Standard Historical Last Updated: Mar 13, 2015 Track Document
ASTM A1080-14

Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings A1080-14 ASTM|A1080-14|en-US Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings Standard new BOS Vol. 01.02 Committee A01
$ 73.00 In stock

Significance and Use

4.1 The authorization or requirement for hot isostatic pressing (HIP) shall be agreed upon between purchaser and supplier and must be documented.

4.1.1 The Supplementary Requirements of the Common Requirements Specifications contain a section for authorization of hot isostatic pressing (HIP) of castings. These Common Requirements Specifications include, but are not limited to:

A703 Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

A781 Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A957 Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A985 Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts


4.2 The HIP processing parameters shall be as agreed upon between the purchaser and supplier.

4.3 When agreed between purchaser and supplier, HIP may be substituted for required thermal treatment provided all requirements for that treatment are met.

Abstract

This practice covers general requirements for Hot Isostatic Pressing (HIP) of steel, stainless steel, and related alloy castings. HIP is a solid state process which applies heat and pressure simultaneously to objects in an autoclave via an inert gas in such a way as to eliminate internal voids and obtain desired properties. Inert gas is a non-oxidizing gas used for pressurizing a HIP vessel. This practice deals with quality requirements, autoclave type/qualification, temperature uniformity, temperature measurement and control, pressure measurement and control, and gas measurement.

Scope

1.1 This practice covers general requirements for Hot Isostatic Pressing (HIP) of steel, stainless steel, and related alloy castings.

1.2 Units—The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.02
Developed by Subcommittee: A01.18
Pages: 3
DOI: 10.1520/A1080-14
ICS Code: 77.140.01