Active Standard ASTM E1669 | Developed by Subcommittee: E06.25
Book of Standards Volume: 04.11
Historical (view previous versions of standard)
Significance and Use
Each Facility Rating Scale (see Figs. 1-6) in this classification provides a means to estimate the level of serviceability of a building or facility for one topic of serviceability and to compare that level against the level of any other building or facility.
This classification can be used for comparing how well different buildings or facilities meet a particular requirement for serviceability. It is applicable despite differences such as location, structure, mechanical systems, age, and building shape.
This classification can be used to estimate the amount of variance of serviceability from target or from requirement, for a single office facility, or within a group of office facilities.
This classification can be used to estimate the following:
Serviceability of an existing facility for uses other than its present use.
Serviceability (potential) of a facility that has been planned but not yet built.
Serviceability (potential) of a facility for which remodeling has been planned.
Use of this classification does not result in building evaluation or diagnosis. Building evaluation or diagnosis generally requires a special expertise in building engineering or technology and the use of instruments, tools, or measurements.
This classification applies only to facilities that are building constructions, or parts thereof. (While this classification may be useful in rating the serviceability of facilities that are not building constructions, such facilities are outside the scope of this classification.)
This classification is not intended for, and is not suitable for, use for regulatory purposes, nor for fire hazard assessment nor for fire risk assessment.
1.1 This classification contains pairs of scales for classifying an aspect of the serviceability of an office facility, that is, the capability of an office facility to meet certain possible requirements for locating the building and finding the way inside the building.
1.2 Within that aspect of serviceability, each pair of scales, shown in Figs. 1-6, are for classifying one topic of serviceability. Each paragraph in an Occupant Requirement Scale (see Figs. 1-6) summarizes one level of serviceability on that topic, which occupants might require. The matching entry in the Facility Rating Scale (see Figs. 1-6) is a translation of the requirement into a description of certain features of a facility which, taken in combination, indicate that the facility is likely to meet that level of required serviceability.
1.3 The entries in the Facility Rating Scale (see Figs. 1-6) are indicative and not comprehensive. They are for quick scanning to estimate approximately, quickly, and economically, how well an office facility is likely to meet the needs of one or another type of occupant group over time. The entries are not for measuring, knowing, or evaluating how an office facility is performing.
1.4 This classification can be used to estimate the level of serviceability of an existing facility. It can also be used to estimate the serviceability of a facility that has been planned but not yet built, such as one for which single-line drawings and outline specifications have been prepared.
1.5 This classification indicates what would cause a facility to be rated at a certain level of serviceability but does not state how to conduct a serviceability rating nor how to assign a serviceability score. That information is found in Practice E2334. The scales in this classification are complimentary to and compatible with Practice E2334. Each requires the other.
FIG. 1 Scale A.14.1 for Public Transportation (Urban Sites)
FIG. 2 Scale A.14.2 for Staff Visits to Other Offices
FIG. 3 Scale A.14.3 for Vehicular Entry and Parking
FIG. 3Scale A.14.3 for Vehicular Entry and Parking (continued)
FIG. 4 Scale A.14.4 for Wayfinding to Building and Lobby
FIG. 4Scale A.14.4 for Wayfinding to Building and Lobby (continued)
FIG. 5 Scale A.14.5 for Capacity of Internal Movement Systems
FIG. 5Scale A.14.5 for Capacity of Internal Movement Systems (continued)
FIG. 6 Scale A.14.6 for Public Circulation and Wayfinding in Building
FIG. 6Scale A.14.6 for Public Circulation and Wayfinding in Building (continued)
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
E631 Terminology of Building Constructions
E1679 Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E2334 Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
ISO DocumentISO6240 International Standard, Performance Standards in Building--Contents and Presentation
ICS Number Code 35.260 (Office machines)
UNSPSC Code 72101500(Building maintenance and repair services)