Active Standard ASTM F1061 | Developed by Subcommittee: F27.10
Book of Standards Volume: 15.07
Historical (view previous versions of standard)
This specification covers requirements for devices used to determine the release moments of ski equipment in retail sales and rental facilities; it is applicable to the manufacture, repair, and calibration of such devices. Classification: Type I-a device capable of indicating both positive and negative release moments (Mz); Type IA-a device type I with specified limits of linear displacement or angular deflection; Type IB-a type I device limited in use to a specified binding or group of bindings; Type II-a device capable of indicating both positive and negative release moments (My); Type IIA-a type II device with specified limits of linear displacement or angular deflection; Type IIB-a type II device limited in use to a specified binding or group of bindings; and Type III-a device other than type I or type II with specified capability. The test device shall be of a design such that when tested will meet the requirements prescribed. If the device is designed to indicate force, and a distance measurement is required to calculate the moment, the magnitude of the smallest increment of the distance measurement shall not be greater than 5 % of the shortest measurement anticipated.
This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.
1.3 This specification is to be used with Test Method F1062.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
E456 Terminology Relating to Quality and Statistics
F504 Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
F939 Practice for Selection of Release Torque Values for Alpine Ski Bindings
F1062 Test Method for Verification of Ski Binding Test Devices
F1063 Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
F1064 Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
ISO Standard8061 Method for the Selection of Release Torque Values Available from American National Standards Institute, 11 W. 42nd St., 13th Floor, New York, NY 10036.
ICS Number Code 97.220.20 (Winter sports equipment)
UNSPSC Code 49151502(Skis)