Standard Historical Last Updated: Oct 29, 2013 Track Document
ASTM D1636-99(2012)

Standard Specification for Allyl Molding Compounds

Standard Specification for Allyl Molding Compounds D1636-99R12 ASTM|D1636-99R12|en-US Standard Specification for Allyl Molding Compounds Standard new BOS Vol. 08.01 Committee D20
$ 73.00 In stock

Abstract

This specification provides for the identification of three types of allyl molding compounds, based on the general type of filler employed in their manufacture: Type I - High-strength materials, glass-fiber reinforced; Type II - General-purpose mineral filled; and Type III - General-purpose synthetic fiber filler. Types I and II may be subdivided into four classes according to resin composition and use as follows: Class A - Diallyl ortho-phthalate resin, nonflame-retardant; Class B - Diallyl ortho-phthalate resin, flame-retardant; Class C - Diallyl meta-phthalate resin nonflame-retardant; and Class D - Diallyl meta-phthalate resin, flame-retardant. Materials shall be compression molded, conditioned, and tested; and the individual grades shall conform to specified values of impact resistance, flexural strength, permittivity and dissipation factor, insulation resistance, flame resistance, and oxygen index.

Scope

1.1 This specification covers compression molding, thermosetting, allyl compounds as further defined in Section 3.

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

Note 1The properties included in this specification are those required to identify the molding compounds covered. There may be other requirements necessary to identify particular characteristics. These will be added to the specification as their inclusion becomes generally desirable and the necessary test data and methods become available.
Note 2There is no similar or equivalent ISO standard.
Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 08.01
Developed by Subcommittee: D20.16
Pages: 3
DOI: 10.1520/D1636-99R12
ICS Code: 83.140.99