Standard Historical Last Updated: Jun 11, 2019 Track Document
ASTM G71-81(2014)

Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes G0071-81R14 ASTM|G0071-81R14|en-US Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes Standard new BOS Vol. 03.02 Committee G01
$ 83.00 In stock

Significance and Use

3.1 Use of this guide is intended to provide information on the galvanic corrosion of metals in electrical contact in an electrolyte that does not have a flow velocity sufficient to cause erosion-corrosion or cavitation.

3.2 This standard is presented as a guide for conducting galvanic corrosion tests in liquid electrolyte solutions, both in the laboratory and in service environments. Adherence to this guide will aid in avoiding some of the inherent difficulties in such testing.

Scope

1.1 This guide covers conducting and evaluating galvanic corrosion tests to characterize the behavior of two dissimilar metals in electrical contact in an electrolyte under low-flow conditions. It can be adapted to wrought or cast metals and alloys.

1.2 This guide covers the selection of materials, specimen preparation, test environment, method of exposure, and method for evaluating the results to characterize the behavior of galvanic couples in an electrolyte.

Note 1Additional information on galvanic corrosion testing and examples of the conduct and evaluation of galvanic corrosion tests in electrolytes are given in Refs (1)2 through (2).

1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 03.02
Developed by Subcommittee: G01.11
Pages: 5
DOI: 10.1520/G0071-81R14
ICS Code: 77.060