Standard Historical Last Updated: Jun 21, 2021 Track Document
ASTM E105-16

# Standard Practice for Probability Sampling of Materials

Standard Practice for Probability Sampling of Materials E0105-16 ASTM|E0105-16|en-US Standard Practice for Probability Sampling of Materials Standard new BOS Vol. 14.01 Committee E11
\$ 66.00 In stock

Significance and Use

4.1 The purpose of the sample may be to estimate properties of a larger population, such as a lot, pile or shipment, the percentage of some constituent, the fraction of the items that fail to meet (or meet) a specified requirement, the average characteristic or quality of an item, the total weight of the shipment, or the probable maximum or minimum content of, say, some chemical.

4.2 The purpose may be the rational disposition of a lot or shipment without the intermediate step of the formation of an estimate.

4.3 The purpose may be to provide aid toward rational action concerning the production process that generated the lot, pile or shipment.

4.4 Whatever the purpose of the sample, adhering to the principles of probability sampling will allow the uncertainties, such as bias and variance of estimates or the risks of the rational disposition or action, to be calculated objectively and validly from the theory of combinatorial probabilities. This assumes, of course, that the sampling operations themselves were carried out properly, as well. For example, that any random numbers required were generated properly, the units to be sampled from were correctly identified, located, and drawn, and the measurements were made with measurement error at a level not exceeding the required purposes.

4.5 Determination of bias and variance and of risks can be calculated when the selection was only partially determined by random numbers and a frame, but they then require suppositions and assumptions which may be more or less mistaken or require additional data which may introduce experimental error.

Abstract

This practice is primarily a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material. The purpose of the sample may be to estimate properties of a larger population, such as a lot, pile or shipment, the percentage of some constituent, the fraction of the items that fail to meet (or meet) a specified requirement, the average characteristic or quality of an item, the total weight of the shipment, or the probable maximum or minimum content of some chemical. A probability sampling plan will possess an objective procedure for the selection of the sample with the use of random numbers and a definite formula for the estimate and standard error of any estimate.

This practice also covers the minimum standards for a probability sampling plan, selection of sample, sampling of bulk materials, selection of sample, and planning for sampling.

Scope

1.1 This practice is primarily a statement of principles for the guidance of ASTM technical committees and others in the preparation of a sampling plan for a specific material.

Price:
###### Reprints and Permissions
Reprints and copyright permissions can be requested through the