Standards

ASTM E867 - 06(2012)


ASTM E867 - 06(2012) Standard Terminology Relating to Vehicle-Pavement Systems


Active Standard ASTM E867 Developed by Subcommittee: E17.14 |Book of Standards Volume: 04.03

more info 11 pages $ 47.00
more info 11 pages $ 47.00

Historical (view previous versions of standard) ASTM License Agreement Shipping & Handling

More E17.14 Standards Related Products
Copyright/Permissions Standard References

ASTM E867

1. Scope

1.1 This terminology covers definitions for approved standards under the jurisdiction of ASTM Committee E17 on Vehicle-Pavement Systems. Definitions of terms specific to an individual standard are listed in the appendix. For additional information, see Terminology D8, Terminology F538, Special Report 113Special Report 113,Standard Nomenclature and Definitions for Pavement Components and Deficiencies3, and SAE J 2047, or contact ISO, PIARC, or CEN.

1.2 Other publications may reference this terminology for terms used therein.

1.3 The standard containing the term and the responsible subcommittee of Committee E17 is listed at the end of each definition. Revision of the listed standard by that subcommittee will include review of the definition and approved changes or additions will be incorporated herein.

1.4 The terms in this terminology standard are listed in categories of the five groups of Committee E17. These are definitions that are in multiple standards in various subcommittees in Groups II to V. The structure of E17 is as follows: Group II on Skid Resistance, E17.21, E17.22, E17.23, E17.24, Group III Roughness E17.31,E17.32, Group IV Pavement Management E17.41, and Group V Intelligent Transportation Systems E17.51, E17.52, E17.54.

1.5 This terminology lists the definition as presented in the approved standards. Variation of any term is also listed and referenced to the defined term (for example the term hydroplaning, viscous is also listed and referenced to the defined viscous hydroplaning).

1.6 The term and its elements should appear in the following order; term; abbreviation; symbol; dimensions of quantities, measurement units; part of a speech; delimiting phrase; statement of meaning, including specifications limits where applicable; cross references to synonyms or related terms; attribution.


2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.

ASTM Standards

D8 Terminology Relating to Materials for Roads and Pavements

E274 Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E556 Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

E950 Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

E965 Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

E1166 Guide for Network Level Pavement Management

E1170 Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E1215 Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

E1274 Test Method for Measuring Pavement Roughness Using a Profilograph

E1318 Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods

E1337 Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

E1448 Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

E1489 Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

E1656 Guide for Classification of Automated Pavement Condition Survey Equipment

E1703/E1703M Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

E1778 Terminology Relating to Pavement Distress

E1845 Practice for Calculating Pavement Macrotexture Mean Profile Depth

E1859 Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

E1889 Guide for Pavement Management Implementation

E1926 Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

E1927 Guide for Conducting Subjective Pavement Ride Quality Ratings

F538 Terminology Relating to the Characteristics and Performance of Tires

Transportation Research Board Standard

SpecialReport113, Standard Nomenclature and Definitions for Pavement Components and Deficiencies Available from Transportation Research Board, 500 Fifth Street, NW, Washington, DC, 20001.

SAE Standard

SAEJ2047 Tire Performance Terminology Available from Society for Automotive Engineers, 400 Commonwealth Drive, Warrendale, PA 15096-0001.

NIST Handbook

NationalInstituteofS (NIST) Handbook 44 Available from National Institute of Standards and Technology, 100 Bureau Drive, Stop 3460, Gaithersburg, MD 20899-3460.



Keywords

definitions; intelligent transportation system; pavement management; roughness and profiling; skid resistance; terminology; vehicle-pavement systems;



ICS Code

ICS Number Code 01.040.93 (Civil engineering (Vocabularies)); 93.080.20 (Road construction materials)



DOI: 10.1520/E0867-06R12

ASTM International is a member of CrossRef.


Citing ASTM Standards

[Back to Top]

Standards Tracker

Standards Subscriptions


Related Standards:
E1777
E1448/E1448M
E1927
E1960
E1859/E1859M
See All