Aug 03, 2016

A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification (C1782/C1782M, Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48 in.

 “There have been some notable paving slab failures over the years in part due to poor pavement design and also lack of product standards,” said ASTM member David R. Smith, Technical Director at the Interlocking Concrete Pavement Institute. “C1782 provides a baseline acceptance standard using any of three manufacturing processes: dry cast, wet cast, and hydraulically pressed.”

According to Smith, the standard fills a gap for these products. Due to their larger size, paving slabs do not fall under the existing ASTM standard for interlocking concrete paving units (C936). C1782 now provides a set of requirements that producers can meet which uses familiar ASTM terms and references. The standard was developed by paving slab manufacturers, material suppliers, testing labs, and other experts in ASTM International’s Committee on Manufactured Masonry Units (C15).

Architects, civil engineers, and landscape architects will benefit most from the specification, using it when writing construction specifications. Paving slab manufacturers will use the standard to promote products that meet or exceed its requirements. The standard will also give concrete testing labs the opportunity to provide an additional service in testing paving slabs.

To purchase standards, visit and search by the standard designation, or contact ASTM Customer Relations (tel +1.877.909.ASTM; sales@astm.org). ASTM welcomes participation in the development of its standards. Become a member at www.astm.org/JOIN.

For more news in this sector, visit www.astm.org/sn-construction.

ASTM Committee C15 on Manufacturing Masonry Units Next Meeting: Dec. 6-8, 2016, December Committee Week, Orlando, Fla.
Media Inquiries: Dan Bergels, tel +1.610.832.9602; dbergels@astm.org
Technical Contact: David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org
ASTM Staff Contact: Krista Robbins, tel +1.610.832.9689; krobbins@astm.org
 

Release #10145