SYMPOSIA PAPER Published: 01 January 1991
STP16850S

Development of Eta Factors in Elastic-Plastic Fracture Testing Using a Load Separation Technique

Source

A method for experimentally determining the eta (η) factor based on separation constants has been recently proposed. This method has two important implications for elastic plastic fracture toughness testing. First, the method can be used to determine the η factors for any new test specimen geometry which might be added to existing test standards. Such specimens as disk compact, arc bend, and arc tension are used in the KIc test standard. They can be added to the J based standards if the specimen calibrations are known, one being the η factor calibration. In this paper a step by step procedure is given describing η factor calibration for an arbitrary specimen geometry based on a series of blunt notched specimens.

The procedure proposed in this paper was then applied to existing blunt notch data for the traditional test specimen geometries, the compact, and single edge notched bend specimens. The results of the study show different values for η from these in the existing standards both in magnitude and trend with a/W. In addition they show a slight material sensitivity. The consequences of having incorrect η factors in the test standards are explored in a sensitivity study. These results are used to evaluate the importance of having correct η factors and recommendations are made.

Author Information

Sharobeam, MH
National University of Mar Del Plata, Knoxville, TN, Argentina
Landes, JD
National University of Mar Del Plata, Knoxville, TN, Argentina
Herrera, R
National University of Mar Del Plata, Knoxville, TN, Argentina
Price: $25.00
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Developed by Committee: E08
Pages: 114–132
DOI: 10.1520/STP16850S
ISBN-EB: 978-0-8031-5172-7
ISBN-13: 978-0-8031-1418-0