PTP Program

Hydraulic Fluids/Oils

2024 Annual Fee:
$1,089.00

Schedule: January, May, October
Sample amount distributed each test cycle: 1 gallon

Reduced Price

A2LA Accredited Symbol

Accredited Proficiency Testing Provider*

This program is accredited in accordance with the recognized International Standard ISO/IEC 17043: 2010 Conformity Assessment - General Requirements for Proficiency Testing, by the American Association for Laboratory Accreditation. Certificate Number: 4209.01

List of Programs and Scopes

About The Program

ASTM's Hydraulic Fluids and Oils Proficiency Testing Program provides laboratories who need a statistical quality assurance tool that will enable them to improve, and maintain a high level of performance in conducting routine ASTM tests by comparing their results with other laboratories worldwide.

As a program participant, you will receive either a commercial grade hydraulic fluid or oil plus test instructions for each test cycle. Your laboratory performs the tests that you normally conduct within your own facility using the specified ASTM methods cited in the program. Single determinations by each laboratory are required, as the program does not allow the reporting of averages of replicate determinations.

Upon completion of testing, each laboratory submits their own data on-line, electronically to ASTM for use in generating electronic statistical summary reports that contain:

  • Coded laboratory test results
  • Statistical analyses of test data
  • Charts plotting test results versus

Samples, test instructions and data report forms are distributed electronically to each participant on the date samples are distributed. Labs have approximately 8 weeks to submit test data with the final statistical summary reports being electronically distributed in approximately 25 business days.

For more information, contact us.

Why Should Your Laboratory Participate?

ASTM's Proficiency Test Program provides you with:

  • A useful and meaningful statistical quality assurance tool to monitor the strengths and weaknesses of your laboratory's performance in conducting testing.
  • The resource you need to satisfy proficiency testing elements of laboratory accreditation.
  • A periodic comparison of test results with other participating laboratories.

Should you have an issue with your published results, please write to ptp@astm.org with your lab number and account number.

Test Materials

Each participating lab will receive a one (1) gallon can containing either a commercial grade mineral oil, or a synthetic ester (HEES) or a water glycol hydraulic fluid. One product will be tested each test cycle.

Test Parameters By Test Cycle Product

Mineral Oil Testing

D664, D974

Acid Number

D3427

Air Release

D2896, D4739

Base Number

D130

Cu+ Corrosion

D5185, D4951

Elements by ICP

D92

Flash Point

D892

Foaming Characteristics

D97, D5949, D5950

Pour Point

D665

Rust Prevention

D2619

Stability, Hydrolytic

D2070

Thermal Stability

D445

Viscosity, Kin @40C & 100C

D1401

Water Separability

D2272

Oxidation Stability

Synthetic Ester Testing

D664, D974

Acid Number

D3427

Air Release

D2896

Base Number

D130

Cu+ Corrosion

D4052

Density

D5185, D4951

Elements by ICP

D92

Flash Point

D892

Foaming Characteristics

D2272

Oxidation Stability

D97, D5949, D5950

Pour Point

D665

Rust Prevention

D2619

Stability, Hydrolytic

D445

Viscosity, Kin @40C & 100C

D1401

Water Separability

Water Glycol Testing

E70

pH @ 25oC

D1121

Acid Number

D3427

Air Release

D130

Cu+ Corrosion

D6130

Elements by ICP

D892

Foaming Characteristics

D97, D5950, D6749

Pour Point

D665

Rust Prevention

D95, D1744, D6304

Water

D445

Viscosity, Kinematic

NOTE: List of tests subject to change and not all tests run on every product tested

Distribution Of Samples

Test samples are prepared and distributed for ASTM International by Clark Labs in Jefferson Hills, PA. Program registration fees include the cost of shipping the test samples to U.S. participants or, for international participants, to a third-party shipping agent located in the U.S.

IMPORTANT for International participants: You have the following options for receipt of samples:

  • Ship through a third party shipping agent - Provide ASTM International with the complete contact information of a designated Shipping Agent located in the U.S. who will be responsible for shipping samples from the U.S. to your facility. Participants are responsible for making financial and shipping arrangements directly with the shipping agent.
    • Please be advised that when samples are shipped, an e-mail is sent only to the contact of record on your ASTM PTP account. It is the customer’s responsibility to advise their designated shipper that the sample has been shipped.
    • We cannot permit shipping agents to pick up samples at our distributors’ warehouses.
  • Ship directly from the sample distributor via UPS, DHL, or FEDEX - Provide ASTM International with your shipping account number to cover shipping charges. Check that your carrier will deliver the test materials to your location. Materials classified as Hazardous may have restrictions.
    • You are responsible for additional fees charged-back to our distributor for any reason relative to your sample shipment including, but not limited to, fees for fuel surcharges, missing/invalid account numbers, dangerous goods, remote area delivery, and multiple delivery attempts.
  • Product Shipment Specs
    • Quantity: 1 Gal
    • Shipping Weight: 10lbs
    • Dimensions: 8x8x11"
    • ECCN: EAR99
    • Harm Code: 2710.11.9000
  • Generic SDS

Program Requirements

Participation is on an annual fee basis and open to all laboratories. Registration fees must be paid in advance to participate. Testing must be performed within the participant's laboratory facilities. A laboratory does not need to perform all the program tests to participate.

About Astm International Committee D02 On Petroleum Products, Liquid Fuels, And Lubricants

About ASTM International COMMITTEE D02 ON PETROLEUM PRODUCTS, LIQUID FUELS AND LUBRICANTS provides the technical direction for the program. Test information generated through the program is utilized by Committee D02 to determine if modifications to ASTM International methods or new methods are warranted and to analytically review program test results. (All data and related information generated from the program is coded to maintain lab confidentiality.)