Standard Active Last Updated: May 17, 2023 Track Document
ASTM D3929-03(2023)

Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method

Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method D3929-03R23 ASTM|D3929-03R23|en-US Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method Standard new BOS Vol. 15.06 Committee D14
$ 69.00 In stock
ASTM International

Significance and Use

5.1 This test method is designed for obtaining a qualitative estimate of the compatibility of plastics and adhesives. Due to the many process variables associated with the fabrication of plastic parts, it is not possible to use this test as a substitute for compatibility tests on actual parts.

5.2 The detection of cracks or crazes may be determined with or without optical aid. Make comparisons only among tests employing crack detection methods of equivalent sensitivity.

Scope

1.1 This test method describes a procedure for determining the compatibility of adhesives with plastics based on whether the adhesive causes cracking of stressed samples.

1.2 Specimen configurations and test fixture designs are given.

1.3 This test method is suitable for products in the form of sheet or strip. It can also be used on injection molded tensile specimens or flexural bars.

1.4 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 15.06
Developed by Subcommittee: D14.40
Pages: 5
DOI: 10.1520/D3929-03R23
ICS Code: 83.080.01; 83.180