1.1 This terminology defines terms related to the compatibility and sensitivity of materials in oxygen enriched atmosphere. It includes those standards under the jurisdiction of ASTM Committee G04.
1.2 The terminology concentrates on terms commonly encountered in and specific to practices and methods used to evaluate the compatibility and sensitivity of materials in oxygen. This evaluation is usually performed in a laboratory environment, and this terminology does not attempt to include laboratory terms.
2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.
D2863 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
G63 Guide for Evaluating Nonmetallic Materials for Oxygen Service
G72 Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
G74 Test Method for Ignition Sensitivity of Materials to Gaseous Fluid Impact
G86 Test Method for Determining Ignition Sensitivity of Materials to Mechanical Impact in Ambient Liquid Oxygen and Pressurized Liquid and Gaseous Oxygen Environments
G88 Guide for Designing Systems for Oxygen Service
G93 Practice for Cleaning Methods and Cleanliness Levels for Material and Equipment Used in Oxygen-Enriched Environments
G94 Guide for Evaluating Metals for Oxygen Service
G114 Practices for Evaluating the Age Resistance of Polymeric Materials Used in Oxygen Service
G120 Practice for Determination of Soluble Residual Contamination by Soxhlet Extraction
G121 Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
G122 Test Method for Evaluating the Effectiveness of Cleaning Agents
G124 Test Method for Determining the Combustion Behavior of Metallic Materials in Oxygen-Enriched Atmospheres
G125 Test Method for Measuring Liquid and Solid Material Fire Limits in Gaseous Oxidants
G127 Guide for the Selection of Cleaning Agents for Oxygen Systems
G128 Guide for Control of Hazards and Risks in Oxygen Enriched Systems
G131 Practice for Cleaning of Materials and Components by Ultrasonic Techniques
G136 Practice for Determination of Soluble Residual Contaminants in Materials by Ultrasonic Extraction
G144 Test Method for Determination of Residual Contamination of Materials and Components by Total Carbon Analysis Using a High Temperature Combustion Analyzer
G145 Guide for Studying Fire Incidents in Oxygen Systems
Compatibility; Oxygen-enriched systems/environments; Sensitivity criterion/response; Terminology;
ICS Number Code 01.040.13 (Environment and health protection. Safety (Vocabularies)); 13.230 (Explosion protection)
ASTM International is a member of CrossRef.
Citing ASTM Standards
[Back to Top]