Using Artificial Intelligence (AI) on ASTM standards and related intellectual property is prohibited. Violations will result in suspension of access.
Menu
Home
About ASTM
Membership & Participation
Standards & Solutions
News
Help
FAQ
Cart
Loading...
Loading...
Menu
Home
About ASTM
Membership & Participation
Standards & Solutions
News
Help
FAQ
Home
Membership & Participati…
/
Technical Committees
/
Subcommittee D20.30 on T…
Subcommittee D20.30 on Thermal Properties
Loading...
Matching Standards Under the Jurisdiction of D20.30 by Status
Active
30 matching standards
D3364-99(2019) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
-See also WK89211 proposed Reapproval
-See also
WK90133
proposed Revision
D4804-25 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
-See also
WK92857
proposed Revision
D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
-See also
WK92848
proposed Revision
D696-24 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and +30°C with a Vitreous Silica Dilatometer
D731-22 Standard Test Method for Molding Index of Thermosetting Molding Powder
D746-24 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
-See also WK85280 proposed Revision
D1238-23a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
-See also
WK84085
proposed Revision
-See also
WK89446
proposed Revision
D1525-25 Standard Test Method for Vicat Softening Temperature of Plastics
-See also WK85286 proposed Revision
D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics
D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
D2863-23e1 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
D3014-25 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
-See also WK92336 proposed Revision
D3123-25 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
-See also WK93683 proposed Reapproval with Editorial Change
D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
D3675-25 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
-See also WK92790 proposed Revision
-See also WK92789 proposed Revision
D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
-See also
WK92665
proposed Revision
D3835-24 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
-See also
WK94482
proposed Revision
D3895-19 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
-See also
WK93241
proposed Revision
D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
-See also
WK92666
proposed Revision
D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
-See also
WK92667
proposed Revision
D5422-25 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
-See also
WK93904
proposed Revision
D5930-25 Standard Test Method for Thermal Conductivity of Plastics by Transient Line-Source Technique
-See also
WK87466
proposed Revision
D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
-See also WK93737 proposed Revision
-See also
WK96176
proposed Revision
-See also WK87880 proposed Revision
-See also
WK93738
proposed Revision
D8540-23 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position Using a Dry Bath
D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
-See also
WK92668
proposed Revision
D5132-25 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
Proposed New
0 matching standards
Withdrawn, Replaced
4 matching standards
D4205-93(1994)e1 Guide for For Flammability and Combustion Testing of Rubber and Rubber-Like Materials (Withdrawn 1997)
D621-64(1988)e1 Test Methods for Deformation of Plastics Under Load
D3417-99 Standard Test Method for Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (Withdrawn 2004)
D3814-06 Standard Guide for Locating Combustion Test Methods for Polymeric Materials (Withdrawn 2012)
