK88568 - Revision of F2733-21 Standard Specification for Flame-Resistant Rainwear for Protection Against Flame Hazards
- WK88571 - New Terminology for E50.02 TERMINOLOGY
- WK88573 - Revision of F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- WK88581 - New Test Method for Determination of Extractable Per- and Polyfluoroalkyl Substances (PFAS) in Solid Matrices by Solvent Extraction, Filtering and followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
- WK88587 - Revision of E3051-16 Standard Guide for Specification, Design, Verification, and Application of Single-Use Systems in Pharmaceutical and Biopharmaceutical Manufacturing
- WK88589 - Revision of F623-19 Standard Performance Specification for Foley Catheter
- WK88597 - Revision of E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems
- WK88600 - Revision of E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- WK88601 - Revision of F2194-22e1 Standard Consumer Safety Specification for Bassinets and Cradles
- WK88603 - Revision of A213/A213M-23 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- WK88606 - Revision of A269/A269M-22 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
- WK88607 - Revision of A276/A276M-23 Standard Specification for Stainless Steel Bars and Shapes
- WK88608 - Revision of A312/A312M-22a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
- WK88610 - Revision of A479/A479M-23a Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
- WK88613 - Revision of A314-23 Standard Specification for Stainless Steel Billets and Bars for Forging
- WK88614 - Revision of D5745-23 Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation
- WK88617 - New Terminology for NSAC Recommended Minimum Required Data Set
- WK88621 - Revision of A403/A403M-22b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
- WK88626 - Revision of D7262-23 Standard Test Methods for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
- WK88630 - Revision of F2959-23a Standard Practice for Aerial Adventure Courses
- WK88631 - Revision of F2959-23a Standard Practice for Aerial Adventure Courses
- WK88643 - Revision of C595/C595M-23 Standard Specification for Blended Hydraulic Cements
- WK88647 - Revision of C390-08(2019) Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
- WK88661 - New Guide for Selection and Use of Movement Joint Seals in Waterproofing
- WK88663 - Revision of E349-06(2019)e1 Standard Terminology Relating to Space Simulation
- WK88664 - Revision of F406-22 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- WK88668 - New Guide for Tire Pyrolysis Oil (TPO) testing methods
- WK88673 - Revision of E1316-23b Standard Terminology for Nondestructive Examinations
- WK88674 - Revision of F412-23 Standard Terminology Relating to Plastic Piping Systems
- WK88678 - Revision of D93-20 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- WK88682 - Revision of F1292-22 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
- WK88684 - Revision of E1820-23b Standard Test Method for Measurement of Fracture Toughness
- WK88686 - Revision of C1224-22 Standard Specification for Reflective Insulation for Building Applications
- WK88687 - Revision of C1224-22 Standard Specification for Reflective Insulation for Building Applications
- WK88696 - New Guide for Standard Technical Guide for Printing Method Effects on Facial Comparisons
- WK88697 - New Practice for Standard Practice for Scanning of Facial Images
- WK88699 - Revision of E72-22 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
- WK88700 - Revision of E2126-19 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
- WK88705 - Reinstatement of C1441-13 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy (Withdrawn 2022)
- WK88709 - Revision of D6589-23 Standard Guide for Statistical Evaluation of Atmospheric Dispersion Model Performance
- WK88711 - Revision of E430-23 Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
- WK88712 - Revision of C497-20e1 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
- WK88713 - Revision of C497M-20a Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
- WK88719 - Revision of D525-12a(2019) Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)
- WK88720 - New Specification for Standard Guide for Advanced Air Mobility (AAM) Maintenance Technician Qualification
- WK88722 - Withdrawal of A908-03(2019) Standard Specification for Stainless Steel Needle Tubing
- WK88734 - Revision of D5234-92(2017) Standard Guide for Analysis of Ethylene Product
- WK88740 - Reinstatement of D885/D885M-10A(2014)e1 Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023)
- WK88748 - Revision of C1609/C1609M-19a Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
- WK88751 - Revision of D4642-04(2016) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry
- WK88765 - Revision of C174/C174M-17 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
- WK88766 - Revision of C1542/C1542M-19 Standard Test Method for Measuring Length of Concrete Cores
- WK88768 - Revision of D7566-23b Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK88773 - New Guide for Fatigue Strength Characterization of Components, Coupons, and Surrogates for Metallic Cardiovascular Medical Devices
- WK88779 - Revision of D1618-23 Standard Test Method for Carbon Black Extractables—Transmittance of Toluene Extract
- WK88785 - Revision of C1778-22 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
- WK88789 - Revision of A519/A519M-23 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
- WK88791 - New Terminology for Standard Terminology Related to Pesticide Application with Drones
- WK88793 - Revision of B809-95(2018) Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)
- WK88795 - Revision of B877-96(2018) Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method
- WK88796 - Revision of C1027-19 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
- WK88797 - Withdrawal of D3266-91(2018) Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)
- WK88798 - Revision of C1697-21 Standard Specification for Blended Supplementary Cementitious Materials
- WK88803 - Revision of C856/C856M-20 Standard Practice for Petrographic Examination of Hardened Concrete
- WK88804 - Revision of C856/C856M-20 Standard Practice for Petrographic Examination of Hardened Concrete
- WK88806 - New Test Method for Standard Test Method for Water Content in Cementitious Mixtures by Rapid Evaporation
- WK88809 - Revision of F2959-23a Standard Practice for Aerial Adventure Courses
- WK88810 - Revision of C192/C192M-19 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
- WK88815 - Revision of C192/C192M-19 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
- WK88816 - Revision of E2579-23b Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
- WK88819 - Revision of C31/C31M-23 Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK88821 - Revision of C31/C31M-23 Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK88824 - Revision of C31/C31M-23 Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK88825 - Revision of E329-21 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK88826 - Revision of D2444-21 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
- WK88828 - New Test Method for Measuring Olefin Concentration in Gasoline by Raman Spectroscopy
- WK88829 - Revision of C94/C94M-23 Standard Specification for Ready-Mixed Concrete
- WK88831 - Revision of E1820-23b Standard Test Method for Measurement of Fracture Toughness
- WK88832 - New Practice for Standard Practice for The Collection of Primer Gunshot Residue (pGSR) Particles from Clothing, Vehicles, and Other Inanimate Objects using Scanning Electron Microscopy (SEM) Stubs
- WK88834 - Revision of D4693-07(2021) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
- WK88835 - Revision of F645-18b Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
- WK88837 - New Test Method for Compression Properties of Flexible Cellular Materials
- WK88838 - New Guide for Plural Component Pavement Marking Systems
- WK88846 - Revision of F3432-20a Standard Practice for Powerplant Instruments
- WK88847 - Revision of F3066/F3066M-23 Standard Specification for Aircraft Powerplant Installation Hazard Mitigation
- WK88848 - Revision of F3064/F3064M-21 Standard Specification for Aircraft Powerplant Control, Operation, and Indication
- WK88849 - Revision of F3063/F3063M-21 Standard Specification for Aircraft Fuel Storage and Delivery
- WK88851 - Revision of F3062/F3062M-20 Standard Specification for Aircraft Powerplant Installation
- WK88853 - Revision of D3370-18 Standard Practices for Sampling Water from Flowing Process Streams
- WK88854 - Revision of C31/C31M-23 Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK88867 - Revision of F1163-23 Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
- WK88870 - Revision of C1154-23 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
- WK88871 - Revision of C1325-22e1 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units
- WK88872 - Revision of D8112-22 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid
- WK88883 - New Test Method for Kinematic VIscosity for In-Service Oil Analysis Using Solventless Viscometer
- WK88885 - New Test Method for Effect of Fuel on Asphalt Mixtures
- WK88886 - Revision of F3668/F3668M-23 Standard Guide for Occupant Survivability in Orbital Vehicles
- WK88888 - Revision of F2618-21 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
- WK88889 - Revision of C110-20 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
- WK88890 - Revision of C1764-20 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
- WK88891 - Revision of C1788-20 Standard Specification for Non Metallic Plaster Bases (Lath) Used With Portland Cement Based Plaster in Vertical Wall Applications
- WK88907 - Revision of D7995-19 Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration
- WK88909 - Revision of C1232-21a Standard Terminology for Masonry
- WK88912 - Revision of C1232-21a Standard Terminology for Masonry
- WK88913 - Revision of C1232-21a Standard Terminology for Masonry
- WK88914 - Revision of F141-23 Standard Terminology Relating to Resilient Floor Coverings
- WK88915 - Revision of E3318-23 Standard Terminology for Standards Relating to Stormwater Control Measures
- WK88916 - Revision of C1289-23a Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
- WK88920 - Revision of B790/B790M-16(2021) Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
- WK88929 - Revision of F2098-18 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
- WK88931 - Revision of D3878-23 Standard Terminology for Composite Materials
- WK88932 - Revision of E84-23c Standard Test Method for Surface Burning Characteristics of Building Materials
- WK88937 - Revision of F2922-13(2018) Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
- WK88941 - Revision of F2942-19 Standard Guide for in vitro Axial, Bending, and Torsional Durability Testing of Vascular Stents
- WK88945 - Revision of D1321-16a Standard Test Method for Needle Penetration of Petroleum Waxes
- WK88946 - New Specification for Electric Powered Balance Bike
- WK88948 - Revision of C836/C836M-18(2022) Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
- WK88949 - Revision of F594-22 Standard Specification for Stainless Steel Nuts
- WK88950 - Revision of A480/A480M-23b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- WK88951 - Revision of C1232-21a Standard Terminology for Masonry
- WK88952 - New Test Method for Total Water in Dimethyl Ether by Liquefied Gas Sampler and Coulometric Karl Fischer Titration
- WK88955 - Revision of D7956/D7956M-16 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
- WK88956 - Revision of C297/C297M-16 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
- WK88960 - Revision of A615/A615M-22 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- WK88961 - Revision of A706/A706M-22a Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
- WK88963 - Revision of C231/C231M-22 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- WK88965 - Revision of D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge
- WK88966 - New Terminology for Supply Chain Stakeholders
- WK88969 - Revision of C1325-22e1 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units
- WK88979 - Revision of D1655-23a Standard Specification for Aviation Turbine Fuels
- WK88980 - Revision of D7566-23b Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK88983 - Revision of D6815-22a Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
- WK88985 - New Guide for Construction Progress Reporting and Monitoring
- WK88987 - New Test Method for Ultrashort Chain PFAS
- WK89000 - Revision of C803/C803M-18 Standard Test Method for Penetration Resistance of Hardened Concrete
- WK89002 - Revision of D1079-20 Standard Terminology Relating to Roofing and Waterproofing
- WK89003 - Revision of D6496/D6496M-23a Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
- WK89004 - Revision of D1079-20 Standard Terminology Relating to Roofing and Waterproofing
- WK89005 - Revision of D1079-20 Standard Terminology Relating to Roofing and Waterproofing
- WK89006 - Revision of D1079-20 Standard Terminology Relating to Roofing and Waterproofing
- WK89010 - Revision of F2966-19 Standard Guide for Snow and Ice Control for Walkway Surfaces
- WK89016 - Revision of F2097-23 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
- WK89027 - Revision of E2986-22 Standard Guide for Evaluation of Environmental Aspects of Sustainability of Manufacturing Processes
- WK89031 - Revision of E119-22 Standard Test Methods for Fire Tests of Building Construction and Materials
- WK89032 - Revision of D6769/D6769M-02(2018) Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
- WK89033 - Revision of F1066-04(2018) Standard Specification for Vinyl Composition Floor Tile
- WK89035 - Revision of F1700-20 Standard Specification for Solid Vinyl Floor Tile
- WK89038 - New Specification for Precast Concrete Water Holding Tanks
- WK89039 - Revision of B432-19 Standard Specification for Copper and Copper Alloy Clad Steel Plate
- WK89040 - Revision of B694-19 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding
- WK89044 - Revision of F2047-00(2019) Standard Practice for Workers’ Compensation Coverage of Emergency Services Volunteers
- WK89045 - Revision of F2954-19 Standard Guide for Training for Intermediate Rope Rescuer Endorsement
- WK89046 - Revision of F2955-19 Standard Guide for Training for Advanced Rope Rescuer Endorsement
- WK89059 - Revision of F1066-23 Standard Specification for Vinyl Composition Floor Tile
- WK89078 - Revision of A99-03(2019) Standard Specification for Ferromanganese
- WK89079 - Revision of A101-04(2019) Standard Specification for Ferrochromium
- WK89080 - Revision of A102-04(2019) Standard Specification for Ferrovanadium
- WK89081 - Revision of A132-04(2019) Standard Specification for Ferromolybdenum
- WK89088 - Revision of E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- WK89090 - Revision of E92-23 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- WK89094 - Revision of F1538-03(2017) Standard Specification for Glass and Glass Ceramic Biomaterials for Implantation
- WK89102 - New Specification for Impact Attenuation of Ski Area Padding
- WK89103 - Revision of D8056-18 Standard Guide for Elemental Analysis of Crude Oil
- WK89105 - Revision of D5798-21 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
- WK89106 - Revision of D4806-21a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
- WK89110 - New Practice for Hazardous Area Electrical Equipment on International Ships
- WK89111 - Revision of E1212-17 Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies
- WK89112 - Revision of E1359-17 Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies
- WK89114 - Revision of D5549-19 Standard Guide for Contents of Geostatistical Site Investigation Report
- WK89115 - Revision of D5922-18 Standard Guide for Analysis, Interpretation, and Modeling of Spatial Variation in Geostatistical Site Investigations
- WK89119 - New Test Methods for IEC/ASTM 62885-10 Battery-related items for surface cleaning appliances for household or similar use - Methods for measuring the performance
- WK89121 - Revision of D6376-10(2017)e1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy
- WK89122 - Revision of D7396-14(2020) Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
- WK89125 - Revision of E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
- WK89126 - Revision of E2110-17 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
- WK89129 - New Test Method for a Simulated Workplace Protection Factor Protocol
- WK89130 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK89131 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK89133 - New Test Method for Determination of Total Organic Halide Content in Plastics using Combustion Ion Chromatography
- WK89148 - Revision of D2990-17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
- WK89150 - Revision of E860-22 Standard Practice for Examining and Preparing Items That Are or May Become Involved in Criminal or Civil Litigation
- WK89156 - Revision of E1795-20a Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
- WK89164 - Revision of D4585/D4585M-18 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
- WK89167 - Revision of A733-16(2022) Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
- WK89168 - Revision of C1232-23 Standard Terminology for Masonry
- WK89171 - New Practice for Standard Practice for the Inspection of Steel Castings using Phased Array Ultrasound
- WK89172 - Revision of F1973-21 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
- WK89173 - Revision of E2098/E2098M-13(2023) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
- WK89174 - Revision of E2359/E2359M-13(2023) Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
- WK89177 - Revision of D5923-18 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
- WK89187 - Revision of B594-19e1 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
- WK89194 - Revision of E376-19 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods
- WK89196 - Revision of E2934-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods
- WK89197 - Revision of E2446-23 Standard Practice for Manufacturing Characterization of Computed Radiography Systems
- WK89198 - New Practice for Mobile Manipulator Performance: Continuous Tasks
- WK89200 - New Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Secondary Capture (SC) of Information
- WK89203 - Revision of D5924-18 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
- WK89210 - Revision of E1191-03A(2023)e1 Standard Guide for Conducting Life-Cycle Toxicity Tests with Saltwater Mysids
- WK89212 - New Test Method for Additive Manufacturing - Feedstock Materials -- Tensile Testing Method for Filaments used in Material Extrusion
- WK89214 - Revision of D8396-22 Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36?°C and 343?°C by Flow Modulated GCxGC?–?FID
- WK89220 - New Guide for Emergency Response Plan for Spaceports
- WK89223 - Revision of E1999-23 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry
- WK89228 - Revision of C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- WK89229 - Revision of C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- WK89238 - Revision of C1193-16(2023) Standard Guide for Use of Joint Sealants
- WK89240 - Revision of E2201-13(2020) Standard Terminology for Coal Combustion Products
- WK89243 - New Specification for Aircraft Design and Construction
- WK89244 - Revision of E1820-23b Standard Test Method for Measurement of Fracture Toughness
- WK89245 - Revision of C717-19 Standard Terminology of Building Seals and Sealants
- WK89247 - Revision of F2007-18 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
- WK89256 - Revision of D1585-15(2020) Standard Test Methods for Fatty Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products
- WK89257 - Revision of D464-15(2020) Standard Test Methods for Saponification Number of Pine Chemical Products Including Tall Oil and Other Related Products
- WK89259 - Revision of D269-97(2020) Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives
- WK89260 - Revision of D509-20 Standard Test Methods of Sampling and Grading Rosin
- WK89261 - Revision of D465-15(2020) Standard Test Methods for Acid Number of Pine Chemical Products Including Tall Oil and Other Related Products
- WK89264 - Revision of D1981-11(2020)e1 Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids
- WK89265 - Revision of D5974-20 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography
- WK89266 - Revision of D7247-17 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
- WK89277 - Revision of E1201-19 Standard Practice for Sampling Zooplankton with Conical Tow Nets
- WK89280 - Revision of E1885-18 Standard Test Method for Sensory Analysis—Triangle Test
- WK89281 - Revision of E2610-18 Standard Test Method for Sensory Analysis—Duo-Trio Test
- WK89283 - Revision of E3137/E3137M-18 Standard Specification for Heat Meter Instrumentation
- WK89285 - Revision of E3149-18 Standard Guide for Facial Image Comparison Feature List for Morphological Analysis
- WK89286 - Revision of C1821/C1821M-16(2021)e1 Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
- WK89287 - Revision of D7480-21 Standard Guide for Evaluating the Attributes of a Forest Management Plan
- WK89289 - Revision of C1232-23 Standard Terminology for Masonry
- WK89291 - New Specification for Noise Level Testing Requirements
- WK89292 - Revision of D332-87(2020) Standard Test Method for Relative Tinting Strength of White Pigments by Visual Observation
- WK89294 - Revision of F959/F959M-17a(2023) Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
- WK89299 - Revision of ISO/ASTM52939-23 Additive manufacturing for construction — Qualification principles — Structural and infrastructure elements
- WK89302 - Revision of F2291-23b Standard Practice for Design of Amusement Rides and Devices
- WK89313 - Revision of F3184-16 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion
- WK89314 - Revision of F2100-23 Standard Specification for Performance of Materials Used in Medical Face Masks
- WK89315 - Revision of G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
- WK89317 - Revision of D4790-23 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
- WK89319 - Revision of D586-23 Standard Test Method for Ash and Organic Matter Content of Degradable Erosion Control Products
- WK89320 - Revision of D6826-23 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
- WK89321 - Revision of D7367/D7367M-22 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
- WK89322 - Revision of D7560-22 Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
- WK89323 - Revision of D8082-18 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
- WK89324 - Revision of D8198-18 Standard Specification for Hydraulically Applied 100?% Wood Fiber Mulches
- WK89325 - Revision of D8199-20 Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control
- WK89326 - Revision of D8297/D8297M-23 Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope
- WK89327 - Revision of D7986-17a Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
- WK89328 - Revision of D8298/D8298M-23 Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope
- WK89329 - Revision of D8326-21 Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall
- WK89330 - Revision of D2944-22 Standard Practice of Sampling Processed Peat Materials for Horticultural Purposes
- WK89331 - Revision of D2978-23 Standard Test Method for Volume of Peat and Peat-Based Growing Media
- WK89332 - Revision of D4531-23 Standard Test Methods for Bulk and Dry Density of Peat and Peat Products
- WK89333 - Revision of D4544-20 Standard Practice for Estimating Peat Deposit Thickness
- WK89334 - Revision of D5715-23 Standard Practice for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
- WK89335 - New Specification for Big Girls Plus Standard Table of Measurements
- WK89336 - Revision of C119-23 Standard Terminology Relating to Dimension Stone
- WK89339 - Revision of D4186/D4186M-20e1 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
- WK89340 - Revision of D7803-19 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
- WK89347 - Revision of G166-00(2020) Standard Guide for Statistical Analysis of Service Life Data
- WK89350 - Revision of D8178-22 Standard Terminology Relating to Recovered Carbon Black (rCB)
- WK89351 - Revision of D2977-22 Standard Practice for Particle Size Range of Peat Materials for Horticultural Purposes
- WK89356 - Revision of C1521-19(2020) Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
- WK89357 - Revision of G130-12(2020) Standard Test Method for Calibration of Narrow- and Broad-Band Ultraviolet Radiometers Using a Spectroradiometer
- WK89359 - Revision of D3878-23 Standard Terminology for Composite Materials
- WK89363 - Revision of D6007-22 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber
- WK89364 - Revision of E1333-22 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
- WK89369 - Revision of E704-19 Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
- WK89370 - Revision of D7583-16(2023) Standard Test Method for John Deere Coolant Cavitation Test
- WK89371 - New Specification for Standard Specification for Circular Precast Concrete Culvert, Storm Drain, and Sewer Pipe for Microtunneling
- WK89374 - Revision of D8245-19 Standard Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream Products
- WK89376 - Reinstatement of F1773-09(2015) Standard Terminology Relating to Climbing, Mountaineering, Search and Rescue Equipment and Practices (Withdrawn 2024)
- WK89377 - Revision of D8202-18 Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches
- WK89382 - New Practice for Characterization of Rigid Vinyl Recycled Content
- WK89388 - New Guide for selection of systems for measurement of radioactive samples by gamma ray spectroscopy
- WK89397 - New Practice for System of Classification of Pyranometers and Pyrheliometers
- WK89402 - Revision of G207-11(2019)e1 Standard Test Method for Indoor Transfer of Calibration from Reference to Field Pyranometers
- WK89403 - Revision of G138-12(2020)e1 Standard Test Method for Calibration of a Spectroradiometer Using a Standard Source of Irradiance
- WK89406 - New Test Methods for Determining Snapping Pressure of Snap Fasteners
- WK89408 - Revision of G42-11(2019)e1 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
- WK89409 - New Guide for Facial Comparison: Overview and Methodology Guidelines
- WK89410 - Revision of D6031/D6031M-24 Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
- WK89415 - Revision of D3321-19(2023) Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
- WK89416 - New Test Method for Determination of Inorganic Halogenated Compounds and Formic Acid in Hydrogen by Ion Chromatography
- WK89425 - Revision of E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy
- WK89426 - Revision of A913/A913M-19 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
- WK89428 - New Specification for Passive Galvanic Protection (PGP) Solutions for Steel Reinforcing Bars
- WK89437 - Revision of E668-20 Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
- WK89438 - Revision of E265-15(2020) Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
- WK89440 - Revision of F589-23 Standard Consumer Safety Specification for Non-Powder Guns
- WK89441 - Revision of F590-22 Standard Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
- WK89442 - Revision of F589-23 Standard Consumer Safety Specification for Non-Powder Guns
- WK89446 - Revision of D1238-23a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
- WK89448 - Revision of D3631-99(2017) Standard Test Methods for Measuring Surface Atmospheric Pressure
- WK89451 - Revision of C1865-18 Standard Test Method for The Determination of Carbon and Sulfur Content in Plutonium Oxide Powder by the Direct Combustion-Infrared Spectrophotometer
- WK89452 - Revision of C1770-21 Standard Test Method for ?Determination of Loose and Tapped Bulk Densities of Small Quantities of Plutonium Oxide
- WK89458 - Revision of D7857-16 Standard Test Method for Evaluating the Flexural Properties and Internal Bond Strength of Fire-Retarded Mat-Formed Wood Structural Composite Panels Exposed to Elevated Temperatures
- WK89462 - Revision of F714-22 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
- WK89464 - Revision of D3532/D3532M-19 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
- WK89465 - Revision of D8151-19e1 Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing
- WK89467 - Revision of C547-22a Standard Specification for Mineral Fiber Pipe Insulation
- WK89468 - Revision of C547-22a Standard Specification for Mineral Fiber Pipe Insulation
- WK89478 - Revision of F141-23 Standard Terminology Relating to Resilient Floor Coverings
- WK89482 - Revision of F2780-20 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
- WK89483 - Revision of A1124/A1124M-23 Standard Specification for Textured Epoxy-Coated Steel Reinforcing Bars
- WK89486 - Revision of F1926/F1926M-14(2021) Standard Test Method for Dissolution Testing of Calcium Phosphate Granules, Fabricated Forms, and Coatings
- WK89487 - Revision of A1034/A1034M-24 Standard Specification for Mechanical Splices for Steel Reinforcing Bars
- WK89488 - Revision of E2843-17 Standard Specification for Demonstrating That a Building is in Walkable Proximity to Neighborhood Assets
- WK89490 - Revision of D1883-21 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils
- WK89493 - New Guide for Forensic Trace Evidence Recovery
- WK89513 - Revision of D4217-07(2017) Standard Test Method for Gel Time of Thermosetting Coating Powder
- WK89514 - Revision of D4242-07(2017) Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
- WK89517 - Revision of D968-22 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
- WK89518 - Revision of D870-15(2020) Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
- WK89519 - Revision of D2247-15(2020) Standard Practice for Testing Water Resistance of Coatings in 100?% Relative Humidity
- WK89520 - Revision of D2803-09(2020) Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal
- WK89521 - Revision of D5722-20 Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure
- WK89530 - Revision of C1256-93(2019) Standard Practice for Interpreting Glass Fracture Surface Features
- WK89531 - Revision of F2992-23 Standard Test Method for Measuring Cut Resistance of Materials Used in Protective Clothing with Tomodynamometer Test Equipment
- WK89532 - Revision of D4761-19 Standard Test Methods for Mechanical Properties of Lumber and Wood-Based Structural Materials
- WK89534 - New Test Method for Test Method for Environmental Assisted Cracking
- WK89536 - New Guide for Multi-spectral Analysis of Surface Waves (MASW)
- WK89539 - Revision of D1655-23a Standard Specification for Aviation Turbine Fuels
- WK89540 - Revision of D1655-23a Standard Specification for Aviation Turbine Fuels
- WK89541 - Revision of D1655-23a Standard Specification for Aviation Turbine Fuels
- WK89550 - Revision of D7566-23b Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK89551 - Revision of D7566-23b Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK89560 - Revision of F3230-21a Standard Practice for Safety Assessment of Systems and Equipment in Small Aircraft
- WK89561 - New Practice for Endurance Testing of Aeroplane Flight Control System Actuators and other System Elements
- WK89562 - Revision of E3191-18 Standard Specification for Permanent Foaming Fixatives Used to Mitigate Spread of Radioactive Contamination
- WK89563 - Revision of D975-23a Standard Specification for Diesel Fuel
- WK89567 - Revision of D7093-19 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome
- WK89569 - Revision of E88-11(2017) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition
- WK89572 - Revision of D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- WK89574 - Revision of D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
- WK89575 - Revision of D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
- WK89579 - Reinstatement of D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024)
- WK89581 - Reinstatement of D6030-15 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability (Withdrawn 2024)
- WK89583 - Revision of G160-12(2019) Standard Practice for Evaluating Microbial Susceptibility of Nonmetallic Materials By Laboratory Soil Burial
- WK89586 - Revision of D847-23 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
- WK89587 - Revision of D849-15(2019)e1 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
- WK89590 - Revision of D7266-23 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)
- WK89593 - Revision of D8166-22 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors
- WK89598 - New Specification for Performance of a Riding Crop Used in Equestrian Activities
- WK89599 - New Specification for the Performance of a Child Motorcycle Helmet
- WK89600 - New Specification for the Performance of Cut Resistant Clothing Used in Ice Hockey
- WK89602 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK89604 - Revision of D7386-16 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
- WK89605 - Revision of E2485/E2485M-13(2018) Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
- WK89611 - New Practice for Determination of the Product Carbon Footprint for Lubricants
- WK89617 - New Practice for testing
- WK89624 - Revision of C1145-19 Standard Terminology of Advanced Ceramics
- WK89631 - Revision of D8305-19 Standard Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography
- WK89632 - Revision of D1319-20a Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption
- WK89636 - Revision of D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK89637 - Revision of D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK89640 - Reinstatement of D7316-14 Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions (Withdrawn 2023)
- WK89641 - Reinstatement of D7362-14 Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition (Withdrawn 2023)
- WK89642 - Revision of D4047-18 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
- WK89649 - Revision of A370-23 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- WK89653 - Revision of F3200-23 Standard Terminology for Robotics, Automation, and Autonomous Systems
- WK89654 - New Practice for standard practice for atmospheric leaks using a solid-state sensor as a detector probe
- WK89655 - New Practice for Standard Practice for Pressure Rate of Rise Leak Test Method
- WK89659 - Revision of E2026-16a Standard Guide for Seismic Risk Assessment of Buildings
- WK89660 - Revision of E2557-16a Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
- WK89661 - Reinstatement of C666/C666M-15 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
- WK89662 - New Guide for the Criteria and Classification of Medical Grade Polymers for Non-Implantable Applications
- WK89664 - Revision of D8267-19a Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- WK89665 - Revision of D6913/D6913M-17 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
- WK89666 - New Test Method for Tensile Creep Compliance and Tensile Failure Limits of Asphalt Mixtures Using the Superpave Indirect Tension (IDT) Test
- WK89667 - Revision of D8329-21 Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Material Contained Within
- WK89669 - Revision of E1132-21 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica
- WK89671 - Revision of F2461-23 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
- WK89672 - Revision of F2461-23 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
- WK89675 - Revision of F2461-23 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
- WK89676 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK89677 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK89678 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK89682 - Revision of F3256-23 Standard Guide for Reporting and Recording of Near-Misses for Maritime Industry
- WK89686 - Revision of F3559-23 Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices
- WK89688 - Revision of F2959-23a Standard Practice for Aerial Adventure Courses
- WK89689 - Revision of C1365-18 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
- WK89690 - Revision of D482-19 Standard Test Method for Ash from Petroleum Products
- WK89692 - Revision of F1236-23 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
- WK89701 - New Practice for Vacuum Insulated Piping for Cryogenic Applications
- WK89702 - Revision of G11-19 Standard Practice for Effects of Outdoor Weathering on Pipeline Coatings
- WK89703 - Revision of D613-24 Standard Test Method for Cetane Number of Diesel Fuel Oil
- WK89704 - Revision of C1876-23 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- WK89706 - New Practice for Additive Manufacturing -- Fresh and Very Early Age properties of concretes used for Additively Constructed Concrete by Means of Extrusion
- WK89707 - New Practice for Additive Manufacturing -- Construction and Documentation of Additively Constructed Concrete and Mortar Components
- WK89711 - Revision of D1978-91(2018) Standard Guide for Analysis of Electrocoat Bath Samples
- WK89713 - Revision of D7588-11(2018) Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container
- WK89714 - Revision of D7768-12(2018) Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography
- WK89720 - Revision of E2349-19 Standard Practice for Safety Requirements in Metal Casting Operations: Sand Preparation, Molding, and Core Making; Melting and Pouring; and Cleaning and Finishing
- WK89721 - Revision of E2706-18 Standard Practice for Equipment Technology and Operations for Mobile and Plant-Based Secure Destruction Safety Requirements
- WK89722 - Revision of E2875/E2875M-12(2021) Standard Guide for Personal Protective Equipment for the Handling of Flat Glass
- WK89725 - Revision of E2625-19 Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
- WK89732 - Revision of A513/A513M-20a Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
- WK89733 - Revision of D4716/D4716M-22 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
- WK89734 - Revision of D5116-17 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions from Indoor Materials/Products
- WK89736 - New Guide for Benchtop Evaluation of Seal Zone Leakage of Endovascular Prostheses
- WK89743 - New Practice for Rolling Wheel Load Tests to Evaluate the Structural Performance of Roadway Test Sections with Geosynthetics
- WK89749 - Revision of D8120-17 Standard Test Method for Ferrous Debris Quantification
- WK89770 - Revision of D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection
- WK89778 - New Guide for Maintenance of Exoskeletons
- WK89791 - Revision of F3559-23 Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices
- WK89792 - Revision of F3559-23 Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices
- WK89793 - Revision of D3018/D3018M-22 Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
- WK89794 - Revision of D3462/D3462M-23 Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
- WK89795 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK89796 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK89797 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK89803 - Revision of D2216-19 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
- WK89805 - Revision of F2088-22 Standard Consumer Safety Specification for Infant and Cradle Swings
- WK89806 - Revision of D5061-19 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke
- WK89812 - New Guide for Guide for Establishment of a Microbiological Quality Level for Pharmaceutical and Biopharmaceutical Products and Processes
- WK89813 - New Test Methods for Standard Test Method for indentation hardness of steel by Shear Pin
- WK89817 - Revision of D4054-23 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
- WK89818 - Revision of E1300-16 Standard Practice for Determining Load Resistance of Glass in Buildings
- WK89825 - Withdrawal of E2726/E2726M-12a(2017) Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
- WK89829 - Revision of D5029-98(2020) Standard Test Method for Water Solubles in Activated Carbon
- WK89832 - Revision of E2790-20 Standard Guide for Identifying and Complying With Continuing Obligations
- WK89836 - Revision of D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography
- WK89841 - Reinstatement of D3865-09(2015) Standard Test Method for Plutonium in Water (Withdrawn 2024)
- WK89842 - Reinstatement of D3972-09(2015) Standard Test Method for Isotopic Uranium in Water by Radiochemistry (Withdrawn 2024)
- WK89843 - Reinstatement of D7939-15 Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water (Withdrawn 2024)
- WK89845 - Revision of E345-24 Standard Test Methods of Tension Testing of Metallic Foil
- WK89849 - Revision of E345-24 Standard Test Methods of Tension Testing of Metallic Foil
- WK89858 - Revision of E18-22 Standard Test Methods for Rockwell Hardness of Metallic Materials
- WK89859 - Revision of E18-22 Standard Test Methods for Rockwell Hardness of Metallic Materials
- WK89860 - Revision of E3096-18 Standard Guide for Definition, Selection, and Organization of Key Performance Indicators for Environmental Aspects of Manufacturing Processes
- WK89862 - Revision of D5971/D5971M-16 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
- WK89863 - New Test Method for Additive Manufacturing -- Segmenting pores in X-ray computed tomography data of additively manufactured samples
- WK89867 - Revision of D7820-19 Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
- WK89869 - Revision of F2759-19 Standard Guide for Assessment of the Ultra-High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
- WK89870 - Revision of F2263-14(2019) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
- WK89872 - Revision of F1506-22 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK89873 - Revision of F2096-11(2019) Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
- WK89874 - New Specification for Additive manufacturing -- Qualification principles -- Part 1: Common failure modes used for risk mapping
- WK89875 - Revision of C928/C928M-20a Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
- WK89881 - Revision of D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt
- WK89884 - New Terminology for Language Services and Products
- WK89890 - Revision of C1232-23 Standard Terminology for Masonry
- WK89891 - Revision of C97/C97M-18 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
- WK89892 - Revision of C99/C99M-18 Standard Test Method for Modulus of Rupture of Dimension Stone
- WK89893 - Reinstatement of D5287-08(2015) Standard Practice for Automatic Sampling of Gaseous Fuels (Withdrawn 2024)
- WK89896 - Revision of A941-23 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK89897 - New Specification for Indirect Control Systems for Primary-axis Controls
- WK89898 - Revision of C595/C595M-23 Standard Specification for Blended Hydraulic Cements
- WK89902 - Revision of D1079-20 Standard Terminology Relating to Roofing and Waterproofing
- WK89907 - Revision of C125-21a Standard Terminology Relating to Concrete and Concrete Aggregates
- WK89928 - Revision of D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
- WK89930 - New Guide for Blockchain-Based Verification of Certification of Authentication (COA) Documents for Deforestation Document Tracking in the Supply Chains
- WK89933 - Revision of D8034/D8034M-17 Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants
- WK89942 - New Guide for Image Comparison Opinions
- WK89945 - New Specification for Additive Manufacturing -- Data -- Common Data Exchange Format for Laser Blown Powder Directed Energy Deposition (DED)
- WK89946 - Revision of F1163-23 Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
- WK89947 - Revision of E2535-07(2018) Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings
- WK89948 - Revision of D5883-18 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
- WK89949 - New Guide for Analysis of Residual Solvents in Liquid Samples Containing Terpenes by a Heat Sensitive Method Using Head-Space Gas Chromatography (HS-GC)
- WK89959 - Revision of D720/D720M-23 Standard Test Method for Free-Swelling Index of Coal
- WK89965 - New Test Methods for Determination of Natural Rubber in Plant Tissue by Solvent Extraction
- WK89981 - Revision of A829/A829M-17 Standard Specification for Alloy Structural Steel Plates
- WK89982 - New Test Method for Adhesion of Dry Electrostatically Applied Porcelain Enamel Powder
- WK89983 - New Test Method for Measurement of Fluidity of Porcelain (Vitreous) Enamel Powders
- WK89987 - Revision of D6803-19 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Architectural Coatings Using Small-Scale Environmental Chambers
- WK89988 - Revision of F2440-24 Standard Specification for Impact Attenuation of Wall Padding Used in Indoor Competitive and Recreational Sports Venues
- WK89992 - Revision of E1820-23b Standard Test Method for Measurement of Fracture Toughness
- WK90001 - Revision of E1820-23b Standard Test Method for Measurement of Fracture Toughness
- WK90005 - Revision of D445-23 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- WK90015 - New Practice for Assessment Method for Exoskeletons in Tool Handling: Car Assembly, Construction (drywall and rail systems) and Welding
- WK90016 - Revision of D4753-24 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
- WK90017 - Revision of D7400/D7400M-19 Standard Test Methods for Downhole Seismic Testing
- WK90018 - Revision of D2137-11(2018) Standard Test Methods for Rubber Property—Brittleness Point of Flexible Polymers and Coated Fabrics
- WK90020 - Revision of C926-23a Standard Specification for Application of Portland Cement-Based Plaster
- WK90023 - Revision of D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
- WK90025 - Revision of E2035-12(2024) Standard Terminology Relating to Forensic Psychophysiology
- WK90027 - Revision of F3018-17 Standard Guide for Assessment of Hard-on-Hard Articulation Total Hip Replacement and Hip Resurfacing Arthroplasty Devices
- WK90029 - New Guide for Air Barriers in Low Slope Roof Systems
- WK90030 - Revision of C94/C94M-24 Standard Specification for Ready-Mixed Concrete
- WK90032 - Revision of C1232-23 Standard Terminology for Masonry
- WK90035 - Revision of A194/A194M-23 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
- WK90044 - Revision of D3410/D3410M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
- WK90045 - Revision of D3518/D3518M-18 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
- WK90049 - New Test Method for Determination of the Electric Tangential Interfacial Surface Discharge of Solid Dielectric Materials in a Liquid
- WK90052 - Revision of F2533-20 Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
- WK90054 - New Guide for Implementing Sustainable Factors into Road and Paving Standards
- WK90055 - Revision of D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy
- WK90056 - Revision of D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)
- WK90057 - Revision of D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
- WK90059 - Revision of D5972-23 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
- WK90060 - Revision of D7153-22ae1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
- WK90068 - Revision of E3327/E3327M-21 Standard Guide for the Qualification and Control of the Assisted Defect Recognition of Digital Radiographic Test Data
- WK90069 - Revision of E92-23 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- WK90073 - New Test Method for Air-Permeability Coefficient of Hardened Concrete by the Double-Chamber Vacuum Cell Method
- WK90077 - Revision of E3027-23 Standard Guide for Making Sustainability-Related Chemical Selection Decisions in the Life-Cycle of Products
- WK90080 - New Practice for Mode I Dominant Fracture Toughness Fatigue Testing of Sandwich Constructions
- WK90086 - New Specification for Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
- WK90088 - Revision of D3740-23 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
- WK90089 - New Test Method for Additive manufacturing of medical devices – Test Method – Relative Density of Porous Structures via Gravimetric Analysis
- WK90090 - Revision of C1305/C1305M-16(2023) Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
- WK90091 - Revision of A350/A350M-24 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- WK90092 - Revision of D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
- WK90095 - Revision of D5199-12(2019) Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
- WK90098 - Revision of E241-20 Standard Guide for Limiting Water-Induced Damage to Buildings
- WK90099 - Revision of E241-20 Standard Guide for Limiting Water-Induced Damage to Buildings
- WK90100 - Revision of E241-20 Standard Guide for Limiting Water-Induced Damage to Buildings
- WK90102 - New Practice for Minimum Criteria for Comparing Materials and Systems During Built Environment Use Stage Life Cycle Assessments (LCA)
- WK90104 - Revision of C1208/C1208M-18(2022) Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
- WK90105 - Revision of C700-18(2022) Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
- WK90106 - Revision of C301-18(2022) Standard Test Methods for Vitrified Clay Pipe
- WK90107 - Revision of C12-22a Standard Practice for Installing Vitrified Clay Pipe Lines
- WK90108 - Revision of E2132-17 Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
- WK90109 - Revision of E1425-14(2023) Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
- WK90111 - New Guide for ASTM D37 Preroll Analysis and Characterization Initiative
- WK90113 - Revision of D346/D346M-11(2019)e1 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis
- WK90114 - Revision of D3860-98(2020) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
- WK90122 - Revision of D7859-19 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers
- WK90123 - New Test Method for Determining the Rate of Capillary "Wicking" within Geosysnthetics
- WK90126 - Revision of C495/C495M-12(2019) Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
- WK90128 - Revision of F1193-23 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK90133 - Revision of D3364-99(2019) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
- WK90143 - Revision of D7877-24 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
- WK90145 - New Test Method for Field Testing of Active Vehicle Barrier System Controls
- WK90146 - New Practice for Standard Practice for Preparing an Environmental and Human Exposure Screening Report (ESR) for Substances Used in the Built Environment
- WK90147 - Revision of D1987-22 Standard Test Method for Biological Clogging of Geotextile, Drainage Geocomposites, or Soil/Geotextile Filters
- WK90153 - Revision of C1019-20 Standard Test Method for Sampling and Testing Grout for Masonry
- WK90154 - Revision of D7618-13(2021) Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
- WK90158 - New Practice for Standard Practice for Training in the Areas of Video Analysis, Image Analysis, and Photography
- WK90159 - Revision of E2656-16 Standard Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
- WK90161 - New Practice for Quality Control of Routine Testing in a Laboratory
- WK90164 - Revision of D7672-24 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
- WK90168 - Revision of E2353-21 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
- WK90169 - Revision of E2358-24 Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
- WK90170 - Revision of F3561-23 Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack
- WK90171 - Revision of F1233-21 Standard Test Method for Security Glazing Materials And Systems
- WK90173 - Revision of A736/A736M-17 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel
- WK90175 - New Test Method for Laminated glass wet applied sealant compatibility
- WK90176 - New Test Method for Assessing the Effect of Back Exoskeletons on Low Back Loading and Risk
- WK90179 - Revision of F1506-22 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK90180 - Revision of D1230-22a Standard Test Method for Flammability of Apparel Textiles
- WK90183 - Revision of F3059-18 Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
- WK90185 - Revision of F3006-20 Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
- WK90187 - Revision of E1996-23 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
- WK90189 - Revision of C1676/C1676M-23 Standard Specification for Microporous Thermal Insulation
- WK90190 - New Guide for Standard Guide for Forensic Photogrammetry
- WK90191 - Revision of D4892-14(2019)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)
- WK90192 - New Guide for A guide on the Hazards of Induced Voltage and Current and the Use of Conductive Clothing for the Workers Protection.
- WK90194 - Revision of F1700-20 Standard Specification for Solid Vinyl Floor Tile
- WK90195 - Revision of D3636-19 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials
- WK90198 - Reinstatement of F3102-15 Standard Guide for Specifying, Measuring, and Managing Impact Attenuation of Synthetic Turf Playing Systems (Withdrawn 2024)
- WK90199 - Revision of E2956-23 Standard Guide for Monitoring the Neutron Exposure of LWR Reactor Pressure Vessels
- WK90200 - Revision of E853-23 Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
- WK90201 - Revision of E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
- WK90203 - Revision of F2374-22 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
- WK90204 - New Terminology for DOT FLOW Initiative Data Elements
- WK90206 - Revision of E1135-19(2024) Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
- WK90207 - Revision of E162-22 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- WK90210 - Revision of E3242-23 Standard Guide for Developing Representative Background Concentrations at Sediment Sites—Data Evaluation and Development Methodologies
- WK90215 - New Practice for Standard Practice for Cleaning Glass and Plastic Labware Used in Organic Analyses
- WK90218 - Revision of E2947-21a Standard Guide for Building Enclosure Commissioning
- WK90219 - Revision of C1676/C1676M-23 Standard Specification for Microporous Thermal Insulation
- WK90227 - New Specification for Compacted Mineral-Insulated, Metal-Sheathed, High Temperature Irradiation Resistant Thermocouples
- WK90228 - New Test Method for Standard Test Method for Grasp-Type Robot End-Effectors: Slip Resistance
- WK90230 - Revision of D3676-18 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
- WK90232 - Revision of E3092-18 Standard Practice for Evaluating Efficacy of Vaporous Decontaminants on Materials Contaminated with Bacillus Spores and Contained Within 0.2µm Filter-Capped Tubes
- WK90233 - Revision of E3178-18 Standard Practice for Evaluating Static and Cidal Chemical Decontaminants against Bacillus Spores using Centrifugal Filtration Tubes
- WK90234 - New Guide for Upfront Document and Cost Review
- WK90235 - Revision of F1387-23 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
- WK90237 - Revision of C1427-21 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
- WK90240 - New Test Method for Culture analysis of Fungi from swab samples
- WK90243 - Revision of F3061/F3061M-23b Standard Specification for Systems and Equipment in Aircraft
- WK90246 - Revision of D3045-18 Standard Practice for Heat Aging of Plastics Without Load
- WK90247 - Revision of D8068-19 Standard Practice for Collection of Culturable Airborne Fungi or Bacteria on Agar Plates by Inertial Impaction Systems
- WK90248 - Revision of D7391-20 Standard Test Method for Categorization and Quantification of Airborne Fungal Structures in an Inertial Impaction Sample by Optical Microscopy
- WK90250 - Revision of D7338-14(2023) Standard Guide for Assessment Of Fungal Growth in Buildings
- WK90254 - Revision of D61-15(2019) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
- WK90258 - Revision of F2968/F2968M-21 Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications
- WK90260 - Revision of D2412-21 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
- WK90261 - Revision of D2665-20 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
- WK90262 - Revision of F3328-18 Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
- WK90265 - Revision of D1896/D1896M-10(2017) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds
- WK90270 - New Guide for Guide for Technical Training for Oxygen Safety
- WK90274 - Revision of D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
- WK90275 - Revision of C1153-23 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
- WK90282 - New Practice for Incubation and Subsequent Evaluation of Geosynthetics to Chlorine Solution at Elevated Temperature Folded Geomembranes
- WK90284 - New Test Method for Evaluating Bactericidal Activity of Non-porous, Semi-porous, and Hydrophobic Antimicrobial Surface Products Used Indoors
- WK90285 - Revision of D4221-18 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
- WK90287 - New Specification for Additive manufacturing -- General Principles -- Framework for the Implementation of a Level System for temporarily self-sufficient systems
- WK90288 - Revision of C1232-23 Standard Terminology for Masonry
- WK90289 - Revision of D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
- WK90293 - New Test Method for Standard Test Method for Determining Tensile Properties of Geostrips
- WK90295 - Revision of E3222-20a Standard Classification for Determination of High-frequency Impact Sound Ratings
- WK90298 - Revision of E162-22 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- WK90300 - New Practice for Multivariate Fit and Accommodation for Exoskeleton Manufacturers and Designers
- WK90301 - Revision of B950-23 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
- WK90305 - Revision of C1232-23 Standard Terminology for Masonry
- WK90312 - Revision of F3372-20 Standard Practice for Butt Fusion Joining of PA12 Pipe and Fittings
- WK90316 - Revision of F2371-16(2024) Standard Test Method for Measuring the Heat Removal Rate of Personal Cooling Systems Using a Sweating Heated Manikin
- WK90318 - New Test Method for Standard Test Method for Evaluating the Risk of Contamination when Aseptically Presenting Product
- WK90326 - New Practice for UAS Ground Control System Human Factors
- WK90327 - Revision of B212-21 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel
- WK90328 - Revision of B213-20 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel
- WK90329 - Revision of B417-22 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel
- WK90331 - Revision of B312-20 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders
- WK90332 - Revision of B331-20 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction
- WK90333 - Revision of B822-20 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering
- WK90339 - Revision of B933-20 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials
- WK90340 - New Guide for Sports Facility Padding
- WK90341 - Revision of B890-20 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry
- WK90345 - Revision of D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- WK90347 - New Practice for Additive Manufacturing -- Curing and Extraction of Sample from Additively Constructed Concrete and Mortar Components
- WK90348 - New Test Method for Additive Manufacturing -- Determination of Hardened Mechanical Properties of Additively Constructed Concrete and Mortar
- WK90353 - Revision of D7877-24 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
- WK90354 - Revision of C183/C183M-23 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
- WK90356 - Revision of C595/C595M-23 Standard Specification for Blended Hydraulic Cements
- WK90357 - Revision of F1760-16(2020) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
- WK90358 - New Test Method for Standard Test Method for Prepreg Tack Using Rolling Resistance
- WK90359 - New Specification for ASTM D37 Vape Device Safety & Testing Initiative Task Group
- WK90363 - New Guide for Plastic Waste Pyrolysis Oil Analyses
- WK90368 - New Test Method for Mode I Dominant Facesheet-to-Core Fracture Toughness of Sandwich Constructions
- WK90370 - Revision of F2084/F2084M-01(2024) Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
- WK90373 - Revision of A832/A832M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
- WK90383 - Revision of D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
- WK90385 - Revision of C920-18 Standard Specification for Elastomeric Joint Sealants
- WK90387 - Revision of D7478/D7478M-11(2017) Standard Specification for Heavy Duty Sheathed Wood Crates
- WK90388 - New Test Method for Standard Test Method for Determination of Microstructural Development of Mortar Cubes using the Bulk Electrical Resistivity Measurements
- WK90389 - Revision of E979-20 Standard Practice for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
- WK90390 - Revision of F3550-22 Standard Guide for Classifying Safety-Related Events
- WK90391 - Revision of D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
- WK90392 - Revision of D8501-23a Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding, Extrusion, Composites, Powder Coating and Additive Manufacturing
- WK90393 - Revision of D4226-19e1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
- WK90401 - Revision of D7136/D7136M-20 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
- WK90408 - Revision of D883-24 Standard Terminology Relating to Plastics
- WK90409 - Revision of D883-24 Standard Terminology Relating to Plastics
- WK90411 - Revision of D883-24 Standard Terminology Relating to Plastics
- WK90415 - New Specification for Turf Reinforcement Mats (TRMs)
- WK90416 - New Specification for Football Helmet Eyeshield Visors
- WK90417 - Revision of D2513-20 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- WK90418 - Revision of D5228-16(2023) Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
- WK90420 - Revision of C676-04(2019) Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
- WK90422 - Revision of C777-04(2019) Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
- WK90423 - Revision of C1203-04(2019) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
- WK90424 - Revision of C978-04(2019) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
- WK90425 - Reinstatement of D5852-00(2007)e1 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method (Withdrawn 2016)
- WK90427 - Revision of E3160-18 Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles
- WK90441 - Revision of E2217-12(2019) Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
- WK90445 - Revision of F311-08(2020) Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
- WK90446 - Revision of F331-13(2020) Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
- WK90448 - Revision of E2090-12(2020) Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
- WK90451 - Withdrawal of F2247-18 Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
- WK90455 - New Guide for Identifying Tests (and Test Variants) to Study Multiphase Waste Forms
- WK90459 - Revision of C917/C917M-18 Standard Test Method for Evaluation of Variability of Cement from a Single Source Based on Strength
- WK90460 - Revision of E3057-19 Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
- WK90482 - Revision of D4422-19 Standard Test Method for Ash in Analysis of Petroleum Coke
- WK90483 - Revision of B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- WK90484 - Revision of B1003-16(2023) Standard Specification for Seamless Copper Tube for Linesets
- WK90485 - Revision of F803-19 Standard Specification for Eye Protectors for Selected Sports
- WK90486 - Revision of C681-14(2019) Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
- WK90487 - Revision of A848-17 Standard Specification for Low-Carbon Magnetic Iron
- WK90489 - New Practice for Measuring Greenhouse Gas (GHG) Emissions in Use of Buildings
- WK90490 - Revision of E3023-21 Standard Practice for Probability of Detection Analysis for â Versus a Data
- WK90492 - New Test Method for Total Organic Fluorine (TOF) in Solid Matrices by Solvent Extraction followed by Combustion Ion Chromatography (CIC)
- WK90497 - Revision of F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- WK90499 - Revision of C618-23e1 Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- WK90500 - Revision of C618-23e1 Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- WK90504 - Revision of G9-07(2020) Standard Test Method for Water Penetration into Pipeline Coatings
- WK90505 - Revision of F2456-20 Standard Specification for Youth-Resistant Firearms Containers (YRFCs)
- WK90507 - Revision of F2369-20 Standard Safety Specification for Non-Integral Firearm Locking Devices
- WK90516 - Revision of E679-19 Standard Practice for Determination of Odor and Taste Thresholds By a Forced-Choice Ascending Concentration Series Method of Limits
- WK90517 - Revision of E1432-19 Standard Practice for Defining and Calculating Individual and Group Sensory Thresholds from Forced-Choice Data Sets of Intermediate Size
- WK90518 - Revision of C311/C311M-24 Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete
- WK90523 - Revision of D892-23 Standard Test Method for Foaming Characteristics of Lubricating Oils
- WK90526 - Revision of E1817-08(2022) Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
- WK90527 - New Test Method for Nondestructive Detection of Leaks in Packages by Force Decay Method
- WK90529 - New Guide for Zoning Analysis Assessment
- WK90531 - Revision of D6646-03(2022) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
- WK90543 - New Practice for Establishing Lead Analysis Method Reporting Limits
- WK90547 - Revision of D2248-01a(2018) Standard Practice for Detergent Resistance of Organic Finishes
- WK90552 - Revision of F3682-24 Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK90553 - Revision of F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
- WK90555 - Revision of C1567-23 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
- WK90556 - Revision of D2257-20 Standard Test Method for Extractable Matter in Textiles
- WK90557 - Revision of E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
- WK90560 - New Guide for Standard Guide for Irradiation of Inflorescence of Cannabis sativa L. Products
- WK90561 - Revision of C457/C457M-23a Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
- WK90563 - New Practice for Reporting Degradation Results of Weathering Tests on Exposed Specimens
- WK90565 - Revision of E2298-18 Standard Test Method for Instrumented Impact Testing of Metallic Materials
- WK90586 - New Test Methods for Vertebral Body Tether Implant Applications
- WK90590 - Revision of C518-21 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
- WK90593 - Revision of D113/D113M-17(2023)e1 Standard Test Method for Ductility of Asphalt Materials
- WK90594 - New Test Methods for Standard testing methods for external loading of internal replacement pipe (IRP) technologies installed within existing pipelines.
- WK90600 - Reinstatement of D5852-00(2007)e1 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method (Withdrawn 2016)
- WK90601 - Revision of E3318-24 Standard Terminology for Standards Relating to Stormwater Control Measures
- WK90604 - Revision of G35-23 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
- WK90607 - Revision of D3679-24 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
- WK90615 - Revision of E768-99(2018) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
- WK90617 - Revision of A615/A615M-22 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
- WK90618 - Revision of A706/A706M-22a Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
- WK90619 - Revision of A664-15(2022) Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications
- WK90621 - New Specification for Deformed and Plain Steel Bars for Concrete Reinforcement for Lower Temperature Service
- WK90623 - Revision of C989/C989M-24 Standard Specification for Slag Cement for Use in Concrete and Mortars
- WK90624 - Withdrawal of D5878-19 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
- WK90625 - Revision of E132-17 Standard Test Method for Poisson’s Ratio at Room Temperature
- WK90628 - Revision of E143-20 Standard Test Method for Shear Modulus at Room Temperature
- WK90629 - Revision of F1428-23 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
- WK90634 - Revision of E8/E8M-24 Standard Test Methods for Tension Testing of Metallic Materials
- WK90635 - Revision of E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments
- WK90636 - Withdrawal of E882-10(2016)e1 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
- WK90637 - Withdrawal of E2093-12(2016) Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
- WK90644 - Revision of E1137/E1137M-08(2020) Standard Specification for Industrial Platinum Resistance Thermometers
- WK90645 - Revision of E1137/E1137M-08(2020) Standard Specification for Industrial Platinum Resistance Thermometers
- WK90646 - Revision of E467-21 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
- WK90648 - Revision of E879-20 Standard Specification for Thermistor Sensors for General Purpose and Laboratory Temperature Measurements
- WK90649 - Revision of E1834-18 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry
- WK90650 - Revision of E2821-20 Standard Specification for ?Compacted Mineral-Insulated, Metal-Sheathed Cable Used in Industrial Resistance Thermometers
- WK90651 - Revision of A915/A915M-08(2018) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
- WK90653 - Revision of F606/F606M-21 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- WK90654 - Revision of E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- WK90655 - Revision of B1022-22 Standard Specification for Zinc-Aluminum-Magnesium Alloys in Ingot Form for Coating Steel Sheet by the Hot-Dip Process
- WK90657 - Revision of D6519/D6519M-23 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
- WK90658 - Revision of D4452/D4452M-22 Standard Practice for X-Ray Radiography of Soil Samples
- WK90659 - Revision of A263-12(2019) Standard Specification for Stainless Chromium Steel-Clad Plate
- WK90660 - Revision of A264-12(2019) Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
- WK90661 - Revision of A265-12(2019) Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
- WK90662 - Revision of D7566-24a Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK90663 - New Guide for Best Practices For ATMPs
- WK90671 - Revision of D6544-21 Standard Practice for Preparation of Textiles Prior to Ultraviolet (UV) Transmission Testing
- WK90672 - Revision of D4776/D4776M-18 Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
- WK90673 - New Specification for Additive manufacturing for metals - Non-destructive testing and evaluation - Imperfections classification in DED parts
- WK90674 - Revision of E2991/E2991M-17 Standard Test Method for Evaluating Response Robot Mobility: Traverse Gravel Terrain
- WK90675 - Revision of E2443-05(2018)e1 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
- WK90677 - Revision of E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
- WK90678 - Revision of E2813-18 Standard Practice for Building Enclosure Commissioning
- WK90679 - Revision of C1720-21 Standard Test Methods for Determining Liquidus Temperature of Waste Glasses and Simulated Waste Glasses
- WK90682 - Revision of E3132/E3132M-17 Standard Practice for Evaluating Response Robot Logistics: System Configuration
- WK90683 - Revision of E2363-23 Standard Terminology Relating to Manufacturing of Pharmaceutical and Biopharmaceutical Products in the Pharmaceutical and Biopharmaceutical Industry
- WK90686 - Revision of F833-21 Standard Consumer Safety Performance Specification for Carriages and Strollers
- WK90688 - Revision of C755-20 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
- WK90689 - Withdrawal of A982/A982M-10(2020) Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
- WK90691 - Revision of E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
- WK90692 - Revision of F138-19 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
- WK90693 - Revision of F139-19 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
- WK90694 - Revision of F1537-20 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
- WK90701 - Revision of F2118-14(2020) Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
- WK90706 - Revision of A510/A510M-20 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
- WK90710 - Revision of E2975-23 Standard Test Method for Calibration or Calibration Verification of Concentric Cylinder Rotational Viscometers
- WK90723 - Revision of E1300-24 Standard Practice for Determining Load Resistance of Glass in Buildings
- WK90734 - Revision of F1496-13(2019) Standard Test Method for Performance of Convection Ovens
- WK90735 - Revision of F1361-21 Standard Test Method for Performance of Open Vat Fryers
- WK90736 - Revision of F2144-21 Standard Test Method for Performance of Large Open Vat Fryers
- WK90738 - Revision of B881-17 Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
- WK90741 - Withdrawal of E1697-05(2020) Standard Test Method for Unipolar Magnitude Estimation of Sensory Attributes
- WK90743 - Revision of D4439-24 Standard Terminology for Geosynthetics
- WK90744 - Revision of D4439-24 Standard Terminology for Geosynthetics
- WK90745 - New Test Method for Torque Testing of Rolling Element (Ball) Bearings for Aerospace Applications
- WK90747 - Revision of F1426-20 Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
- WK90755 - Revision of A955/A955M-20c Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
- WK90756 - Revision of A1035/A1035M-23a Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
- WK90757 - Revision of A970/A970M-18 Standard Specification for Headed Steel Bars for Concrete Reinforcement
- WK90761 - Revision of C564-20a Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
- WK90769 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK90770 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK90773 - Revision of E2114-23 Standard Terminology for Sustainability
- WK90774 - Withdrawal of A859/A859M-23 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
- WK90775 - Revision of F1984-99(2018) Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials
- WK90776 - Revision of E253-23a Standard Terminology Relating to Sensory Evaluation of Materials and Products
- WK90778 - New Test Method for Test Method to Determine Intrinsic Threshold Stress Intensity Range
- WK90784 - Revision of A574-21 Standard Specification for Alloy Steel Socket-Head Cap Screws
- WK90785 - Revision of A105/A105M-24 Standard Specification for Carbon Steel Forgings for Piping Applications
- WK90795 - Revision of D4685/D4685M-15(2020) Standard Test Method for Pile Fabric Abrasion
- WK90796 - Revision of F510/F510M-20 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
- WK90805 - Revision of D1287-11(2020) Standard Test Method for pH of Engine Coolants and Antirusts
- WK90806 - Revision of D4391-18a Standard Terminology Relating to The Burning Behavior of Textiles
- WK90807 - Revision of A480/A480M-23b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- WK90809 - Revision of F3323-21 Standard Terminology for Exoskeletons and Exosuits
- WK90812 - New Guide for Abrasion Resistance of Nickel-Boron or Nickel-Phosphorus Coatings by a Taber-Type Abraser
- WK90814 - Revision of E2321-03(2019) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
- WK90816 - New Test Method for Test Method for the Analysis of Marine Fuels in a Low Shear Rate and High Temperature Application
- WK90819 - Revision of E1825-21 Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems
- WK90821 - Revision of E1825-21 Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems
- WK90822 - Revision of D8528-24 Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography
- WK90823 - New Guide for Evaluation of aging tanks for continued operation
- WK90827 - Revision of E799-03(2020)e1 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
- WK90828 - Revision of E1260-03(2020) Standard Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
- WK90830 - Revision of A1111-22 Standard Specification for Cast Iron Closet Flanges for Use with Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
- WK90831 - Revision of D5118/D5118M-22 Standard Practice for Fabrication of Fiberboard Shipping Boxes
- WK90833 - Revision of D5639/D5639M-20 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
- WK90834 - Revision of A1055/A1055M-22 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
- WK90837 - Revision of D8006-24 Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations
- WK90842 - Revision of E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- WK90843 - Revision of F1919-14(2019) Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric
- WK90844 - Revision of F2796-19 Standard Specification for Hot Food Holding Tables
- WK90845 - Revision of F2202-02(2020) Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
- WK90847 - Revision of F1217-17(2023) Standard Specification for Cooker, Steam
- WK90848 - Revision of F1841-19e1 Standard Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
- WK90851 - Revision of E617-23 Standard Specification for Laboratory Weights and Precision Mass Standards
- WK90852 - Revision of D6883-17 Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles
- WK90855 - Revision of B23-20 Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)
- WK90856 - Revision of B32-20 Standard Specification for Solder Metal
- WK90858 - Revision of B749-20 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
- WK90859 - Revision of B982-20 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
- WK90860 - Revision of B517-19 Standard Specification for Welded Nickel-Chromium-Iron-Alloy Pipe
- WK90862 - Revision of B719-20 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Bar
- WK90863 - Revision of B723-20 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy Welded Pipe
- WK90864 - Revision of D2434-22 Standard Test Methods for Measurement of Hydraulic Conductivity of Coarse-Grained Soils
- WK90865 - Revision of B865-20 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock
- WK90866 - Revision of B443-19 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy and Nickel-Chromium-Molybdenum-Silicon Alloy Plate, Sheet, and Strip
- WK90867 - Revision of D3385-18 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
- WK90868 - Revision of D4511-11(2020) Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
- WK90870 - Revision of D6391-11(2020) Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
- WK90871 - Revision of D7100-11(2020) Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
- WK90872 - Revision of D7243-11(2020) Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
- WK90873 - Revision of D7503-18 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
- WK90874 - Revision of F3137-15(2022) Standard Specification for Headgear Used in Women’s Lacrosse (excluding Goalkeepers)
- WK90875 - Revision of D7664-10(2018)e1 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
- WK90876 - Revision of D8152-18 Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test
- WK90877 - Revision of B265-20a Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
- WK90878 - Revision of C515-13(2018) Standard Specification for Chemical-Resistant Ceramic Tower Packings
- WK90879 - Revision of B898-20 Standard Specification for Reactive and Refractory Metal Clad Plate
- WK90880 - Revision of B494/B494M-08(2020) Standard Specification for Primary Zirconium
- WK90882 - Revision of B365-12(2019) Standard Specification for Tantalum and Tantalum Alloy Rod and Wire
- WK90883 - Revision of B364-18 Standard Specification for Tantalum and Tantalum Alloy Ingots
- WK90884 - Revision of B393-18 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate
- WK90885 - Revision of B394-18 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes
- WK90887 - Revision of B727-04(2020) Standard Practice for Preparation of Plastics Materials for Electroplating
- WK90888 - Revision of F2063-18 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
- WK90894 - Revision of A1043/A1043M-18 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
- WK90898 - New Test Method for Performance of Panini Presses
- WK90900 - New Guide for Field Measurement of Impact Sound and Vibration Transmission Through Floor-Ceiling Assemblies and Associated Structures When Using Heavy-Hard Impact Objects
- WK90903 - New Classification for Reporting Solids and Insoluble Liquid Contamination of Water and Pharmaceutical Liquids When Analyzed by Digital Imaging Analyzers
- WK90904 - Revision of E3348/E3348M-22 Standard Guide for Body Armor for Non-Law Enforcement First Responders
- WK90905 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK90906 - Reinstatement of D4220/D4220M-14 Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023)
- WK90907 - Reinstatement of D4428/D4428M-14 Standard Test Methods for Crosshole Seismic Testing (Withdrawn 2023)
- WK90908 - Revision of D7736-19a(2023) Standard Test Method for Determination of Acids and Glycol Esters in Glycols
- WK90911 - Revision of E45-18a(2023) Standard Test Methods for Determining the Inclusion Content of Steel
- WK90912 - Revision of B887-24 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides
- WK90918 - New Guide for Facial Image Comparison Documentation
- WK90919 - Revision of E2430/E2430M-19 Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)
- WK90920 - Revision of D1937-23 Standard Test Method for Carbon Black, Pelleted—Mass Strength
- WK90924 - New Guide for Digital Engine Monitoring Systems Personnel Certification
- WK90926 - New Guide for Cardiac Microphysiological Systems
- WK90928 - New Test Method for Measuring micropitting of lubricants using a 3 disk on central roller rolling micropitting rig (MPR)
- WK90929 - Revision of E264-19 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
- WK90933 - Revision of D1140-17 Standard Test Methods for Determining the Amount of Material Finer than 75-µm (No. 200) Sieve in Soils by Washing
- WK90934 - Revision of E2174-20a Standard Practice for On-Site Inspection of Installed Firestop Systems
- WK90937 - New Test Method for Freezing point of aviation fuels
- WK90938 - Revision of B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
- WK90939 - New Test Method for Freezing Point of Aviation Fuels (Automatic Coaxial Optical Fibers Method)
- WK90946 - Revision of D4767-11(2020) Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
- WK90948 - Revision of A941-24 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK90949 - Revision of B700-20 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use
- WK90950 - Revision of C1063-23 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- WK90954 - Revision of D8098-23 Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector
- WK90956 - New Specification for ASTM D37.04 Compressed Gas Quality and Safety Initiative
- WK90957 - Revision of F2800-11(2017) Standard Specification for Recirculating Hood System for Cooking Appliances
- WK90963 - Revision of C1611/C1611M-21 Standard Test Method for Slump Flow of Self-Consolidating Concrete
- WK90964 - New Specification for Self-Adhering, Elastomeric Modified Bituminous Sheets used in Low Slope Roofing
- WK90965 - Revision of E795-23 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
- WK90969 - Revision of E3063-24 Standard Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
- WK90970 - Revision of F2861-20 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
- WK90973 - Revision of A707/A707M-19 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
- WK90976 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK90978 - Revision of D4703-16 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
- WK90979 - Revision of D3641-21 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
- WK90998 - New Specification for Specification for Mineral Fiber Insulation Boards for Building Applications
- WK90999 - Revision of C1610/C1610M-21 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
- WK91000 - Revision of D2244-23 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
- WK91003 - Revision of A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
- WK91004 - Revision of A449-14(2020) Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
- WK91009 - Revision of B678-23 Standard Test Method for Solderability of Metallic-Coated Products
- WK91010 - New Test Method for Test method for evaluating pressure ratings of thermocouples.
- WK91014 - Revision of D4567-19 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method
- WK91015 - Revision of A941-24 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK91016 - Withdrawal of D1607-91(2018)e1 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
- WK91017 - Withdrawal of D3268-91(2018) Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)
- WK91018 - Withdrawal of D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
- WK91019 - New Guide for Construction of Master Curves for Asphalt Binders
- WK91023 - Revision of C309-19 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- WK91025 - Revision of C1029-20 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
- WK91026 - New Test Method for Test Method for Determination of Particle Size Distribution of Lime and Limestone by Laser Light Scattering
- WK91027 - Revision of C1029-20 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
- WK91028 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK91029 - Revision of D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
- WK91030 - Revision of A568/A568M-19a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
- WK91031 - Revision of E1588-20 Standard Practice for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
- WK91034 - Revision of C1574-04(2018) Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
- WK91037 - New Guide for Standard Guide for Certification Requirements for Human Resource-Related Professions Within the Cannabis/Hemp Industries
- WK91038 - Revision of C1383-23 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
- WK91039 - Revision of C1383-23 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
- WK91049 - New Test Method for Measurement of Metals in Gaseous Fuels using Sorbent Tubes
- WK91050 - Revision of D36/D36M-14(2020) Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
- WK91053 - Revision of A240/A240M-24 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- WK91054 - Revision of A240/A240M-24 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
- WK91055 - Revision of A480/A480M-24 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- WK91056 - Revision of A941-24 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK91062 - Revision of F1148-22 Standard Consumer Safety Performance Specification for Home Playground Equipment
- WK91063 - Revision of E1856-13(2021) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
- WK91064 - Revision of F2148-18 Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)
- WK91069 - New Test Method for Recovered Carbon Black - Ash Content
- WK91070 - Revision of E261-16(2021) Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques
- WK91071 - Revision of F1193-24 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK91077 - New Test Methods for Liquid Applied Polymeric Roofing and Waterproofing Membranes that are Directly Exposed to the Weather
- WK91078 - Revision of E1441-19 Standard Guide for Computed Tomography (CT)
- WK91079 - Revision of E1570-19 Standard Practice for Fan Beam Computed Tomographic (CT) Examination
- WK91080 - Revision of D1686-19 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)
- WK91081 - Revision of E1318-09(2024) Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
- WK91082 - Revision of E84-23d Standard Test Method for Surface Burning Characteristics of Building Materials
- WK91083 - Revision of E2231-21 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
- WK91084 - Revision of E985-24 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
- WK91085 - Revision of E2231-21 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
- WK91091 - Reinstatement of E1943-98(2015) Standard Guide for Remediation of Ground Water by Natural Attenuation at Petroleum Release Sites (Withdrawn 2024)
- WK91092 - New Specification for Measurment for Plus Size Girls
- WK91093 - Revision of C172/C172M-17 Standard Practice for Sampling Freshly Mixed Concrete
- WK91095 - Revision of E1065/E1065M-20 Standard Practice for Evaluating Characteristics of Ultrasonic Search Units
- WK91097 - Revision of E481-23 Standard Practice for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
- WK91100 - Revision of E393-19 Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
- WK91101 - Revision of E2191/E2191M-16 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission
- WK91104 - New Guide for Effective Use of Natural and Accelerated Weathering Testing of Sealants
- WK91106 - Revision of C967-20 Standard Specification for Uranium Ore Concentrate
- WK91109 - New Guide for Standard Guide for Flaw Detection using Nonlinear Acoustic Resonance Inspection
- WK91117 - Revision of C94/C94M-24a Standard Specification for Ready-Mixed Concrete
- WK91118 - Revision of F593-22 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
- WK91119 - Revision of F3260-18 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
- WK91122 - Revision of C1567-23 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
- WK91123 - Revision of A641/A641M-19 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
- WK91124 - Revision of A817-12(2017) Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
- WK91129 - Revision of E3376-23 Standard Practice for Calibration and Usage of Germanium Detectors in Radiation Metrology for Reactor Dosimetry
- WK91130 - Revision of E3376-23 Standard Practice for Calibration and Usage of Germanium Detectors in Radiation Metrology for Reactor Dosimetry
- WK91132 - Revision of D8053-18 Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing
- WK91133 - New Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Lime Mixtures
- WK91136 - New Guide for Continuous Improvement for Cannabis and Hemp Operations
- WK91137 - Revision of E264-19 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Nickel
- WK91138 - Revision of E1317-19 Standard Test Method for Flammability of Surface Finishes
- WK91139 - Revision of E1321-18 Standard Test Method for Determining Material Ignition and Flame Spread Properties
- WK91140 - Revision of F2418-23 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
- WK91141 - Revision of E2231-21 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
- WK91142 - Revision of E2231-21 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
- WK91144 - New Guide for Carbon Sequestration using Hemp Source Material
- WK91145 - New Guide for Measuring and Reporting Energy Use in Cannabis Cultivation as it relates to Sustainability
- WK91146 - Revision of D6243/D6243M-20 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
- WK91149 - New Practice for NIST Calibration of Measurement Instruments
- WK91150 - Revision of D2487-17e1 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
- WK91151 - Revision of D2488-17e1 Standard Practice for Description and Identification of Soils (Visual-Manual Procedures)
- WK91152 - Revision of A387/A387M-17a(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
- WK91153 - Revision of F3363-19 Standard Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
- WK91154 - New Specification for the Safety and Quality of Cannabinoids Based on Method of Obtention (Source)
- WK91155 - Revision of D1148-13(2018) Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
- WK91159 - New Practice for Standard Practice for Determining the Bacterial and Fungal Inhibition of a Vapor Releasing Test Substance Under Simulated Field Conditions
- WK91160 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK91161 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK91162 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK91164 - Revision of D2616-19 Standard Test Method for Evaluation of Visual Color Difference With a Gray Scale
- WK91165 - Revision of F3533/F3533M-23 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe
- WK91166 - Revision of C187-23 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
- WK91167 - Revision of D3958-23 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)
- WK91168 - Revision of D6434-12(2018) Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes
- WK91169 - Revision of D7106/D7106M-05(2023) Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
- WK91179 - Revision of E2666-09(2019) Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
- WK91180 - Revision of E2883-13(2019) Standard Guide for Evaluation and Calibration, Continuous Friction Measurement Equipment (CFME)
- WK91185 - Revision of C1157/C1157M-23 Standard Performance Specification for Hydraulic Cement
- WK91188 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK91189 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK91190 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK91191 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK91192 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK91193 - Revision of C270-19ae1 Standard Specification for Mortar for Unit Masonry
- WK91194 - Revision of E2700-20 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays
- WK91195 - New Practice for Standard Practice for Locating, Calibrating and Validating an In-Line Digital Imaging Analyzer for Liquid Hydrocarbons and Solids in Water Streams
- WK91196 - New Test Method for Standard Test Method for Determining Reaction-to-fire Characteristics of Exterior Wall Assemblies with a Re-entrant Corner for Mass Timber Buildings
- WK91201 - Revision of C1232-23 Standard Terminology for Masonry
- WK91202 - Revision of D6060-17 Standard Test Method for Sampling of Process Vents with a Portable Gas Chromatograph
- WK91217 - Revision of C898/C898M-09(2024) Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
- WK91218 - Revision of D4959-24 Standard Test Method for Determination of Water Content of Soil By Direct Heating
- WK91221 - New Test Method for Measurement of Viscosity of a Molten Salt using a Rotational Viscometer
- WK91224 - Revision of E2226-23a Standard Practice for Application of Hose Stream
- WK91225 - Revision of D5748-95(2019) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
- WK91226 - Revision of D256-23e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
- WK91227 - Revision of D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils
- WK91232 - Revision of E2231-21 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
- WK91242 - Revision of C1651-11(2018) Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
- WK91243 - Revision of E831-24 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
- WK91244 - Revision of D7717-11(2021) Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis
- WK91246 - Revision of F1948-20 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
- WK91247 - Revision of F1924-19 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
- WK91248 - Revision of D6362-98(2018) Standard Practice for Certificates of Reference Materials for Water Analysis
- WK91249 - New Test Method for Measurement of Side Straightness of Ceramic Tiles.
- WK91250 - Revision of D2881-19 Standard Classification for Metalworking Fluids and Related Materials
- WK91251 - Revision of D3705-14(2019) Standard Test Method for Misting Properties of Lubricating Fluids
- WK91252 - Revision of D3740-23 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
- WK91253 - New Guide for Non-carbon constituents of recovered carbon black
- WK91254 - Revision of C51-23 Standard Terminology Relating to Lime and Limestone (as Used by the Industry)
- WK91258 - New Specification for Polyester Reinforced Flexible Reinforced Plastic Hoses (FRPH) for Close Fit Interactive Pressure Pipe Rehabilitation
- WK91266 - New Test Method for Ultra Low Oxygen
- WK91267 - New Guide for Accounts Receivable & Collections
- WK91272 - Revision of D3104-14a(2018) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)
- WK91273 - Revision of D3461-18 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)
- WK91275 - Revision of D1142-95(2021) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature
- WK91277 - Revision of B243-23 Standard Terminology of Powder Metallurgy
- WK91283 - Revision of D6377-20 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx?(Expansion Method)
- WK91285 - Withdrawal of D2452-15(2019) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
- WK91288 - Withdrawal of D2453-15(2020)e1 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
- WK91290 - Revision of D7846-21 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites
- WK91295 - Revision of D6855-17(2023) Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode
- WK91296 - Revision of D7315-17(2023) Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
- WK91297 - Revision of D1835-22 Standard Specification for Liquefied Petroleum (LP) Gases
- WK91298 - Revision of D7423-23 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
- WK91299 - Revision of C891-20 Standard Practice for Installation of Underground Precast Concrete Utility Structures
- WK91300 - Revision of C143/C143M-20 Standard Test Method for Slump of Hydraulic-Cement Concrete
- WK91301 - Revision of D8421-24 Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
- WK91303 - Revision of E3367-23 Standard Test Method for Determining the Combustion Behavior of Layered Assemblies using a Cone Calorimeter
- WK91304 - Revision of D6568-00(2018) Standard Guide for Planning, Carrying Out, and Reporting Traceable Chemical Analyses of Water Samples
- WK91311 - Revision of D520-00(2019) Standard Specification for Zinc Dust Pigment
- WK91312 - Revision of D521-02(2019) Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)
- WK91315 - Revision of D7219-19 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites
- WK91317 - New Test Method for Evaluation of Materials for Protection against Steam and Hot Liquids
- WK91319 - Revision of D8093-19 Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite
- WK91321 - Revision of C781-20 Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components
- WK91326 - Revision of C783-85(2020) Standard Practice for Core Sampling of Graphite Electrodes
- WK91327 - Revision of E587-15(2020) Standard Practice for Ultrasonic Angle-Beam Contact Testing
- WK91328 - Revision of D3218-07(2018) Standard Specification for Polyolefin Monofilaments
- WK91330 - New Guide for High Energy Focal Spot Guide Development
- WK91331 - Revision of D7224-23 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
- WK91332 - Revision of D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK91333 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK91336 - Revision of A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
- WK91338 - New Guide for Guide for Selection and Use of Air Barriers in Membrane Roof Systems.
- WK91344 - New Test Method for Response of Soil Under Static Loading by Shallow Foundations
- WK91347 - Revision of D7989-21 Standard Practice for Demonstrating Equivalent In-Plane Lateral Seismic Performance to Wood-Frame Shear Walls Sheathed with Wood Structural Panels
- WK91348 - Revision of D7015/D7015M-18 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
- WK91351 - Revision of D94-07(2017) Standard Test Methods for Saponification Number of Petroleum Products
- WK91354 - Revision of D3080/D3080M-23 Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
- WK91356 - Revision of D2105-01(2019) Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
- WK91359 - Revision of D7687-23 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration
- WK91364 - New Guide for Development of Test Methods for the Counting and Sizing of Particulate Matter on the Surfaces of Single-Use Bioprocessing Equipment
- WK91379 - Revision of D5431-08(2019) Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use
- WK91391 - Revision of C1329/C1329M-23 Standard Specification for Mortar Cement
- WK91392 - Revision of D975-24 Standard Specification for Diesel Fuel
- WK91393 - Revision of E1817-08(2022) Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)
- WK91394 - Revision of G211-14(2020) Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
- WK91395 - Revision of E494-20 Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method
- WK91396 - Revision of D6795-19ae1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30?min) Heating Time
- WK91397 - Revision of D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6?h) Heating Time
- WK91398 - Revision of A788/A788M-23 Standard Specification for Steel Forgings, General Requirements
- WK91399 - New Guide for Contamination Control Strategy Maintenance and RACI
- WK91400 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK91401 - New Test Method for Determining the Performance of Wrapped Chambers for Stormwater Treatment
- WK91402 - Revision of E1672-12(2020) Standard Guide for Computed Tomography (CT) System Selection
- WK91403 - Revision of D5182-19 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
- WK91406 - New Specification for Data Integrity of Digital Records within the Quality Management, Production, and Retail environments of Legal Cannabis & Hemp Markets
- WK91407 - Revision of B172-17 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
- WK91409 - Revision of C1433-20e1 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
- WK91411 - Revision of F3180/F3180M-24a Standard Specification for Low-Speed Flight Characteristics of Aircraft
- WK91413 - Revision of D1092-20 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases
- WK91414 - Revision of D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
- WK91416 - Revision of D120-22 Standard Specification for Rubber Insulating Gloves
- WK91417 - New Guide for Diversity, Equity, and Inclusion (DEI) Strategy Development
- WK91418 - New Guide for Diversity, Equity, and Inclusion (DEI) Needs Assessment
- WK91419 - New Guide for Modern Trauma-Informed and Emotionally Literate Workplace
- WK91420 - New Guide for Modern and Effective Hiring Standards
- WK91421 - Revision of D6316-17 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke
- WK91422 - New Guide for Management Conduct and Accountability
- WK91423 - New Guide for Effective, Measurable, and Sustainable Diversity Standards
- WK91424 - New Guide for Fair and Humane Investigations
- WK91425 - Revision of C840-23 Standard Specification for Application and Finishing of Gypsum Board
- WK91434 - Revision of A1112/A1112M-18 Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
- WK91435 - Revision of D7668-23 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method
- WK91436 - New Test Method for Determination of Derived Octane Number of Gasoline or other Fuels—Using a Constant Volume Combustion Chamber Method
- WK91437 - Revision of A178/A178M-19 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
- WK91438 - Revision of A214/A214M-19 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
- WK91439 - Revision of A498/A498M-17(2023) Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
- WK91440 - Revision of A556/A556M-18 Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
- WK91442 - Revision of F1263-11(2019) Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts
- WK91443 - Revision of D4175-23a Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants
- WK91448 - Revision of D2595-22 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range
- WK91450 - Revision of F3239-22a Standard Specification for Aircraft Electric Propulsion Systems
- WK91459 - Revision of D4943-18(2024) Standard Test Method for Shrinkage Factors of Cohesive Soils by the Water Submersion Method
- WK91462 - Revision of D4814-24 Standard Specification for Automotive Spark-Ignition Engine Fuel
- WK91475 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK91476 - Revision of D6773-22 Standard Test Method for Bulk Solids Using Schulze Ring Shear Tester
- WK91478 - Revision of D7901-23 Standard Specification for Dimethyl Ether for Fuel Purposes
- WK91483 - Revision of F2848-21 Standard Specification for Medical-Grade Ultra-High-Molecular-Weight Polyethylene Yarns
- WK91484 - New Practice for Measuring Indented Steel Wire Geometrical Parameters
- WK91485 - Revision of D913-20 Standard Practice for Evaluating Degree of Pavement Marking Line Wear
- WK91487 - Revision of A416/A416M-24 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
- WK91488 - Revision of D8160-20 Standard Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials
- WK91489 - Revision of D8162-20a Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
- WK91490 - Revision of D1155-10(2020) Standard Test Method for Roundness of Glass Spheres
- WK91491 - Revision of D2205-20 Standard Guide for Selection of Tests for Traffic Paints
- WK91492 - Revision of D4960-20 Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials
- WK91493 - Revision of D7971-20 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer
- WK91494 - Revision of D8008-20 Standard Practice for Representative Field Sampling of Traffic Paints
- WK91498 - New Guide for Characterization of Flexible DDA's
- WK91499 - Revision of E705-18 Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
- WK91504 - Revision of A970/A970M-18 Standard Specification for Headed Steel Bars for Concrete Reinforcement
- WK91507 - Revision of F2033-20 Standard Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
- WK91508 - Revision of D3231-24 Standard Test Method for Phosphorus in Gasoline
- WK91509 - Revision of F3115/F3115M-23 Standard Specification for Structural Durability for Small Aeroplanes
- WK91511 - Revision of D7096-19 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
- WK91513 - Revision of D4643-17 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
- WK91516 - Revision of D7945-23 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
- WK91517 - Revision of D5470-17 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials
- WK91518 - Revision of D445-24 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- WK91519 - Revision of D445-24 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
- WK91522 - Revision of E3063-24 Standard Test Method for Antimony Content Using Neutron Activation Analysis (NAA)
- WK91529 - Revision of F688-19 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
- WK91533 - Revision of F1789-23 Standard Terminology for F16 Mechanical Fasteners
- WK91534 - Revision of E543-21 Standard Specification for Agencies Performing Nondestructive Testing
- WK91537 - Revision of C204-24 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
- WK91538 - Revision of C204-24 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
- WK91541 - Revision of D8090-24 Standard Test Method for Particle Size Distribution of Paints and Pigments Using Dynamic Imaging Methods
- WK91542 - Revision of A732/A732M-20 Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
- WK91544 - Revision of D1452/D1452M-24 Standard Practice for Soil Exploration and Sampling by Auger Borings
- WK91548 - New Test Method for The Evaluation of the Volatility of Fluids Utilized with Engines or Applications Performing at Temperatures Below 175 °C.
- WK91553 - Revision of D1322-24 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel
- WK91555 - Revision of B580-79(2019) Standard Specification for Anodic Oxide Coatings on Aluminum
- WK91563 - Revision of E112-24 Standard Test Methods for Determining Average Grain Size
- WK91564 - Revision of B652/B652M-10(2018) Standard Specification for Niobium-Hafnium Alloy Ingots
- WK91565 - Revision of B654/B654M-10(2018) Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate
- WK91566 - Revision of B655/B655M-10(2018) Standard Specification for Niobium-Hafnium Alloy Bar and Wire
- WK91567 - Reinstatement of D3762-03(2010) Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test) (Withdrawn 2019)
- WK91568 - Revision of E1139/E1139M-17 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries
- WK91570 - New Guide for Measurement of Coefficient of Friction Differences between Oils and Related Fluids in Laboratory Tribotests
- WK91571 - Revision of B1026-24 Standard Test Method for Measurement of Thickness of Chromium and Chromium Alloy Deposits by the Coulometric/White Light Interferometry
- WK91572 - Revision of F1913-19 Standard Specification for Vinyl Sheet Floor Covering Without Backing
- WK91577 - Revision of D7978-14(2019) Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method
- WK91580 - Revision of F1427-21e1 Standard Consumer Safety Specification for Bunk Beds
- WK91581 - Revision of E2306-18 Standard Guide for Disposal of Personal Property Assets
- WK91583 - Revision of G168-17 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
- WK91584 - Revision of D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers
- WK91595 - Revision of C1324-20a Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
- WK91596 - Withdrawal of C740/C740M-13(2019) Standard Guide for Evacuated Reflective Insulation In Cryogenic Service
- WK91597 - Withdrawal of C930-19 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
- WK91599 - Withdrawal of C1409-12(2018) Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
- WK91600 - Revision of C1765-24 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- WK91603 - Revision of D3487-24 Standard Specification for Mineral Insulating Liquid Used in Electrical Apparatus
- WK91604 - Revision of A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete
- WK91612 - Revision of F1642/F1642M-17 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
- WK91613 - Revision of F2912-17 Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
- WK91617 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK91618 - Revision of E1419/E1419M-15a(2020) Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission
- WK91619 - Revision of C411-19 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
- WK91620 - Revision of D8233-19 Standard Guide for Packaging and Labeling of Consumer Resin Cannabis Products for Sale to Adult Consumers, Legally Authorized Medical Users, and Caregivers in a Business-to-Consumer Retail Environment (Retailers)
- WK91622 - Revision of F876-24 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
- WK91624 - Revision of G105-20 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
- WK91626 - Revision of C143/C143M-20 Standard Test Method for Slump of Hydraulic-Cement Concrete
- WK91627 - Revision of C173/C173M-24a Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
- WK91628 - Revision of C231/C231M-24 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- WK91642 - Revision of F963-23 Standard Consumer Safety Specification for Toy Safety
- WK91645 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK91650 - New Test Method for the measurement of total bacteria in fuel and fuel associated water using quantitative polymerase chain reaction (qPCR)
- WK91651 - Revision of D6270-20 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
- WK91652 - Revision of C595/C595M-23 Standard Specification for Blended Hydraulic Cements
- WK91653 - New Test Methods for Solar Panel Cleaning Robot
- WK91654 - Revision of D3839-14(2019) Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe
- WK91655 - Revision of D4739-23 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
- WK91657 - Revision of D665-23 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
- WK91659 - Reinstatement of D2113-14 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023)
- WK91661 - Reinstatement of D6151/D6151M-15 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling (Withdrawn 2024)
- WK91662 - Reinstatement of D6635-15 Standard Test Method for Performing the Flat Plate Dilatometer (Withdrawn 2024)
- WK91665 - New Specification for Open-Cell Spray-Applied Polyurethane Thermal Insulation
- WK91666 - New Test Method for New Standard Test Method for Determining the Degree of Disintegration of Items under Defined In-Field Composting Conditions Using Article Dosing
- WK91668 - Reinstatement of D4525-13e2 Standard Test Method for Permeability of Rocks by Flowing Air (Withdrawn 2022)
- WK91669 - Revision of F793/F793M-20 Standard Classification of Wall Coverings by Use Characteristics
- WK91671 - Revision of F1141/F1141M-20 Standard Specification for Wall Coverings
- WK91673 - New Specification for Reverberation Room Requirements
- WK91674 - Revision of D6245-24 Standard Guide on the Relationship of Indoor Carbon Dioxide Concentrations to Indoor Air Quality and Ventilation
- WK91675 - Revision of A999/A999M-23 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
- WK91681 - Revision of C991-23 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
- WK91683 - New Specification for Prevention of Aggregate Reactions in Concrete
- WK91688 - Revision of C1787-23 Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
- WK91692 - Reinstatement of F1854-15 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants (Withdrawn 2024)
- WK91693 - Revision of F2943-14(2019) Standard Guide for Presentation of End User Labeling Information for Musculoskeletal Implants
- WK91706 - Revision of D6097-16 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials
- WK91707 - Revision of C1232-24 Standard Terminology for Masonry
- WK91708 - Withdrawal of C497M-20a With Replacement C497-20e1 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
- WK91710 - Revision of E3051-16 Standard Guide for Specification, Design, Verification, and Application of Single-Use Systems in Pharmaceutical and Biopharmaceutical Manufacturing
- WK91711 - Revision of D7463-21 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
- WK91715 - New Practice for Evaluating Hot Tire Pick-Up of Coatings Applied to Concrete
- WK91716 - Revision of D8169/D8169M-18 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
- WK91717 - Revision of C1232-24 Standard Terminology for Masonry
- WK91718 - Revision of C1232-24 Standard Terminology for Masonry
- WK91719 - Revision of C1232-24 Standard Terminology for Masonry
- WK91720 - Revision of C1232-24 Standard Terminology for Masonry
- WK91722 - Revision of D2936-20 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
- WK91723 - Revision of D882-18 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
- WK91725 - New Specification for Maintenance Manual
- WK91727 - Revision of C1232-24 Standard Terminology for Masonry
- WK91728 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK91729 - Revision of D5/D5M-20 Standard Test Method for Penetration of Bituminous Materials
- WK91731 - Revision of C1723-16(2022) Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
- WK91732 - Revision of D642-20 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
- WK91733 - Revision of C1232-24 Standard Terminology for Masonry
- WK91734 - Revision of F3011-21 Standard Specification for Performance of Angle of Attack System
- WK91735 - New Practice for Standard Practice for Extrusion Welding of Polymeric Geomembranes
- WK91738 - Revision of B841-18 Standard Specification for Electrodeposited Coatings of Zinc Nickel Alloy Deposits
- WK91739 - Revision of E1086-22 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
- WK91741 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK91742 - Revision of F3411-22a Standard Specification for Remote ID and Tracking
- WK91743 - Revision of E220-19 Standard Test Method for Calibration of Thermocouples By Comparison Techniques
- WK91744 - Revision of E647-24 Standard Test Method for Measurement of Fatigue Crack Growth Rates
- WK91745 - Revision of B568-98(2021) Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
- WK91746 - Revision of D8031-16(2024) Standard Test Method for Acid Number of Terephthalic Acid (TA) by Automatic Potentiometric Titration
- WK91747 - Revision of D8063-18 Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
- WK91748 - Revision of D8130-17(2024) Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
- WK91749 - Revision of A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
- WK91750 - Revision of A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
- WK91751 - New Guide for Proposed Standard Guide for Standardization and Classification of ESG Assessments for Commercial Real Estate Transactions
- WK91753 - Revision of F1903-18 Standard Practice for Testing for Cellular Responses to Particles in vitro
- WK91754 - Revision of D7886-14(2019)e1 Standard Practice for Asbestos Exposure Assessments for Repetitive Maintenance and Installation Tasks
- WK91755 - Revision of E1494-18 Standard Practice for Testing Physical Properties of Friable Surfacing Materials
- WK91756 - Revision of D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
- WK91757 - Revision of D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- WK91759 - New Specification for 1OOR UNLEADED AVIATION GASOLINE
- WK91760 - Revision of D910-24 Standard Specification for Leaded Aviation Gasolines
- WK91761 - Revision of D7826-23b Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- WK91762 - Revision of D7826-23b Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- WK91763 - Revision of D7826-23b Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- WK91764 - Revision of D7826-23b Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- WK91765 - Revision of D7826-23b Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- WK91767 - Revision of F1236-23 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
- WK91768 - Revision of B514-05(2019) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe
- WK91775 - Revision of C566-19 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
- WK91776 - Revision of E2713-18 Standard Guide to Forensic Engineering
- WK91779 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK91780 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK91781 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK91782 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK91784 - New Guide for Interstate Transportation of Cannabis Products
- WK91786 - Reinstatement of D1871-04(2014) Standard Test Method for Adhesion Between Tire Bead Wire and Rubber (Withdrawn 2023)
- WK91788 - Reinstatement of D2969-04(2014) Standard Test Methods for Steel Tire Cords (Withdrawn 2023)
- WK91789 - Reinstatement of D4975-14 Standard Test Methods for Single-Filament Tire Bead Wire Made from Steel (Withdrawn 2023)
- WK91791 - Revision of B26/B26M-18e1 Standard Specification for Aluminum-Alloy Sand Castings
- WK91792 - Revision of B85/B85M-18e1 Standard Specification for Aluminum-Alloy Die Castings
- WK91793 - Revision of B108/B108M-19 Standard Specification for Aluminum-Alloy Permanent Mold Castings
- WK91794 - Revision of B618/B618M-18e1 Standard Specification for Aluminum-Alloy Investment Castings
- WK91795 - Revision of B686/B686M-18 Standard Specification for Aluminum Alloy Castings, High-Strength
- WK91796 - Revision of B955/B955M-18 Standard Specification for Aluminum-Alloy Centrifugal Castings
- WK91797 - Revision of B969/B969M-18e1 Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
- WK91813 - New Practice for Maintenance Program for Light Sport Aircraft
- WK91814 - New Guide for for Measuring the Stability of Concentrated Colloidal Dispersions of Nanoparticles Under Gravity Sedimentation Using Static Multiple Light Scattering (SMLS)
- WK91815 - New Practice for Green Grides
- WK91818 - New Specification for Metals Used in the Construction of Heat Conducting Coils Built into Herbal Extract Vaporizer Atomizers
- WK91819 - New Specification for an International Symbol for Identifying Consumer Products Containing Phyto-Cannabinoids
- WK91820 - Revision of F3682-24b Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK91821 - Revision of C1232-24 Standard Terminology for Masonry
- WK91823 - Revision of C1232-24 Standard Terminology for Masonry
- WK91825 - New Practice for Standard Practice for the Thermal Analysis of Structural Properties for Gravity Flow Thermoplastic Pipe at Elevated Temperatures
- WK91827 - Revision of A689-97(2018) Standard Specification for Carbon and Alloy Steel Bars for Springs
- WK91829 - New Specification for Power Limiting and Over-ramp Protection for Interchangeable Vaporizer Devices and Accessories
- WK91830 - New Guide for Social Equity Lending Standard Guidelines
- WK91832 - New Guide for Social Equity Lending Standard Guidelines
- WK91833 - Revision of D4365-19 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst
- WK91834 - Revision of C1126-19 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
- WK91837 - Revision of D5891/D5891M-19 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
- WK91838 - Revision of D5890-19 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
- WK91839 - Revision of C595/C595M-24 Standard Specification for Blended Hydraulic Cements
- WK91841 - Revision of C1714/C1714M-23 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
- WK91843 - Revision of D6228-19 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
- WK91852 - New Test Method for Evaluation of the Cross-Grain Compression Strength and Stiffness of Wood and Wood-Based Materials
- WK91853 - New Classification for Mitigation of Interference in Wireless Communication Systems
- WK91854 - New Guide for Obtaining an Interpolated Numeric Classification by the Monti Carlo method
- WK91856 - Revision of C1708/C1708M-23 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
- WK9186 - New Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program
- WK91861 - Revision of C1670/C1670M-24 Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
- WK91863 - Revision of C1877-24 Standard Specification for Adhered Concrete Masonry Units
- WK91865 - Revision of C1780-24 Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
- WK91868 - Revision of C1291-18 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
- WK91869 - Revision of F406-22 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- WK91870 - Revision of F2194-22e1 Standard Consumer Safety Specification for Bassinets and Cradles
- WK91872 - Revision of C144-18 Standard Specification for Aggregate for Masonry Mortar
- WK91873 - Revision of C144-18 Standard Specification for Aggregate for Masonry Mortar
- WK91874 - Revision of E3157-23 Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems
- WK91875 - Revision of C33/C33M-23 Standard Specification for Concrete Aggregates
- WK91886 - Revision of F765-93(2022) Standard Specification for Wildcats, Ship Anchor Chain
- WK91896 - Revision of C764-19 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
- WK91897 - Revision of F2119-24 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
- WK91900 - Withdrawal of D4469-17 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures
- WK91902 - Revision of C1933/C1933M-24 Standard Test Methods for Floor Patching and Skim Coating Compounds Containing Hydraulic Cements
- WK91903 - Revision of D7032-21 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite and Plastic Lumber Deck Boards, Stair Treads, Guards, and Handrails
- WK91905 - New Guide for Total Measurement Uncertainty Estimation and Reporting for Nondestructive Assay Measurements
- WK91911 - Revision of E1341-16(2020) Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
- WK91912 - Revision of F3313-20 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
- WK91913 - Revision of C595/C595M-24 Standard Specification for Blended Hydraulic Cements
- WK91914 - Revision of C309-19 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
- WK91915 - Revision of C1315-19 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
- WK91916 - Revision of C1313/C1313M-13(2019) Standard Specification for Sheet Radiant Barriers for Building Construction Applications
- WK91917 - New Guide for Standard Guide for Melting Copper Granules (Choppings) to Cast a Test Block for Chemical Analysis and Copper Content Determination.
- WK91919 - Revision of F2788/F2788M-21 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
- WK91920 - New Specification for Heterogenous Polyolefin Tile or Plank Resilient Flooring for Direct Glue Down Applications
- WK91921 - Revision of F3084-24 Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
- WK91922 - New Specification for Heterogenous Polyolefin Tile or Plank Resilient Flooring for Floating Profile Applications
- WK91923 - Revision of F2933-21a Standard Consumer Safety Specification for Crib Mattresses
- WK91924 - Revision of C1322-15(2019) Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
- WK91925 - Revision of A450/A450M-23 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
- WK91926 - Revision of A450/A450M-23 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
- WK91928 - Revision of C796/C796M-19 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
- WK91944 - Revision of F1281-24 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
- WK91947 - Reinstatement of D2563-08(2015) Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts (Withdrawn 2024)
- WK91948 - New Guide for Gymnasium Divider Curtains and Indoor Operable Practice Cages
- WK91949 - Revision of D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids
- WK91950 - Revision of C1393-19 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
- WK91951 - Revision of C780-23 Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
- WK91952 - Revision of C780-23 Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
- WK91953 - Revision of C780-23 Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
- WK91955 - Revision of F3664-24 Standard Practice for Blast Testing
- WK91956 - New Guide for Specifying Noise Barriers
- WK91958 - Revision of E136-24b Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
- WK91963 - Revision of D8331/D8331M-20 Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
- WK91964 - Revision of D6496/D6496M-23a Standard Test Method for Determining Average Bonding Peel Strength Between Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
- WK91965 - Revision of C1749-17a Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
- WK91966 - Revision of D7539-10(2020) Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
- WK91967 - Revision of E3330-22 Standard Guide for Contents of Documentation and Statistical Treatments for Reference Materials for Metals, Ores, and Related Materials
- WK91969 - Revision of C156-20 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
- WK91970 - New Specification for In-line Self-Calibrating Thermocouples
- WK91971 - Revision of D3666-24 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK91974 - Revision of D3985-24 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
- WK91975 - Revision of E2972-15(2019) Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials
- WK91978 - Revision of D3016-97(2018) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
- WK91980 - Withdrawal of D3016-97(2018) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
- WK91981 - Revision of D1945-14(2019) Standard Test Method for Analysis of Natural Gas by Gas Chromatography
- WK91982 - Revision of A519/A519M-24 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
- WK91984 - New Practice for Conducting a 5-year Review of G03 Standards
- WK91986 - Revision of F2929-17(2021) Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
- WK91987 - Revision of F3253-24 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
- WK91992 - Revision of C11-24 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- WK91993 - New Specification for Surface/Heat Flux Measurements
- WK91994 - New Specification for Fiber Optic Temperature Measurement
- WK91995 - New Guide for Automated Calibration Software for Thermocouples and RTDs
- WK91996 - Reinstatement of D2717-95(2009) Standard Test Method for Thermal Conductivity of Liquids (Withdrawn 2018)
- WK91997 - Revision of D1165-23 Standard Nomenclature of Commercial Hardwoods and Softwoods
- WK91998 - Revision of D2239-22 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
- WK92000 - Revision of C67/C67M-23a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
- WK92002 - Revision of C1088-23 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
- WK92003 - Revision of C1088-23 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
- WK92004 - Revision of C423-23e1 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
- WK92005 - Revision of E1942-98(2018)e1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
- WK92011 - Revision of D7153-22ae1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
- WK92013 - Revision of E2798-19 Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application
- WK92014 - Withdrawal of F1136/F1136M-11(2019) With Replacement F3393-24 Standard Specification for Zinc-Flake Coating Systems for Fasteners
- WK92015 - Withdrawal of F2833-11(2017) With Replacement F3393-24 Standard Specification for Zinc-Flake Coating Systems for Fasteners
- WK92016 - Withdrawal of F3019/F3019M-19 With Replacement F3393-24 Standard Specification for Zinc-Flake Coating Systems for Fasteners
- WK92019 - Revision of D6747-21 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes
- WK92020 - New Guide for Raw Material electronic Goods Receipt and Release (eGRR) Data Transfer from Materials Suppliers to Pharmaceutical & Biopharmaceutical Manufactures
- WK92024 - Revision of B637-23 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
- WK92028 - Revision of E2848-13(2023) Standard Test Method for Reporting Photovoltaic Non-Concentrator System Performance
- WK92030 - Revision of D3652/D3652M-01(2020) Standard Test Method for Thickness of Pressure-Sensitive Tapes
- WK92031 - New Guide for the Goods Movement Process Codes
- WK92035 - Revision of D2014/D2014M-20 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven
- WK92036 - New Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems.
- WK92037 - Revision of C188-17(2023) Standard Test Method for Density of Hydraulic Cement
- WK92038 - Revision of C188-17(2023) Standard Test Method for Density of Hydraulic Cement
- WK92041 - Revision of C430-24 Standard Test Method for Fineness of Hydraulic Cement by the 45-µm (No. 325) Sieve
- WK92042 - Revision of C786/C786M-24 Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-µm (No. 50), 150-µm (No. 100), and 75-µm (No. 200) Sieves by Wet Methods
- WK92043 - Revision of C1891-20 Standard Test Method for Fineness of Hydraulic Cement by Air Jet Sieving at 45-µm (No. 325)
- WK92044 - Revision of C1846/C1846M-19(2024) Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- WK92045 - Revision of D3121-17 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
- WK92049 - Revision of F1671/F1671M-22 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Blood-Borne Pathogens Using Phi-X174 Bacteriophage Penetration as a Test System
- WK92050 - Revision of F3409-19e1 Standard Practice for Simplified Aircraft Loads Determination
- WK92051 - Revision of F1506-22 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs
- WK92052 - Revision of D293/D293M-18 Standard Test Method for the Sieve Analysis of Coke
- WK92055 - Revision of C1876-24 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- WK92056 - Revision of C1876-24 Standard Test Method for Bulk Electrical Resistivity or Bulk Conductivity of Concrete
- WK92058 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92059 - New Classification for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface for Terrestrial Photovoltaic Applications
- WK92061 - Revision of D6698-24 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water
- WK92062 - Revision of B888/B888M-24 Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts
- WK92071 - Revision of A924/A924M-22a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- WK92072 - Revision of E92-23 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- WK92073 - Revision of E6-23a Standard Terminology Relating to Methods of Mechanical Testing
- WK92074 - Revision of A587-22 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
- WK92076 - New Test Method for Determination of Lead in New Paint Samples through the Standardization of XRF via Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
- WK92077 - New Test Method for Measurement of Heavy-Soft Impact Sound Transmission
- WK92078 - Revision of E3248-20 Standard Guide for NAPL Mobility and Migration in Sediment –?Conceptual Models for Emplacement and Advection
- WK92080 - Revision of F770-24 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- WK92081 - Revision of E336-23 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
- WK92083 - New Classification for Classification method to determine a habit of amphiboles based on dimensional characteristics in airborne and bulk samples by TEM
- WK92085 - Revision of E3224-19 Standard Guide for Building Energy Performance and Improvement Evaluation in the Assessment of Property Condition
- WK92087 - Revision of C901-18 Standard Specification for Prefabricated Masonry Panels
- WK92089 - New Test Methods for Pull-Through Resistance of a Geotextile Fabric Used as Silt Fence
- WK92090 - Revision of F2389-24a Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
- WK92092 - Revision of D2047-17 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
- WK92094 - Revision of D4103-17 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
- WK92100 - Revision of F2375-09(2017) Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
- WK92102 - Revision of C1242-24 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- WK92103 - Revision of D2583-24 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
- WK92105 - Revision of E1007-21 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
- WK92106 - Revision of E1007-21 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
- WK92107 - Revision of A424/A424M-18 Standard Specification for Steel, Sheet, for Porcelain Enameling
- WK92108 - Revision of D1159-23 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration
- WK92109 - Revision of E136-24c Standard Test Method for Assessing Combustibility of Materials Using a Vertical Tube Furnace at 750?°C
- WK92110 - Revision of D785-23 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
- WK92112 - Revision of C915-79(2018) Standard Specification for Precast Reinforced Concrete Crib Wall Members
- WK92113 - Revision of C1194-24 Standard Test Method for Compressive Strength of Architectural Cast Stone
- WK92115 - New Terminology for Standard Terminology relating to Trace Evidence Analysis
- WK92116 - Revision of F3430-20 Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
- WK92117 - Revision of D8253-21 Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy Method)
- WK92118 - Revision of E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
- WK92120 - Revision of F1417-11A(2019)e1 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
- WK92121 - Revision of E2964-21 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
- WK92122 - Revision of F3143-20 Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Replacement Bearings under Standard Conditions Using a Reciprocal Friction Simulator
- WK92123 - New Test Method for the traction performance of lubricating greases using the mini traction machine
- WK92124 - Reinstatement of D5720-95(2009) Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes (Withdrawn 2018)
- WK92125 - Revision of D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
- WK92128 - Reinstatement of E968-02(2014) Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters (Withdrawn 2023)
- WK92129 - New Test Method for Analysis of Chrome Content (as Cr2O3) in Crust using Atomic Absorption or ICP
- WK92133 - Revision of E3302-23 Standard Guide for PFAS Analytical Methods Selection
- WK92135 - Revision of E411-24 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
- WK92140 - Revision of D8288-19 Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine
- WK92141 - Revision of D7566-24b Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK92142 - Revision of D893-14(2018) Standard Test Method for Insolubles in Used Lubricating Oils
- WK92144 - New Practice for Measuring Mobile Manipulator Performance: Inducing Workpiece Disturbance Impairment
- WK92148 - Revision of D3160-20a Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (a–Methylstyrene)
- WK92155 - New Test Method for Determining the Free Chloride of Magnesium Oxide Panels
- WK92156 - Revision of D7821-12(2018) Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
- WK92157 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK92158 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK92159 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK92168 - Revision of D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
- WK92169 - Revision of D5185-18 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
- WK92170 - Revision of D7876-13(2018) Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants
- WK92171 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92172 - Revision of F3083/F3083M-23a Standard Specification for Emergency Conditions, Occupant Safety and Accommodations
- WK92173 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK92175 - Revision of D613-24 Standard Test Method for Cetane Number of Diesel Fuel Oil
- WK92176 - Revision of A932/A932M-01(2019) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens
- WK92184 - Revision of C1766-15(2019) Standard Specification for Factory-Laminated Gypsum Panel Products
- WK92187 - Revision of D8463/D8463M-23 Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric, Silyl-Terminated Polymer Based Waterproofing Membrane for Use with Separate Wearing Course
- WK92199 - Revision of G177-03(2020) Standard Tables for Reference Solar Ultraviolet Spectral Distributions: Hemispherical on 37° Tilted Surface
- WK92201 - Revision of C1077-24 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- WK92202 - Revision of A1058-19 Standard Test Methods for Mechanical Testing of Steel Products—Metric
- WK92203 - Revision of D7098-21 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
- WK92213 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92215 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92216 - Revision of E598-08(2020) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
- WK92219 - Revision of F412-24 Standard Terminology Relating to Plastic Piping Systems
- WK92222 - Revision of E3408/E3408M-23 Standard Test Method for Evaluating Ground Response Robot Capabilities: Dexterity: Linear Inspection
- WK92223 - Revision of E336-23 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
- WK92226 - Revision of F2933-21a Standard Consumer Safety Specification for Crib Mattresses
- WK92227 - New Specification for Fuel Quantity Indicating Systems (FQIS) for Liquid, Gaseous, and Electrical Energy Sources
- WK92236 - Revision of D8358-21 Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
- WK92237 - New Guide for PAT System Application and Lifecycle Management in Biopharmaceutical Industry
- WK92239 - Revision of F2101-23 Standard Test Method for Evaluating the Bacterial Filtration Efficiency (BFE) of Medical Face Mask Materials, Using a Biological Aerosol of Staphylococcus aureus
- WK92240 - New Test Method for Analysis of dose distribution changes in radiation processing using a continuous variable F-test and p-value
- WK92241 - Revision of C471M-24 Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
- WK92242 - Revision of C195-07(2019) Standard Specification for Mineral Fiber Thermal Insulating Cement
- WK92243 - Revision of C449-07(2019) Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
- WK92246 - Revision of F3681-24 Standard Consumer Safety Specification for Beach Umbrellas and Anchor Devices
- WK92247 - Revision of D7957/D7957M-22 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
- WK92248 - Revision of D7913/D7913M-14(2020) Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
- WK92249 - Revision of C991-23 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
- WK92256 - Revision of C1618-19 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure
- WK92257 - Revision of D7617/D7617M-11(2017) Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
- WK92261 - Revision of C969-19 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
- WK92263 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK92264 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK92265 - Revision of D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- WK92266 - Revision of D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
- WK92269 - Revision of C926-24 Standard Specification for Application of Portland Cement-Based Plaster
- WK92271 - Revision of D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
- WK92277 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK92278 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK92279 - Revision of F1235-18 Standard Consumer Safety Specification for Portable Hook-On Chairs
- WK92283 - New Guide for Use of Artificial Intelligence in Assessing Language Proficiency
- WK92284 - Revision of G137-24 Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
- WK92286 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92287 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92288 - Revision of A1094/A1094M-20 Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
- WK92292 - Revision of D6866-24 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
- WK92293 - Revision of F3337-23 Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil
- WK92294 - Revision of F2823-20 Standard Guide for In-Situ Burning of Oil Spills in Marshes
- WK92295 - Revision of F1279-19 Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
- WK92296 - Revision of F1280-19 Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
- WK92297 - Revision of C844-15(2021) Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
- WK92298 - New Test Method for Measuring the Evaporation Rate of Oils and Petroleum
- WK92300 - New Guide for CERCLA 128(a) Grantee Conformance Assessment
- WK92301 - Revision of E50-24 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials
- WK92302 - Revision of F1776-22 Standard Specification for Eye Protective Devices for Paintball Sports
- WK92303 - Revision of E2377-18 Standard Specification for Shelter, Electrical Equipment, Lightweight
- WK92304 - Revision of E92-23 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- WK92306 - Revision of C1832-23 Standard Test Method for Determination of Uranium Isotopic Composition by Modified Total Evaporation (MTE) Method Using Thermal Ionization Mass Spectrometer
- WK92307 - Revision of D4463/D4463M-19 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts
- WK92308 - Revision of D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals
- WK92309 - Revision of D7964/D7964M-19 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed
- WK92312 - Revision of E728-91(2020) Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
- WK92313 - Revision of C39/C39M-24 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- WK92316 - Revision of F3292-19 Standard Practice for Inspection of Spinal Implants Undergoing Testing
- WK92317 - Revision of F1461-17 Standard Practice for Chemical Protective Clothing Program
- WK92319 - New Guide for Standard guide for the sensory evaluation of products that evoke chemesthetic heat sensations.
- WK92320 - Revision of F2639-18 Standard Practice for Design, Alteration, and Certification of Aircraft Electrical Wiring Systems
- WK92321 - Reinstatement of F2900-11 Standard Guide for Characterization of Hydrogels used in Regenerative Medicine (Withdrawn 2020)
- WK92324 - Revision of C1232-24 Standard Terminology for Masonry
- WK92325 - Revision of A1092-15(2020) Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
- WK92326 - New Test Method for Cylindrical Concrete Manholes by the Negative Air Pressure (Vacuum) Test Post Backfill
- WK92329 - Revision of C1910/C1910M-23 Standard Test Methods for Cements that Require Carbonation Curing
- WK92332 - Revision of F1972-19 Standard Guide for Terminology Relating to Candles and Associated Accessory Items
- WK92334 - Revision of F2978-20 Standards Guide to Optimize Scan Sequences for Clinical Diagnostic Evaluation of Metal-on-Metal Hip Arthroplasty Devices using Magnetic Resonance Imaging
- WK92336 - Revision of D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
- WK92337 - New Test Method for Pavement Deflection Velocity Measurement with a Traffic Speed Deflection Device (TSDD) that uses Laser Doppler Vibrometers
- WK92338 - New Practice for Training a Forensic Glass Practitioner
- WK92339 - Revision of A599/A599M-07(2017) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
- WK92342 - Revision of D1357-95(2019) Standard Practice for Planning the Sampling of the Ambient Atmosphere
- WK92345 - Revision of D8584-24 Standard Guide for Testing of Preformed Thermoplastic Pavement Marking Material in the Laboratory and Installed Preformed Thermoplastic Pavement Markings in the Field
- WK92346 - Reinstatement of F839-15 Standard Specification for Cautionary Labeling of Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use (Withdrawn 2024)
- WK92347 - Revision of D2321-20 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- WK92348 - Revision of E2920-24 Standard Guide for Recording Occupational Injuries and Illnesses
- WK92349 - New Guide for assessing risk of and evaluating effectiveness of controls for serious occupational injuries and fatalities (SIF)
- WK92350 - New Guide for evaluating worker and executive engagement in occupational safety and health management
- WK92351 - Withdrawal of E2625-19 Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities
- WK92356 - Revision of F3293-18 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
- WK92357 - Revision of F3321-19 Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
- WK92358 - Revision of D7225-13(2019)e1 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
- WK92359 - Withdrawal of D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
- WK92360 - Revision of C452-21 Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
- WK92361 - Revision of E3077-17e2 Standard Guide for Raw Material eData Transfer from Material Suppliers to Pharmaceutical & Biopharmaceutical Manufacturers
- WK92362 - Revision of D7387-20 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
- WK92374 - Revision of D7160-16(2023) Standard Practice for Determination of Expiration Dating for Medical Gloves
- WK92376 - Revision of D7161-16(2023) Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions
- WK92379 - Revision of C1878-19 Standard Test Method for Surface Water Resistance of Vapor Retarders for Thermal Insulation
- WK92380 - New Specification for PTFE-impregnated and hydrophobic, dust-free, flexible, needle-felted E-glass, ECR Glass, and high purity SiO2 glass yarn made into an insulation blanket
- WK92381 - Revision of D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
- WK92384 - Revision of D8-22a Standard Terminology Relating to Materials for Roads and Pavements
- WK92385 - Revision of D7444-18a Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
- WK92386 - Revision of D8-22a Standard Terminology Relating to Materials for Roads and Pavements
- WK92387 - Revision of C1936-23 Standard Test Method for Corrosiveness of Mineral-Fiber or Cellulosic-Fiber Insulation by Comparison to Control
- WK92388 - Revision of C1667-15(2023) Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Transmission Properties of Vacuum Insulation Panels
- WK92389 - New Test Method for Determination of Hemicellulose in Biomass by High Performance Liquid Chromatography
- WK92390 - Revision of F876-24 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
- WK92391 - Revision of C1045-19 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
- WK92392 - Revision of E3076-18e1 Standard Practice for Determination of the Slope in the Linear Region of a Test Record
- WK92393 - New Guide for Carbon Monoxide Chemisorption on Supported Platinum on Alumina Catalysts Using Dynamic Flow Method
- WK92394 - New Guide for Carbon Monoxide Chemisorption on Supported Platinum on Alumina Catalysts Using Static Vacuum Method
- WK92395 - New Guide for Acid Site Characterization on Zeolites Using a Dynamic Flow Method
- WK92396 - Revision of C114-24 Standard Test Methods for Chemical Analysis of Hydraulic Cement
- WK92397 - Revision of D2321-20 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- WK92398 - Revision of D6304-20 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration
- WK92399 - Revision of C880/C880M-24 Standard Test Method for Flexural Strength of Dimension Stone
- WK92400 - New Test Method for Standard Test Method for Comparative Hiding of Liquid Coatings using Contrast Ratio
- WK92401 - Revision of C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK92406 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92410 - New Specification for Thermoplastic Rubber Sheet Floor Covering without Backing
- WK92411 - New Guide for A guide for dimensioning an exoskeleton for wear and usage.
- WK92413 - New Guide for Minimum Training of Search and Rescue (SAR) Coordinators
- WK92415 - Revision of C1810/C1810M-23 Standard Guide for Comparing Performance of Concrete-Making Materials Using Mortar Mixtures
- WK92420 - New Test Method for The Evaluation of Fluids to Foam, Aerate and Entrain Air at Elevated Temperatures from High Speed Mechanical Agitation Over a Specified Period of Time
- WK92421 - Revision of D8591-24 Standard Test Method for Determination of Fluorotelomer Alcohols in Test Chamber Air by Thermal Desorption-Gas Chromatography-Triple Quadrupole Tandem Mass Spectrometry (TD-GC-MS/MS)
- WK92422 - New Guide for Carbon Accounting, Emissions Reduction, and Carbon Footprint Measurement in the Lubricant Manufacturing Industry
- WK92423 - Revision of D6890-22 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber
- WK92425 - Revision of C496/C496M-17 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
- WK92426 - Revision of C1768/C1768M-12(2017) Standard Practice for Accelerated Curing of Concrete Cylinders
- WK92428 - Revision of F2078-22 Standard Terminology Relating to Hydrogen Embrittlement Testing
- WK92429 - Revision of A965/A965M-24 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
- WK92430 - Reinstatement of F1633-97(2008) Standard Guide for Techniques in Land Search (Withdrawn 2017)
- WK92431 - Revision of F519-23 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
- WK92433 - New Practice for the Design of Adventure Attractions
- WK92436 - Revision of D4414-95(2020) Standard Practice for Measurement of Wet Film Thickness by Notch Gages
- WK92439 - Revision of D2321-20 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- WK92440 - Revision of D2321-20 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- WK92441 - Withdrawal of D2493/D2493M-16 Standard Practice for Viscosity-Temperature Chart for Asphalt Binders
- WK92442 - Revision of E1159-15(2020)e1 Standard Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
- WK92444 - Revision of F3449-20 Standard Guide for Inclusion of Cyber Risks into Maritime Safety Management Systems in Accordance with IMO Resolution MSC.428(98)?Cyber Risks and Challenges
- WK92445 - Revision of C1214-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
- WK92446 - Revision of E875-20 Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
- WK92447 - Revision of D6392-23 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
- WK92448 - Revision of F1360-24 Standard Specification for Ovens, Microwave, Electric
- WK92449 - Revision of F2092-24 Standard Specification for Convection Oven Gas or Electric
- WK9245 - New Test Method for STM for Determination of Relative Crystallinity of Mordenite Zeolite by X-ray Diffraction
- WK92450 - Revision of F1495-20 Standard Specification for Combination Oven Electric or Gas Fired
- WK92451 - New Practice for Direct Environmental Interface Calibration System (DEICS) for Optical Gas Imaging (OGI) Devices
- WK92452 - Revision of C578-23 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- WK92453 - Revision of F1962-22 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
- WK92454 - Revision of F1962-22 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
- WK92456 - Revision of D8230-19 Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection
- WK92457 - Revision of D6666-20 Standard Guide for Evaluation of Aqueous Polymer Quenchants
- WK92458 - Revision of D5372-20 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
- WK92459 - Revision of A576-23 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
- WK92460 - Revision of D2513-24 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- WK92461 - Revision of E3223/E3223M-20 Standard Guide for Specifying and Testing Field-Constructed Exterior Building Wall System Mockups in New Construction
- WK92462 - Revision of F949-20 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
- WK92463 - Revision of E2099-23 Standard Practice for Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
- WK92464 - New Test Method for Creep Testing for Overhead Electrical Conductors
- WK92465 - Revision of F3499-21 Standard Test Method for Confirming the Docking Performance of A-UGVs
- WK92469 - Revision of F2704-17a Standard Specification for Air-Fed Protective Ensembles
- WK92473 - Reinstatement of C1688/C1688M-14a Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete (Withdrawn 2023)
- WK92476 - Revision of D7669-20 Standard Guide for Practical Lubricant Condition Data Trend Analysis
- WK92477 - Revision of B68/B68M-19 Standard Specification for Seamless Copper Tube, Bright Annealed
- WK92478 - Revision of F1111-08b(2019) Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
- WK92482 - New Guide for Facility Condition Assessments (FCAs)
- WK92483 - Revision of B987/B987M-20 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
- WK92487 - Revision of F2575-23e2 Standard Practice for Language Translation
- WK92489 - Revision of E1677-23 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls
- WK92504 - Revision of D6377-20 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx?(Expansion Method)
- WK92505 - Revision of G110-92(2022)e2 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride?+?Hydrogen Peroxide Solution
- WK92507 - Revision of C871-18(2023) Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
- WK92508 - Withdrawal of D6420-18 Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry
- WK92509 - Revision of E3417-24a Standard Test Method for Determination of Cellulose/Hemicellulose-Derived Glucan and Galactan Content in Solid Corn Biomass Samples
- WK92514 - Revision of D5641/D5641M-16 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
- WK92515 - Revision of E162-24 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- WK92516 - Revision of E162-24 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- WK92517 - Revision of E162-24 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- WK92518 - Revision of E162-24 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
- WK92519 - New Practice for In-Service Monitoring of Hydraulic Fluids
- WK92520 - New Test Method for Condition Monitoring of Glycol in In-Service Petroleum- and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- WK92521 - New Test Method for Condition Monitoring of Ester Breakdown I&II in In-Service Polyol Ester Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
- WK92522 - Revision of D7826-24 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives
- WK92523 - New Test Method for Measuring Dissolved Organic Carbon Concentration and Composition with A-TEEM Optical Spectroscopy
- WK92526 - Revision of C1232-24 Standard Terminology for Masonry
- WK92527 - New Test Method for Kinematic Viscosity, Dynamic Viscosity and Density of Liquids by differential pressure capillary viscometer
- WK92528 - Revision of E3240-20 Standard Guide for Risk-Based Corrective Action for Contaminated Sediment Sites
- WK92529 - Revision of F3232/F3232M-23a Standard Specification for Flight Controls in Small Aircraft
- WK92530 - Revision of E1153-22 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces
- WK92531 - Revision of E3135-18 Standard Practice for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation Against Microorganisms on Carriers with Simulated Soil
- WK92532 - Reinstatement of D7535-09(2015) Standard Test Method for Lead-210 in Water (Withdrawn 2024)
- WK92533 - Revision of D4265-21 Standard Guide for Evaluating Stain Removal Performance in Home Laundering
- WK92534 - Revision of F894-24 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
- WK92536 - Revision of E108-20a Standard Test Methods for Fire Tests of Roof Coverings
- WK92538 - Revision of D6400-23 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
- WK92540 - Revision of C634-22 Standard Terminology Relating to Building and Environmental Acoustics
- WK92541 - Revision of A536-24 Standard Specification for Ductile Iron Castings
- WK92542 - Revision of A962/A962M-24 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- WK92543 - Revision of D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
- WK92544 - Revision of F1646-16 Standard Terminology Relating to Walkway Safety and Footwear
- WK92545 - Revision of F1646-16 Standard Terminology Relating to Walkway Safety and Footwear
- WK92546 - Revision of F894-24 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
- WK92547 - Revision of F3346-24 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe
- WK92548 - Revision of D8291-24 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine
- WK92549 - Revision of D7900-23 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography
- WK92550 - Revision of F2783-20 Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
- WK92554 - Revision of F2783-20 Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
- WK92555 - Revision of F2783-20 Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
- WK92557 - Revision of F2460-19 Standard Practice for Special Requirements for Bumper Boats
- WK92558 - Revision of C595/C595M-24 Standard Specification for Blended Hydraulic Cements
- WK92559 - Withdrawal of D7583-16(2023) Standard Test Method for John Deere Coolant Cavitation Test
- WK92560 - New Practice for Practice for the Use of Remote and Autonomous Vehicles
- WK92562 - New Practice for Standard Practice for Characterization of Fire Properties of Materials Used in Amusement Rides and Devices
- WK92566 - New Test Method for Standard Test Method for Determining Dynamic Angle of Repose using the GranuDrum
- WK92567 - Revision of C1485-19 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
- WK92568 - Revision of A931-18 Standard Test Method for Tension Testing of Wire Ropes and Strand
- WK92570 - Revision of E2535-07(2018) Standard Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings
- WK92571 - Revision of D3942-19 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite
- WK92576 - Revision of D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials
- WK92579 - Revision of D4814-24a Standard Specification for Automotive Spark-Ignition Engine Fuel
- WK92582 - New Test Method for The Measurement of Conductivity in Electric Vehicle (EV) Coolants
- WK92590 - Revision of D7425/D7425M-13(2019) Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
- WK92591 - Revision of A1124/A1124M-24 Standard Specification for Textured Epoxy-Coated Steel Reinforcing Bars
- WK92592 - Revision of C1350M-96(2019) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)
- WK92593 - Revision of D1363-06(2019) Standard Test Method for Permanganate Time of Acetone and Methanol
- WK92594 - Revision of D1209-05(2019) Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)
- WK92595 - Revision of D268-22 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material
- WK92596 - Revision of B673-21 Standard Specification for Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Welded Pipe
- WK92597 - Revision of E3136-18 Standard Guide for Climate Resiliency in Water Resources
- WK92598 - Revision of E3249-21 Standard Guide for Remedial Action Resiliency to Climate Impacts
- WK92599 - New Guide for Using Total Organic Carbon (TOC) Analysis in Cleaning Validation
- WK92600 - Revision of D3120-08(2019) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry
- WK92601 - Revision of C1749-17a Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
- WK92602 - Revision of E2336-20 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
- WK92603 - Revision of D4543-19 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
- WK92604 - Revision of D6705/D6705M-04(2018) Standard Guide for Repair and Recoat of Spray Polyurethane Foam Roofing Systems
- WK92607 - Revision of C1658/C1658M-19e1 Standard Specification for Glass Mat Gypsum Panels
- WK92608 - Revision of D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications
- WK92609 - Revision of E1839-20 Standard Practice for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime
- WK92612 - Revision of D6752/D6752M-23 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
- WK92613 - Revision of F2027-16 Standard Guide for Characterization and Testing of Raw or Starting Materials for Tissue-Engineered Medical Products
- WK92615 - New Test Method for Evaluation of Automotive Engine Oils for Soot-Viscosity Performance in a Cummins ISB Medium Duty Diesel Engine
- WK92616 - Revision of D6857/D6857M-23 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
- WK92617 - Revision of D7370/D7370M-14(2021) Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
- WK92618 - Revision of D7063/D7063M-18 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
- WK92619 - Withdrawal of D4041/D4041M-05(2017) Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers
- WK92623 - Revision of D8549-24 Standard Guide for Testing Cleaning Performance of Hand Dishwashing Detergents
- WK92624 - Revision of F2751-16 Standard Guide for Training of a Land Search and Rescue Team Member
- WK92626 - Revision of F2409-10(2016) Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
- WK92627 - Revision of B247-20 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
- WK92628 - Revision of B247M-20 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
- WK92630 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92631 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92632 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92633 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92634 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92635 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92636 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92637 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92638 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92639 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92640 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92641 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92642 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92643 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92644 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92645 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92646 - Revision of A480/A480M-24 Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- WK92649 - Revision of D2842-19 Standard Test Method for Water Absorption of Rigid Cellular Plastics
- WK92650 - New Guide for Detailed Karst Investigations for Site Development
- WK92652 - Revision of C1778-23 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
- WK92653 - Revision of D7186-14(2021) Standard Practice for Quality Assurance Observation of Roof Construction and Repair
- WK92654 - Revision of D6630/D6630M-16(2022) Standard Guide for Low-Slope Insulated Roof Membrane Assembly Performance
- WK92657 - Revision of C70-20 Standard Test Method for Surface Moisture in Fine Aggregate
- WK92658 - New Guide for Evaluating the Risk of Cleaning Processes Using Process Capability
- WK92659 - New Practice for Performing Swab and Rinse Recovery Studies for Cleaning Validation
- WK92664 - Reinstatement of C1754/C1754M-12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete (Withdrawn 2021)
- WK92665 - Revision of D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
- WK92666 - Revision of D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
- WK92667 - Revision of D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
- WK92668 - Revision of D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
- WK92670 - Reinstatement of F2215-15 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications (Withdrawn 2024)
- WK92674 - Revision of D8274-20a Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer
- WK92676 - Revision of A542/A542M-19 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
- WK92681 - Revision of C1778-23 Standard Guide for Reducing the Risk of Deleterious Alkali-Aggregate Reaction in Concrete
- WK92682 - Revision of F3245-19 Standard Guide for Aircraft Electronics Technician Personnel Certification
- WK92684 - Revision of E511-07(2020) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
- WK92685 - Reinstatement of E907-96(2004) Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013)
- WK92686 - Revision of D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
- WK92687 - Revision of F900-11(2017) Standard Specification for Industrial and Commercial Steel Swing Gates
- WK92689 - Reinstatement of D5720-95(2009) Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes (Withdrawn 2018)
- WK92690 - Revision of D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
- WK92691 - Revision of D6261-14(2022) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
- WK92694 - Revision of E3187/E3187M-19 Standard Specification for Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
- WK92697 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK92698 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK92699 - Revision of E521-23 Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
- WK92700 - Revision of F2929-17(2021) Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
- WK92701 - Revision of F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
- WK92702 - Revision of F2788/F2788M-24 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
- WK92703 - Revision of E727/E727M-08(2020) Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
- WK92704 - Revision of E2955-13(2019) Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces
- WK92706 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK92707 - Revision of F2376-24 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
- WK92708 - Revision of F3133-24 Standard Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Stationary Wave Systems
- WK92711 - Revision of A352/A352M-21 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
- WK92712 - Revision of C1577-20e1 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
- WK92714 - Revision of C1433-24 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
- WK92715 - Revision of C1433M-22 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
- WK92717 - Revision of F144-80(2019) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
- WK92718 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK92719 - Revision of A1074-11(2020) Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
- WK92721 - Revision of A1072/A1072M-11(2020) Standard Specification for Zinc-5?% Aluminum (Hot-Dip) Coatings on Iron and Steel Products
- WK92723 - Revision of A1068-10(2020) Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
- WK92726 - Revision of A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing
- WK92732 - New Specification for Light-Sport Aircraft Means of Compliance for IFR Flight into IMC
- WK92733 - Revision of D1275-24 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
- WK92742 - New Test Method for ASTM/IEC 62885-3 Dual Logo Standard
- WK92743 - New Specification for Additive manufacturing — Environment Health & Safety -- Qualification principles for life cycle assessment of parts produced with AM
- WK92744 - Withdrawal of D2980-17e1 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials
- WK92752 - Revision of C1424-15(2019) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
- WK92753 - Revision of D3906-19 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials
- WK92755 - Revision of D6290-19 Standard Test Method for Color Determination of Plastic Pellets
- WK92756 - Revision of F2974-24a Standard Practice for Auditing Amusement Rides and Devices
- WK92757 - Revision of F2088-24 Standard Consumer Safety Specification for Infant and Cradle Swings
- WK92762 - Withdrawal of D4255/D4255M-20e1 With Replacement D7078/D7078M-20e1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
- WK92763 - New Test Methods for Powerplant Installation Fire Protection and Criteria for Normal Category Aeroplanes
- WK92764 - Revision of D3907/D3907M-19 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- WK92765 - Revision of B746/B746M-24a Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches
- WK92766 - Revision of A761/A761M-24 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- WK92767 - Revision of A1113/A1113M-20e1 Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
- WK92769 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK92770 - Revision of D8484-23 Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
- WK92771 - Revision of D8484-23 Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings
- WK92772 - Revision of E112-24 Standard Test Methods for Determining Average Grain Size
- WK92773 - Revision of E112-24 Standard Test Methods for Determining Average Grain Size
- WK92774 - Revision of E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
- WK92776 - Revision of E1638-22 Standard Terminology Relating to Sieves, Sieving Methods, and Screening Media
- WK92777 - Revision of E2016-22 Standard Specification for Industrial Woven Wire Cloth
- WK92778 - Revision of E2814-22 Standard Specification for Industrial Woven Wire Filter Cloth
- WK92779 - Revision of E3315-21 Standard Specification for Certification of Metallic Materials
- WK92780 - Revision of B9-76(2024) Standard Specification for Bronze Trolley Wire
- WK92781 - Revision of B193-20 Standard Test Method for Resistivity of Electrical Conductor Materials
- WK92782 - Revision of B263/B263M-14(2020) Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors
- WK92783 - Revision of D610-08(2019) Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
- WK92784 - Revision of F3556-24 Standard Specification for Physical Properties of Polyethylene Corrugated Gravity Flow (non-pressure) Pipe and Fittings with Recycled Content
- WK92787 - Revision of A193/A193M-24a Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- WK92788 - Revision of A194/A194M-24 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
- WK92789 - Revision of D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
- WK92790 - Revision of D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
- WK92791 - Revision of D7463-21 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water
- WK92792 - Revision of E77-14(2021) Standard Test Method for Inspection and Verification of Thermometers
- WK92793 - Revision of E1951-14(2019) Standard Guide for Calibrating Reticles and Light Microscope Magnifications
- WK92794 - Revision of C109/C109M-23 Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 50 mm [2 in.] Cube Specimens)
- WK92795 - Revision of E406-19 Standard Practice for Using Controlled Atmospheres in Atomic Emission Spectrometry
- WK92796 - Revision of F2633-19 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
- WK92797 - Revision of A473-24a Standard Specification for Stainless Steel Forgings
- WK92799 - New Guide for Fuel Type and Grade Identification Placards
- WK92800 - New Practice for Designing And Building Tiny Houses And ADUs To Age In Place
- WK92805 - New Practice for Additive manufacturing — Data — Data capturing and structure for PBF-LB/M machine log
- WK92806 - Revision of E2886/E2886M-20 Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement
- WK92807 - Revision of A941-24b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK92808 - Revision of A726-18 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types
- WK92809 - Revision of A976-18 Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application
- WK92811 - Revision of D8256-24a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
- WK92812 - Revision of F3394/F3394M-23 Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions
- WK92813 - Revision of D7136/D7136M-20 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
- WK92814 - Revision of D4439-24a Standard Terminology for Geosynthetics
- WK92817 - Revision of E8/E8M-24 Standard Test Methods for Tension Testing of Metallic Materials
- WK92818 - Withdrawal of A541/A541M-05(2020) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
- WK92821 - Revision of E1917-13(2018) Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry
- WK92822 - Revision of D883-24a Standard Terminology Relating to Plastics
- WK92823 - Revision of D2538-18 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
- WK92824 - Revision of D6865-17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
- WK92825 - Revision of D2241-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
- WK92826 - Revision of D2241-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
- WK92827 - Revision of A987/A987M-19 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
- WK92828 - Revision of C1701/C1701M-17a(2023) Standard Test Method for Infiltration Rate of In Place Pervious Concrete
- WK92830 - New Guide for Social Equity Lending Guide
- WK92831 - Revision of A649/A649M-10(2020) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
- WK92832 - Revision of A961/A961M-24b Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- WK92833 - Revision of A182/A182M-24c Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- WK92839 - Revision of D1204-14(2020) Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
- WK92840 - Revision of A1091/A1091M-24 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
- WK92841 - Revision of A494/A494M-24 Standard Specification for Castings, Nickel and Nickel Alloy
- WK92842 - Revision of A1062-10(2020) Standard Specification for Steel Castings Sampling
- WK92844 - Revision of B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus
- WK92845 - Revision of B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus
- WK92846 - Revision of B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus
- WK92848 - Revision of D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
- WK92853 - Revision of F1973-21 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
- WK92854 - Revision of F2897-23a Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
- WK92855 - Revision of F2004-24 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- WK92856 - Revision of F1290-19 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
- WK92857 - Revision of D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
- WK92858 - Revision of F3565-23 Standard Practice for Electrofusion Joining Polyethylene (PE) Pipe and Fittings for Pressure Pipe Service
- WK92859 - New Test Method for Printability of Bioinks and Material Inks Used in Laminar Flow Extrusion Bioprinting
- WK92860 - Revision of A1032-15(2019) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
- WK92861 - Revision of D1500-24 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
- WK92862 - New Specification for Liquefied Petroleum Gases and Gas Mixtures Intended for Use in Herbal Extraction and Refinement Applications
- WK92863 - Revision of B633-23 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
- WK92864 - Revision of B37-18 Standard Specification for Aluminum for Use in Iron and Steel Manufacture
- WK92865 - Revision of B179-18 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
- WK92866 - Revision of F3333-20 Standard Specification for Chopped Carbon Fiber Reinforced (CFR) Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
- WK92867 - Revision of F3227/F3227M-24 Standard Specification for Environmental Systems in Aircraft
- WK92868 - Revision of A991/A991M-22 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
- WK92870 - Revision of A217/A217M-22 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
- WK92871 - Revision of F2961-24 Standard Test Method for Characterizing Gripping Performance of Gloves Using a Torque Meter
- WK92874 - Revision of A960/A960M-24a Standard Specification for Common Requirements for Wrought Steel Piping Fittings
- WK92875 - Revision of A961/A961M-24b Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- WK92876 - Revision of A962/A962M-24 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- WK92879 - Revision of A758/A758M-24 Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
- WK92880 - Revision of A1014/A1014M-16(2021) Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
- WK92881 - Revision of D229-19e1 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation
- WK92882 - Revision of A1082/A1082M-16(2021) Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
- WK92883 - Withdrawal of D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry
- WK92884 - Revision of D3850-19 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
- WK92885 - Revision of B548-03(2017) Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels
- WK92886 - Revision of E2458-17 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
- WK92887 - Revision of E2770-17 Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins
- WK92888 - Revision of E3095-17(2024) Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
- WK92891 - Revision of A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete
- WK92892 - Revision of A489-18e1 Standard Specification for Carbon Steel Eyebolts
- WK92893 - New Practice for ASTM E20 Promotional Material
- WK92894 - Revision of F3357-19 Standard Guide for Designing Reusable Medical Devices for Cleanability
- WK92896 - Revision of D8587-24 Standard Guide for Determining a Point of Departure (POD) or Assigning a Threshold of Toxicological Concern (TTC), if needed, for Use in a Toxicological Risk Assessment of a Non-Cannabinoid Ingredient Intended for Use in Cannabinoid Products for Vaporization
- WK92897 - Revision of D661-93(2019) Standard Test Method for Evaluating Degree of Cracking of Exterior Paints
- WK92898 - Revision of D5154/D5154M-18 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test
- WK92899 - Revision of D8588-24 Standard Practice for Approach to Calculating the Daily Inhalation Exposure Limit for a Non-cannabinoid Ingredient Intended for use in Cannabinoid Products for Vaporization
- WK92901 - Reinstatement of C269-70 Method of Test for Permanent Linear Change on Firing of Castable Refractories (Withdrawn 1978)
- WK92902 - Revision of D8277-20 Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique
- WK92903 - Revision of D2936-20 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
- WK92911 - Revision of D2126-20 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
- WK92912 - Revision of D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics
- WK92914 - Revision of F2949-18 Standard Specification for Pole Vault Box Collars
- WK92916 - New Terminology for Terminology for D20.96 Review
- WK92917 - Revision of D6423-20a Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends
- WK92918 - Revision of D6299-23a Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- WK92923 - Revision of A370-24a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- WK92924 - Revision of E112-24 Standard Test Methods for Determining Average Grain Size
- WK92925 - Revision of D8515-23 Standard Test Method for Color of Rosin in Solution (Instrumental Determination of Gardner Color)
- WK92926 - Revision of E2823-17 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)
- WK92927 - Revision of F1488-14(2019) Standard Specification for Coextruded Composite Pipe
- WK92928 - Revision of F1488-14(2019) Standard Specification for Coextruded Composite Pipe
- WK92929 - Revision of F3722-24 Standard Practice for Heat Fusion Joining of Polypropylene (PP) Pipe and Fittings
- WK92930 - Revision of F1488-14(2019) Standard Specification for Coextruded Composite Pipe
- WK92935 - Revision of A234/A234M-24 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
- WK92936 - New Practice for Validating End-User Sterilizing Filtration of Pharmaceutical, Biopharmaceutical, and Biological Products
- WK92937 - Revision of F1789-24 Standard Terminology for F16 Mechanical Fasteners
- WK92938 - Revision of D2318-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch
- WK92939 - Revision of D2415-20 Standard Test Method for Ash in Coal Tar and Pitch
- WK92940 - Revision of D2416-20 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)
- WK92941 - Revision of D4312-20 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
- WK92942 - Revision of F3430-20 Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
- WK92943 - Revision of D7280-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
- WK92947 - New Guide for Content and Format of Test Report Summaries for Medical and Surgical Materials and Device Standards
- WK92948 - New Practice for Characterization of Digital Neutron Imaging Detectors
- WK92949 - Revision of G50-20 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
- WK92950 - Revision of E3186-19 Standard Guide for Use and Testing of Dry-Block Temperature Calibrators
- WK92951 - Revision of A144-04(2019) Standard Specification for Ferrotungsten
- WK92952 - Revision of E223-23e1 Standard Test Methods for Analysis of Sulfuric Acid
- WK92953 - New Specification for Children's Step Stools
- WK92954 - New Specification for Structural And Chassis Assemblies And Anchorage For Tiny Houses
- WK92959 - Revision of E2567-16a(2023) Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
- WK92960 - Revision of D8558-24 Standard Guide for Verification of a Certificate of Authentication Used to Track Products through Their Supply Chain by Utilizing Blockchain Technology
- WK92961 - Revision of D7851-17 Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
- WK92963 - Revision of A941-24b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK92964 - Revision of D4914/D4914M-16 Standard Test Methods for Density of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
- WK92966 - Revision of F3444/F3444M-20 Standard Practice for Training Exoskeleton Users
- WK92968 - New Practice for Hydrogel Projectile Launcher Playing Field
- WK92969 - New Practice for Quantitative Inspection for Cast Metal Surfaces
- WK92970 - Revision of E736/E736M-19(2023) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
- WK92971 - Revision of F2922-13(2018) Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers
- WK92972 - Revision of C168-24 Standard Terminology Relating to Thermal Insulation
- WK92973 - New Test Method for Relative Efficiency Test for Grease Lubricated Bearings
- WK92978 - Revision of D2737-22 Standard Specification for Polyethylene (PE) Plastic Tubing
- WK92979 - Revision of D8187-18 Standard Guide for Interpretation of Standard Humidity Cell Test Results
- WK92980 - Revision of E3003-20 Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
- WK92981 - Revision of B820-23 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip
- WK92982 - Revision of E3417-24a Standard Test Method for Determination of Cellulose/Hemicellulose-Derived Glucan and Galactan Content in Solid Corn Biomass Samples
- WK92983 - New Specification for Components used in Expansive Hydraulic Cement Systems
- WK92984 - New Classification for Digital Reference Images for Gray Iron Castings Up to 4 1/2 In. (114 mm) in Thickness
- WK92985 - Revision of D8014-17 Standard Guide for Selection of Membranes Used in Vegetative Roofing Systems
- WK92987 - New Practice for Commonly Referenced Acoustical Calculation Procedures
- WK92989 - Revision of D3265-24a Standard Test Method for Carbon Black—Tint Strength
- WK92990 - Withdrawal of D5526-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
- WK92991 - Revision of C1077-24 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- WK92993 - Revision of F1334-24 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
- WK92995 - Revision of F2115-19 Standard Specification for Motorized Treadmills
- WK92996 - Revision of F2106-18 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
- WK92997 - Revision of F703-18(2022) Standard Specification for Implantable Breast Prostheses
- WK93002 - Revision of D942-23a Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
- WK93003 - Revision of D6122-23 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
- WK93004 - Revision of D6122-23 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems
- WK93007 - Revision of A388/A388M-23 Standard Practice for Ultrasonic Examination of Steel Forgings
- WK93010 - Revision of A388/A388M-23 Standard Practice for Ultrasonic Examination of Steel Forgings
- WK93011 - Revision of A745/A745M-24 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
- WK93012 - New Practice for Determining the Thermal Transmittance of Spandrel Assemblies in Glazed Wall Systems
- WK93013 - Revision of C1728-23 Standard Specification for Flexible Aerogel Insulation
- WK93014 - Revision of A1058-19 Standard Test Methods for Mechanical Testing of Steel Products—Metric
- WK93015 - Revision of D891-24 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
- WK93016 - Revision of D8322-20 Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)
- WK93017 - Revision of C1866/C1866M-22 Standard Specification for Ground-Glass Pozzolan for Use in Concrete
- WK93018 - Revision of C739-24 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
- WK93019 - New Guide for Qualification Testing for Safety-Critical Systems in Space Flight
- WK93020 - New Test Methods for Treestand Safety Rope Systems
- WK93021 - Revision of E1602-03(2017) Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
- WK93022 - Revision of D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
- WK93024 - Revision of F3698-24 Standard Specification for Computer-vision Drowning Detection Systems for Residential Swimming Pools
- WK93025 - Revision of D6709-24 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)
- WK93028 - Revision of C168-24 Standard Terminology Relating to Thermal Insulation
- WK93030 - Revision of A1101-23 Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets
- WK93031 - Revision of D2414-23a Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
- WK93032 - Revision of C1945-24e1 Standard Specification for Raw or Calcined Natural Pozzolan for Use in Concrete
- WK93033 - Revision of E1732-24e1 Standard Terminology Relating to Forensic Science
- WK93034 - Revision of D946/D946M-20 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction
- WK93035 - New Terminology for Sacramental use
- WK93037 - New Terminology for Ceremonial Use
- WK93038 - Revision of F603-12(2020) Standard Specification for High-Purity Dense Aluminum Oxide for Medical Application
- WK93039 - Revision of D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
- WK93040 - New Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Fittings
- WK93041 - Revision of C633-24 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings
- WK93043 - Revision of A961/A961M-24b Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- WK93044 - Revision of B1025-24 Standard Specification for Electrodeposited Nanostructured Zinc-Nickel Coatings
- WK93046 - Revision of F1808-03(2019) Standard Guide for Weight Control Technical Requirements for Surface Ships
- WK93049 - Revision of A792/A792M-23 Standard Specification for Steel Sheet, 55?% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
- WK93050 - Revision of E3181-24 Standard Practice for Determination of the Converted Fraction of Starch and Cellulosic Content From a Fuel Ethanol Production Facility
- WK93051 - Revision of C1280-18(2023) Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing
- WK93052 - Revision of F2441-20 Standard Practice for Labeling of Recreational Camping Tents and Bivouac Sacks
- WK93053 - Revision of F3431-21 Standard Specification for Determining Flammability of Materials for Recreational Camping Tents and Warning Labels for Associated Hazards
- WK93054 - Revision of F3431-21 Standard Specification for Determining Flammability of Materials for Recreational Camping Tents and Warning Labels for Associated Hazards
- WK93055 - Revision of D2112-15(2023) Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel
- WK93056 - Reinstatement of D2433-07 Standard Test Methods for Rubber Thread (Withdrawn 2012)
- WK93058 - Revision of C1936-23 Standard Test Method for Corrosiveness of Mineral-Fiber or Cellulosic-Fiber Insulation by Comparison to Control
- WK93059 - Revision of C1063-23 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- WK93060 - Revision of C1177/C1177M-24 Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
- WK93061 - Revision of F1741-22 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
- WK93063 - Revision of D4485-24 Standard Specification for Performance of Active API Service Category Engine Oils
- WK93064 - New Test Method for Standard Test Method for Evaluation of Diesel Engine Oils in the Ford 6.7L Diesel Engine
- WK93065 - Revision of E3220-20 Standard Guide for Characterization of Graphene Flakes
- WK93066 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK93067 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK93068 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK93070 - Revision of D4982-20 Standard Test Methods for Flammability Potential Screening Analysis of Waste
- WK93071 - Revision of D6201-19a Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
- WK93072 - New Terminology for Diversity, Equity, and Inclusion (DEI) Needs Assessment
- WK93073 - Revision of A941-24b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK93074 - Revision of A941-24b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK93076 - Revision of F683-23a Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
- WK93077 - Revision of C365/C365M-22 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
- WK93078 - Revision of A788/A788M-24a Standard Specification for Steel Forgings, General Requirements
- WK93079 - Revision of F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
- WK93080 - Revision of D4434/D4434M-21 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
- WK93081 - Revision of G197-14(2021) Standard Table for Reference Solar Spectral Distributions: Direct and Diffuse on 20° Tilted and Vertical Surfaces
- WK93082 - Revision of C685/C685M-24 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
- WK93083 - Revision of A941-24b Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK93084 - Revision of D4636-17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
- WK93085 - Revision of D721-17 Standard Test Method for Oil Content of Petroleum Waxes
- WK93086 - Revision of B914-21 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
- WK93087 - Revision of D938-12(2017) Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum
- WK93088 - Revision of D4049-20 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray
- WK93089 - Revision of D6878/D6878M-21 Standard Specification for Thermoplastic Polyolefin-Based Sheet Roofing
- WK93090 - Revision of F2375-09(2017) Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
- WK93091 - Revision of F2051-00(2022) Standard Specification for Implantable Saline-Filled Breast Prostheses
- WK93093 - Revision of E2858-12(2020) Standard Practice for Sales of Personal Property
- WK93094 - Revision of C403/C403M-23 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
- WK93095 - Revision of C403/C403M-23 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
- WK93096 - Revision of E2768-11(2018) Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
- WK93097 - New Test Method for Test Method for Water-Soluble Nitrite in Hardened Concrete
- WK93098 - Revision of C535-16 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- WK93099 - Revision of F3631-24 Standard Test Method for Assessment of Intra-operative Durability of Intervertebral Body Fusion Devices
- WK93101 - Revision of F3198-18 Standard Specification for Light Sport Aircraft Manufacturer’s Continued Operational Safety (COS) Program
- WK93102 - Revision of E3179-18 Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
- WK93103 - Revision of A684/A684M-24 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
- WK93104 - Revision of C94/C94M-24c Standard Specification for Ready-Mixed Concrete
- WK93105 - New Guide for Laboratory Evaluation of Soluble Alkali Silicates
- WK93107 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK93108 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK93109 - Revision of D4739-23 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
- WK93110 - Revision of C94/C94M-24c Standard Specification for Ready-Mixed Concrete
- WK93111 - New Test Method for Test method for measuring the corrosion of metal in CO2-rich phase for CO2 pipeline in CCUS
- WK93115 - Revision of C1218/C1218M-20 Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
- WK93116 - Revision of C1084-19 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
- WK93117 - Revision of C989/C989M-24 Standard Specification for Slag Cement for Use in Concrete and Mortars
- WK93118 - Revision of F1163-23 Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
- WK93119 - Revision of C1697-24 Standard Specification for Blended Supplementary Cementitious Materials
- WK93121 - Revision of C270-24 Standard Specification for Mortar for Unit Masonry
- WK93122 - Revision of D5182-19 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
- WK93123 - Revision of C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK93124 - Revision of C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK93125 - Revision of C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK93126 - Revision of C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK93127 - Revision of C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK93128 - Revision of C31/C31M-24b Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK93129 - Revision of F1743-24 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
- WK93130 - Revision of E1354-24 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
- WK93131 - Revision of E603-23 Standard Guide for Room Fire Experiments
- WK93132 - Revision of F1111-08b(2019) Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
- WK93133 - Revision of F3440-24 Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals
- WK93134 - Revision of D4061-13(2018) Standard Test Method for Retroreflectance of Horizontal Coatings
- WK93135 - Revision of E808-23 Standard Practice for Describing Retroreflection
- WK93136 - Revision of D612-88(2017) Standard Test Method for Carbonizable Substances in Paraffin Wax
- WK93137 - Revision of E1326-20 Standard Guide for Evaluating Non-culture Microbiological Tests
- WK93138 - Revision of E2965-22a Standard Test Method for Determination of Low Levels of Heat Release Rate for Materials and Products Using an Oxygen Consumption Calorimeter
- WK93139 - Revision of C191-21 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
- WK93140 - New Specification for Protective Headgear Used in Equestrian Sports
- WK93142 - Revision of D5236-23 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
- WK93143 - Revision of F606/F606M-24 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
- WK93144 - New Test Method for Solar Reflectance and Thermal Emittance for Roofing Surfaces (J. Arnold/M. Dickinson) [ formerly wk65848 )
- WK93145 - Revision of G203-10(2020) Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
- WK93146 - New Practice for Instructional Content of Treestand Safety Ropes
- WK93147 - Withdrawal of E1591-20 Standard Guide for Obtaining Data for Fire Growth Models
- WK93148 - Revision of E3406-24 Standard Guide for Microspectrophotometry in Forensic Fiber Analysis
- WK93149 - Withdrawal of D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures
- WK93150 - New Terminology for Terminology for the On-Line Analysis of Water
- WK93151 - Revision of G40-22a Standard Terminology Relating to Wear and Erosion
- WK93152 - Revision of D2624-22 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels
- WK93153 - Revision of F3232/F3232M-24 Standard Specification for Flight Controls in Small Aircraft
- WK93154 - Revision of D8466-22 Standard Guide for Recovered Carbon Black—Carbon Black Test Methods for Testing rCB
- WK93155 - New Practice for Pavement Structural Response Measurement using a Traffic Speed Deflection Device (TSDD)
- WK93156 - Revision of D2915-17(2022) Standard Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
- WK93157 - Revision of E176-24a Standard Terminology of Fire Standards
- WK93159 - Revision of C563-20 Standard Guide for Approximation of Optimum SO3 in Hydraulic Cement
- WK93161 - New Test Method for Street Sweeping Impact on Runoff Water Quality
- WK93166 - Revision of D4483-20 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
- WK93167 - Revision of D4821-20 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias
- WK93168 - Revision of C1157/C1157M-23 Standard Performance Specification for Hydraulic Cement
- WK93169 - New Practice for Calculation of Flow-Weighted Event Mean Concentration from Time-paced Samples
- WK93170 - Revision of D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
- WK93172 - Revision of C39/C39M-24 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- WK93173 - Revision of D5926-15(2020) Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
- WK93174 - Revision of E3368/E3368M-24 Standard Specification for Ballistic-Resistant Helmets Worn by U.S. Public Safety Officers
- WK93176 - Reinstatement of E2752-10(2015) Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products (Withdrawn 2024)
- WK93177 - Reinstatement of E2784-10(2015) Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination (Withdrawn 2024)
- WK93178 - Revision of C1036-21 Standard Specification for Flat Glass
- WK93179 - Revision of E2149-20 Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions
- WK93180 - Revision of C1232-24 Standard Terminology for Masonry
- WK93181 - Revision of C1232-24 Standard Terminology for Masonry
- WK93182 - Revision of D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
- WK93184 - New Test Method for Determining the Arc Rating Limit and Arc Ignition Withstand of Rubber Insulating Sleeves
- WK93185 - New Specification for Organic and Hydrocarbon Test Constituents for the Evaluation of Stormwater Treatment Devices
- WK93186 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK93187 - Revision of F1545-15a(2021) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
- WK93188 - Revision of E3347/E3347M-24a Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
- WK93189 - Revision of E2112-23 Standard Practice for Installation of Exterior Windows, Doors and Skylights
- WK93190 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93191 - Revision of G81-97a(2018) Standard Test Method for Jaw Crusher Gouging Abrasion Test
- WK93192 - Revision of C91/C91M-23 Standard Specification for Masonry Cement
- WK93193 - New Specification for Cat Trees
- WK93194 - Revision of E1677-23 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls
- WK93195 - Revision of D8303-20 Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain
- WK93196 - Revision of E2957-17(2024) Standard Test Method for Resistance to Wildfire Penetration of Eaves, Soffits and Other Projections
- WK93197 - Revision of D8491-23 Standard Test Method for Recovered Carbon Black—Rheological Non-Linearity of a Rubber Compound by Fourier Transform Rheology
- WK93198 - New Practice for Evaluation of Suitability of Undissolved Water Detector Pads
- WK93199 - New Specification for Self-Adhering, Plastomeric Modified Bituminous Sheets used in Low Slope Roofing
- WK93200 - Withdrawal of D3521-86(2017) Standard Test Method for Surface Wax Coating On Corrugated Board
- WK93201 - Withdrawal of D2534-88(2017) Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings
- WK93202 - Revision of D1833-87(2017) Standard Test Method for Odor of Petroleum Wax
- WK93203 - Revision of D7085-04(2018) Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)
- WK93204 - Revision of E3377-24 Standard Guide for Environmental, Social, and Governance (ESG) Disclosure Related to Climate and Community
- WK93205 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93206 - Revision of D5147/D5147M-18(2024) Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
- WK93207 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93208 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93209 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93210 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93211 - Revision of D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer
- WK93212 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93213 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93214 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93215 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93216 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93217 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93218 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93219 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93220 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93221 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93222 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93223 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93224 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93225 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93226 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93227 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93228 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93229 - New Terminology for Supply Chain Locations
- WK93230 - Revision of E1007-21 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
- WK93231 - Revision of D6839-21a Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, Benzene, and Toluene in Spark Ignition Engine Fuels by Multidimensional Gas Chromatography
- WK93235 - Revision of D6299-23a Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- WK93236 - Revision of A884/A884M-19e1 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
- WK93238 - Revision of A648-18 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
- WK93239 - Revision of D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- WK93240 - Revision of A710/A710M-19 Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates
- WK93241 - Revision of D3895-19 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
- WK93243 - Revision of D6299-23a Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- WK93244 - Revision of D1890-15(2017) Standard Test Method for Beta Particle Radioactivity of Water
- WK93245 - Revision of D7283-17 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
- WK93246 - Revision of D8027-17 Standard Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes
- WK93247 - Revision of E1725-23 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
- WK93256 - Revision of E2280-21 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
- WK93257 - New Practice for Realtime Thermal and Density Profiles of Production, Transportation, and Installation using Sensor and GPS Technology
- WK93258 - Revision of F2788/F2788M-24 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe
- WK93259 - Revision of D1711-24a Standard Terminology Relating to Electrical Insulation
- WK93260 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK93261 - Revision of D7313-20 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
- WK93263 - Revision of E2749-24a Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
- WK93264 - Revision of D5933-19 Standard Specification for 258-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
- WK93265 - New Guide for the Forensic Analysis of Geological Materials by Scanning Electron Microscopy and Energy Dispersive X-Ray Spectrometry
- WK93266 - New Guide for Capturing Iris Images for Use with Iris Recognition Systems
- WK93267 - Revision of D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- WK93268 - Withdrawal of D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer
- WK93269 - Revision of F861-14a(2019) Standard Specification for Commercial Dishwashing Racks
- WK93270 - Revision of F917-19 Standard Specification for Commercial Food Waste Disposers
- WK93271 - Revision of F953-19 Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
- WK93272 - Revision of F1899-14a(2019) Standard Specification for Food Waste Pulper Without Waterpress Assembly
- WK93273 - Revision of F2643-20 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
- WK93274 - Revision of D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
- WK93275 - Revision of D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
- WK93276 - Revision of D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
- WK93277 - Revision of D4530-15(2020) Standard Test Method for Determination of Carbon Residue (Micro Method)
- WK93279 - New Guide for Cannabinoid Management for Storage/Manufacturing/Distribution
- WK93280 - Revision of E7-22 Standard Terminology Relating to Metallography
- WK93281 - Revision of D4318-17e1 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
- WK93282 - Revision of E2298-24 Standard Test Method for Instrumented Impact Testing of Metallic Materials
- WK93283 - New Test Method for Detection of Anthropogenic Alpha and Beta Radioactivity in Food by Liquid Scintillation and Gas-flow Proportional Counting
- WK93284 - New Classification for Continuous Monitoring and Adaptive Control (CMAC) as a Component of Stormwater Control Measures
- WK93285 - Revision of D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)
- WK93287 - Revision of D7608-18e1 Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
- WK93288 - New Specification for WPPO for Plastic-to-Jet processing
- WK93289 - Revision of D3299-24 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
- WK93290 - Revision of D6530-19 Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
- WK93291 - Revision of D7694/D7694M-18 Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material
- WK93292 - Revision of D5465-16(2020) Standard Practices for Determining Microbial Colony Counts from Waters Analyzed by Plating Methods
- WK93293 - Revision of F1044-05(2017)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- WK93294 - Revision of F1160-14(2017)e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- WK93295 - Revision of D2386-19 Standard Test Method for Freezing Point of Aviation Fuels
- WK93296 - Revision of B241/B241M-22 Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
- WK93297 - Revision of B210/B210M-19a Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
- WK93298 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93299 - Revision of C778-21 Standard Specification for Standard Sand
- WK93300 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK93301 - Revision of D7216-23 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
- WK93302 - Reinstatement of D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration (Withdrawn 2020)
- WK93303 - Revision of D1510-24b Standard Test Method for Carbon Black—Iodine Adsorption Number
- WK93304 - Revision of F2057-23 Standard Safety Specification for Clothing Storage Units
- WK93306 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK93307 - Revision of F1060-18 Standard Test Method for Evaluation of Conductive and Compressive Heat Resistance (CCHR)
- WK93308 - Revision of D6299-23a Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
- WK93309 - Revision of B539-20 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
- WK93310 - Revision of B662/B662M-20 Standard Specification for Silver-Molybdenum Electrical Contact Material
- WK93311 - Revision of B663/B663M-20 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material
- WK93314 - Revision of B794-97(2020) Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
- WK93315 - Revision of B798-95(2020) Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
- WK93317 - Revision of B808-10(2020) Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
- WK93318 - Revision of B826-09(2020) Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
- WK93319 - Revision of B827-05(2020) Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
- WK93320 - Revision of B885-09(2020) Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
- WK93321 - Revision of B896-10(2020) Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
- WK93322 - Revision of F1637-21 Standard Practice for Safe Walking Surfaces
- WK93323 - Revision of A576-23 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
- WK93324 - Revision of D381-22 Standard Test Method for Gum Content in Fuels by Jet Evaporation
- WK93326 - Revision of D6845-22 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area
- WK93327 - Revision of F3182-23 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water
- WK93328 - Withdrawal of F79-69(2019) Standard Specification for Type 101 Sealing Glass
- WK93329 - Withdrawal of F105-72(2019) Standard Specification for Type 58 Borosilicate Sealing Glass
- WK93330 - Revision of C534/C534M-24 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- WK93331 - Revision of D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK93332 - Revision of A503/A503M-15(2020) Standard Specification for Ultrasonic Examination of Forged Crankshafts
- WK93333 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK93334 - Withdrawal of D5579-19e1 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
- WK93335 - Revision of E605/E605M-19(2023) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
- WK93336 - Revision of B904-00(2021) Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding
- WK93337 - Revision of B851-04(2020) Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish
- WK93338 - Revision of D7034-18 Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations
- WK93340 - Revision of D6475-17 Standard Test Method for Measuring Mass per Unit Area of Erosion Control Blankets
- WK93344 - Revision of D8291-24a Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine
- WK93346 - Revision of C567/C567M-19 Standard Test Method for Determining Density of Structural Lightweight Concrete
- WK93350 - Revision of F2007-24 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
- WK93351 - Revision of C567/C567M-19 Standard Test Method for Determining Density of Structural Lightweight Concrete
- WK93352 - Revision of E3268-21 Standard Guide for NAPL Mobility and Migration in Sediment—Sample Collection, Field Screening, and Sample Handling
- WK93353 - Revision of E3281-21a Standard Guide for NAPL Mobility and Migration in Sediments – Screening Process to Categorize Samples for Laboratory NAPL Mobility Testing
- WK93354 - Revision of C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
- WK93358 - Revision of C125-24 Standard Terminology Relating to Concrete and Concrete Aggregates
- WK93359 - Revision of C125-24 Standard Terminology Relating to Concrete and Concrete Aggregates
- WK93360 - Revision of C125-24 Standard Terminology Relating to Concrete and Concrete Aggregates
- WK93361 - Revision of D7109-22e1 Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles
- WK93365 - Revision of D7464-20 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
- WK93366 - Revision of D6974-20 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures
- WK93367 - Revision of E2485/E2485M-13(2018) Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
- WK93368 - Revision of C1697-24 Standard Specification for Blended Supplementary Cementitious Materials
- WK93369 - Revision of C1289-23a Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
- WK93370 - Revision of D8545-23e1 Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N'-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography (HPLC)
- WK93371 - New Test Methods for Forced-Entry-Resistance After Simulated Active Shooter Attack of Glazing for Retrofit
- WK93372 - Revision of C1928/C1928M-24 Standard Test Method for Compressive Strength of Alkali Activated Cementitious Material Mortars (Using 50?mm [2?in.] Cube Specimens)
- WK93373 - Revision of D7039-24 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
- WK93379 - Revision of F760-93(2017) Standard Specification for Food Service Equipment Manuals
- WK93380 - Revision of D2377-14(2019) Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
- WK93381 - Revision of F1897-20 Standard Specification for Leg Protection for Chain Saw Users
- WK93382 - Revision of F1637-21 Standard Practice for Safe Walking Surfaces
- WK93383 - Revision of B168-19e1 Standard Specification for Nickel-Chromium-Aluminum Alloys (UNS N06699), Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674), and Nickel-Chromium-Molybdenum-Copper Alloy (UNS N06235) Plate, Sheet, and Strip
- WK93384 - Revision of B425-19 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloys Rod and Bar
- WK93385 - Revision of D8302-20 Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography
- WK93386 - Revision of D5357-19 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction
- WK93387 - New Practice for Open-Hole and Filled-Hole Flexure Testing of Polymer Matrix Composite Laminates
- WK93388 - Revision of D8509/D8509M-23 Standard Guide for Test Method Selection and Test Specimen Design for Bolted Joint Related Properties
- WK93390 - Revision of E273-20 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing
- WK93391 - Revision of C1077-24 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- WK93395 - Revision of E570-20 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products
- WK93396 - Revision of A424/A424M-18 Standard Specification for Steel, Sheet, for Porcelain Enameling
- WK93397 - Revision of A420/A420M-24a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
- WK93398 - Revision of A858/A858M-24 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
- WK93399 - Revision of A860/A860M-24a Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
- WK93402 - Revision of F3474-20 Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
- WK93404 - Revision of E690-15(2020) Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes
- WK93405 - Reinstatement of C666/C666M-15 Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing (Withdrawn 2024)
- WK93406 - Reinstatement of C672/C672M-12 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals (Withdrawn 2021)
- WK93410 - Revision of C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
- WK93411 - Revision of E1695-20e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance
- WK93417 - Revision of C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
- WK93418 - Revision of ISO/ASTM52116-13(2020)e1 Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
- WK93419 - Revision of C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
- WK93420 - Revision of D396-24 Standard Specification for Fuel Oils
- WK93421 - Revision of C739-24 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
- WK93422 - Revision of D396-24 Standard Specification for Fuel Oils
- WK93423 - Revision of D396-24 Standard Specification for Fuel Oils
- WK93424 - Revision of D396-24 Standard Specification for Fuel Oils
- WK93425 - Revision of C739-24 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
- WK93426 - Revision of D41/D41M-11(2023) Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
- WK93427 - Revision of D7329-07(2024) Standard Specification for Food Preparation and Food Handling (Food Service) Gloves
- WK93429 - New Guide for Exoskeleton Capabilities
- WK93430 - Reinstatement of D5925-96e1 Standard Practice for Preliminary Sizing and Delineation of Soil Absorption Field Areas for On-Site Septic Systems (Withdrawn 2005)
- WK93432 - Revision of E944-19 Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance
- WK93433 - Revision of C1019-24 Standard Test Method for Sampling and Testing Grout for Masonry
- WK93434 - Revision of C1019-24 Standard Test Method for Sampling and Testing Grout for Masonry
- WK93435 - New Test Method for Determination of Water, Methanol and Ethyl Mercaptan in Liquefied Petroleum Gas (LPG) using Gas Chromatography with Vacuum Ultraviolet (GCVUV) Absorption Spectroscopy Detection
- WK93436 - Revision of E1032-19 Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film
- WK93437 - Revision of D7225-13(2019)e1 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
- WK93438 - New Practice for Application of Reference Radiographs
- WK93439 - New Practice for Application of Digital Reference Radiographic Images
- WK93440 - Revision of C1602/C1602M-22 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
- WK93441 - Revision of D3136-24 Standard Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
- WK93442 - Revision of D5253-24 Standard Terminology Relating to Floor Coverings and Textile Upholstered Furniture
- WK93443 - Revision of E473-23b Standard Terminology Relating to Thermal Analysis and Rheology
- WK93444 - Revision of E1142-24 Standard Terminology Relating to Thermophysical Properties
- WK93445 - Revision of C1600/C1600M-24 Standard Specification for Rapid Hardening Hydraulic Cement
- WK93446 - Revision of E3230-20 Standard Practice for Extraction of Particulate Matter from the Surfaces of Single-Use Components and Assemblies Designed for Use in Biopharmaceutical Manufacturing
- WK93447 - Revision of F2666-16(2024) Standard Specification for Aboveground Portable Pools for Residential Use
- WK93448 - Withdrawal of D6530-19 Standard Test Method for Total Active Biomass in Cooling Tower Waters (Kool Kount Assay; KKA)
- WK93449 - Revision of E875-20 Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
- WK93450 - New Practice for Testing for Retention of Thermal Properties after water immersion and evaporation of water
- WK93451 - Revision of C1222-23 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
- WK93452 - Revision of C1242-24 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
- WK93453 - Reinstatement of D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC) (Withdrawn 2025)
- WK93455 - Revision of E1855-20 Standard Test Method for Use of 2N2222A Silicon Bipolar Transistors as Neutron Spectrum Sensors and Displacement Damage Monitors
- WK93456 - Revision of E185-21 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
- WK93458 - Revision of E703-20 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals
- WK93459 - Revision of D8556-24 Standard Practice for Requirements of a Quality Management System for Cannabis and Hemp Operations
- WK93460 - Revision of D3575-20 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers
- WK93462 - Revision of C1583/C1583M-20 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
- WK93464 - New Specification for Standard Specification for Ductile-Iron Utility Poles
- WK93465 - Revision of D4045-19 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
- WK93466 - Revision of D1079-24 Standard Terminology Relating to Roofing and Waterproofing
- WK93468 - Revision of D5384-14(2019) Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
- WK93469 - Revision of F1165-20 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
- WK93470 - Revision of F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
- WK93471 - Withdrawal of D5604-21 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption
- WK93476 - Revision of D6820-20 Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation
- WK93477 - Revision of E1316-24b Standard Terminology for Nondestructive Examinations
- WK93480 - Revision of C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
- WK93481 - Revision of C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
- WK93482 - New Guide for Identification of needs and requirements for heavy lift drones for emergency response operations
- WK93484 - Reinstatement of D6023-16 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM) (Withdrawn 2025)
- WK93485 - Revision of D4962-18 Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water
- WK93486 - New Test Method for High Performance Liquid Chromatography of Thermoset Resins
- WK93488 - Revision of D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
- WK93489 - New Test Method for Additive manufacturing -- Qualification principles -- Test method for the gas permeability of sand moulds and cores designed with a property control structure
- WK93490 - Revision of D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
- WK93491 - Revision of D4829-21 Standard Test Method for Expansion Index of Soils
- WK93492 - Revision of E1097-12(2017) Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry
- WK93494 - Revision of D8111-23a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
- WK93495 - Revision of E1921-24 Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
- WK93496 - Revision of C219-25 Standard Terminology Relating to Hydraulic and Other Inorganic Cements
- WK93497 - Revision of D8295-19 Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements
- WK93498 - Revision of F2435-22 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
- WK93499 - Revision of E1968-19 Standard Practice for Microcrystal Testing in Forensic Analysis for Cocaine
- WK93500 - Revision of E1969-19 Standard Practice for Microcrystal Testing in Forensic Analysis for Methamphetamine and Amphetamine
- WK93501 - Revision of E2125-19 Standard Practice for Microcrystal Testing in Forensic Analysis for Phencyclidine and Its Analogues
- WK93502 - Revision of E2882-19 Standard Guide for Analysis of Clandestine Drug Laboratory Evidence
- WK93503 - Revision of E2917-24a Standard Practice for Forensic Science Practitioner Training, Continuing Education, and Professional Development Programs
- WK93505 - Revision of E3255-21 Standard Practice for Quality Assurance of Forensic Science Service Providers Performing Forensic Chemical Analysis
- WK93509 - Revision of C1369-24 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
- WK93510 - Reinstatement of D5765-16 Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating (Withdrawn 2025)
- WK93512 - Reinstatement of D4410-16 Terminology for Fluvial Sediment (Withdrawn 2025)
- WK93513 - Reinstatement of D5640-95(2014) Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water (Withdrawn 2023)
- WK93514 - Reinstatement of D5614-94(2014) Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs (Withdrawn 2023)
- WK93515 - Revision of D7094-23 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
- WK93516 - Reinstatement of E2548-16 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis (Withdrawn 2025)
- WK93518 - Revision of D7872-13(2022) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels
- WK93519 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK93520 - Revision of D7739-11(2020) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance
- WK93521 - Revision of D5001-23 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
- WK93522 - Revision of D5006-24 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
- WK93523 - Revision of D3240-22a Standard Test Method for Undissolved Water In Aviation Turbine Fuels
- WK93533 - New Practice for Intralaboratory Blind Quality Control Programs Specific to Seized-Drugs Analysis
- WK93534 - Revision of D1506-23 Standard Test Methods for Carbon Black—Ash Content
- WK93535 - Revision of C681-14(2019) Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
- WK93536 - Withdrawal of C681-14(2019) Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
- WK93538 - Revision of C1945-24e1 Standard Specification for Raw or Calcined Natural Pozzolan for Use in Concrete
- WK93539 - Revision of C1138/C1138M-24 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
- WK93540 - Revision of F449-20(2024) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
- WK93541 - Reinstatement of E2332-04 Standard Practice for Investigation and Analysis of Physical Component Failures (Withdrawn 2004)
- WK93542 - Revision of D6430-18 Standard Guide for Using the Gravity Method for Subsurface Site Characterization
- WK93543 - Revision of D6639-18 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Site Characterizations
- WK93544 - Revision of D7566-24d Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK93548 - Reinstatement of D5882-16 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations (Withdrawn 2025)
- WK93549 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK93553 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK93554 - Revision of C1586-20 Standard Guide for Quality Assurance of Mortars
- WK93555 - New Guide for Bitumen or Asphalt Stabilized Materials (BSMs or ASMs) Mixture Designs
- WK93556 - Revision of D3648-23 Standard Practices for the Measurement of Radioactivity
- WK93557 - Revision of E1848-20 Standard Guide for Selecting and Using Ecological Endpoints for Contaminated Sites
- WK93558 - Revision of E2020-22 Standard Guide for Data and Information Options for Conducting an Ecological Risk Assessment at Contaminated Sites
- WK93559 - Revision of E2205/E2205M-22 Standard Guide for Risk-Based Corrective Action for Protection of Ecological Resources
- WK93560 - Revision of D1634-17 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
- WK93561 - Revision of D1635/D1635M-19 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
- WK93563 - Revision of F3443-20 Standard Practice for Load Handling When Using an Exoskeleton
- WK93564 - Revision of D1856-21 Standard Test Method for Recovery of Asphalt from Solution by Abson Method
- WK93565 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK93566 - Revision of D4054-24 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives
- WK93567 - Revision of F894-24 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
- WK93568 - Revision of D8070-23 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay
- WK93570 - Revision of D3262-20 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
- WK93571 - Revision of F3179/F3179M-24a Standard Specification for Performance of Aircraft
- WK93572 - Revision of F2659-23 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
- WK93573 - New Test Method for Measurement of Resistance to Vertical Deflection of Modular Flooring having Profiled Edges that Interlock.
- WK93574 - New Specification for RF-Reflective Pavement Markers
- WK93575 - Revision of D6647-18(2024) Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
- WK93576 - Revision of F2417-24 Standard Specification for Fire Safety for Candles
- WK93577 - Revision of F939-19 Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings
- WK93578 - Revision of D2844/D2844M-18e1 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
- WK93581 - Reinstatement of E1138-89 Terminology of Technical Aspects of Products Liability Litigation (Withdrawn 1995)
- WK93582 - Revision of F1892-12(2018) Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices
- WK93583 - Revision of E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens
- WK93584 - Revision of E1453-20 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data
- WK93585 - Revision of C1157/C1157M-23 Standard Performance Specification for Hydraulic Cement
- WK93586 - Revision of D7688-24 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation
- WK93587 - Revision of D6079-24 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
- WK93588 - Reinstatement of D4519-16 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity (Withdrawn 2025)
- WK93589 - Reinstatement of D5542-16 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography (Withdrawn 2025)
- WK93590 - Reinstatement of D5996-16 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography (Withdrawn 2025)
- WK93591 - Reinstatement of D8026-16 Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS) (Withdrawn 2025)
- WK93592 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK93593 - Revision of C94/C94M-24d Standard Specification for Ready-Mixed Concrete
- WK93594 - Revision of C55-23 Standard Specification for Concrete Building Brick
- WK93595 - New Test Method for Silica ? Pour Density
- WK93596 - Revision of C129-23 Standard Specification for Nonloadbearing Concrete Masonry Units
- WK93597 - Revision of C139-23 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
- WK93598 - Revision of C140/C140M-24a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
- WK93599 - Revision of C140/C140M-24a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
- WK93600 - Revision of C1623-23 Standard Specification for Manufactured Concrete Masonry Lintels
- WK93601 - Revision of C1634-23a Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
- WK93602 - Revision of C1782/C1782M-24 Standard Specification for Segmental Concrete Paving Slabs
- WK93603 - Revision of C1782/C1782M-24 Standard Specification for Segmental Concrete Paving Slabs
- WK93604 - Revision of F2659-23 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
- WK93605 - Revision of C1877-24 Standard Specification for Adhered Concrete Masonry Units
- WK93606 - Revision of C1884-24 Standard Specification for Manufactured Concrete Ballast Units
- WK93607 - Revision of C618-23e1 Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
- WK93609 - New Test Method for Determination of Sorbent Performance of full size Adsorbents for use on Crude oil and Related Spills
- WK93610 - Revision of C311/C311M-24 Standard Test Methods for Sampling and Testing Coal Ash or Natural Pozzolans for Use in Concrete
- WK93611 - Revision of E2164-24b Standard Test Method for Directional Difference Test
- WK93613 - Revision of E83-23 Standard Practice for Verification and Classification of Extensometer Systems
- WK93617 - Revision of D7269/D7269M-20 Standard Test Methods for Tensile Testing of Aramid Yarns
- WK93618 - Revision of D7744/D7744M-20 Standard Test Methods for Tensile Testing of High Performance Polyethylene Films
- WK93619 - Revision of E2597/E2597M-22 Standard Practice for Manufacturing Characterization of Digital Detector Arrays
- WK93620 - Revision of C1780-24 Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
- WK93621 - Revision of C1780-24 Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
- WK93623 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK93624 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK93625 - Revision of C231/C231M-24 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
- WK93627 - Revision of E1606-20 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes
- WK93628 - Revision of C140/C140M-24a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
- WK93629 - Revision of E1941-10(2024) Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis
- WK93630 - Revision of C1063-24 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
- WK93631 - Revision of D4848-98(2018) Standard Terminology Related to Force, Deformation and Related Properties of Textiles
- WK93632 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK93634 - Reinstatement of E2108-16 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer (Withdrawn 2025)
- WK93637 - Withdrawal of D7785-21 Standard Practice for Water in Lint Cotton by Oven Evaporation Combined with Volumetric Karl Fischer Titration
- WK93638 - Revision of D5866-12(2020) Standard Test Method for Neps in Cotton Fibers
- WK93639 - Revision of D7139-20 Standard Terminology for Cotton Fibers
- WK93640 - Revision of D7984-21 Standard Test Method for Measurement of Thermal Effusivity of Fabrics Using a Modified Transient Plane Source (MTPS) Instrument
- WK93641 - Revision of D1909-13(2020)e1 Standard Tables of Commercial Moisture Regains and Commercial Allowances for Textile Fibers
- WK93642 - Revision of F3316/F3316M-19 Standard Specification for Electrical Systems for Aircraft with Electric or Hybrid-Electric Propulsion
- WK93643 - Revision of D8232-18 Standard Test Procedures for Measuring the Inclination of Deep Foundations
- WK93644 - Revision of D8-22a Standard Terminology Relating to Materials for Roads and Pavements
- WK93645 - New Test Method for Determination of Particle Size and Shape Analysis of Catalyst and Catalyst Carriers by Dynamic Imaging Analyzers
- WK93646 - Revision of D2573/D2573M-18 Standard Test Method for Field Vane Shear Test in Saturated Fine-Grained Soils
- WK93647 - Revision of D2670-20 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)
- WK93648 - New Test Method for Determining Water-Soluble Sulfate in Granular Material used for Embankments, Subgrades and Retaining Wall Backfill
- WK93649 - New Test Method for Determining the Water-Soluble Chloride Ion Content in Granular Material used for Embankments, Subgrades and Retaining Wall Backfill
- WK93650 - Revision of D8545-23e1 Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N'-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography (HPLC)
- WK93652 - Revision of D3282-24 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
- WK93654 - Revision of D187-24 Standard Test Method for Burning Quality of Kerosene
- WK93655 - Revision of D3699-24 Standard Specification for Kerosine
- WK93656 - Revision of E502-21a Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
- WK93658 - Revision of D7318-19e1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration
- WK93659 - Revision of D7830/D7830M-14(2021)e1 Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge
- WK93660 - Revision of D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
- WK93662 - New Guide for Physical Requirement Guidelines for Sensory Laboratories and Other Testing Spaces: 3rd Edition
- WK93664 - Revision of C998-17 Standard Practice for Sampling Surface Soil for Radionuclides
- WK93665 - Revision of C999-17 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
- WK93666 - Revision of C1402-17 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples
- WK93667 - Revision of C1475-17 Standard Guide for Determination of Neptunium-237 in Soil
- WK93669 - New Test Method for Silica, Pelleted, Granulated – Fines and Attrition
- WK93670 - New Guide for Water quality guidelines for makeup and recirculating waters used in electrolyzers for hydrogen production
- WK93671 - New Practice for Standard Practice for Flaw Sizing using Total Focusing Method
- WK93672 - Revision of F621-12(2021)e1 Standard Specification for Stainless Steel Forgings for Surgical Implants
- WK93673 - Revision of F961-20 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
- WK93675 - Revision of D1990-24 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
- WK93676 - New Guide for Non-Conventional Feedstocks for Refinery Processing into Hydrocarbon Products
- WK93677 - Revision of F877-24 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
- WK93678 - Revision of F141-23 Standard Terminology Relating to Resilient Floor Coverings
- WK93679 - Revision of B1025-24 Standard Specification for Electrodeposited Nanostructured Zinc-Nickel Coatings
- WK93680 - Revision of F1078-10(2024) Standard Terminology for Surgical Scissors—Inserted and Non-Inserted Blades
- WK93681 - New Guide for In-Time Aviation Safety Management System (IASMS) Functionality
- WK93682 - Revision of A463/A463M-22 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
- WK93684 - New Guide for Facilitating Circular Processing of Textile Waste
- WK93685 - New Test Method for Testing Towable Tow Point Attachment Systems
- WK93688 - Reinstatement of E995-16 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy (Withdrawn 2025)
- WK93689 - Revision of D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
- WK93690 - Revision of E928-19 Standard Test Method for Purity by Differential Scanning Calorimetry
- WK93691 - Revision of D1586/D1586M-18e1 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
- WK93693 - Revision of F1091-20 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
- WK93695 - Revision of F2687-13(2019) Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment
- WK93696 - Revision of F2916-19 Standard Practice for Environmental Impact Analysis of Commercial Food Service Equipment
- WK93697 - Revision of D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens
- WK93698 - Revision of E2069-19 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
- WK93699 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK93700 - Revision of D6367-21 Standard Specification for AMS (a-Methylstyrene)
- WK93701 - New Practice for Tests to Evaluate the Chemical Resistance of Geocells to Liquids
- WK93707 - Revision of D558/D558M-19 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
- WK93710 - Revision of D7056-07(2018) Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams
- WK93716 - Revision of E1583-21a Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures
- WK93717 - Revision of A307-21 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60?000 PSI Tensile Strength
- WK93718 - Revision of B611-21 Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials
- WK93719 - Revision of D5777-18 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
- WK93720 - Revision of D7128-18 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
- WK93721 - Revision of E1644-21 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
- WK93722 - Revision of C758-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal
- WK93723 - Revision of C759-18 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions
- WK93724 - Revision of D3512/D3512M-22 Standard Test Method for Pilling Resistance and Other Related Surface Changes of Textile Fabrics: Random Tumble Pilling Tester
- WK93725 - Revision of E1316-24b Standard Terminology for Nondestructive Examinations
- WK93726 - Revision of E1316-24b Standard Terminology for Nondestructive Examinations
- WK93727 - Revision of D8350-24a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine
- WK93728 - Revision of C78/C78M-22 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
- WK93729 - Revision of E648-23 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
- WK93730 - Revision of D3878-23 Standard Terminology for Composite Materials
- WK93731 - Revision of F2129-24 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- WK93732 - Revision of E84-24 Standard Test Method for Surface Burning Characteristics of Building Materials
- WK93733 - Revision of F1803-15(2019) Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
- WK93735 - Revision of C991-23 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
- WK93737 - Revision of D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- WK93738 - Revision of D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
- WK93739 - New Practice for Safety Management System (SMS) for Human Spaceflight
- WK93743 - Revision of E967-18 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
- WK93747 - Revision of C1239-13(2024)e1 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
- WK93748 - Revision of A635/A635M-22 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
- WK93749 - Withdrawal of D7344-17a Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)
- WK93750 - New Guide for Specification, Purchase, Installation and Maintenance of Synthetic Turf for Playground Surfacing
- WK93751 - Revision of A414/A414M-24 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
- WK93752 - Revision of A653/A653M-23 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- WK93757 - Revision of D7870/D7870M-20 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
- WK93760 - Revision of D8081-17(2021)e1 Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell
- WK93761 - Revision of D6393/D6393M-21 Standard Test Method for Bulk Solids Characterization by Carr Indices
- WK93762 - New Guide for DEM calibration using data from GranuDrum
- WK93763 - Revision of C1556-22 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
- WK93768 - Revision of F1962-22 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
- WK93769 - Revision of E1645-21 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
- WK93770 - Revision of F3137-15(2022) Standard Specification for Headgear Used in Women’s Lacrosse (excluding Goalkeepers)
- WK93772 - New Specification for Administrative provisions, Plan Review, Inspection, And Third Party Requirements For Certification Compliance Of Tiny Houses
- WK93773 - Revision of C31/C31M-24c Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK93774 - Revision of E1726-21 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
- WK93775 - Revision of D7540-09(2019) Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller
- WK93776 - Revision of D5201-05a(2020) Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings
- WK93778 - Revision of D7867-13(2020) Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature
- WK93779 - Revision of D7187-20 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching
- WK93780 - Revision of D5895-20 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
- WK93781 - Revision of C267-20 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
- WK93782 - Revision of D4940-15(2020) Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives
- WK93784 - Revision of D7393-16(2020) Standard Practice for Indicating Oil in Abrasives
- WK93785 - Revision of D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells
- WK93786 - Revision of G18-07(2020) Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
- WK93787 - New Practice for Additive manufacturing of polymers -- Environment, health and safety -- General principles for use of polymers with material extrusion
- WK93788 - Reinstatement of E3033-16 Standard Guide for Beneficial Use of Landfills and Chemically Impacted Sites (Withdrawn 2025)
- WK93789 - Revision of E2292-21 Standard Guide for Field Investigation of Carbon Monoxide Poisoning Incidents
- WK93790 - Revision of D4236-94(2021) Standard Practice for Labeling Art Materials for Chronic Health Hazards
- WK93791 - Revision of C125-24 Standard Terminology Relating to Concrete and Concrete Aggregates
- WK93792 - Reinstatement of D4435-13e1 Standard Test Method for Rock Bolt Anchor Pull Test (Withdrawn 2022)
- WK93793 - Revision of E1979-21 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
- WK93794 - Revision of G48-11(2020)e1 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
- WK93795 - Revision of E2913/E2913M-21 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
- WK93797 - Revision of D7382-20 Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
- WK93798 - Revision of E2914/E2914M-21 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
- WK93799 - Revision of E2040-19 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
- WK93801 - Revision of D4493-20 Standard Test Method for Solidification Point of Bisphenol A(4,4'-Isopropylidenediphenol)
- WK93802 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93803 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93804 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93805 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93806 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93807 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93808 - Revision of D6602-13(2022)e1 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both
- WK93809 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK93810 - Revision of D4944-25 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
- WK93811 - Revision of F1282-23a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
- WK93812 - Revision of F2973-21 Standard Specification for Insulating Lifting Links for Load Lifting Equipment Working Near Energized Power Lines
- WK93813 - Reinstatement of D3362-05 Standard Test Method for Purity of Acrylate Esters by Gas Chromatography (Withdrawn 2011)
- WK93814 - Reinstatement of D3125-06(2012) Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid (Withdrawn 2021)
- WK93815 - Revision of F2376-24 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
- WK93818 - Revision of E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness
- WK93819 - Revision of E1953-20 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
- WK93820 - Revision of E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers
- WK93821 - New Test Method for Additive Manufacturing (AM)—Metallic Powder Feedstock—Measurement of high density contaminants in titanium AM metal feedstocks using µXCT
- WK93823 - New Test Method for Standard test for measuring heat transmission through heat protective clothing materials when exposed to flammable liquid fires
- WK93824 - Revision of D2248-25 Standard Practice for Detergent Resistance of Organic Finishes
- WK93825 - Withdrawal of D2377-14(2019) Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
- WK93827 - Revision of E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
- WK93828 - Revision of G208-12(2024) Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
- WK93829 - Revision of E1875-20a Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
- WK93831 - Revision of F2670-22 Standard Consumer Safety Specification for Infant Bath Tubs
- WK93836 - Revision of F1004-23 Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
- WK93837 - Revision of D6798-02(2018) Standard Terminology Relating to Flax and Linen
- WK93838 - New Practice for Exfiltration Acceptance Testing of Installed Precast Concrete Liquid Holding Structures
- WK93839 - New Specification for the Design for Disposal of All-In-One (AIO) Herbal Material and Herbal Extract Vaporizer Devices
- WK93840 - New Specification for Ceramic Materials used In electronic cannabis concentrate vaporizer wicking systems
- WK93841 - Revision of F1492-22 Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
- WK93842 - Reinstatement of D5126-16e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone (Withdrawn 2025)
- WK93843 - Revision of F3178-24 Standard Practice for Operational Risk Assessment of Unmanned Aircraft Systems (UAS)
- WK93844 - Revision of D6684-18 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Systems
- WK93845 - Reinstatement of D6884-03(2015)e1 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems (Withdrawn 2024)
- WK93846 - Withdrawal of C1180-24 With Replacement C1232-24a Standard Terminology for Masonry
- WK93847 - Revision of A960/A960M-24a Standard Specification for Common Requirements for Wrought Steel Piping Fittings
- WK93848 - Revision of A961/A961M-24b Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
- WK93850 - Reinstatement of D3441-16 Standard Test Method for Mechanical Cone Penetration Testing of Soils (Withdrawn 2025)
- WK93851 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK93852 - Revision of D1006/D1006M-21 Standard Practice for Conducting Exterior Exposure Tests of Hand and Factory Applied Paints on Wood and Wood Composite Materials
- WK93853 - Revision of D1735-21 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
- WK93854 - Revision of D5894-21 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)
- WK93855 - Revision of C926-24 Standard Specification for Application of Portland Cement-Based Plaster
- WK93856 - Reinstatement of D5519-15 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials (Withdrawn 2024)
- WK93858 - Revision of C1745/C1745M-24 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
- WK93859 - New Test Method for Confined Stiffness of the Soil-Geosynthetic Composite
- WK93863 - Revision of D4544-20(2024) Standard Practice for Estimating Peat Deposit Thickness
- WK93864 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93865 - Revision of E561-23 Standard Test Method for KR Curve Determination
- WK93866 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93867 - Revision of E561-23 Standard Test Method for KR Curve Determination
- WK93868 - Revision of E561-23 Standard Test Method for KR Curve Determination
- WK93869 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93870 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93871 - Revision of E561-23 Standard Test Method for KR Curve Determination
- WK93872 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93873 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93874 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93875 - Revision of E399-24 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- WK93876 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK93877 - Revision of E399-24 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials
- WK93878 - Revision of E561-23 Standard Test Method for KR Curve Determination
- WK93879 - New Guide for The Characterization of Matrix Graphite
- WK93880 - Revision of D2041/D2041M-19 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures
- WK93896 - New Practice for Standard Practice for Airborne Risk Analysis of Unmanned Aircraft Systems (UAS)
- WK93897 - New Test Method for Assessment of Fire Behavior of Mattresses in Detention and Correctional Facilities by Mass Loss
- WK93898 - Revision of D7291/D7291M-22 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
- WK93899 - Revision of D2538-18 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
- WK93900 - Revision of D139-24 Standard Test Method for Float Test for Asphalt Materials
- WK93901 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK93902 - New Test Method for Measurement of Ball Bearing Contact Angle
- WK93903 - Revision of D8427-21 Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling
- WK93904 - Revision of D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
- WK93905 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK93906 - Revision of D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK93907 - Revision of D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK93908 - Revision of D5453-24 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
- WK93909 - Revision of C208-22 Standard Specification for Cellulosic Fiber Insulating Board
- WK93927 - Revision of D5708-15(2020)e1 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
- WK93928 - Revision of C185-20 Standard Test Method for Air Content of Hydraulic Cement Mortar
- WK93930 - Revision of D6344-04(2024) Standard Test Method for Concentrated Impacts to Transport Packages
- WK93931 - Revision of D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK93932 - Revision of D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK93933 - Revision of D942-23a Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method
- WK93934 - Revision of E1007-21 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
- WK93935 - Revision of D8301-21 Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method
- WK93936 - Reinstatement of D3559-15 Standard Test Methods for Lead in Water (Withdrawn 2024)
- WK93937 - Revision of E970-23 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
- WK93938 - Withdrawal of D283-13(2019) Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments
- WK93939 - Revision of A979/A979M-03(2019) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
- WK93940 - Revision of F3427-20 Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
- WK93941 - Revision of F3060-20 Standard Terminology for Aircraft
- WK93942 - Revision of D97-17b(2022) Standard Test Method for Pour Point of Petroleum Products
- WK93943 - New Guide for Standard Guide for Design, Manufacture, Installation, Operation, Maintenance, Inspection, Major Modification, and Auditing of Dry Slides
- WK93944 - New Test Method for Exoskeleton Use: Public Safety or Response: Tool Handling for Breaching
- WK93945 - Revision of E185-21 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels
- WK93946 - Revision of D5769-22 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
- WK93947 - Revision of B950-23 Standard Guide for Editorial Procedures and Form of Product Specifications for Copper and Copper Alloys
- WK93948 - Revision of D6683-19 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
- WK93950 - Revision of D5489-18(2023) Standard Guide for Care Symbols for Care Instructions on Textile Products
- WK93954 - Revision of C926-24 Standard Specification for Application of Portland Cement-Based Plaster
- WK93955 - Revision of D7023-06(2018) Standard Terminology Relating to Home Furnishings
- WK93956 - Withdrawal of E1708-20 Standard Practice for Electronic Interchange of Color and Appearance Data
- WK93957 - Revision of F2194-22e1 Standard Consumer Safety Specification for Bassinets and Cradles
- WK93959 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK93960 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK93961 - Revision of F1952-22 Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
- WK93962 - Revision of F2032-22 Standard Specification for Helmets Used for BMX Cycling
- WK93963 - Revision of F1898-22 Standard Specification for Helmets for Non-Motorized Wheeled Vehicles Used by Infants and Toddlers
- WK93964 - Revision of D5293-20 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10?°C and –35?°C Using Cold-Cranking Simulator
- WK93965 - Revision of D8309-21 Standard Guide for Stability Testing of Cannabis-Based Products
- WK93966 - Revision of B22/B22M-17 Standard Specification for Bronze Castings for Bridges and Turntables
- WK93968 - Revision of B62-17 Standard Specification for Composition Bronze or Ounce Metal Castings
- WK93971 - New Test Method for Test Method for the Analysis of Fentanyl and Related Substances Using Gas-Chromatography-Infrared Spectroscopy (GC-IR)
- WK93972 - New Practice for Preparation of Petroleum Coke Samples for Analysis
- WK93973 - New Test Method for Moisture in the Analysis Sample of Petroleum Coke
- WK93974 - Revision of E23-24 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- WK93976 - Revision of B899-24 Standard Terminology Relating to Non-ferrous Metals and Alloys
- WK93977 - Revision of B899-24 Standard Terminology Relating to Non-ferrous Metals and Alloys
- WK93978 - Revision of B899-24 Standard Terminology Relating to Non-ferrous Metals and Alloys
- WK93982 - Revision of C1256-25 Standard Practice for Interpreting Glass Fracture Surface Features
- WK93983 - Reinstatement of E2549-14 Standard Practice for Validation of Seized-Drug Analytical Methods (Withdrawn 2023)
- WK93984 - Revision of F1534-22 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
- WK93985 - Revision of F1550-22 Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimeter
- WK93986 - Revision of F1870-22 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
- WK93992 - Revision of B864/B864M-19 Standard Specification for Corrugated Aluminum Box Culverts
- WK93993 - New Practice for Standard Practice for Ground Risk Analysis of Unmanned Aircraft Systems (UAS)
- WK93994 - New Test Method for Exoskeleton Use: Construction: Reinforcing Ironworkers
- WK93995 - Revision of D149-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
- WK94003 - Revision of F141-23 Standard Terminology Relating to Resilient Floor Coverings
- WK94004 - Revision of D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
- WK94005 - Revision of F656-21 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
- WK94006 - Revision of C150/C150M-24 Standard Specification for Portland Cement
- WK94007 - Revision of C150/C150M-24 Standard Specification for Portland Cement
- WK94008 - Revision of C595/C595M-24 Standard Specification for Blended Hydraulic Cements
- WK94009 - Revision of D8120-17 Standard Test Method for Ferrous Debris Quantification
- WK94010 - Revision of F3096-23 Standard Performance Specification for Tipover Restraint(s) Used with Clothing Storage Unit(s)
- WK94012 - Revision of E981-19 Standard Test Method for Estimating Sensory Irritancy of Airborne Chemicals
- WK94015 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK94016 - Revision of D7653-24 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy
- WK94018 - New Test Method for Standard Test Method for Performance of Commercial Strip Heaters
- WK94019 - Revision of F1521-22 Standard Test Methods for Performance of Range Tops
- WK94020 - Revision of F1236-24 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
- WK94021 - Withdrawal of D2423-90(2017) Standard Test Method for Surface Wax on Waxed Paper or Paperboard
- WK94022 - Revision of F1667/F1667M-21a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
- WK94023 - Revision of C771-14(2019) Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
- WK94024 - Revision of C772-03(2019) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
- WK94025 - Revision of A182/A182M-24c Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
- WK94027 - Revision of F1897-20 Standard Specification for Leg Protection for Chain Saw Users
- WK94028 - New Specification for ASTM D37 Cannabinoid Beverage Safety and Quality Initiative
- WK94029 - New Guide for Approaches to capturing vaporizer aerosol for elemental analysis
- WK94030 - Revision of D8322-20 Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)
- WK94031 - Revision of A923-23 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
- WK94032 - Revision of A988/A988M-23 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
- WK94034 - New Specification for Alternate Specification for Crew Interface Requirements
- WK94035 - Revision of D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
- WK94036 - Revision of D7060-20 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
- WK94037 - Revision of G93/G93M-19 Standard Guide for Cleanliness Levels and Cleaning Methods for Materials and Equipment Used in Oxygen-Enriched Environments
- WK94040 - New Guide for Defining and Measuring Sustainability Goals and Key Performance Indicators within the Legal Cannabis Industries (Marijuana and Hemp)
- WK94041 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK94042 - Revision of F2209-20 Standard Guide for Training of Land Search Team Member
- WK94043 - New Guide for New Guide for determining minimum seal strength for Medical Device Packaging
- WK94044 - Revision of F1929-23 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
- WK94045 - Revision of D6729-20 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography
- WK94046 - Revision of B824-17 Standard Specification for General Requirements for Copper Alloy Castings
- WK94047 - Revision of F680-20 Standard Test Methods for Nails
- WK94048 - New Specification for Exoskeleton Minimum Performance Criteria of Upper Body and Back Support Systems
- WK94049 - Withdrawal of D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures
- WK94050 - Revision of D2291/D2291M-22 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
- WK94051 - Revision of D409/D409M-24 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method
- WK94052 - Revision of A511/A511M-21a Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
- WK94053 - Revision of F1980-21 Standard Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices
- WK94054 - Revision of A988/A988M-23 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
- WK94055 - Revision of A989/A989M-23 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
- WK94056 - Revision of E290-22 Standard Test Methods for Bend Testing of Material for Ductility
- WK94057 - Revision of E290-22 Standard Test Methods for Bend Testing of Material for Ductility
- WK94058 - Revision of E290-22 Standard Test Methods for Bend Testing of Material for Ductility
- WK94059 - Revision of E290-22 Standard Test Methods for Bend Testing of Material for Ductility
- WK94060 - Revision of E290-22 Standard Test Methods for Bend Testing of Material for Ductility
- WK94061 - Revision of D6335-19 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test
- WK94062 - Revision of D7097-19 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT
- WK94063 - New Guide for Smartphone Navigation Applications for Land Search Teams
- WK94064 - Revision of C1325-22e1 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units
- WK94068 - New Specification for Eye Protectors for Baseball and Softball
- WK94069 - Revision of C1278/C1278M-24 Standard Specification for Fiber-Reinforced Gypsum Panel
- WK94070 - Revision of C900-23 Standard Test Method for Pullout Strength of Hardened Concrete
- WK94071 - Reinstatement of D646-13 Standard Test Method for Mass Per Unit Area of Paper and Paperboard of Aramid Papers (Basis Weight) (Withdrawn 2022)
- WK94072 - Revision of D5311/D5311M-25 Standard Test Method for Load Controlled Cyclic Triaxial Response of Soil
- WK94073 - Revision of B359/B359M-23 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins
- WK94075 - Revision of A143/A143M-07(2020) Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
- WK94076 - Revision of C120/C120M-19 Standard Test Methods for Flexure Testing of Structural and Roofing Slate
- WK94077 - Revision of B395/B395M-18 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes
- WK94078 - Revision of F3298-24 Standard Specification for Design and Construction of Lightweight Unmanned Aircraft Systems (UAS)
- WK94079 - Revision of F3201-24 Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
- WK94080 - Revision of D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
- WK94081 - Revision of D6459-19 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
- WK94083 - Revision of D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
- WK94084 - Revision of D1510-24b Standard Test Method for Carbon Black—Iodine Adsorption Number
- WK94085 - Revision of D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
- WK94086 - Revision of F1235-18 Standard Consumer Safety Specification for Portable Hook-On Chairs
- WK94087 - Revision of F1235-18 Standard Consumer Safety Specification for Portable Hook-On Chairs
- WK94088 - Revision of F1193-24e1 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
- WK94089 - Revision of D5062-09(2020) Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination
- WK94090 - Revision of D6687-07(2020) Standard Guide for Testing Printing Ink Vehicles and Components Thereof
- WK94091 - Revision of D5165-12(2020) Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
- WK94092 - Revision of D6336-11(2021) Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer
- WK94094 - Revision of D4682-18(2024) Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
- WK94095 - Revision of F3099-23 Standard Practices for Parasailing
- WK94096 - Reinstatement of D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt (Withdrawn 2025)
- WK94099 - Revision of E2141-21 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units
- WK94100 - Revision of E90-23 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
- WK94101 - Revision of F2789-10(2020) Standard Guide for Mechanical and Functional Characterization of Nucleus Devices
- WK94102 - Revision of D7038-24a Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
- WK94108 - Revision of E2539-14(2021) Standard Test Method for Multiangle Color Measurement of Interference Pigments
- WK94109 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK94110 - Revision of D7566-24d Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK94111 - Revision of F3125/F3125M-25 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi, 144 ksi, and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- WK94112 - Revision of D7459-08(2024) Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources
- WK94113 - Revision of D7484-23a Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
- WK94114 - Revision of D8279-24 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine
- WK94115 - Revision of D7422-23 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
- WK94116 - Revision of D8048-24 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine
- WK94118 - Revision of D8114-23a Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition
- WK94119 - Revision of D8226-21ae1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine
- WK94121 - Revision of E353-19e1 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
- WK94122 - New Guide for recording SIF (serious incidents and fatalities) events other than occupational injuries and illnesses
- WK94123 - Revision of D5431-08(2019) Standard Performance Specification for Woven and Knitted Sheeting Products for Institutional and Household Use
- WK94126 - Revision of E1820-24 Standard Test Method for Measurement of Fracture Toughness
- WK94127 - New Specification for Glass Fiber Reinforced Polypropylene (PP-GF) Corrugated Wall Stormwater Collection Chambers
- WK94128 - Revision of F770-24 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- WK94129 - Reinstatement of D885/D885M-10A(2014)e1 Standard Test Methods for Tire Cords, Tire Cord Fabrics, and Industrial Filament Yarns Made from Manufactured Organic-Base Fibers (Withdrawn 2023)
- WK94136 - Revision of F3446-20 Standard Test Method for Determination of Frictional Torque and Friction Factor for Hip Implants Using an Anatomical Motion Hip Simulator
- WK94147 - Revision of D5685-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
- WK94148 - Revision of D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
- WK94150 - Revision of C1375-00(2020) Standard Guide for Substrates Used in Testing Building Seals and Sealants
- WK94151 - Revision of A262-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- WK94152 - Revision of C1523-17 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- WK94153 - Revision of C192/C192M-24 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
- WK94154 - Revision of A403/A403M-22b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
- WK94155 - Revision of F3585-24 Standard Test Method for Measuring Exoskeleton Cognitive Fit, Perceived Safety, and Acceptance
- WK94156 - Revision of F3210-22e1 Standard Test Method for Fatigue Testing of Total Knee Femoral Components Under Closing Conditions
- WK94157 - Revision of F2790-10(2019)e1 Standard Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
- WK94159 - Revision of C136/C136M-19 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
- WK94160 - Revision of C957/C957M-17(2024) Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Integral Wearing Surface
- WK94162 - Revision of B987/B987M-20 Standard Specification for Carbon Fiber Thermoset Polymer Matrix Composite Core (CFC) for use in Overhead Electrical Conductors
- WK94163 - New Guide for Transferability of Stormwater Field Monitoring Data Across Geographic Locations
- WK94164 - Revision of B320-60(2019) Standard Practice for Preparation of Iron Castings for Electroplating
- WK94165 - Revision of B482-85(2019) Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating
- WK94166 - Revision of D7201-06(2020) Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)
- WK94167 - Revision of B558-79(2019) Standard Practice for Preparation of Nickel Alloys for Electroplating
- WK94168 - Revision of B629-77(2019) Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating
- WK94169 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK94170 - Revision of D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
- WK94171 - Revision of D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- WK94172 - Revision of D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer
- WK94175 - Revision of C1363-24 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
- WK94176 - New Practice for Measurement of Volatile Organic Compounds Using H3O+ Proton Transfer Reaction Mass Spectrometry (PTR-MS) in Indoor Environments
- WK94177 - New Guide for Sampling and Dilution of Drilling Mud and Completion Brine for Particle Size Analysis by Dynamic Imaging Analyzers
- WK94178 - Reinstatement of F2259-10(2012)e1 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy (Withdrawn 2021)
- WK94179 - Reinstatement of D5469/D5469M-12 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems (Withdrawn 2021)
- WK94184 - Revision of F2064-17 Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
- WK94185 - Revision of E2307-25 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
- WK94187 - Revision of F2098-24 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings
- WK94189 - Revision of C1871-22 Standard Test Method for Determination of Uranium Isotopic Composition by the Double Spike Method Using a Thermal Ionization Mass Spectrometer
- WK94190 - Revision of D4439-25 Standard Terminology for Geosynthetics
- WK94191 - Revision of D4439-25 Standard Terminology for Geosynthetics
- WK94192 - Revision of D4439-25 Standard Terminology for Geosynthetics
- WK94193 - Revision of D4439-25 Standard Terminology for Geosynthetics
- WK94194 - Revision of D4439-25 Standard Terminology for Geosynthetics
- WK94195 - Revision of C1928/C1928M-24 Standard Test Method for Compressive Strength of Alkali Activated Cementitious Material Mortars (Using 50?mm [2?in.] Cube Specimens)
- WK94196 - Revision of C1928/C1928M-24 Standard Test Method for Compressive Strength of Alkali Activated Cementitious Material Mortars (Using 50?mm [2?in.] Cube Specimens)
- WK94197 - Revision of D4659-19 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
- WK94198 - Revision of C1353/C1353M-20e1 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser
- WK94199 - Revision of F2090-21 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
- WK94200 - Revision of A6/A6M-24b Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- WK94201 - Revision of D6730-22 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography
- WK94202 - New Test Method for Direct Analysis of Airborne Microplastics (MP) Collected on Quartz Particulate Matter (PM) Filters by Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC/MS).
- WK94203 - Revision of D7342-20 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)
- WK94204 - New Specification for the Safety of Dog Collars, Harnesses and Leashes
- WK94205 - New Specification for the Safety of Dog Home Crates and Travel Kennels
- WK94206 - Revision of D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
- WK94207 - Revision of F3222-16(2025) Standard Terminology Relating to F32 Land Search and Rescue Standards and Guides
- WK94208 - Revision of D3595-14(2019)e1 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
- WK94209 - Revision of D6867-19 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
- WK94210 - Revision of C1647-20 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials
- WK94211 - Revision of C1845-24 Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
- WK94213 - Revision of F141-23 Standard Terminology Relating to Resilient Floor Coverings
- WK94214 - Revision of E1131-20 Standard Test Method for Compositional Analysis by Thermogravimetry
- WK94215 - Revision of E1582-21 Standard Test Method for Temperature Calibration of Thermogravimetric Analyzers
- WK94216 - Revision of E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
- WK94217 - Withdrawal of E854-19(2025) Standard Test Method for Application and Analysis of Solid-State Track Recorder (SSTR) Monitors for Reactor Surveillance
- WK94218 - Withdrawal of E2059-20 Standard Practice for Application and Analysis of Nuclear Research Emulsions for Fast Neutron Dosimetry
- WK94219 - New Specification for Computer Based Control Systems (CBCS) for Light Sport Aircraft
- WK94222 - Revision of F2872-19 Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
- WK94225 - Revision of D7188-05(2019) Standard Terminology for Printing Inks, Materials, and Processes
- WK94226 - Revision of D7244-20 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
- WK94227 - Revision of D7189-12(2020) Standard Test Method for Relative Mileage of News Ink on Newsprint
- WK94228 - Revision of D3796-09(2024)e1 Standard Practice for Calibration of Type S Pitot Tubes
- WK94229 - Revision of E23-24 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- WK94230 - Revision of D3464-96(2023) Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer
- WK94232 - Revision of F3657-23 Standard Specification for Verification of Lightweight Unmanned Aircraft Systems (UAS)
- WK94235 - Revision of E1953-20 Standard Practice for Description of Thermal Analysis and Rheology Apparatus
- WK94236 - Revision of E2777-20 Standard Guide for Vegetative (Green) Roof Systems
- WK94237 - New Practice for Standard Practice for Writing Terminology in Committee D13 on Textiles
- WK94238 - New Practice for Recommended Values for Temperature and Enthalpy (Heat) of Melting
- WK94239 - Reinstatement of D2669-16 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts) (Withdrawn 2025)
- WK94243 - Revision of E2614-15(2020)e1 Standard Guide for Evaluation of Cleanroom Disinfectants
- WK94244 - Revision of F2670-22 Standard Consumer Safety Specification for Infant Bath Tubs
- WK94245 - Revision of F2871-23 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
- WK94246 - Revision of F3678-23 Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire SW
- WK94247 - Revision of D8520/D8520M-23 Standard Specification for Iodotrifluoromethane (CF3I)
- WK94248 - New Test Method for Determining Intermediate- and Low-Temperature Rheological Properties of Asphalt Binders Using a Dynamic Shear Rheometer (DSR)
- WK94249 - New Test Method for Determining the Peak Stress Energy and Shear Fatigue Resistance of Asphalt Binder Using a Dynamic Shear Rheometer (DSR) Monotonic Shear Strength (MOSS) Test
- WK94250 - Revision of D1550-18 Standard ASTM Butadiene Measurement Tables
- WK94251 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK94252 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK94253 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK94254 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK94255 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK94256 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK94257 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK94258 - New Test Method for Standard Test Method for Uniaxial Constant Force Repeated Thermal Cycling of Shape Memory Alloys
- WK94259 - Revision of C208-22 Standard Specification for Cellulosic Fiber Insulating Board
- WK94260 - Revision of F3728-24 Standard Specification for Release Characteristics of Ski-Binding-Boot (S-B-B) Systems for Recreational Skiing
- WK94261 - New Practice for Specific Heat Capacity reference Values
- WK94262 - New Guide for PFAS Sampling Guide for Environmental Media
- WK94263 - Revision of F2752-19 Standard Guide for Training for Basic Rope Rescuer Endorsement
- WK94264 - Revision of F2794-09(2020) Standard Guide for Level 1 (Basic) Mounted Search and Rescue (MSAR) Responder
- WK94265 - Revision of F3071-14(2020) Standard Guide for Basic Wilderness GPS/GNSS Use (GPS/GNSS-IW) Endorsement
- WK94266 - Revision of F3072-14(2020) Standard Guide for Intermediate Wilderness GPS/GNSS Use (GPS/GNSS-IIW) Endorsement
- WK94267 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK94268 - Revision of E601-20 Standard Guide for Measuring Electromotive Force (EMF) Stability of Base-Metal Thermoelement Materials With Time in Air
- WK94270 - Revision of D618-21 Standard Practice for Conditioning Plastics for Testing
- WK94271 - New Test Methods for New Standard Determining the Hydraulic Capacity of Trash Screens Installed in Stormwater Structures.
- WK94273 - Revision of E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature
- WK94274 - Revision of D7474-17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
- WK94276 - New Guide for Soil Tight Grouted Connections Between Concrete Pipe and Concrete Structures
- WK94277 - New Test Method for Determination of Alkali Release from Cementitious Materials
- WK94278 - Revision of F2061-17 Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions
- WK94279 - Revision of E3205-20 Standard Test Method for Small Punch Testing of Metallic Materials
- WK94280 - New Guide for General Guidelines for Measuring Fire Extinguishing Agent Concentrations in Powerplant Compartments
- WK94281 - Revision of E2280-21 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
- WK94283 - Revision of B366/B366M-23 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings
- WK94284 - Revision of B462-25 Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
- WK94285 - Revision of B564-22 Standard Specification for Nickel Alloy Forgings
- WK94286 - Revision of D6630/D6630M-16(2022) Standard Guide for Low-Slope Insulated Roof Membrane Assembly Performance
- WK94291 - Revision of B560-20 Standard Specification for Modern Pewter Alloys
- WK94293 - Revision of D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
- WK94294 - New Specification for Consumer Safety Specification for Buoyancy Aids for Children
- WK94295 - New Specification for Eye Protectors for Basketball, Soccer, Volleyball, and Flag Football
- WK94297 - Revision of D5898/D5898M-96(2021) Standard Guide for Standard Details for Adhered Sheet Waterproofing
- WK94298 - Revision of D5898/D5898M-96(2021) Standard Guide for Standard Details for Adhered Sheet Waterproofing
- WK94299 - Revision of D5898/D5898M-96(2021) Standard Guide for Standard Details for Adhered Sheet Waterproofing
- WK94300 - Revision of D5898/D5898M-96(2021) Standard Guide for Standard Details for Adhered Sheet Waterproofing
- WK94301 - Revision of D4926-20 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction
- WK94302 - Revision of D8352-20 Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction
- WK94303 - Revision of F1169-19 Standard Consumer Safety Specification for Full-Size Baby Cribs
- WK94306 - New Specification for Crew Interface Regulations
- WK94307 - Revision of F1169-19 Standard Consumer Safety Specification for Full-Size Baby Cribs
- WK94319 - Revision of B917/B917M-12(2020) Standard Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes
- WK94321 - Reinstatement of D2113-14 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration (Withdrawn 2023)
- WK94322 - Revision of F2947/F2947M-21a Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
- WK94323 - Revision of E1925-18 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures
- WK94324 - Revision of C1093-23 Standard Practice for Accreditation of Testing Agencies for Masonry
- WK94325 - Revision of D3666-24 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK94327 - Revision of C788-03(2021) Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals
- WK94329 - Revision of D3173/D3173M-17a Standard Test Method for Moisture in the Analysis Sample of Coal and Coke
- WK94330 - Revision of D3175-20 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke
- WK94331 - Revision of D4208-19 Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method
- WK94332 - Revision of D4239-18e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion
- WK94333 - Revision of D8010-18 Standard Test Method for Determination of Water Soluble Alkali Content in Coal
- WK94334 - Revision of D8214-18 Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma?Atomic Emission Spectrometry
- WK94335 - Revision of C582-23 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
- WK94338 - Revision of D6297-20 Standard Specification for Asphaltic Plug Joints for Bridges
- WK94340 - Revision of E2587-24 Standard Practice for Use of Control Charts in Statistical Process Control
- WK94341 - Withdrawal of C441/C441M-17 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
- WK94342 - Revision of F2433-05(2018) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness
- WK94343 - Revision of D1607-91(2018)e1 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)
- WK94344 - Revision of D8334/D8334M-20 Standard Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses
- WK94345 - Revision of D6831-11(2018) Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance
- WK94346 - Revision of E1251-24 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
- WK94347 - Revision of F3695-24 Standard Specification for Angle of Attack (AoA) Functional Requirements
- WK94352 - Withdrawal of E2726/E2726M-12a(2017) Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
- WK94353 - Revision of C76M-22a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
- WK94354 - Revision of C76-22a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- WK94355 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK94356 - Revision of E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
- WK94358 - Revision of D7879-13(2018) Standard Test Method for Determining Flax Fiber Widths Using Image Analysis
- WK94359 - Revision of D6598-19 Standard Guide for Installing and Operating Settlement Points for Monitoring Vertical Deformations
- WK94360 - Revision of C566-19 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
- WK94361 - Revision of D1424-21 Standard Test Method for Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) Apparatus
- WK94362 - Revision of D4716/D4716M-22 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
- WK94363 - New Test Method for Physical Assault on Vertical Mesh Barriers for Detention and Correctional Facilities
- WK94364 - Revision of D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers
- WK94365 - Revision of E3317-22 Standard Specification for Silica-Based Sediments for the Evaluation of Stormwater Treatment Devices
- WK94366 - Revision of A653/A653M-23 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- WK94367 - Revision of D8276-19(2024) Standard Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry
- WK94369 - Reinstatement of D6588/D6588M-11(2016) Standard Test Method for Fatigue of Tire Cords (Disc Fatigue Test) (Withdrawn 2025)
- WK94370 - Reinstatement of D5219-15 Standard Terminology Relating to Body Dimensions for Apparel Sizing (Withdrawn 2024)
- WK94374 - Revision of B543/B543M-18 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube
- WK94375 - Revision of B466/B466M-18 Standard Specification for Seamless Copper-Nickel Pipe and Tube
- WK94376 - Revision of B315-19 Standard Specification for Seamless Copper Alloy Pipe and Tube
- WK94377 - Revision of B552-19 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants
- WK94378 - Revision of B587-19 Standard Specification for Welded Brass Tube
- WK94379 - Withdrawal of D7807-20 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection
- WK94380 - Revision of F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
- WK94383 - Revision of D3606-24a Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography
- WK94384 - Revision of A646/A646M-24 Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
- WK94385 - Revision of D1185-98a(2025) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
- WK94388 - Revision of D8376-21 Standard Classification for Cannabis/Hemp Extract Vaporizers
- WK94389 - Revision of D8372-21 Standard Guide for Cannabis/Hemp Extract Vaporizers
- WK94390 - Revision of A463/A463M-22 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
- WK94391 - Revision of A653/A653M-23 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- WK94392 - Revision of A792/A792M-23 Standard Specification for Steel Sheet, 55?% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
- WK94393 - Revision of A875/A875M-23 Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process
- WK94394 - Revision of A1046/A1046M-24 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
- WK94395 - Revision of E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
- WK94396 - Reinstatement of D5042-90(2009) Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins (Withdrawn 2018)
- WK94399 - New Test Method for Friction testing of adhesive-backed polymeric mats used within bathing surfaces
- WK94400 - Revision of D3700-21 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
- WK94402 - Revision of E2357-24 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
- WK94403 - Revision of D8051/D8051M-16(2023) Standard Specification for Wax-Modified Asphalt Used in Roofing
- WK94404 - Revision of B316/B316M-20 Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
- WK94405 - Revision of B565-20 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods
- WK94406 - Revision of D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
- WK94407 - Revision of D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
- WK94408 - New Test Method for the evaluation of shatter resistant window using ball drop impact
- WK94409 - Revision of F1970-24 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
- WK94410 - Revision of E1194-17 Standard Test Method for Vapor Pressure
- WK94411 - Revision of E1706-20 Standard Test Method for Measuring the Toxicity of Sediment-Associated Contaminants with Freshwater Invertebrates
- WK94412 - Revision of E2455-22 Standard Guide for Conducting Laboratory Toxicity Tests with Freshwater Mussels
- WK94413 - Revision of D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics
- WK94414 - Revision of D6648-25 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
- WK94415 - New Specification for Light Sport Category Aircraft Flown at Night
- WK94416 - Revision of D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method
- WK94418 - Revision of D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)
- WK94419 - Revision of B916-01(2021) Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal
- WK94420 - Revision of C632-88(2021) Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling
- WK94421 - Revision of B1000-21 Standard Practices for Casting Preparation and Test Procedure of Porcelain Enamel-lined Pipe, Fittings, and Valves for Use in the Municipal Wastewater, Sewage, and Water Treatment Industry
- WK94422 - Revision of C703-72(2021) Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum
- WK94424 - Revision of C283-13(2021) Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid
- WK94425 - Revision of C448-88(2021) Standard Test Methods for Abrasion Resistance of Porcelain Enamels
- WK94426 - Revision of C774-88(2021) Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing
- WK94427 - Revision of C539-84(2021) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
- WK94428 - Revision of C756-87(2021) Standard Test Method for Cleanability of Surface Finishes
- WK94429 - Revision of C859-24 Standard Terminology Relating to Nuclear Materials
- WK94430 - Revision of D120-22 Standard Specification for Rubber Insulating Gloves
- WK94431 - Revision of E857-05(2019) Standard Practice for Conducting Subacute Dietary Toxicity Tests with Avian Species
- WK94432 - New Test Method for Strain Hardening Modulus (SHM) in relation to slow crack growth for polyethylene materials in piping systems
- WK94433 - Revision of F588-17(2023) Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
- WK94434 - Revision of E1490-19 Standard Guide for Two Sensory Descriptive Analysis Approaches for Skin Creams and Lotions
- WK94436 - Revision of E2082-12(2020) Standard Guide for Descriptive Analysis of Shampoo Performance
- WK94437 - Revision of E2049-20 Standard Guide for Quantitative Attribute Evaluation of Fragrance/Odors for Hair-care Products by Trained Assessors
- WK94438 - Revision of E2243-13(2019) Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Re-contouring and Highwall Reclamation
- WK94439 - Revision of E2278-13(2019) Standard Guide for Use of Coal Combustion Products (CCPs) for Surface Mine Reclamation: Revegetation and Mitigation of Acid Mine Drainage
- WK94440 - Revision of E2277-14(2019) Standard Guide for Design and Construction of Coal Ash Structural Fills
- WK94447 - Revision of D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
- WK94448 - Revision of D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)
- WK94449 - Revision of E72-22 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
- WK94450 - Revision of D2672-20e1 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
- WK94451 - Revision of D5989-18 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
- WK94455 - Revision of E2111-12(2018) Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals
- WK94458 - Revision of E1838-17 Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults
- WK94460 - Revision of B135/B135M-17 Standard Specification for Seamless Brass Tube
- WK94461 - New Classification for Evaluating and Differentiating Enabling and Emerging Technologies in the Digital Supply Chain
- WK94462 - Revision of C1504-20 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
- WK94464 - Revision of D86-23ae2 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure
- WK94465 - Revision of D7508/D7508M-20 Standard Specification for Polyolefin Chopped Strands for Use in Concrete
- WK94466 - Revision of D8229-19 Standard Guide for Corrective Action and Preventive Action (CAPA) for the Cannabis Industry
- WK94467 - Revision of D7475-20 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
- WK94468 - Revision of D6456-10(2018) Standard Specification for Finished Parts Made from Polyimide Resin
- WK94469 - Revision of D2559-12a(2024) Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
- WK94470 - Revision of E546-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
- WK94471 - Revision of E576-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
- WK94472 - Revision of E2188-19 Standard Test Method for Insulating Glass Unit Performance
- WK94473 - Revision of D6306-17(2024) Standard Guide for Placement and Use of Diffusive Samplers for Gaseous Pollutants in Indoor Air
- WK94474 - Revision of D8345-21 Standard Test Method for Determination of an Emission Parameter for Phthalate Esters and Other Non-Phthalate Plasticizers from Planar Polyvinyl Chloride Indoor Materials for Use in Mass Transfer Modeling Calculations
- WK94476 - Revision of D7254-21 Standard Specification for Polypropylene (PP) Siding
- WK94477 - Revision of F1041-20 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
- WK94478 - Revision of F2620-24 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
- WK94480 - Revision of F1533-20 Standard Specification for Deformed Polyethylene (PE) Liner
- WK94482 - Revision of D3835-24 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
- WK94483 - New Guide for Developing Evaluation Rubrics to Support Ontology-Based Classification of Emerging Technologies in the Digital Supply Chain
- WK94484 - Revision of F1505-16(2021) Standard Specification for Insulated and Insulating Hand Tools
- WK94485 - New Guide for Describing Coal Combustion Products in Field Investigations for Beneficial Use
- WK94486 - Revision of D2846/D2846M-24 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
- WK94488 - Revision of F887-23 Standard Specifications for Personal Climbing Equipment
- WK94489 - Revision of D2837-24 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
- WK94490 - New Guide for Per- and Polyfluoroalkyl Substances Investigation and Remediation
- WK94491 - New Guide for Microparticles: Identification, assessment and cleanup.
- WK94492 - Revision of F2929-25 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig
- WK94493 - Revision of F2905/F2905M-24a Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications
- WK94494 - Revision of D8058-24 Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test
- WK94495 - Revision of E2139-25 Standard Test Method for Same-Different Test
- WK94496 - Revision of D3755-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
- WK94497 - Revision of F3706-24 Standard Practice for In Field Spray Applied Mortar Linings for Large Diameter Stormwater and Sewer Conduits
- WK94498 - Revision of F1668-16(2022) Standard Guide for Construction Procedures for Buried Plastic Pipe
- WK94499 - Revision of D7285-06(2017) Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
- WK94501 - New Guide for Standard Guide for Real Time Aging of Sterile Barrier Systems and Medical Devices
- WK94502 - Revision of E2260-24a Standard Guide for Repointing (Tuckpointing) Historic Masonry
- WK94505 - Revision of E1225-25 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique
- WK94506 - Revision of A657/A657M-18(2024) Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
- WK94507 - Revision of F2624-12(2020) Standard Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Single Level Spinal Constructs
- WK94512 - Revision of F3284-18 Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry
- WK94514 - Revision of C577-19 Standard Test Method for Permeability of Refractories
- WK94515 - Revision of C39/C39M-24 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
- WK94516 - New Specification for Natural Fiber Blanket Thermal Insulation
- WK94517 - New Practice for Population Modeling for Launch and Reentry Public Risk Analysis
- WK94518 - New Guide for Standard Guide for Contaminated Sediment Site Risk-Based Corrective Action - A Framework for Site Assessments and the Corrective Action Process
- WK94519 - Revision of E3300-21 Standard Guide for NAPL Mobility and Migration in Sediment— Evaluating Ebullition and Associated NAPL/Contaminant Transport
- WK94520 - Revision of F2947/F2947M-21a Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications
- WK94521 - Revision of F628-24 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
- WK94523 - Revision of E3385-24 Standard Practice for On-Site Inspection of Fire Resistive Duct Systems
- WK94524 - Revision of F2059-21 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask
- WK94525 - Revision of F2152-07(2021) Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
- WK94526 - Revision of F3682-24c Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions
- WK94527 - Revision of F2327-21 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
- WK94528 - New Practice for Applying a Goods Movement Process Code as Suffix to a Globally Unique Transport Unit Identifier
- WK94529 - New Terminology for Supply Chain Information Technologies
- WK94530 - New Terminology for Traceability and Certificate of Authenticity
- WK94531 - Revision of D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding
- WK94532 - Revision of D6756-17 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer
- WK94533 - Revision of E636-20 Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels
- WK94540 - Revision of D1275-24 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids
- WK94541 - Revision of A230/A230M-19 Standard Specification for Steel Wire, Carbon Valve Spring Quality
- WK94542 - New Test Method for Single-Stage Total Moisture in Coke
- WK94543 - Revision of A1092-15(2020) Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
- WK94544 - Revision of D4169-23e1 Standard Practice for Performance Testing of Shipping Containers and Systems
- WK94545 - Revision of F2561-20(2025) Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
- WK94546 - Revision of F3240-19(2023) Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines
- WK94558 - Revision of F3556-24 Standard Specification for Physical Properties of Polyethylene Corrugated Gravity Flow (non-pressure) Pipe and Fittings with Recycled Content
- WK94559 - Revision of D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique
- WK94560 - Revision of D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids
- WK94561 - Revision of D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids
- WK94562 - Revision of D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids
- WK94563 - Revision of D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids
- WK94567 - New Guide for ASTM Traceability Standards
- WK94568 - Revision of D4649-20 Standard Guide for Use of Stretch Films and Wrapping Application
- WK94570 - Revision of D5414-95(2020) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
- WK94571 - Revision of D5415-95(2020) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
- WK94572 - Revision of D5416-95(2020) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
- WK94573 - Revision of D5458-95(2020) Standard Test Method for Peel Cling of Stretch Wrap Film
- WK94574 - Revision of D5459-95(2020) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
- WK94575 - Revision of D5728-12(2020) Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
- WK94576 - Revision of D8314-20 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
- WK94577 - Revision of C578-23 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
- WK94578 - Revision of E1870-11(2019) Standard Test Method for Odor and Taste Transfer from Polymeric Packaging Film
- WK94579 - Revision of D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids
- WK94580 - Revision of D653-24a Standard Terminology Relating to Soil, Rock, and Contained Fluids
- WK94581 - Revision of F1117-03(2019) Standard Specification for Dielectric Footwear
- WK94582 - Revision of F141-23 Standard Terminology Relating to Resilient Floor Coverings
- WK94583 - Revision of F141-23 Standard Terminology Relating to Resilient Floor Coverings
- WK94584 - Revision of C1375-00(2020) Standard Guide for Substrates Used in Testing Building Seals and Sealants
- WK94585 - Revision of E3031-20 Standard Practice for Determination of Antibacterial Activity on Ceramic Surfaces
- WK94587 - Revision of D7167-12(2018) Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
- WK94588 - Revision of D5498-12a(2018) Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
- WK94589 - New Test Method for Mercury Content of Waste Plastics by Combustion Amalgamation Cold Vapor Atomic Absorption Spectroscopy
- WK94590 - Revision of D4537-12(2018) Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
- WK94591 - Revision of D7108-12(2018) Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
- WK94592 - Revision of F1918-21 Standard Safety Performance Specification for Soft Contained Play Equipment
- WK94593 - Revision of F1918-21 Standard Safety Performance Specification for Soft Contained Play Equipment
- WK94594 - Revision of F3207-17 Standard Guide for in vivo Evaluation of Rabbit Lumbar Intertransverse Process Spinal Fusion Model
- WK94595 - Revision of F1498-08(2020) Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings
- WK94596 - Revision of D2321-20 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
- WK94597 - Revision of C1364-23e1 Standard Specification for Architectural Cast Stone
- WK94598 - Revision of D695-23 Standard Test Method for Compressive Properties of Rigid Plastics
- WK94599 - Revision of D1938-19 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
- WK94600 - Revision of E3435-24 Standard Practice for Testing Antimicrobial or Disinfectant Efficacy Against Biofilms Grown on a Medical Device or Surface by the Biofilm Surface Test Protocol (BSTP)
- WK94611 - Revision of A370-24a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- WK94612 - New Test Method for Determination of Carbon, Hydrogen, and Nitrogen content in Waste Plastics
- WK94614 - Revision of D1831-21 Standard Test Method for Roll Stability of Lubricating Grease
- WK94615 - Revision of B19-20 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
- WK94616 - Revision of B96/B96M-20 Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
- WK94617 - Revision of B122/B122M-20 Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
- WK94618 - Revision of B465-20 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- WK94619 - Revision of B591-20a Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar
- WK94620 - Revision of B592-20 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar
- WK94621 - Revision of B747-20 Standard Specification for Copper-Zirconium Alloy Sheet and Strip
- WK94622 - Revision of B169/B169M-20 Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
- WK94623 - Revision of D3377-04(2018) Standard Test Method for Weight Loss of Solventless Varnishes
- WK94627 - Revision of D3312-18 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes
- WK94629 - Revision of D8022-20 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)
- WK94630 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK94631 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK94632 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK94633 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK94634 - Revision of D8270-23b Standard Terminology Relating to Cannabis
- WK94636 - Revision of F3196-18 Standard Practice for Seeking Approval for Beyond Visual Line of Sight (BVLOS) Small Unmanned Aircraft System (sUAS) Operations
- WK94637 - New Specification for Standard Safety and Performance Specification for Soccer Goals Weighing 40 lbs. or Less.
- WK94639 - New Practice for Measuring Energy Efficiency and Emissions in Use of Residential Buildings
- WK94640 - New Guide for Recruiting and Screening of Consumers for Sensory Tests
- WK94641 - New Practice for Recovered Carbon Black (rCB) --- Reduction and Blending of Gross Samples for Testing
- WK94642 - New Practice for Application of Development Assurance Methodologies to Aircraft Levels
- WK94645 - New Specification for Interlayer materials used in the production of laminated glass for architectural applications.
- WK94646 - Revision of F2291-24 Standard Practice for Design of Amusement Rides and Devices
- WK94648 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94649 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94650 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94651 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94652 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94653 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94654 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94655 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94656 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94657 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94658 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94659 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94660 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94661 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94662 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94663 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94664 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94665 - Revision of B243-24 Standard Terminology of Powder Metallurgy
- WK94666 - New Test Method for Sequential Column Percolation Extraction of Mine rock with Meteoric Water and/or Water of Interest
- WK94668 - Revision of D8109-17(2024) Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
- WK94669 - Revision of D5057-17 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
- WK94672 - Revision of E2112-23 Standard Practice for Installation of Exterior Windows, Doors and Skylights
- WK94673 - Revision of E2692-10(2018) Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products
- WK94674 - Revision of E811-09(2020)e1 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
- WK94675 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK94676 - Revision of F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
- WK94677 - Withdrawal of D8181-19 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils
- WK94678 - Revision of D5769-22 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
- WK94679 - New Specification for Industrial Resistance Welded Light Wire Mesh
- WK94680 - Revision of F3686-24a Standard Practice for Production Approval of Unmanned Aircraft Systems (UAS)
- WK94684 - Revision of B528-16(2020)e1 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens
- WK94685 - Revision of B595-21 Standard Specification for Materials for Aluminum Powder Metallurgy (PM) Structural Parts
- WK94687 - Revision of E316-17 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry
- WK94688 - Revision of E1070-17a Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry
- WK94689 - Revision of E2321-03(2019) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
- WK94690 - Revision of E2485/E2485M-13(2018) Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
- WK94691 - Revision of E2568-17a Standard Specification for PB Exterior Insulation and Finish Systems
- WK94692 - Revision of C990/C990M-24 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
- WK94696 - Revision of A540/A540M-24 Standard Specification for Alloy-Steel Bolting for Special Applications
- WK94697 - Revision of D7546-24 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
- WK94699 - Reinstatement of E2967-15 Standard Test Method for Assessing the Ability of Pre-wetted Towelettes to Remove and Transfer Bacterial Contamination on Hard, Non-Porous Environmental Surfaces Using the Wiperator (Withdrawn 2024)
- WK94702 - Revision of F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK94703 - Revision of F3491-21 Standard Practice for Enhanced Indication Methods in Aircraft
- WK94704 - Revision of F3117/F3117M-24a Standard Specification for Crew Interface in Aircraft
- WK94705 - Revision of F3117/F3117M-24a Standard Specification for Crew Interface in Aircraft
- WK94706 - Revision of F3454-21 Standard Practice for Alerting Methods in Aircraft
- WK94709 - Revision of D4991-07(2023) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
- WK94710 - Revision of A576-23 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
- WK94711 - Withdrawal of C1504M-20 With Replacement null
- WK94713 - Revision of F2029-16(2021) Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
- WK94716 - Revision of D1185-98a(2025) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
- WK94717 - Revision of D7216-23 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
- WK94718 - Revision of A962/A962M-24a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
- WK94719 - Revision of D7884-24 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography
- WK94726 - Revision of D2290-19a Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
- WK94727 - Revision of D1517-23 Standard Terminology Relating to Leather
- WK94728 - Reinstatement of D3424-11 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter (Withdrawn 2020)
- WK94729 - Revision of D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
- WK94730 - Revision of D4607-14(2021) Standard Test Method for Determination of Iodine Number of Activated Carbon
- WK94733 - Revision of D5397-20 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
- WK94734 - Revision of D4586/D4586M-07(2024) Standard Specification for Asphalt Roof Cement, Asbestos-Free
- WK94735 - New Specification for Medical-Grade Porous Polyethylene membranes
- WK94737 - Revision of D1037-12(2020) Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
- WK94738 - Revision of D6550-20 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography
- WK94741 - Revision of D3171-22 Standard Test Methods for Constituent Content of Composite Materials
- WK94742 - Revision of F3741-24 Standard Specification for Hydrogel Projectile Launchers
- WK94743 - Revision of F2193-20 Standard Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
- WK94745 - Revision of D8256-24b Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions
- WK94748 - Revision of A262-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- WK94749 - Revision of A262-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- WK94756 - Withdrawal of D1649-01(2019) Standard Specification for Strontium Chromate Pigment
- WK94757 - Withdrawal of D83-84(2020) Standard Specification for Red Lead Pigment
- WK94758 - Withdrawal of D49-83(2020) Standard Test Methods of Chemical Analysis of Red Lead
- WK94759 - Revision of D943-20 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils
- WK94760 - Revision of D5577-19 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
- WK94761 - Revision of D7911-19 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test
- WK94762 - Revision of F1713-08(2021)e1 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
- WK94763 - Revision of A262-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
- WK94764 - Revision of E1181-02(2023) Standard Test Methods for Characterizing Duplex Grain Sizes
- WK94765 - Revision of A760/A760M-15(2020) Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
- WK94766 - New Practice for Determining the Temperature in Neutron Radiation Environments using Silicon Carbide Passive Temperature Monitors
- WK94767 - Revision of C125-25a Standard Terminology Relating to Concrete and Concrete Aggregates
- WK94768 - Revision of F1920-20 Standard Test Method for Performance of Rack Conveyor Commercial Dishwashing Machines
- WK94769 - New Guide for Training Iris Image Examiners
- WK94772 - Revision of E289-17 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
- WK94773 - Revision of F2694-16(2020) Standard Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
- WK94774 - Revision of F833-21 Standard Consumer Safety Performance Specification for Carriages and Strollers
- WK94776 - Revision of D3366-18 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale)
- WK94777 - Revision of D8087-18 Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
- WK94778 - Revision of E2050-17 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion
- WK94779 - Revision of E2575-19 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion
- WK94780 - Revision of F844-19(2024) Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
- WK94789 - Revision of F3728-24 Standard Specification for Release Characteristics of Ski-Binding-Boot (S-B-B) Systems for Recreational Skiing
- WK94790 - Revision of A574-21 Standard Specification for Alloy Steel Socket-Head Cap Screws
- WK94791 - Revision of C1071-19 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
- WK94792 - Revision of E2943-25 Standard Guide for Acceptance and Preference Testing with Consumers
- WK94793 - Revision of F3323-24 Standard Terminology for Exoskeletons and Exosuits
- WK94794 - Revision of B76-90(2018) Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
- WK94795 - Revision of B70-90(2019) Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating
- WK94799 - Revision of D883-25 Standard Terminology Relating to Plastics
- WK94800 - Revision of D883-25 Standard Terminology Relating to Plastics
- WK94801 - Revision of D883-25 Standard Terminology Relating to Plastics
- WK94802 - Revision of D883-25 Standard Terminology Relating to Plastics
- WK94803 - Revision of F1717-21 Standard Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
- WK94805 - Revision of B63-07(2018) Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials
- WK94806 - Revision of B362-91(2020) Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal
- WK94807 - Revision of B389-81(2020) Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal
- WK94808 - Revision of D975-24a Standard Specification for Diesel Fuel
- WK94809 - Revision of C534/C534M-24 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- WK9481 - New Standard Terminology for Soils and Turfgrass for Sports Fields
- WK94810 - Revision of C534/C534M-24 Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
- WK94811 - Revision of A572/A572M-21e1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
- WK94812 - Revision of C1534-24 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
- WK94813 - Revision of C1014-17 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
- WK94814 - Revision of A74-21 Standard Specification for Cast Iron Soil Pipe and Fittings
- WK94815 - Revision of B228-11a(2021) Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
- WK94816 - Revision of D8253-21 Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy Method)
- WK94817 - New Guide for Fatigue and Damage Tolerance (F&DT) and NDI Considerations for Metal AM Components in Aerospace
- WK94821 - Revision of D3612-02(2017) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography
- WK94823 - Revision of B593-21 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials
- WK94824 - Revision of A904-20 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts
- WK94825 - Revision of D7820-19(2024) Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
- WK94826 - Revision of C916-20 Standard Specification for Adhesives for Duct Thermal Insulation
- WK94827 - Revision of F136-13(2021)e1 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
- WK94828 - Revision of D2570-24 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
- WK94829 - Revision of F3295-18 Standard Guide for Impingement Testing of Total Disc Prostheses
- WK94830 - Revision of F2423-11(2020) Standard Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
- WK94831 - Revision of D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
- WK94836 - Revision of D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
- WK94838 - Revision of D6210-17 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
- WK94839 - Revision of D5752-10(2017) Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
- WK94840 - Revision of B777-15(2020) Standard Specification for Tungsten Base, High-Density Metal
- WK94841 - Revision of B348/B348M-21 Standard Specification for Titanium and Titanium Alloy Bars and Billets
- WK94842 - Revision of D7484-23a Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
- WK94843 - Revision of F912-11(2017) Standard Specification for Alloy Steel Socket Set Screws
- WK94844 - New Test Method for Specific Gravity and Density of Semi-Solid Asphalt Materials (Helium Pycnometer Method)
- WK94845 - Revision of F3046-21 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)
- WK94846 - Withdrawal of D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
- WK94847 - Revision of F1813-21 Standard Specification for Wrought Titanium-12Molybdenum-6Zirconium-2Iron Alloy for Surgical Implant (UNS R58120)
- WK94848 - Revision of E92-23 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials
- WK94849 - New Specification for Standard Specification for Strength Grade 6, 7, and 8 Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors
- WK94850 - New Specification for Standard Specification for Strength Grade 6, 7, and 8 Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors
- WK94851 - Revision of E246-21 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry
- WK94852 - Revision of E247-21 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry
- WK94853 - Revision of E3428-25 Standard Guide for Selecting and Using (Rapid) Sensory Characterization Methods
- WK94862 - Revision of D8071-21 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- WK94864 - Revision of D8267-24 Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- WK94866 - Revision of D8368-22a Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)
- WK94867 - Revision of D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)
- WK94868 - Revision of A358/A358M-24a Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
- WK94869 - Revision of E7-22 Standard Terminology Relating to Metallography
- WK94874 - Reinstatement of D6760-16 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing (Withdrawn 2025)
- WK94875 - Reinstatement of D7070-16 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature (Withdrawn 2025)
- WK94876 - Revision of D883-25 Standard Terminology Relating to Plastics
- WK94877 - Withdrawal of C196-00(2019) Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
- WK94878 - Revision of D8357-21 Standard Classification for Cannabis/Hemp Flower Vaporizers
- WK94879 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK94880 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK94881 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK94882 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK94883 - Revision of D1655-24b Standard Specification for Aviation Turbine Fuels
- WK94884 - Revision of D6424-04a(2019) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines
- WK94885 - Revision of D6812-04a(2019) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines
- WK94886 - Revision of D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels
- WK94887 - Revision of D5006-24 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
- WK94888 - Revision of D7566-24d Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK94889 - Revision of D7566-24d Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
- WK94892 - Revision of A146-04(2019) Standard Specification for Molybdenum Oxide Products
- WK94893 - New Test Method for Determination of boric acid in Wet Blue
- WK94894 - Revision of A494/A494M-24 Standard Specification for Castings, Nickel and Nickel Alloy
- WK94895 - Revision of A252/A252M-19 Standard Specification for Welded and Seamless Steel Pipe Piles
- WK94896 - Revision of E251-20a Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
- WK94897 - New Specification for Standard Specification for Polyethylene (PE) Mechanical Joint (MJ) Adapter
- WK94899 - Revision of D5505-14(2020) Standard Practice for Classifying Emulsified Recycling Agents
- WK94900 - Revision of D6338-17 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
- WK94901 - Revision of A106/A106M-19a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
- WK94902 - Revision of E1142-25 Standard Terminology Relating to Thermophysical Properties
- WK94903 - New Test Method for Retained Asphalt Coating of Asphalt Mixture
- WK94904 - Revision of D883-25 Standard Terminology Relating to Plastics
- WK94905 - Revision of A334/A334M-04a(2021) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
- WK94912 - Revision of G47-22 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
- WK94913 - Revision of B166-24 Standard Specification for Nickel-Chromium-Aluminum Alloy, Nickel-Chromium-Iron Alloys, Nickel-Chromium-Cobalt-Molybdenum Alloy, Nickel-Iron-Chromium-Tungsten Alloy, and Nickel-Chromium-Molybdenum-Copper Alloy Rod, Bar, and Wire
- WK94922 - Revision of A420/A420M-24a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
- WK94923 - Revision of F150-06(2018) Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
- WK94924 - Revision of D5102/D5102M-24 Standard Test Methods for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
- WK94925 - Revision of E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
- WK94926 - Revision of F668-17(2022) Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
- WK94927 - Revision of E1300-24 Standard Practice for Determining Load Resistance of Glass in Buildings
- WK94932 - Revision of D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers
- WK94933 - Revision of A420/A420M-24a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
- WK94934 - New Practice for Standard Practice for Performance Evaluation of Particulate Matter (PM) Sensor Systems for Occupational Health and Industrial Hygiene Applications
- WK94935 - New Practice for Combustion of Coal by Oxygen Vessel Combustion and Preparation of Vessel Rinse Solutions for Analysis of Total Chlorine and Fluoride
- WK94936 - New Test Method for Determination of Total Chlorine and Total Fluorine by Ion Chromatography in Vessel Rinse Solutions Obtained from Coal Oxidized by Oxygen Vessel Combustion
- WK94937 - Revision of A924/A924M-22a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- WK94938 - Revision of F2057-23 Standard Safety Specification for Clothing Storage Units
- WK94939 - New Test Method for Evaluation of the Load-Carrying Properties of Lubricants Used in Hypoid Final-Drive Axles Operated Under of High Speed and Shock Loading Conditions
- WK94940 - Revision of A1031/A1031M-12(2017) Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
- WK94941 - New Test Method for Horizontal and Vertical Exterior Vents Exposed to Flame
- WK94942 - Reinstatement of E3033-16 Standard Guide for Beneficial Use of Landfills and Chemically Impacted Sites (Withdrawn 2025)
- WK94947 - Revision of D8111-25 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine
- WK94948 - Revision of D3759/D3759M-05(2019) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
- WK94949 - Revision of D3815/D3815M-05(2019) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
- WK94950 - Revision of D3833/D3833M-96(2019) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
- WK94951 - Revision of D5105-05(2019) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
- WK94952 - Revision of D5375/D5375M-98(2019) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
- WK94953 - Revision of G181-21 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
- WK94955 - Revision of C270-25 Standard Specification for Mortar for Unit Masonry
- WK94956 - Revision of D228/D228M-21 Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
- WK94957 - Revision of B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus
- WK94958 - Revision of C595/C595M-24 Standard Specification for Blended Hydraulic Cements
- WK94959 - New Specification for the Minimum Quality of Precision Fermented, Semi-Synthetic, and Synthetic Cannabinoids to be Sold into a Legal Market
- WK94960 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK94961 - Revision of F2959-24 Standard Practice for Aerial Adventure Courses
- WK94962 - Revision of D5704-24 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
- WK94963 - Revision of C595/C595M-24 Standard Specification for Blended Hydraulic Cements
- WK94964 - Revision of C1523-17(2025) Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
- WK94965 - Revision of B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus
- WK94966 - Revision of D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
- WK94967 - Revision of D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending
- WK94968 - New Test Method for Defining the Printability Zone of Manually Fed Extrusion Printers
- WK94969 - Reinstatement of D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force (Withdrawn 2025)
- WK94979 - Withdrawal of A636-08(2018) Standard Specification for Nickel Oxide Sinter
- WK94983 - Revision of E1871-17 Standard Guide for Serving Protocol for Sensory Evaluation of Foods and Beverages
- WK94984 - Revision of A370-24a Standard Test Methods and Definitions for Mechanical Testing of Steel Products
- WK94986 - Withdrawal of B464/B464M-15(2020) Standard Specification for Welded UNS N08020 Alloy Pipe
- WK94987 - Revision of F2057-23 Standard Safety Specification for Clothing Storage Units
- WK94988 - Withdrawal of B599-20 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy Plate, Sheet, and Strip
- WK94989 - Withdrawal of B463-21 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip
- WK94990 - Revision of C1930-24 Standard Test Method for Determination of Slurry Flow Rate of Fresh Glass Fiber Reinforced Concrete
- WK94992 - Revision of F2291-25 Standard Practice for Design of Amusement Rides and Devices
- WK94993 - Revision of F770-24 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- WK94994 - New Practice for the field dimensional measurements of resilient floor tiles and planks.
- WK95008 - New Practice for the measurement of subfloor flatness to receive resilient floor coverings.
- WK95016 - Revision of D8036-16(2025)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI
- WK95017 - Reinstatement of D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers (Withdrawn 2025)
- WK95018 - Revision of F3191-23 Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
- WK95019 - Revision of D1412/D1412M-20 Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30?°C
- WK95020 - Revision of E329-23 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
- WK95021 - Revision of E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials
- WK95022 - Revision of C1895-20 Standard Test Method for Determination of Mohs Scratch Hardness
- WK95023 - Revision of A350/A350M-24b Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
- WK95024 - New Terminology for Supply Chain Locations
- WK95025 - Revision of C1787-23 Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications
- WK95026 - Revision of F2238-20 Standard Test Method for Performance of Rapid Cook Ovens
- WK95037 - Revision of D5905-98(2018) Standard Practice for the Preparation of Substitute Wastewater
- WK95039 - Revision of F3206-17 Standard Guide for Assessing Medical Device Cytocompatibility with Delivered Cellular Therapies
- WK95040 - Revision of B774/B774M-21 Standard Specification for Low Melting Point Alloys and Solders
- WK95041 - Revision of F541-12(2020) Standard Specification for Alloy Steel Eyebolts
- WK95042 - Revision of D8347-21a Standard Guide for Requirements for Analytical Laboratory Related Professions Within the Cannabis and Hemp Industries
- WK95043 - Revision of F3261-20 Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
- WK95048 - Revision of E2161-23c Standard Terminology Relating to Performance Validation in Thermal Analysis and Rheology
- WK95049 - Revision of C1227-24 Standard Specification for Precast Concrete Septic Tanks
- WK95050 - Revision of A181/A181M-23 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
- WK95051 - Revision of D4444-13(2018) Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
- WK95055 - Revision of B557-15(2023) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- WK95056 - Revision of B557M-15(2023) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
- WK95057 - Revision of B557-15(2023) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
- WK95058 - Revision of B557M-15(2023) Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)
- WK95068 - Revision of A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing
- WK95069 - Revision of C11-24a Standard Terminology Relating to Gypsum and Related Building Materials and Systems
- WK95070 - Revision of C1156-18 Standard Guide for Establishing Calibration for a Measurement Method Used to Analyze Nuclear Fuel Cycle Materials
- WK95071 - New Test Method for Determining the Depth of Water Penetration into Concrete Subject to Hydrostatic Conditions
- WK95072 - Revision of D1492-21 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
- WK95073 - Revision of D5776-21 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
- WK95074 - New Specification for Permeability-Reducing Admixtures for Concrete
- WK95075 - New Test Method for Determining Compatibility of Firestop Materials on Piping
- WK95076 - Revision of D8373-21 Standard Guide for Cannabis/Hemp Flower Vaporizers
- WK95077 - Revision of D4284-12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry
- WK95078 - Revision of F2291-25 Standard Practice for Design of Amusement Rides and Devices
- WK95079 - Revision of F3222-16(2025) Standard Terminology Relating to F32 Land Search and Rescue Standards and Guides
- WK95080 - Revision of C424-93(2024) Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
- WK95081 - Revision of E21-20 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials
- WK95082 - Revision of D7195-21 Standard Guide for Setting Object Color Specifications
- WK95084 - Revision of B438-21 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
- WK95085 - Revision of B439-21 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)
- WK95086 - Revision of F512-19(2024) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
- WK95087 - Revision of E313-20 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
- WK95089 - Revision of E23-25 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
- WK95090 - Revision of D1401-21 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids
- WK95091 - Revision of F2376-24 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
- WK95092 - New Guide for Visual Inspection of Stormwater Control Measures
- WK95093 - Withdrawal of B468-10(2020) Standard Specification for Welded UNS N08020 Alloy Tubes
- WK95094 - Revision of A234/A234M-24 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
- WK95095 - Revision of A858/A858M-24 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
- WK95096 - Revision of A860/A860M-24a Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
- WK95098 - Revision of D8346-21a Standard Guide for Requirements for Quality Related Professions Within the Cannabis and Hemp Industries
- WK95099 - Revision of E1627-19 Standard Practice for Sensory Evaluation of Edible Oils and Fats
- WK95100 - Revision of F2838-17 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
- WK95101 - Revision of B637-25 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
- WK95103 - Revision of B512-20 Standard Specification for Nickel-Chromium-Silicon Alloy Billets and Bars
- WK95104 - Revision of B511/B511M-21 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes
- WK95105 - Revision of B726-02(2021) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube
- WK95106 - Revision of B751-21 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube
- WK95107 - Revision of E2717-18 Standard Practice for Estimating the Environmental Load of Residential Wastewater
- WK95111 - Revision of F2075-20 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
- WK95112 - New Test Methods for Flammability of Rigid Plastic Materials Used for Electrical Insulation
- WK95114 - New Specification for Accelerating Rate Calorimeter
- WK95115 - Revision of A564/A564M-19a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
- WK95116 - Revision of D4643-17 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating
- WK95117 - Revision of B69-21 Standard Specification for Rolled Zinc
- WK95118 - Revision of B327-21 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
- WK95119 - Revision of B440-12(2021) Standard Specification for Cadmium
- WK95120 - Revision of B792-16(2021) Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
- WK95121 - Revision of B793-16(2021) Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
- WK95122 - Revision of B997-16(2021) Standard Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings
- WK95123 - Revision of B338-17(2021) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers
- WK95124 - Revision of B381-21 Standard Specification for Titanium and Titanium Alloy Forgings
- WK95125 - Revision of C1765-25 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
- WK95126 - Revision of C1946-25 Standard Test Method for Determination of Glass-Fiber Roving Chopping Rate for Glass Fiber Reinforced Concrete
- WK95127 - Revision of D5060-12(2021)e1 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography
- WK95128 - Revision of D5135-21 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography
- WK95129 - New Test Method for Strength of Fiber Reinforced Polymer (FRP) L-shape Bent Bar
- WK95130 - Revision of D2234/D2234M-20 Standard Practice for Collection of a Gross Sample of Coal
- WK95132 - New Test Method for Wind Resistance of Steep Slope Hip & Ridge Asphalt Roofing Shingles
- WK95133 - Revision of F3474-20 Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
- WK95134 - Revision of F3518-21 Standard Guide for Quantitative Measures for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
- WK95135 - Revision of F3519-21 Standard Guide for Establishing a Reporting Structure for Exoskeleton Analysis
- WK95141 - Revision of E2368-24 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
- WK95142 - Revision of E2368-24 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing
- WK95143 - Revision of C1170/C1170M-20 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
- WK95144 - Revision of F1236-25 Standard Guide for Visual Inspection of Electrical Protective Rubber Products
- WK95145 - Revision of A751-21 Standard Test Methods and Practices for Chemical Analysis of Steel Products
- WK95146 - Revision of C146-21 Standard Test Methods for Chemical Analysis of Glass Sand
- WK95147 - Revision of F3574-22 Standard Test Methods for Sacroiliac Joint Fusion Devices
- WK95148 - Revision of F799-19 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
- WK95149 - Revision of E284-22 Standard Terminology of Appearance
- WK95150 - New Test Method for Privacy Metric
- WK95151 - Revision of F3347-23 Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
- WK95152 - Revision of F3348-23a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
- WK95155 - New Test Method for Measuring the Cooling Power, After-Chill and Thermal Buffering of Clothing Materials Using a Sweating Hot Plate
- WK95156 - Revision of C612-14(2019) Standard Specification for Mineral Fiber Block and Board Thermal Insulation
- WK95157 - New Guide for A recommended stability testing protocol to estimate cannabinoid beverage shelf life
- WK95158 - Revision of C1485-19 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
- WK95161 - Revision of A941-25a Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
- WK95166 - Revision of D8080-24 Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel
- WK95167 - Revision of D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14
- WK95169 - Revision of A573/A573M-20 Standard Specification for Structural Carbon Steel Plates
- WK95170 - Revision of A213/A213M-24 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
- WK95171 - Revision of A6/A6M-24b Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- WK95172 - New Test Method for Detection of microbial contamination in fuel and fuel- associated water samples by measuring carbohydrate content using lateral flow devices
- WK95178 - Revision of D7524-20 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method
- WK95180 - Withdrawal of D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)
- WK95181 - Revision of D6825-21 Standard Guide for Placement of Riprap Revetments
- WK95186 - Revision of D883-25 Standard Terminology Relating to Plastics
- WK95191 - Revision of E1952-23 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
- WK95192 - Revision of B848/B848M-21 Standard Specification for Powder Forged (PF) Ferrous Materials
- WK95193 - Revision of B853-16(2021)e1 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components
- WK95194 - Revision of B761-17(2021) Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation
- WK95195 - Revision of C1616-07(2018) Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
- WK95196 - Revision of F1696-20 Standard Test Method for Energy Performance of Stationary-Rack, Door-Type Commercial Dishwashing Machines
- WK95198 - Revision of E991-21 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
- WK95199 - Revision of A6/A6M-24b Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
- WK95200 - Revision of F3044-20 Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
- WK95201 - Revision of E1820-25a Standard Test Method for Measurement of Fracture Toughness
- WK95202 - Revision of D1357-95(2019) Standard Practice for Planning the Sampling of the Ambient Atmosphere
- WK95212 - Revision of E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus
- WK95214 - Withdrawal of A1024/A1024M-18 Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
- WK95215 - New Test Method for Additive Manufacturing - Determination of Flexural Strength of Additively Constructed Concrete and Mortar
- WK95216 - New Test Method for Additive Manufacturing - Determination of interlayer Bond Strength of Additively Constructed Concrete and Mortar by Splitting Tensile Method
- WK95220 - Revision of D7028-07(2024) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
- WK95222 - Revision of F2028-17 Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
- WK95223 - Revision of F3478-20 Standard Practice for Development of a Durability and Reliability Flight Demonstration Program for Low-Risk Unmanned Aircraft Systems (UAS) under FAA Oversight
- WK95224 - Revision of D8565-24 Standard Specification for Glycol-Based Coolants for Fuel Cell Electric Vehicles
- WK95225 - Revision of D8566-24 Standard Specification for Glycol-Based Electric Vehicle Coolant with Low Electrical Conductivity
- WK95226 - Revision of C1297-18 Standard Guide for Qualification of Laboratory Analysts for the Analysis of Nuclear Fuel Cycle Materials
- WK95227 - Revision of C59/C59M-00(2020) Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
- WK95232 - Revision of C1854-17 Standard Test Method for Determination of Hydrogen (total from all sources) in Mixed Oxide ((U, Pu)O2) Sintered Pellets by the Inert Gas Fusion Technique Followed by Thermal Conductivity Measurement
- WK95233 - Revision of C1853-17 Standard Test Method for The Determination of Carbon (Total) Content in Mixed Oxide ((U, Pu)O2) Sintered Pellets by Direct Combustion-Infrared Detection Method
- WK95234 - Revision of D2732-14(2020) Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
- WK95235 - Revision of C1045-19 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
- WK95236 - Revision of F3763-25 Standard Test Method for Measuring the Evaporation Rate of Oils and Petroleum
- WK95237 - Revision of E2174-24 Standard Practice for On-Site Inspection of Installed Firestop Systems
- WK95238 - Revision of E2923-24 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
- WK95239 - Revision of F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications
- WK95240 - New Practice for Drone Show Operations
- WK95241 - Revision of E2393-24 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
- WK95242 - New Specification for Cooperative Detect and Avoid System Requirements
- WK95243 - Revision of F3125/F3125M-25 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi, 144 ksi, and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- WK95244 - Revision of F3125/F3125M-25 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi, 144 ksi, and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
- WK95245 - New Guide for Determination of Bacterial Endotoxin on Single Use Systems and Components
- WK95246 - Revision of A1039/A1039M-20 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
- WK95248 - Revision of C1047-19 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
- WK95252 - Revision of D8257/D8257M-22 Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing
- WK95254 - Revision of C1289-25 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
- WK95255 - Revision of B251/B251M-17 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
- WK95257 - Revision of D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography
- WK95258 - Revision of E1820-25a Standard Test Method for Measurement of Fracture Toughness
- WK95259 - Revision of D3230-19 Standard Test Method for Salts in Crude Oil (Electrometric Method)
- WK95260 - Revision of E1251-24 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
- WK95261 - Revision of G170-24 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
- WK95262 - Revision of A918-06(2019) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- WK95263 - Revision of G205-23 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
- WK95264 - Revision of A917-08(2020) Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
- WK95265 - Revision of E1820-25a Standard Test Method for Measurement of Fracture Toughness
- WK95267 - Revision of E3318-24a Standard Terminology for Standards Relating to Stormwater Control Measures
- WK95269 - Revision of F656-21 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
- WK95270 - New Test Method for AI-Powered IDEAL-E* Test
- WK95276 - New Practice for Risk Assessment of the Effects of Climate Change and Extreme Weather Events on Plastic Pipes and Drainage Structures
- WK95278 - Revision of D6865-17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
- WK95279 - Revision of D93-25 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
- WK95280 - Revision of E1820-25a Standard Test Method for Measurement of Fracture Toughness
- WK95281 - Revision of C1814/C1814M-20 Standard Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
- WK95282 - Revision of A1077/A1077M-21 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
- WK95283 - Revision of D613-25 Standard Test Method for Cetane Number of Diesel Fuel Oil
- WK95284 - Revision of D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
- WK95285 - Revision of D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
- WK95289 - Revision of F1487-25 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK95290 - Revision of C1077-25 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
- WK95291 - Revision of F1487-25 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK95292 - Revision of F1487-25 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK95293 - Revision of F1487-25 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK95294 - Revision of D7879-13(2018) Standard Test Method for Determining Flax Fiber Widths Using Image Analysis
- WK95295 - Revision of F1487-25 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK95296 - Revision of F1487-25 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
- WK95297 - Revision of A529/A529M-19 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
- WK95298 - Revision of E1921-25 Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range
- WK95300 - Revision of F683-23a Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
- WK95302 - Revision of E2998-25 Standard Practice for Identification and Classification of Smokeless Powder
- WK95303 - Revision of E2999-25 Standard Test Methods for Analysis of Organic Compounds in Smokeless Powder by Gas Chromatography-Mass Spectrometry and Fourier Transform Infrared Spectroscopy
- WK95304 - Reinstatement of E3064-16 Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose (Withdrawn 2025)
- WK95305 - Revision of F14-80(2019) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
- WK95306 - Revision of F144-80(2019) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
- WK95307 - Revision of A842-11A(2022)e1 Standard Specification for Compacted Graphite Iron Castings
- WK95308 - Revision of D5753-18 Standard Guide for Planning and Conducting Geotechnical Borehole Geophysical Logging
- WK95311 - Revision of D3690-19 Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics—Indoor
- WK95312 - Revision of F2088-24 Standard Consumer Safety Specification for Infant and Cradle Swings
- WK95316 - Revision of C897-15(2020) Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
- WK95317 - Revision of E1820-25a Standard Test Method for Measurement of Fracture Toughness
- WK95318 - Revision of E2465-24 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry
- WK95319 - New Test Methods for Large Scale Evaluation of Temporary Sediment Control Devices
- WK95320 - Revision of E2470-22 Standard Specification for Polyester Grade Ethylene Glycol
- WK95321 - Revision of D2513-24e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
- WK95322 - Revision of D2564-20(2024) Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
- WK95323 - Revision of E3379-25 Standard Guide for Critical Airflow Visualization
- WK95324 - Revision of F1169-19 Standard Consumer Safety Specification for Full-Size Baby Cribs
- WK95325 - Revision of F406-24 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
- WK95326 - Revision of D6037-21 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
- WK95327 - Revision of E177-20 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
- WK95328 - Revision of D5899-24 Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems
- WK95329 - Revision of D8311-20 Standard Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization
- WK95334 - Revision of D3666-24 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
- WK95335 - Revision of C1710-24 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
- WK95336 - Revision of F770-24 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
- WK95337 - Revision of D4546-21 Standard Test Methods for One-Dimensional Swell or Collapse of Soils
- WK95338 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK95339 - Revision of E1823-24c Standard Terminology Relating to Fatigue and Fracture Testing
- WK95340 - Revision of D7240-18 Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test)
- WK95341 - Revision of E3247-20 Standard Test Method for Measuring the Size of Nanoparticles in Aqueous Media Using Dynamic Light Scattering
- WK95342 - Revision of D2774-21a Standard Practice for Underground Installation of Thermoplastic Pressure Piping
- WK95343 - Revision of C270-25 Standard Specification for Mortar for Unit Masonry
- WK95344 - Revision of D7115-20 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
- WK95345 - Revision of D6365-99(2018) Standard Practice for Nondestructive Testing of Geomembrane Seams Using the Spark Test
- WK95346 - New Test Method for Differential quantification of stem cells in samples of isolated postnatal vertebrate tissue cells
- WK95347 - Revision of D1067-16(2024) Standard Test Methods for Acidity or Alkalinity of Water
- WK95348 - Revision of D8375-23 Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
- WK95349 - Revision of D6766-20a Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions
- WK95351 - Revision of D4841-88(2018) Standard Practice for Estimation of Holding Time for Water Samples Containing Organic and Inorganic Constituents
- WK95352 - Revision of D4840-99(2018)e1 Standard Guide for Sample Chain-of-Custody Procedures
- WK95353 - Revision of D6693/D6693M-20(2024) Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
- WK95354 - Revision of D5994/D5994M-10(2021) Standard Test Method for Measuring Core Thickness of Textured Geomembranes
- WK95355 - Revision of D7760-18 Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
- WK95356 - Revision of D7762-18e1 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
- WK95357 - Revision of D7765-18a Standard Practice for Use of Foundry Sand in Structural Fill and Embankments
- WK95358 - Revision of D8012-18 Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications
- WK95361 - Revision of D1143/D1143M-20e1 Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
- WK95362 - Revision of D3689/D3689M-22 Standard Test Methods for Deep Foundation Elements Under Static Axial Tensile Load
- WK95363 - Revision of E114-20 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing
- WK95365 - Revision of D3939/D3939M-13(2017) Standard Test Method for Snagging Resistance of Fabrics (Mace)
- WK95366 - Revision of D5278/D5278M-09(2017) Standard Test Method for Elongation of Narrow Elastic Fabrics (Static-Load Testing)
- WK95367 - Revision of D5362-13(2018) Standard Test Method for Snagging Resistance of Fabrics (Bean Bag)
- WK95369 - Revision of D6596-00(2021) Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials
- WK95371 - Revision of C172/C172M-17 Standard Practice for Sampling Freshly Mixed Concrete
- WK95372 - Revision of D4964-96(2020) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
- WK95373 - Revision of D3180-15(2023) Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases
- WK95374 - Revision of B811-13(2022)e1 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
- WK95375 - Revision of E2579-23b Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
- WK95376 - Withdrawal of D4602-93(2020) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
- WK95377 - Revision of G169-01(2021) Standard Guide for Application of Basic Statistical Methods to Weathering Tests
- WK95378 - Revision of G141-09(2021) Standard Guide for Addressing Variability in Exposure Testing of Nonmetallic Materials
- WK95379 - Revision of D7869-17(2025) Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings
- WK95380 - Revision of D662-93(2019) Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
- WK95381 - Revision of C232/C232M-21 Standard Test Method for Bleeding of Concrete
- WK95382 - Revision of C232/C232M-21 Standard Test Method for Bleeding of Concrete
- WK95383 - Revision of C232/C232M-21 Standard Test Method for Bleeding of Concrete
- WK95384 - Revision of C232/C232M-21 Standard Test Method for Bleeding of Concrete
- WK95385 - Revision of C232/C232M-21 Standard Test Method for Bleeding of Concrete
- WK95386 - Revision of C232/C232M-21 Standard Test Method for Bleeding of Concrete
- WK95387 - Revision of C1039-85(2020)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes
- WK95388 - Revision of C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite
- WK95389 - Revision of D662-93(2019) Standard Test Method for Evaluating Degree of Erosion of Exterior Paints
- WK95390 - Revision of D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter
- WK95391 - New Specification for Commercial Grade High Assay Low Enriched Uranium Metal
- WK95395 - Revision of D3350-24 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
- WK95396 - Revision of C1620-16(2023) Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
- WK95397 - Revision of D6661-17 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
- WK95398 - Revision of C31/C31M-25a Standard Practice for Making and Curing Concrete Test Specimens in the Field
- WK95399 - New Test Method for Assessment of Coated Specimens Exposed to Corrosive Environments Utilizing the Center Punch Method
- WK95402 - Revision of D8-22a Standard Terminology Relating to Materials for Roads and Pavements
- WK95403 - Revision of D8-22a Standard Terminology Relating to Materials for Roads and Pavements
- WK95404 - Revision of D8-22a Standard Terminology Relating to Materials for Roads and Pavements
- WK95405 - Revision of F2291-25 Standard Practice for Design of Amusement Rides and Devices
- WK95406 - Revision of C94/C94M-25 Standard Specification for Ready-Mixed Concrete
- WK95407 - Revision of C94/C94M-25 Standard Specification for Ready-Mixed Concrete
- WK95408 - Revision of C94/C94M-25 Standard Specification for Ready-Mixed Concrete
- WK95409 - Revision of C270-25 Standard Specification for Mortar for Unit Masonry
- WK95410 - Revision of D7832/D7832M-24 Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)
- WK95411 - Revision of F1488-25 Standard Specification for Coextruded Composite Pipe
- WK95412 - Revision of D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
- WK95413 - Revision of D127-19 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum
- WK95414 - Revision of D937-07(2019) Standard Test Method for Cone Penetration of Petrolatum
- WK95415 - Revision of D1833-87(2017) Standard Test Method for Odor of Petroleum Wax
- WK95416 - Revision of D8143-24e1 Standard Test Method for Determination of the EU-11 List of PAH Compounds in Carbon Black
- WK95417 - Revision of C1928/C1928M-25 Standard Test Method for Compressive Strength of Alkali Activated Cementitious Material Mortars (Using 50?mm [2?in.] Cube Specimens)
- WK95418 - Revision of D1632-17e1 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
- WK95419 - Revision of D4304-22 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines
- WK95420 - Revision of E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array
- WK95421 - Revision of E1354-25 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
- WK95426 - Revision of D1633-17 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
- WK95430 - Revision of C131/C131M-20 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
- WK95431 - Revision of C70-20 Standard Test Method for Surface Moisture in Fine Aggregate
- WK95432 - Revision of E2924-14(2020) Standard Practice for Intumescent Coatings
- WK95433 - Revision of F1939-15(2020) Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating
- WK95434 - New Terminology for Intoxication and related words applied to human experience
- WK95435 - Revision of D2699-24b Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
- WK95436 - Revision of D2700-24c Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
- WK95437 - New Practice for Preparation and Verification of Aqueous Radionuclide Working Standards
- WK95438 - Revision of E2339-21 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)
- WK95439 - Revision of C1271-99(2020) Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
- WK95441 - Withdrawal of F3103-14(2019) Standard Specification for Testing Off-Road Motorcycle and ATV Helmets
- WK95444 - Revision of E2989-19a(2024) Standard Guide for Assessment of Continued Applicability of Reaction to Fire Test Reports Used in Building Regulation
- WK95446 - Revision of C1318-15a(2020) Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
- WK95447 - Revision of D3551-17 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
- WK95448 - New Test Method for Detection of Hydraulic Oil and Polyalphaolefin (PAO) based coolants in jet fuel using Raman spectroscopy
- WK95449 - Revision of D6460-24 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
- WK95450 - Revision of D6103/D6103M-17e1 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
- WK95452 - New Specification for Preform Thermoplastic Test Methods and Property Limits
- WK95453 - Revision of D6287-17 Standard Practice for Cutting Film and Sheeting Test Specimens
- WK95454 - Revision of D4829-21 Standard Test Method for Expansion Index of Soils
- WK95455 - Revision of D6243/D6243M-20 Standard Test Method for Determining the Internal and Interface Shear Strength of Geosynthetic Clay Liner by the Direct Shear Method
- WK95456 - Revision of C216-24 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
- WK95457 - Revision of C1948/C1948M-24 Standard Specification for Alkali-Activated Cementitious Materials
- WK95460 - Revision of C1714/C1714M-24 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
- WK95462 - Revision of D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins
- WK95463 - Withdrawal of D5534-94(2018) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
- WK95464 - Revision of C1874-20 Standard Test Method for Measuring Rheological Properties of Cementitious Materials Using Coaxial Rotational Rheometer
- WK95465 - Revision of C1437-20 Standard Test Method for Flow of Hydraulic Cement Mortar
- WK95466 - Revision of D2699-24b Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel
- WK95467 - Revision of D2700-24c Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel
- WK95469 - New Test Method for evaluation the performance of screens in protecting windows and doors
- WK95470 - New Test Method for measurement of gradient magnetic field induced heating on or near non-active implants during magnetic resonance imaging
- WK95475 - Revision of D6142-21 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography
- WK95476 - Revision of C188-25 Standard Test Method for Density of Hydraulic Cement
- WK95477 - New Test Method for Evaluating the vulnerability of decks to embers
- WK95478 - Reinstatement of D5856-15 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter (Withdrawn 2024)
- WK95479 - Revision of D3160-20a Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (a–Methylstyrene)
- WK95480 - Revision of D6367-21 Standard Specification for AMS (a-Methylstyrene)
- WK95481 - Revision of C898/C898M-25 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with Separate Wearing Course
- WK95482 - Revision of D4128-18 Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry
- WK95483 - New Guide for determining and reporting the water content of coal combustion products for beneficial use
- WK95484 - Revision of D2439-20 Standard Specification for Refined Phenol
- WK95486 - Revision of D7099-04(2018) Standard Terminology Relating to Frozen Soil and Rock
- WK95487 - New Guide for Measurement of Gas Permeability in Graphite under Steady Flow
- WK95488 - Withdrawal of C560-20 With Replacement D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
- WK95489 - Revision of B392-18 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire
- WK95490 - Revision of C216-24 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
- WK95491 - Revision of F880-24 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
- WK95492 - Revision of E1587-25 Standard Test Methods for Chemical Analysis of Refined Nickel
- WK95493 - Withdrawal of C816-15(2020)e1 With Replacement D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)
- WK95494 - Withdrawal of C769-15(2020)e1 With Replacement D8356-20 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio
- WK95496 - Revision of E2738-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods
- WK95497 - Revision of D7775-21 Standard Guide for Measurements on Small Graphite Specimens
- WK95498 - Revision of D8075-16(2021) Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite
- WK95499 - Revision of B42-20 Standard Specification for Seamless Copper Pipe, Standard Sizes
- WK95500 - Revision of B43-20 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
- WK95501 - Revision of B360-20 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications
- WK95504 - Revision of D2619-21 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)
- WK95505 - Reinstatement of D2758-94(2009) Standard Test Method for Engine Coolants by Engine Dynamometer (Withdrawn 2022)
- WK95506 - Reinstatement of D4083-89(2016) Standard Practice for Description of Frozen Soils (Visual-Manual Procedure) (Withdrawn 2025)
- WK95507 - Revision of D8327-24 Standard Test Method for Measuring the Permeability of Powders as a Function of Consolidation Using the Freeman Technology FT4 Powder Rheometer
- WK95509 - Revision of D5950-14(2020) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
- WK95510 - Revision of D5985-02(2020) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)
- WK95511 - Revision of D6892-03(2020) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)
- WK95512 - Revision of D6417-25 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography
- WK95513 - Revision of D665-24 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water
- WK95514 - Reinstatement of D4220/D4220M-14 Standard Practices for Preserving and Transporting Soil Samples (Withdrawn 2023)
- WK95515 - Withdrawal of D7666-12(2019) Standard Specification for Triglyceride Burner Fuel
- WK95516 - Revision of C1232-24a Standard Terminology for Masonry
- WK95517 - Revision of C1232-24a Standard Terminology for Masonry
- WK95518 - Revision of C270-25 Standard Specification for Mortar for Unit Masonry
- WK95519 - Revision of D7279-20 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
- WK95520 - Revision of D2070-24a Standard Test Method for Thermal Stability of Hydraulic Oils
- WK95521 - Revision of F3363-19 Standard Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
- WK95522 - Revision of E1067/E1067M-18 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels
- WK95523 - Revision of F3363-19 Standard Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
- WK95524 - Revision of E1930/E1930M-17 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission
- WK95525 - Revision of C637-20 Standard Specification for Aggregates for Radiation-Shielding Concrete
- WK95526 - Revision of C638-20 Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
- WK95527 - Revision of E2863-17 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization
- WK95528 - Revision of F3363-19 Standard Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
- WK95529 - Revision of E2907/E2907M-13(2019) Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing
- WK95531 - Revision of E2983-14(2019) Standard Guide for Application of Acoustic Emission for Structural Health Monitoring
- WK95532 - Revision of A480/A480M-25a Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
- WK95533 - Revision of D3524-14(2020) Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography
- WK95536 - Revision of E108-25 Standard Test Methods for Fire Tests of Roof Coverings
- WK95537 - Revision of E108-25 Standard Test Methods for Fire Tests of Roof Coverings
- WK95538 - Revision of D2782-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)
- WK95539 - Revision of C1650-14(2021) Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
- WK95540 - Revision of D4172-21 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
- WK95541 - Revision of D2783-21 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)
- WK95542 - Revision of D5183-21a Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
- WK95549 - Revision of A1124/A1124M-24 Standard Specification for Textured Epoxy-Coated Steel Reinforcing Bars
- WK95550 - Revision of D7423-23 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
- WK95551 - New Guide for Nature Based Solutions for Urban Heat
- WK95552 - Revision of C1649-14(2021) Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
- WK95553 - New Classification for Cannabinoid Containing Consumer Products
- WK95555 - Revision of D3775-17(2023) Standard Test Method for End (Warp) and Pick (Filling) Count of Woven Fabrics
- WK95556 - New Test Method for Moisture Content Determination in Cannabis Flower and Hemp Flower
- WK95557 - Revision of A193/A193M-25 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
- WK95559 - Revision of D256-24 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
- WK95560 - Revision of D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene
- WK95563 - Revision of A320/A320M-24a Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
- WK95578 - Revision of F2506-22 Standard Specification for Design and Testing of Light Sport Aircraft Propellers
- WK95579 - Revision of E709-21 Standard Guide for Magnetic Particle Testing
- WK95585 - Revision of F480-14(2022) Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
- WK95586 - Revision of E1198-24 Standard Practice for Sampling Zooplankton with Pumps
- WK95592 - Withdrawal of D6674-01(2017) Standard Guide for Proficiency Test Program for Fabrics
- WK95594 - Revision of D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography
- WK95595 - Revision of A290/A290M-16(2021) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
- WK95596 - Revision of A291/A291M-19(2025) Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
- WK95597 - Revision of D8107-25 Standard Practice for Determining Sediment Pond Skimmer Flow Rate
- WK95600 - Revision of D6432-19 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
- WK95601 - Revision of D7897-18(2023) Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
- WK95602 - Revision of G218-19 Standard Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection
- WK95603 - Revision of F855-23 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment
- WK95604 - Revision of C1005-20 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in Physical Testing of Hydraulic Cements
- WK9715 - Revision of A1008/A1008M-05a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
- WK9820 - Revision of A510-03 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
