ASTM B783-10

    Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts

      Format Pages Price  
    PDF 39 $80.40   ADD TO CART

    1. Scope

    1.1 This specification covers a variety of ferrous PM structural materials and includes a classification system or material designation code. The classification system used in this specification includes chemical composition, minimum tensile; 0.2 % offset yield strength for as-sintered materials and minimum ultimate tensile strength for heat-treated materials (sinter hardened or quenched and tempered). It also contains minimum density and maximum coercive field strength requirements for iron-phosphorus materials.

    1.2 Material classification is governed by the designation code which is explained in Appendix X1. The data provided display typical mechanical properties achieved under commercial manufacturing procedures. Physical and mechanical property performance characteristics can change as a result of subsequent processing steps beyond the steps designated in this standard.

    1.3 With the exception of density values for which the g/cm3 unit is the industry standard, property values stated in inch-pound units are the standard. Values in SI units result from conversion in accordance with . They may be approximate and are only for information.

    2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

    ASTM Standards

    A839 Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications

    B243 Terminology of Powder Metallurgy

    B528 Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

    B962 Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes Principle

    B963 Test Methods for Oil Content, Oil-Impregnation Efficiency, and Interconnected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes Principle

    E8 Test Methods for Tension Testing of Metallic Materials

    E29 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

    E1019 Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

    MPIF Standard

    MPIF Standard 35 Materials Standards for PM Structural Parts

    ICS Code

    ICS Number Code 77.160 (Powder metallurgy)

    UNSPSC Code

    UNSPSC Code 23271805(Iron powder)

    Referencing This Standard
    Link Here
    Link to Active (This link will always route to the current Active version of the standard.)

    DOI: 10.1520/B0783-10

    Citation Format

    ASTM B783-10, Standard Specification for Materials for Ferrous Powder Metallurgy (P/M) Structural Parts, ASTM International, West Conshohocken, PA, 2010,

    Back to Top