Standard Historical Last Updated: Jan 13, 2017 Track Document
ASTM A372/A372M-15

Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels A0372_A0372M-15 ASTM|A0372_A0372M-15|en-US Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels Standard new BOS Vol. 01.05 Committee A01
$ 83.00 In stock

Abstract

This specification deals with carbon and alloy steel forgings (including gas bottles) for use in thin-walled pressure vessels. Covered here are the following grades of steel forgings: Grade A; Grade B; Grade C; Grade D; Grade E, Classes 55, 65, and 70; Grade F, Classes 55, 65, and 70; Grade G, Classes 55, 65, and 70; Grade H, Classes 55, 65, and 70; Grade J, Classes 55, 65, and 70; Grade K; Grade L; Grade J, Class 110; and Grade M, Classes 85 and 100. Materials shall be manufactured by melting procedures, and optionally heat treated by normalization, normalization and tempering, or liquid-quenching and tempering. Heat and product analyses shall be performed wherein steel specimens shall conform to required chemical compositions of carbon, manganese, phosphorus, sulfur, silicon, nickel, chromium, molybdenum, and vanadium. Steel materials shall also undergo bending, flattening and hardness tests and shall conform to required values of tensile strength, yield strength, elongation, and hardness. Forgings shall be subjected to magnetic particle examination as well.

Scope

1.1 This specification2 covers relatively thin-walled forgings (including gas bottles) for pressure vessel use. Three types of carbon steel and six types of alloy steel are included. Provision is made for integrally forging the ends of vessel bodies made from seamless pipe or tubing.

Note 1: When working to the chemical and tensile requirements of this specification, the influence of wall thickness and cooling rate will necessarily eliminate certain forging sizes in each class.

Note 2: Designations have been changed as follows:

Current

Formerly

Grade A

Type I

Grade B

Type II

Grade C

Type III

Grade D

Type IV

Grade E Class 55

Type V Grade 1 Class 55

Grade E Class 65

Type V Grade 1 Class 65

Grade E Class 70

Type V Grade 1 Class 70

Grade F Class 55

Type V Grade 2 Class 55

Grade F Class 65

Type V Grade 2 Class 65

Grade F Class 70

Type V Grade 2 Class 70

Grade G Class 55

Type V Grade 3 Class 55

Grade G Class 65

Type V Grade 3 Class 65

Grade G Class 70

Type V Grade 3 Class 70

Grade H Class 55

Type V Grade 4 Class 55

Grade H Class 65

Type V Grade 4 Class 65

Grade H Class 70

Type V Grade 4 Class 70

Grade J Class 55

Type V Grade 5 Class 55

Grade J Class 65

Type V Grade 5 Class 65

Grade J Class 70

Type V Grade 5 Class 70

Grade K

Type VI

Grade L

Type VII

Grade J Class 110

Type VIII

Grade M Class 85

Type IX Class A

Grade M Class 100

Type IX Class B

1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.

1.3 Unless the order specifies the applicable “M” specification designation (SI units), the material shall be furnished to inch-pound units.

Price:
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Book of Standards Volume: 01.05
Developed by Subcommittee: A01.06
Pages: 5
DOI: 10.1520/A0372_A0372M-15
ICS Code: 77.140.85