| ||Format||Pages||Price|| |
|9||$54.00||  ADD TO CART|
|Hardcopy (shipping and handling)||9||$54.00||  ADD TO CART|
|Standard + Redline PDF Bundle||18||$64.00||  ADD TO CART|
1.1 This standard is a compilation of definitions of terms as they are used in standards under the jurisdiction of Committee C09.
1.2 Other terminology under the jurisdiction of Committee C09 is included in two specialized standards. Terms relating to constituents of concrete aggregates are defined in Descriptive Nomenclature . Terms relating to constituents of aggregates for radiation-shielding concrete are defined in Descriptive Nomenclature .
1.3 Related terminology for hydraulic cement is included in Terminology . In the event of conflict between definitions in Terminology and definitions in Terminology , definitions in Terminology shall govern for Committee C09 standards.
1.4 When a term is used in an ASTM standard for which Committee C09 is responsible, it is included herein only if used in more than one Committee C09 standard.
Note 1: The subcommittee responsible for this standard will review definitions on a five-year basis to determine if the definition is still appropriate as stated. Revisions will be made when determined necessary. The year shown in parentheses at the end of a definition indicates the year the definition or revision to the definition was approved. A letter R and a year indicate when the definition was reviewed. No date indicates the term has not yet been reviewed.
1.5 This terminology includes notes and discussions to definitions that provide supplementary or explanatory information. These notes and discussions shall not be considered as requirements of this standard nor as parts of the definitions.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
C33/C33M Specification for Concrete Aggregates
C94/C94M Specification for Ready-Mixed Concrete
C143/C143M Test Method for Slump of Hydraulic-Cement Concrete
C219 Terminology Relating to Hydraulic and Other Inorganic Cements
C294 Descriptive Nomenclature for Constituents of Concrete Aggregates
C403/C403M Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C494/C494M Specification for Chemical Admixtures for Concrete
C511 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C638 Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C670 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C939/C939M Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C1074 Practice for Estimating Concrete Strength by the Maturity Method
C1077 Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
C1240 Specification for Silica Fume Used in Cementitious Mixtures
C1437 Test Method for Flow of Hydraulic Cement Mortar
C1610/C1610M Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C1611/C1611M Test Method for Slump Flow of Self-Consolidating Concrete
E135 Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ICS Number Code 91.100.30 (Concrete and concrete products)
UNSPSC Code 30111800(Aggregates); 30111500(Concrete and mortars)
|Link to Active (This link will always route to the current Active version of the standard.)|
ASTM C125-21a, Standard Terminology Relating to Concrete and Concrete Aggregates, ASTM International, West Conshohocken, PA, 2021, www.astm.orgBack to Top