|
|
|
SEDL / STP / STP1114-EB
 |
STP1114
Elastic-Plastic Fracture Test Methods: The User's Experience (Second Volume)
Joyce JA
Pages: 351
Published: 1991
Other books in this series
|
|
Presents papers from experts who share their practical experiences with the testing of elastic plastic and fully plastic materials. 20 papers cover: • Experience with standard test methods • Suggestions for improvements and modifications • Possible redefinition of the limits of applicability • Applications to a range of materials including polymers
Table of Contents
Overview
Joyce J.
Experience with the Use of the New ASTM E 813-87
Van Der Sluys W., Wade C.
A Comparison of the J-lntegral and CTOD Parameters for Short Crack Specimen Testing
Dodds R., Rolfe S., Sorem W.
Normalization: An Experimental Method for Developing J-R Curves
Herrera R., Landes J., Lee K., Zhou Z.
Quantification of Engineering Limits to J Control of Ductile Crack Growth
Joyce J.
Specimen Size Requirements for Elastic-Plastic Crack Growth Resistance Curves
Gordon J., Jones R.
A Fracture Instability Data Qualification Limit
Hiser A., Macdonald B., Oberdick R.
Development of Eta Factors in Elastic-Plastic Fracture Testing Using a Load Separation Technique
Herrera R., Landes J., Sharobeam M.
Obtaining J-Resistance Curves Using the Key-Curve and Elastic Unloading Compliance Methods: An Integrity Assessment Study
John S.
Nonincremental Evaluation of Modified J-R Curve
Ohtsuka N.
Experience in Using Direct Current Electric Potential to Monitor Crack Growth in Ductile Metals
Landow M., Marschall C.
Analysis of Deformation Behavior During Plastic Fracture
Albrecht P., Hu J.
Fracture Toughness and Fatigue Crack Initiation Tests of Welded Precipitation-Hardening Stainless Steel
Farrara R., O'Hara G., Senick J., Underwood J., Zalinka J.
Experience with J Testing of Type 304/308 Stainless Steel Weldment
Graham S., Lloyd W., Reuter W.
Key-Curve Analysis of Linde 80 Welds
Lowe A., Van Der Sluys W., Yoon K.
Observations in Conducting J-R Curve Tests on Nuclear Piping Materials
Landow M., Marschall C.
Effect of Residual Stress on the J-R Curve of HY-100 Steel
Bar-On I., Gallant A., Tuler F.
Dynamic Fracture Toughness of Modified SA508C12 in the Ductile-to-Brittle Transition Region
Joyce J., Miglin M., Van Der Sluys W., Wade C.
The Application of the Multispecimen J-Integral Technique to Toughened Polymers
Huang D.
Fracture Toughness of Polycarbonate as Characterized by the J-Integral
Bernstein H.
Determination of JIc for Polymers Using the Single Specimen Method
Chung W., Williams J.
Author Index
Subject Index
Committee: E08
Paper ID: STP1114-EB
DOI: 10.1520/STP1114-EB
ISBN-EB: 978-0-8031-5172-7
 ASTM International is a member of CrossRef.
0-8031-1418-4
978-0-8031-1418-0
STP1114-EB
|
