A447/A447M-11(2021) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service
F3284-18 Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry
A899-91(2021) Standard Specification for Steel Wire, Epoxy-Coated
A1023/A1023M-21 Standard Specification for Carbon Steel Wire Ropes for General Purposes
A973/A973M-21 Standard Specification for Grade 100 Alloy Steel Chain
F3319-20 Standard Specification for Selection and Application of Field-Installed Cryogenic Pipe and Equipment Insulation Systems on Liquefied Natural Gas (LNG)-Fueled Ships
A451/A451M-20 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service
F680-20 Standard Test Methods for Nails
A1039/A1039M-20 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process
A703/A703M-20a Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A255-20a Standard Test Methods for Determining Hardenability of Steel
F844-19 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
A780/A780M-20 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A20/A20M-20 Standard Specification for General Requirements for Steel Plates for Pressure Vessels
A1094/A1094M-20 Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement
A510/A510M-20 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel
A691/A691M-19 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures
A866-18 Standard Specification for Medium Carbon Anti-Friction Bearing Steel
A913/A913M-19 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
A230/A230M-19 Standard Specification for Steel Wire, Carbon Valve Spring Quality
A1059/A1059M-18 Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
A905-19 Standard Specification for Steel Wire, Pressure Vessel Winding
A762/A762M-19 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
A987/A987M-19 Standard Practice for Measuring Shape Characteristics of Tin Mill Products
A980/A980M-19 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
A632-19 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service
A853-19 Standard Specification for Steel Wire, Carbon, for General Use
A710/A710M-19 Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates
A512-18 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing
A291/A291M-19 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
A878/A878M-19 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality
A542/A542M-19 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
A672/A672M-19 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures
A1115/A1115M-19 Standard Practice for Construction of Mechanically Stabilized Earth Walls with Inextensible Soil Reinforcement
F3459-21 Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sound Walls
A413/A413M-21 Standard Specification for Carbon Steel Chain
A391/A391M-21 Standard Specification for Grade 80 Alloy Steel Chain
F1510-21 Standard Specification for Rotary Positive Displacement Pumps, Ships Use
F1554-20 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
F606/F606M-21 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
A660/A660M-21 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service
A911/A911M-21 Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties
A821/A821M-21 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks
F1000-21 Standard Practice for Piping System Drawing Symbols
A781/A781M-21 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use
D3963/D3963M-21 Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
A487/A487M-21 Standard Specification for Steel Castings Suitable for Pressure Service
A356/A356M-21 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines
A1087/A1087M-21 Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet
A239-21 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A754/A754M-21 Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence
A1030/A1030M-21 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products
F1273-21 Standard Specification for Tank Vent Flame Arresters
A1073/A1073M-21 Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet
A1091/A1091M-21 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A266/A266M-21 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components
F1321-21 Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel
A90/A90M-21 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A428/A428M-21 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
R0033 ASME B36.10M-2004 Welded and Seamless Wrought Steel Pipe
R0036 Stainless Steel Pipe (This is not an ASTM standard; available as PDF only)
F3386/F3386M-21 Standard Specification for Detonation Flame Arresters
A985/A985M-21 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts
A957/A957M-21 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use
A872/A872M-21 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments
C1460-21 Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground
A947M-16 Standard Specification for Textured Stainless Steel Sheet [Metric]
A74-21 Standard Specification for Cast Iron Soil Pipe and Fittings
A796/A796M-21 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
A135/A135M-21 Standard Specification for Electric-Resistance-Welded Steel Pipe
A1118-21 Standard Index of Specifications for Cast Iron Soil Pipe and Fittings
A743/A743M-21 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing
A795/A795M-21 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A524/A524M-21 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A352/A352M-21 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service
A740-21 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
A523/A523M-21 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits
A1081/A1081M-21 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand
F969-11(2016) Standard Practice for Construction of Chain-Link Tennis Court Fence
F2409-10(2016) Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
A565/A565M-10(2017)e1 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service
A1106/A1106M-17 Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application
C1563-08(2021) Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
A786/A786M-15(2021) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A543/A543M-09(2021) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
A945/A945M-16(2021) Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
A967/A967M-17 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts
A895-89(2017) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip
A1031/A1031M-12(2017) Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
F2049-11(2017) Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
A679/A679M-17 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn
A817-12(2017) Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A123/A123M-17 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A832/A832M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
A737/A737M-17 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
A1017/A1017M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
A841/A841M-17 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
A644-17 Standard Terminology Relating to Iron Castings
A662/A662M-17 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A297/A297M-21a Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application
A216/A216M-21 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
F1138-21 Standard Specification for Spray Shields for Mechanical Joints
F1200-21a Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F (1 MPa and 65°C))
F880-12(2017) Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws
A618/A618M-21 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
F2281-04(2017) Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
F2833-11(2017) Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type
A192/A192M-17 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service
F2163-01(2016) Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
F2162-01(2016) Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
F2215-15 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
F1199-21 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)
F3111-16 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
A1110/A1110M-21 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements
A847/A847M-21 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
F3043-15 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength
F912-11(2017) Standard Specification for Alloy Steel Socket Set Screws
F1941/F1941M-16 Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric
A262-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
F2882/F2882M-17 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)
A505-16(2021) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A506-16(2021) Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
A507-16(2021) Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
F993-21 Standard Specification for Valve Locking Devices
A749/A749M-14(2021) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A763-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels
A805/A805M-09(2021) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A1077/A1077M-21 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings
F3151-17 Standard Specification for Driven Steel Post Drive Anchor System
F3148-17a Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions
A745/A745M-20 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings
F2045-00(2018)e1 Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic
A955/A955M-20c Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement
A690/A690M-13a(2018) Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A588/A588M-19 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
F2919/F2919M-12(2018) Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels
A560/A560M-12(2018) Standard Specification for Castings, Chromium-Nickel Alloy
A1067/A1067M-12a(2018) Standard Specification for Test Coupons for Steel Castings
A530/A530M-18 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe
A648-18 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe
A380/A380M-17 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems
F2283-12(2018) Standard Specification for Shipboard Oil Pollution Abatement System
A489-18e1 Standard Specification for Carbon Steel Eyebolts
F2094/F2094M-18a Standard Specification for Silicon Nitride Bearing Balls
F2730/F2730M-18a Standard Specification for Silicon Nitride Cylindrical Bearing Rollers
A426/A426M-18 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service
F1908-08(2018) Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
F2699-08(2018) Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
F2698-08(2018) Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities
A252/A252M-19 Standard Specification for Welded and Seamless Steel Pipe Piles
F3059-18 Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding
A434/A434M-18 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
A313/A313M-18 Standard Specification for Stainless Steel Spring Wire
A938-18 Standard Test Method for Torsion Testing of Wire
A931-18 Standard Test Method for Tension Testing of Wire Ropes and Strand
A794/A794M-18 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A636-08(2018) Standard Specification for Nickel Oxide Sinter
A389/A389M-13(2018) Standard Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service
F3042-13(2018) Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws
A915/A915M-08(2018) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades
A228/A228M-18 Standard Specification for Steel Wire, Music Spring Quality
A232/A232M-18 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire
A231/A231M-18 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire
A827/A827M-14(2018) Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications
A401/A401M-18 Standard Specification for Steel Wire, Chromium-Silicon Alloy
A589/A589M-06(2018) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe
A890/A890M-18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application
A1015-01(2018) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications
F467-13(2018) Standard Specification for Nonferrous Nuts for General Use
F468M-06(2018) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
F467M-06a(2018) Standard Specification for Nonferrous Nuts for General Use (Metric)
A689-97(2018) Standard Specification for Carbon and Alloy Steel Bars for Springs
A556/A556M-18 Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes
A125-96(2018) Standard Specification for Steel Springs, Helical, Heat-Treated
A210/A210M-19 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes
A996/A996M-16 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A970/A970M-18 Standard Specification for Headed Steel Bars for Concrete Reinforcement
A779/A779M-16 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete
A1-00(2018) Standard Specification for Carbon Steel Tee Rails
A1065/A1065M-18 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point
A829/A829M-17 Standard Specification for Alloy Structural Steel Plates
A1043/A1043M-18 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
F1755M-96(2018) Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)
F3286-17 Standard Guide for Cybersecurity and Cyberattack Mitigation
A802-19 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination
A767/A767M-19 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
F2361-18 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower
A564/A564M-19a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
A770/A770M-03(2018) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
F2039-00(2018) Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program
A586-18 Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand
A1024/A1024M-18 Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless
A1112/A1112M-18 Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes
F1207M-12(2018) Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]
F1669M-12(2018) Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]
A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
F2431-04(2018) Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
F2430-04(2018) Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
F2444-04(2018) Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
F2446-04(2018) Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange
A285/A285M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
A184/A184M-19 Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
F3329-18 Standard Specification for Carbon and Alloy Steel Metric Rivets
A943/A943M-01(2019) Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes
A49-12(2019) Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
A949/A949M-01(2019) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe
A478-97(2019) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A368-95a(2019) Standard Specification for Stainless Steel Wire Strand
A492-95(2019) Standard Specification for Stainless Steel Rope Wire
A908-03(2019) Standard Specification for Stainless Steel Needle Tubing
A814/A814M-15(2019) Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe
F1069-19 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use
F1003-19 Standard Specification for Searchlights on Motor Lifeboats
F1070-19 Standard Specification for Doors, Non-Tight, for Marine Use
A264-12(2019) Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
A263-12(2019) Standard Specification for Stainless Chromium Steel-Clad Plate
A3-01(2019) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
F1073-19 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use
F1144-19 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged
F1143-19 Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight
F2044-09(2019)e1 Standard Specification for Liquid Level Indicating Equipment, Electrical
F1197-19 Standard Specification for Sliding Watertight Door Control Systems
F1196-19 Standard Specification for Sliding Watertight Door Assemblies
A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete
F1136/F1136M-11(2019) Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
A529/A529M-19 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A641/A641M-19 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire
F2000-19 Standard Safety Performance Specification for Fences for Baseball and Softball Fields
A36/A36M-19 Standard Specification for Carbon Structural Steel
A214/A214M-19 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes
A671/A671M-20 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A536-84(2019)e1 Standard Specification for Ductile Iron Castings
A128/A128M-19 Standard Specification for Steel Castings, Austenitic Manganese
A918-06(2019) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
F1718-01(2019) Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps
F2014-00(2019) Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
F1795-00(2019) Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems
F1791-00(2019) Standard Specification for Filters Used in Air or Nitrogen Systems
F2015-00(2019) Standard Specification for Lap Joint Flange Pipe End Applications
A736/A736M-17 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel
A738/A738M-19 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
A857/A857M-19 Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A896/A896M-09(2019) Standard Practice for Conducting Case Studies on Galvanized Structures
F964-13(2019) Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
F3342-19 Standard Guide for Temporary Fence Applications for Construction Sites
F2957-13(2019)e1 Standard Specification for Ornamental Aluminum Fence Systems
F1565-00(2019) Standard Specification for Pressure-Reducing Valves for Steam Service
F1137/F1137M-19 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
F1685-00(2019) Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems
F1567-94(2019) Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers
F2154-13(2019) Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced
F2877/F2877M-13(2019) Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum
F2087-13(2019) Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick
F1134-15(2019) Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators
A307-21 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength
A572/A572M-21e1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
F1985-99(2019)e1 Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves
F3226/F3226M-19 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems
A421/A421M-21 Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete
F1370-92(2019)e1 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard
A675/A675M-14(2019) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A920/A920M-14(2019) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
A807/A807M-19 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
F707/F707M-94(2019)e1 Standard Specification for Modular Gauge Boards
A810-01(2019) Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
A640-97(2019) Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
F1940-07a(2019) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
A351/A351M-18e1 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A1032-15(2019) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe
A101-04(2019) Standard Specification for Ferrochromium
A102-04(2019) Standard Specification for Ferrovanadium
A144-04(2019) Standard Specification for Ferrotungsten
A132-04(2019) Standard Specification for Ferromolybdenum
A324-08(2019) Standard Specification for Ferrotitanium
A146-04(2019) Standard Specification for Molybdenum Oxide Products
A1088-13(2019) Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)
F1999-14(2019) Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
A265-12(2019) Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A516/A516M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A423/A423M-19 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes
A178/A178M-19 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A134/A134M-19 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)
A610-79(2019) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
A914/A914M-19 Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
A959-19 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A707/A707M-19 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service
A603-19 Standard Specification for Metallic-Coated Steel Structural Wire Rope
A700-14(2019) Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment
A979/A979M-03(2019) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
A1058-19 Standard Test Methods for Mechanical Testing of Steel Products—Metric
A106/A106M-19a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A99-03(2019) Standard Specification for Ferromanganese
A568/A568M-19a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
F1085-19 Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels
F1092-19 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems
F3353-19 Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries
A727/A727M-14(2019) Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A758/A758M-14(2019) Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness
F782-19 Standard Specification for Doors, Furniture, Marine
F1245-19 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard
F1076-19 Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube
F436/F436M-19 Standard Specification for Hardened Steel Washers Inch and Metric Dimensions
A858/A858M-19 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
F1123-87(2019) Standard Specification for Non-Metallic Expansion Joints
F1121-87(2019) Standard Specification for International Shore Connections for Marine Fire Applications
F1139-88(2019) Standard Specification for Steam Traps and Drains
A884/A884M-19e1 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A862/A862M-98(2020) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
F1142-19 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight
A917-08(2020) Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
F1172-88(2019) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type
F841-19 Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels
F1338-91(2019) Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly
F1333-91(2019) Standard Specification for Construction of Fire and Foam Station Cabinets
F1476-07(2019) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
A254/A254M-12(2019) Standard Specification for Copper-Brazed Steel Tubing
A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections
A131/A131M-19 Standard Specification for Structural Steel for Ships
F940-99(2019)e1 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding
F1155-10(2019) Standard Practice for Selection and Application of Piping System Materials
F2168-13(2019) Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring
F941-99(2019) Standard Practice for Inspection of Marine Surface Preparation and Coating Application
A363-03(2020)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
A1093/A1093M-15(2020)e1 Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials
F1005-91(2019) Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration
F1098-87(2019) Standard Specification for Envelope Dimensions for Butterfly Valves—NPS 2 to 24
F1120-87(2019) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
A541/A541M-05(2020) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
A483/A483M-10(2020) Standard Specification for Silicomanganese
A323-05(2020) Standard Specification for Ferroboron
A592/A592M-10(2020) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
A561-08(2020) Standard Practice for Macroetch Testing of Tool Steel Bars
F3019/F3019M-19 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners
A601/A601M-10(2020) Standard Specification for Electrolytic Manganese Metal
A701/A701M-10(2020) Standard Specification for Ferromanganese-Silicon
A1099/A1099M-20 Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels
A1062-10(2020) Standard Specification for Steel Castings Sampling
A1045-10(2021) Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets Used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
F906-85(2020) Standard Specification for Letters and Numerals for Ships
A597/A597M-14(2020) Standard Specification for Cast Tool Steel
A481-05(2020) Standard Specification for Chromium Metal
A892-09(2020) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
A649/A649M-10(2020) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
A495-06(2020) Standard Specification for Calcium-Silicon Alloys
A966/A966M-15(2020) Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
A1025/A1025M-10(2020) Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements
A982/A982M-10(2020) Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
E588-03(2020) Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
A1089/A1089M-14(2020) Standard Specification for Highly Loaded Anti-Friction Bearing Steel
A183-14(2020) Standard Specification for Carbon Steel Track Bolts and Nuts
A2-02(2020) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
F2191/F2191M-13(2020)e1 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn
A437/A437M-15(2021) Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service
A334/A334M-04a(2021) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A799/A799M-10(2020) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content
A1092-15(2020) Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet
A835/A835M-10(2020) Standard Specification for Sizes of Ferroalloys and Alloy Additives
F2362-03(2019) Standard Specification for Temperature Monitoring Equipment
A922-05(2020) Standard Specification for Silicon Metal
F3052-14(2020)e1 Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft
A579/A579M-20 Standard Specification for Superstrength Alloy Steel Forgings
F1130-99(2020) Standard Practice for Inspecting the Coating System of a Ship
F1323-14(2020) Standard Specification for Shipboard Incinerators
A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
A764-07(2021) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A295/A295M-14(2020) Standard Specification for High-Carbon Anti-Friction Bearing Steel
A466/A466M-07(2020) Standard Specification for Weldless Chain
A418/A418M-15(2020) Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
A470/A470M-05(2020) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
A467/A467M-20 Standard Specification for Machine and Coil Chain
A1021/A1021M-20 Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
C1461-21 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
A974-97(2021) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
A27/A27M-20 Standard Specification for Steel Castings, Carbon, for General Application
A278/A278M-01(2020) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C)
A159-83(2020) Standard Specification for Automotive Gray Iron Castings
C1440-21 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
A732/A732M-20 Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures
A995/A995M-20 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts
F2660-20 Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement
A1014/A1014M-16(2021) Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service
A143/A143M-07(2020) Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
F2548-20 Standard Specification for Expanded Metal Fence Systems for Security Purposes
A319-71(2020) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing Parts
A436-84(2020) Standard Specification for Austenitic Gray Iron Castings
A322-13(2018)e1 Standard Specification for Steel Bars, Alloy, Standard Grades
F432-19 Standard Specification for Roof and Rock Bolts and Accessories
A834-95(2020) Standard Specification for Common Requirements for Iron Castings for General Industrial Use
A822/A822M-20 Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service
A1076/A1076M-20 Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel
A1068-10(2020) Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products
A800/A800M-20 Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite
F2780-20 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers
A1074-11(2020) Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals
A1082/A1082M-16(2021) Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications
A1056-20 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
C564-20a Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C1277-20 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1540-20 Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
A1072/A1072M-11(2020) Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products
A537/A537M-20 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A148/A148M-20e1 Standard Specification for Steel Castings, High Strength, for Structural Purposes
A608/A608M-20 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures
A612/A612M-20 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
F901-20 Standard Specification for Aluminum Transmission Tower Bolts and Nuts
F1883-20 Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units
A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy
F1808-03(2019) Standard Guide for Weight Control Technical Requirements for Surface Ships
F3393-20e1 Zinc-Flake Coating Systems for Fasteners
A501/A501M-21 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A930-09(2020) Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
A111-99a(2020) Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
A925-03(2020) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
A499-15(2020) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
F1014-20 Standard Specification for Flashlights on Vessels
F837-20 Standard Specification for Stainless Steel Socket Head Cap Screws
A513/A513M-20a Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A836/A836M-14(2020) Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service
A459-08(2020) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
F900-11(2017) Standard Specification for Industrial and Commercial Steel Swing Gates
F654-07(2017) Standard Specification for Residential Chain Link Fence Gates
F2200-20 Standard Specification for Automated Vehicular Gate Construction
F3449-20 Standard Guide for Inclusion of Cyber Risks into Maritime Safety Management Systems in Accordance with IMO Resolution MSC.428(98)―Cyber Risks and Challenges
A1061/A1061M-20ae1 Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand
A304-20 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
A573/A573M-20 Standard Specification for Structural Carbon Steel Plates
F541-12(2020) Standard Specification for Alloy Steel Eyebolts
A449-14(2020) Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A31-14(2020) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
A372/A372M-20e1 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
A503/A503M-15(2020) Standard Specification for Ultrasonic Examination of Forged Crankshafts
F1794-97(2021) Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems
F1799-97(2021) Standard Guide for Shipboard Generated Waste Management Audits
F1508-96(2021) Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services
F1201-88(2021) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0 °F
F1431-92(2021) Standard Specification for Water Trap for Diesel Exhaust
F2161-21 Standard Guide for Instrument and Precision Bearing Lubricants—Part 1 Oils
F1793-97(2021) Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service
F1792-97(2021) Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service
A871/A871M-20 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A887-20 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application
A575-20 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
F2443-04(2021) Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
F2953-12(2021) Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages
A909/A909M-06(2021) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use
A290/A290M-16(2021) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
A482/A482M-11(2021) Standard Specification for Ferrochrome-Silicon
A891/A891M-16(2021) Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
A986/A986M-01(2021) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
A983/A983M-06(2021) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
A550-16(2021) Standard Specification for Ferrocolumbium (Ferroniobium)
A311/A311M-04(2020) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
A760/A760M-15(2020) Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A761/A761M-18 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A562/A562M-10(2021) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
A599/A599M-07(2017) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
A1057/A1057M-08(2019) Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A856/A856M-03(2020) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
A882/A882M-20 Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand
A1114/A1114M-20 Standard Specification for Low-Relaxation, Seven-Wire, Grade 240 [1655], Stainless Steel Strand for Prestressed Concrete
A855/A855M-03(2020) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
F2453/F2453M-14(2019) Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes
A684/A684M-17 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
A704/A704M-19e1 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A910/A910M-18 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete
F537-01(2019) Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
A229/A229M-18 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
A424/A424M-18 Standard Specification for Steel, Sheet, for Porcelain Enameling
A1113/A1113M-20e1 Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
A849-15(2021) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
A818-06(2021) Standard Specification for Coppered Carbon Steel Wire
A390-06(2021) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A460-11(2021) Standard Specification for Copper-Clad Steel Wire Strand
A1012-10(2021) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
A928/A928M-14(2021) Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal
F1386-92(2021) Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding
A803/A803M-16(2021) Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes
F2781-15(2021) Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
F2589-16(2021) Standard Specification for Ornamental Fences Employing Steel Tubular Pickets
A709/A709M-21 Standard Specification for Structural Steel for Bridges
A751-21 Standard Test Methods and Practices for Chemical Analysis of Steel Products
A972/A972M-00(2021) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles
A759-21 Standard Specification for Carbon Steel Crane Rails
F1878-21 Standard Guide for Escort Vessel Evaluation and Selection
A66-21 Standard Specification for Steel Screw Spikes
A67-00(2021) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
A744/A744M-21a Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service
A511/A511M-21a Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar
A844/A844M-21 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
A1120/A1120M-21 Standard Specification for Electric-Resistance-Welded Carbon Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes with Textured Surface
F987-04(2022) Standard Specification for Portable Intermediate Flush Deck Stanchion
F670-02(2022) Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing
A327/A327M-22 Standard Test Methods for Impact Testing of Cast Irons
A367-22 Standard Test Methods for Chill Testing of Cast Iron
F2832-11(2021) Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners
F2482/F2482M-21 Standard Specification for Load-Indicating Externally Threaded Fasteners
F2488-05(2022) Standard Terminology for Rolling Element Bearings
F2511-05(2022) Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid
F2590-06(2022) Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples
F2591-06(2022) Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
F1667/F1667M-21a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
A574-21 Standard Specification for Alloy Steel Socket-Head Cap Screws
F1097-17(2022) Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)
F1145-05(2022) Standard Specification for Turnbuckles, Swaged, Welded, Forged
A217/A217M-22 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service
A469/A469M-07(2022) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors
A485-17(2022) Standard Specification for High Hardenability Antifriction Bearing Steel
A494/A494M-22 Standard Specification for Castings, Nickel and Nickel Alloy
A534-17(2022) Standard Specification for Carburizing Steels for Anti-Friction Bearings
A711/A711M-17(2022) Standard Specification for Steel Forging Stock
A739-90a(2022) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
A756-17(2022) Standard Specification for Stainless Anti-Friction Bearing Steel
A604/A604M-07(2022) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
A646/A646M-17(2022) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
A952/A952M-02(2022) Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
A906/A906M-02(2022) Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
A837/A837M-17(2022) Standard Specification for Steel Forgings, Alloy, for Carburizing Applications
A624/A624M-22 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
A626/A626M-22 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
A209/A209M-03(2022) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes
A1053/A1053M-12(2022) Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe
A623-22 Standard Specification for Tin Mill Products, General Requirements
A623M-22 Standard Specification for Tin Mill Products, General Requirements [Metric]
A1103/A1103M-16(2022) Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications
A879/A879M-22 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A921/A921M-93(2022) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
F1757-96(2022) Standard Guide for Digital Communication Protocols for Computerized Systems
F1716-96(2022) Standard Guide for Transition and Performance of Marine Software Systems Maintenance
F2001-15(2022) Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record
F2017-15(2022) Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration
F2218-02(2022) Standard Guide for Hardware Implementation for Computerized Systems
F2192-05(2022) Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders
A116-22 Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
A121-22 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A475-22 Standard Specification for Metallic-Coated Steel Wire Strand
F1178-11(2022) Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture
F822-22 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine
F823-22 Standard Specification for Desk, Log, Marine, Steel, with Cabinet
F824-22 Standard Specification for Tables, Mess, Marine, Steel
F825-22 Standard Specification for Drawers, Furniture, Marine, Steel
F826-22 Standard Specification for Tops, Furniture, Marine, Steel
F1018-22 Standard Specification for Steel Emergency Gear Stowage Locker
A48/A48M-22 Standard Specification for Gray Iron Castings
A991/A991M-22 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products
A702-22 Standard Specification for Steel Fence Posts, Hot Wrought
A1066/A1066M-22 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)
A411-08(2022) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
A854/A854M-08(2022) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
A798/A798M-22 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A1108-17(2022) Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams
A1084-15a(2022) Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels
C1173-22 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
F547-22 Standard Terminology of Nails for Use with Wood and Wood-Base Materials
F1337-22 Standard Practice for Human Systems Integration Program Requirements for Ships and Marine Systems, Equipment, and Facilities
F765-93(2022) Standard Specification for Wildcats, Ship Anchor Chain
F992-17(2022) Standard Specification for Valve Label Plates
F885-84(2022) Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS
F3257-17(2022) Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations
F1455-92(2022) Standard Guide for Selection of Structural Details for Ship Construction
A615/A615M-22 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A1096/A1096M-22 Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
F718-22 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
F1331-22 Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces
F2876-22 Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications
A1122/A1122M-22 Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion
F2246-06(2022) Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
F2332-06(2022) Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
F2489-06(2022) Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases
F2661-07(2022) Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
A1007-22 Standard Specification for Carbon Steel Wire for Wire Rope
F1122-22 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)
A355-89(2022) Standard Specification for Steel Bars, Alloys, for Nitriding
A681-08(2022) Standard Specification for Tool Steels Alloy
A696-17(2022) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
A729/A729M-17(2022) Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
A765/A765M-07(2022) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
A1040-17(2022) Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
A1075-12(2022) Standard Specification for Flanged Steel U-Channel Posts
A595/A595M-22 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A139/A139M-22 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A1097/A1097M-22 Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger)
A820/A820M-22 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A992/A992M-22 Standard Specification for Structural Steel Shapes
A956/A956M-22 Standard Test Method for Leeb Hardness Testing of Steel Products
A204/A204M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
A514/A514M-22 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A225/A225M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
A299/A299M-17(2022) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
A302/A302M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A353/A353M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel
A515/A515M-17(2022) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A645/A645M-10(2022) Standard Specification for Pressure Vessel Plates, 5 % and 5
A693-22 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A635/A635M-22 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A694/A694M-16(2022) Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
A733-16(2022) Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A1098/A1098M-18(2022) Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)
A1100-16(2022) Standard Guide for Qualification and Control of Induction Heat Treating
A439/A439M-18(2022) Standard Specification for Austenitic Ductile Iron Castings
A476/A476M-00(2022) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls
A518/A518M-99(2022) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A602-94(2022) Standard Specification for Automotive Malleable Iron Castings
A667/A667M-87(2022) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders
A897/A897M-22 Standard Specification for Austempered Ductile Iron Castings
A338-84(2022) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)
A395/A395M-99(2022) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A842-11A(2022)e1 Standard Specification for Compacted Graphite Iron Castings
A47/A47M-99(2022)e1 Standard Specification for Ferritic Malleable Iron Castings
A220/A220M-99(2022)e1 Standard Specification for Pearlitic Malleable Iron
A377-18(2022)e1 Standard Index of Specifications for Ductile Iron Pressure Pipe
A716-18(2022) Standard Specification for Ductile Iron Culvert Pipe
A746-18(2022) Standard Specification for Ductile Iron Gravity Sewer Pipe
A748/A748M-87(2022) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use
A874/A874M-98(2022) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service
A942/A942M-95(2022) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells
F721-18(2022) Standard Specification for Gauge Piping Assemblies
F856-97(2022) Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)
F722-18(2022) Standard Specification for Welded Joints for Shipboard Piping Systems
F986-86(2022) Standard Specification for Suction Strainer Boxes
F994-86(2022) Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections
F998-12(2022) Standard Specification for Centrifugal Pump, Shipboard Use
F1006-86(2022) Standard Specification for Entrainment Separators for Use in Marine Piping Applications
F1007-18(2022) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
F1020-86(2022) Standard Specification for Line-Blind Valves for Marine Applications
F1507-99(2022) Standard Specification for Surge Suppressors for Shipboard Use
F2046-00(2022) Standard Specification for Tachometers, Various
F2070-00(2022) Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic
F2071-00(2022) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic
F681-82(2022) Standard Practice for Use of Branch Connections
F704-81(2022) Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
A522/A522M-22 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
A587-22 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry
A674-22 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe
A775/A775M-22 Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A1055/A1055M-22 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
A1078/A1078M-22 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement
A934/A934M-22 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A463/A463M-22 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A581/A581M-22a Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods
A924/A924M-22a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A582/A582M-22 Standard Specification for Free-Machining Stainless Steel Bars
A1063/A1063M-22 Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A392-11a(2022) Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A491-11(2022) Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A824-01(2022) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A944-22 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
A1105-17(2022) Standard Specification for Corrugated Steel Manhole Assemblies
A1107/A1107M-17(2022) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes
F668-17(2022) Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric
F934-96(2022) Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
F1043-18(2022) Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework
F1083-18(2022) Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1183-96(2022) Standard Specification for Aluminum Alloy Chain Link Fence Fabric
F1379-95(2022) Standard Terminology Relating to Barbed Tape
F1553-11(2022) Standard Guide for Specifying Chain Link Fence
A1111-22 Standard Specification for Cast Iron Closet Flanges for Use with Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications
A1109-22 Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
F1664-08(2022) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665-08(2022) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1910-98(2022) Standard Specification for Long Barbed Tape Obstacles
F3000/F3000M-13(2022) Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats
A951/A951M-22 Standard Specification for Steel Wire for Masonry Joint Reinforcement
A1022/A1022M-22a Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
A1044/A1044M-22a Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
A1060/A1060M-22 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
A1064/A1064M-22 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
A385/A385M-22 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
A376/A376M-22 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service
A787/A787M-22 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing
A860/A860M-22 Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings
A757/A757M-22 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service
A898/A898M-17(2022) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
F2328-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts
F2328M-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)
A659/A659M-22 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
A420/A420M-22 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A403/A403M-22b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A1123/A1123M-22 Standard Specification for Carbon Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP), Built-Up, Square, Rectangular, and Special Shape Tube
A1085/A1085M-22 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)
A553/A553M-22 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7 %, 8 %, and 9 % Nickel
F593-22 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F594-22 Standard Specification for Stainless Steel Nuts
F3131-14(2023) Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages
F3256-23 Standard Guide for Reporting and Recording of Near-Misses for Maritime Industry
F2363/F2363M-17(2023) Standard Specification for Sewage and Graywater Flow Through Treatment Systems
F2408-16(2023) Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
A706/A706M-22a Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement
F1428-23 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
F1184-23e1 Standard Specification for Industrial and Commercial Horizontal Slide Gates
A997/A997M-23 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination
A498/A498M-17(2023) Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins
A288-18(2023) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
A456/A456M-08(2023) Standard Specification for Magnetic Particle Examination of Large Crankshaft
A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A504/A504M-18(2023) Standard Specification for Wrought Carbon Steel Wheels
A531/A531M-18(2023) Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
A551/A551M-08(2023) Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
A723/A723M-18a(2023) Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
A1049/A1049M-18(2023) Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
A964/A964M-23 Standard Specification for Corrugated Steel Box Culverts
A407-23 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs
A861-04(2023) Standard Specification for High-Silicon Iron Pipe and Fittings
A638/A638M-23 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
A705/A705M-23 Standard Specification for Age-Hardening Stainless Steel Forgings
A181/A181M-23 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping
A234/A234M-23a Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A668/A668M-23 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A1119/A1119M-23a Standard Specification for Welded Partially Corrugated Stainless Steel Tube for Potable Water and General Service
F3649/F3649M-23 Standard Guide for Continuity of Maritime Operations During the Onset of a Pandemic
A153/A153M-23 Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A960/A960M-23 Standard Specification for Common Requirements for Wrought Steel Piping Fittings
A961/A961M-23 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications
A988/A988M-23 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
F1166-23 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities
F2935-23 Standard Specification for Chocks, Panama, Mooring Cast Steel
F2936-23 Standard Specification for Chocks, Ship Mooring, Cast Steel
A580/A580M-23 Standard Specification for Stainless Steel Wire
F682-82a(2023) Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings
F956-91(2023) Standard Specification for Bell, Cast, Sound Signalling
F957-91(2023) Standard Specification for Gong, Sound Signaling
F1030-86(2023) Standard Practice for Selection of Valve Operators
F1099M-18(2023) Standard Specification for Rat Guards, Ship’s (Metric)
F1173-01(2023) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications
F1347-23 Standard Specification for Manually Operated Fueling Hose Reels
F1546-23 Standard Specification for Fire Hose Nozzles
A653/A653M-23 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A923-23 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels
F1298-90(2023) Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications
F1311-90(2023) Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges
F1312-19(2023) Standard Specification for Brick, Insulating, High Temperature, Fire Clay
F1330-91(2023) Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe
F1348/F1348M-91(2023) Standard Specification for Pneumatic Rotary Descaling Machines
F1511-18(2023) Standard Specification for Mechanical Seals for Shipboard Pump Applications
F1182-07(2023) Standard Specification for Anodes, Sacrificial Zinc Alloy
F1270-97(2023) Standard Practice for Preparing and Locating Emergency Muster Lists
F1271-90(2023) Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications
F1297-90(2023) Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment
F1548-01(2023) Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications
F1994-99(2023) Standard Test Method for Shipboard Fixed Foam Firefighting Systems
F2798-09(2023) Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications
F3285-18(2023) Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service
F2934-12(2023) Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications
A1011/A1011M-23 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A606/A606M-23 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
F3648-23 Standard Guide for Maintenance of Marine Sanitation Devices (MSDs) and the Effects of Cleaning Agents on MSD Operations
A769/A769M-17(2023) Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
A479/A479M-23a Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A194/A194M-23 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A213/A213M-23 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A989/A989M-23 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
A962/A962M-23a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range
F567-23 Standard Practice for Installation of Chain-Link Fence
A203/A203M-23 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel
F835-23 Standard Specification for Alloy Steel Socket Button, Low and Flat Countersunk Head Cap Screws
F879-23 Standard Specification for Stainless Steel Socket Button, Low and Flat Countersunk Head Cap Screws
F468-23 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use
A29/A29M-23 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought
F783-88(2023) Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung
F985-18(2023) Standard Specification for Pilot Platform
F1019M-00(2023) Standard Specification for Steel Deck Gear Stowage Box (Metric)
F1068-90(2023) Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use
F1071-94(2023) Standard Specification for Expanded-Metal Bulkhead Panels
F1072-94(2023) Standard Specification for Expanded-Metal Doors
F1074-87(2023) Standard Specification for Cleats, Welded Horn Type
F1106-87(2023) Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)
F1244-08(2023) Standard Specification for Berths, Marine
F1385-07(2023) Standard Practice for Platforms in Cargo Tanks
F3040/F3040M-13(2023) Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads
F821/F821M-23 Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine
F1309-23 Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations
A1003/A1003M-23 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A747/A747M-23 Standard Specification for Steel Castings, Stainless, Precipitation Hardening
A788/A788M-23 Standard Specification for Steel Forgings, General Requirements
F788/F788M-20e1 Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series
F812/F812M-12(2022)e1 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series
A877/A877M-17(2023) Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality
A1000/A1000M-17(2023) Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality
A1033-18(2023) Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations
F1267-18(2023) Standard Specification for Metal, Expanded, Steel
A1124/A1124M-23 Standard Specification for Textured Epoxy-Coated Steel Reinforcing Bars
A555/A555M-23 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
F552-14(2023) Standard Terminology Relating to Chain Link Fencing
F626-14(2023) Standard Specification for Fence Fittings
F1345-10a(2023) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1911-05(2023) Standard Practice for Installation of Barbed Tape
A473-23a Standard Specification for Stainless Steel Forgings
F1387-23 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings
A994-23a Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys
A999/A999M-23 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe
E527-23 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)
A1047/A1047M-05(2023) Standard Test Method for Pneumatic Leak Testing of Tubing
A881/A881M-23 Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete
A387/A387M-17a(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
A981/A981M-23 Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Seven-Wire Steel Strand, Grade 270 [1860], Used in Prestressed Ground Anchors
A1095-15(2023) Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings
A975-23 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
A809-23 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A1046/A1046M-23 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
F2611-23 Standard Guide for Design and Construction of Chain Link Security Fencing
F2814-23 Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes
A519/A519M-23 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing
A865/A865M-23 Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
F2016-23 Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings
A792/A792M-23 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A875/A875M-23 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A314-23 Standard Specification for Stainless Steel Billets and Bars for Forging
A576-23 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
A609/A609M-12(2023) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof
A663/A663M-23 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
A823-99(2023) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings
A990/A990M-23 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service
A126-04(2023) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A197/A197M-00(2023)e1 Standard Specification for Cupola Malleable Iron
A336/A336M-23 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
A532/A532M-10(2023) Standard Specification for Abrasion-Resistant Cast Irons
A571/A571M-01(2023)e1 Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service
A240/A240M-23a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A480/A480M-23b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A474-03(2023) Standard Specification for Aluminum-Coated Steel Wire Strand
A493-23 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging
A741-23 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
A400-23 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
A965/A965M-23 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
F959/F959M-17a(2023) Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series
F2329/F2329M-15(2023) Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
F2437/F2437M-17(2023) Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
F2282-23 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
F3125/F3125M-23 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength
A381/A381M-23 Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems
A450/A450M-23 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes
A472/A472M-23 Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
A414/A414M-23 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
A388/A388M-23 Standard Practice for Ultrasonic Examination of Steel Forgings
A1035/A1035M-23a Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement
A1083/A1083M-23 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
A435/A435M-17(2023) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A455/A455M-12a(2023) Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
A859/A859M-23 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
A1016/A1016M-23 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A500/A500M-23 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A275/A275M-23 Standard Practice for Magnetic Particle Examination of Steel Forgings
A517/A517M-17(2023) Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A577/A577M-17(2023) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates
A578/A578M-17(2023) Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
F1789-23 Standard Terminology for F16 Mechanical Fasteners
A1117-23 Standard Practice for Application of Thermal Spray Aluminum (TSA) Coating to Carbon Steel Pipe
A902-23a Standard Terminology Relating to Metallic Coated Steel Products
F3394/F3394M-23 Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions
A508/A508M-23a Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
A724/A724M-09(2023) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
A1018/A1018M-23a Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
F683-23a Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery
A888-23 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
F3312/F3312M-23 Standard Practice for Liquefied Natural Gas (LNG) Bunkering Hose Transfer Assembly
A1069/A1069M-23 Standard Specification for Stainless Steel Laser and Laser Hybrid Welded Bars, Plates, Sharp-Cornered Profile (SCP), and Built-up Shapes
A1127/A1127M-23 Standard Specification for Stainless Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP) or Built-Up Rounded Corner Square, Rectangular, and Special Shape Structural Tube
A742/A742M-23a Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
F1075-97(2023) Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained
F1198-92(2023) Standard Guide for Shipboard Fire Detection Systems
F1835-97(2023) Standard Guide for Cable Splicing Installations
F1836M-15(2023) Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)
F1837M-97(2023) Standard Specification for Heat-Shrink Cable Entry Seals (Metric)
A1008/A1008M-23e1 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable
A563/A563M-23 Standard Specification for Carbon and Alloy Steel Nuts (Inch and Metric)
A394-08(2024) Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
A484/A484M-24 Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings
F1322-15(2024) Standard Guide for Selection of Shipboard Incinerators
F708-24 Standard Practice for Design and Installation of Rigid Pipe Hangers
A1034/A1034M-24 Standard Specification for Mechanical Splices for Steel Reinforcing Bars
F1470-24 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
F3204-16(2024) Standard Guide for Design and Construction of Welded Wire Fence Systems for Security Purposes
A276/A276M-24a Standard Specification for Stainless Steel Bars and Shapes
A100-07(2024) Standard Specification for Ferrosilicon
A903/A903M-99(2024) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection
A625/A625M-13(2024) Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
A630-16a(2024) Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
A650/A650M-18(2024) Standard Specification for Tin Mill Products, Black Plate, Double Reduced
A657/A657M-18(2024) Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
A1080/A1080M-24 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings
A471/A471M-19(2024) Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
A958/A958M-24 Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades
A1010/A1010M-24 Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip
A270/A270M-24 Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
A686-92(2024) Standard Specification for Tool Steel, Carbon
A1090/A1090M-19(2024) Standard Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures
A179/A179M-24 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
A269/A269M-24 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A108-24 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A283/A283M-24 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A312/A312M-24 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A350/A350M-24 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
A268/A268M-24 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service
A369/A369M-24 Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
A600-92a(2024) Standard Specification for Tool Steel High Speed
A533/A533M-24 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
A713-24 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components
A950/A950M-24 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
A53/A53M-24 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A182/A182M-24 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
F1575/F1575M-24 Standard Test Method for Determining Bending Yield Moment of Nails, Spikes, and Dowel-type Threaded Fasteners
A109/A109M-24 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A774/A774M-24 Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
A789/A789M-24 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
A416/A416M-24 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete
A886/A886M-24 Standard Specification for Low-Relaxation, Indented, Seven-Wire Steel Strand for Prestressed Concrete
A242/A242M-24 Standard Specification for High-Strength Low-Alloy Structural Steel
A328/A328M-24 Standard Specification for Steel Sheet Piling
A815/A815M-24 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A830/A830M-24 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
A656/A656M-24 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A941-24 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
A790/A790M-24 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
A502-24 Standard Specification for Rivets, Steel, Structural
A453/A453M-17(2024) Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels
A6/A6M-24 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A370-24 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A384/A384M-24 Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
A633/A633M-24 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A755/A755M-18(2024) Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A998/A998M-18(2024) Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications
A358/A358M-24 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
A249/A249M-24 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A409/A409M-24 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
A666/A666M-24 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A333/A333M-24 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
A688/A688M-24 Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
A778/A778M-24 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A335/A335M-24 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
A813/A813M-24 Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
F3558-24 Standard Guide for Chain-Link Pickleball Court Fences
A929/A929M-24 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A193/A193M-24 Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A247-24 Standard Test Method for Visual Evaluation of Graphite in Iron Castings
A320/A320M-24 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A540/A540M-24 Standard Specification for Alloy-Steel Bolting for Special Applications
A227/A227M-24 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs
A488/A488M-24 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel
A105/A105M-24 Standard Specification for Carbon Steel Forgings for Piping Applications