D1693-21 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)

D1622-20 Standard Test Method for Apparent Density of Rigid Cellular Plastics

D2126-20 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

D1056-20 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

D1044-19 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser

D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

D957-21 Standard Practice for Determining Surface Temperature of Molds for Plastics

D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

D1755-21 Standard Specification for Poly(Vinyl Chloride) Resins

D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

D1763-00(2021) Standard Specification for Epoxy Resins

D1499-13(2021) Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

D2176-16(2021) Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester

D2116-16(2021) Standard Specification for FEP Resin Molding and Extrusion Materials

D3013-13(2021) Standard Specification for Epoxy Molding Compounds

D696-16 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

D1004-21 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

D1786-21 Standard Specification for Toluene Diisocyanate

D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

D618-21 Standard Practice for Conditioning Plastics for Testing

D1248-16 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

D2990-17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

D732-17 Standard Test Method for Shear Strength of Plastics by Punch Tool

D1998-21 Standard Specification for Polyethylene Upright Storage Tanks

D1636-21 Standard Specification for Allyl Molding Compounds

D1896/D1896M-10(2017) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

D3123-09(2017) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

D787-18 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

D1601-18 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

D3045-18 Standard Practice for Heat Aging of Plastics Without Load

D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins

D3016-97(2018) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics

D2222-19 Standard Test Method for Methanol Extract of Vinyl Chloride Resins

D1938-19 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

D2842-19 Standard Test Method for Water Absorption of Rigid Cellular Plastics

D3012-19 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions

D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

D494-11(2019) Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

D1895-17 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

D2287-19 Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

D882-18 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D792-20 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique

D1603-20 Standard Test Method for Carbon Black Content in Olefin Plastics

D1204-14(2020) Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D2732-14(2020) Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

D1710-15(2021) Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

D1712-09(2020) Standard Practice for Resistance of Plastics to Sulfide Staining

D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

D746-20 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

D704-99(2020) Standard Specification for Melamine-Formaldehyde Molding Compounds

D705-99(2020) Standard Specification for Urea-Formaldehyde Molding Compounds

D2538-18 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

D1435-20 Standard Practice for Outdoor Weathering of Plastics

D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

D1822-21 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics

D543-21 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

D1201-13(2022)e1 Standard Specification for Thermosetting Polyester Molding Compounds

D2673-14(2022) Standard Specification for Oriented Polypropylene Film

D1430-22 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

D731-22 Standard Test Method for Molding Index of Thermosetting Molding Powder

D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials

D2857-22 Standard Practice for Dilute Solution Viscosity of Polymers

D1042-22 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

D1667-22 Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)

D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

D638-22 Standard Test Method for Tensile Properties of Plastics

D1709-22 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

D2115-22 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

D542-22 Standard Test Method for Index of Refraction of Transparent Organic Plastics

D1239-22a Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals

D1562-22 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)

D1593-22 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

D2238-22 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm⁻¹

D570-22 Standard Test Method for Water Absorption of Plastics

C1147-14(2022) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

D2291/D2291M-22 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites

D2578-23 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

D707-15(2023) Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)

D2839-16(2023) Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

D256-23e1 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

D785-23 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

D1922-23 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

D1621-16(2023) Standard Test Method for Compressive Properties of Rigid Cellular Plastics

D1623-17(2023) Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics

D1746-23 Standard Test Method for Transparency of Plastic Sheeting

D2343-17(2023) Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

D695-23 Standard Test Method for Compressive Properties of Rigid Plastics

D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

D2863-23 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

D2565-23 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

D1243-22e1 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

D2561-17(2023) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

D2659-16(2023) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles

D2734-23 Standard Test Methods for Void Content of Reinforced Plastics

D1203-23 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods

D1238-23a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

D2103-23a Standard Specification for Polyethylene Film

D1043-16(2024) Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

D2647-18(2024) Standard Specification for Crosslinkable Ethylene Plastics

D2765-16(2024) Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

D883-24 Standard Terminology Relating to Plastics

D1823-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

D1824-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates