Standard Active Last Updated: Sep 26, 2023 Track Document
ASTM C488-16(2023)

Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation C0488-16R23 ASTM|C0488-16R23|en-US Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation Standard new BOS Vol. 04.06 Committee C16
$ 61.00 In stock
ASTM International

Significance and Use

5.1 Both physical and chemical changes possibly occur from weather exposure, and these changes affect performance properties, service life, and maintenance schedules. For this reason, tests of properties relating to performance shall be made both before and after specific periods of outdoor exposure.

5.2 This test method recognizes that differing geographical locations, environmental conditions, differences between surface temperatures and ambient temperatures, and test durations have extremely varied effects upon the test results.

5.3 This test method is to be used for comparative qualitative testing.

Scope

1.1 This test method covers out-of-doors exposure testing of finishes that are normally field-applied to thermal insulation and possibly include joints or joint sealants, or both. Such exposure is essential prior to the determination of certain physical properties when the finish is to be exposed to exterior weather conditions. This test method also indicates possible compatibility problems between the joint sealant and the finish as well as the ability of the finish to span a dry joint. This test method is not intended to evaluate mildew resistance, efflorescence, or chemical resistance.

Note 1: For testing free plastic films, see Practice D1435.

1.2 This test method does not prescribe the method of application, test duration, or inspection intervals.

1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 04.06
Developed by Subcommittee: C16.33
Pages: 3
DOI: 10.1520/C0488-16R23
ICS Code: 27.220