Subcommittee F04.15 on Material Test Methods
Matching Standards Under the Jurisdiction of F04.15 by Status
- F561-19 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
- F1089-24 Standard Test Method for Corrosion of Surgical Instruments
- -See also WK84140 proposed Revision
- F1160-14(2017)e1 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
- -See also WK93294 proposed Revision
- F1801-20 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials
- F2082/F2082M-23 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
- F2102-17 Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants
- -See also WK94871 proposed Reapproval
- F2119-24 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants
- -See also WK91897 proposed Revision
- F2129-24 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
- -See also WK93731 proposed Revision
- -See also WK88357 proposed Revision
- F2182-19e2 Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
- -See also WK77097 proposed Revision
- F2214-23 Standard Test Method for
In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE) - F2258-24 Standard Test Method for Strength Properties of Tissue Adhesives in Tension
- F2381-19 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
- F2503-23e1 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
- F3044-20 Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants
- F2537-23 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
- -See also WK84193 proposed Revision
- F2625-24 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
- F2754/F2754M-21 Standard Test Method for Measurement of Camber, Cast, Helix, and Direction of Helix of Coiled Wire
- F2778-09(2020) Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
- -See also WK94870 proposed Reapproval
- F2847-17 Standard Practice for Reporting and Assessment of Residues on Single-Use Implants and Single-Use Sterile Instruments
- -See also WK80669 proposed Revision
- F2977-20 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants
- -See also WK94872 proposed Reapproval
- F2995-24 Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids
- F3208-20 Standard Guide for Selecting Test Soils for Validation of Cleaning Methods for Reusable Medical Devices
- F3260-18 Standard Test Method for Determining the Flexural Stiffness of Medical Textiles
- -See also WK91119 proposed Revision
- F3268-18a Standard Guide for
in vitro Degradation Testing of Absorbable Metals - -See also WK73273 proposed Revision
- F3275-22 Standard Guide for Using a Force Tester to Evaluate Performance of a Brush Part Designed to Clean the Internal Channel of a Medical Device
- F3321-19 Standard Guide for Methods of Extraction of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
- -See also WK92357 proposed Revision
- F3335-20 Standard Guide for Assessing the Removal of Additive Manufacturing Residues in Medical Devices Fabricated by Powder Bed Fusion
- F3438-24 Standard Guide for Detection and Quantification of Cleaning Markers (Analytes) for the Validation of Cleaning Methods for Reusable Medical Devices
- F640-23 Standard Test Methods for Determining Radiopacity for Medical Use
- F732-17 Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
- -See also WK94511 proposed Reapproval
- F746-04(2021) Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
- F897-19 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
- F1044-05(2017)e1 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
- -See also WK93293 proposed Revision
- F1147-24 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
- F1635-24 Standard Test Method for
in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants - -See also WK83841 proposed Revision
- F1978-22 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
- F2003-02(2022) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene After Gamma Irradiation in Air
- F2004-24 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
- -See also WK92855 proposed Revision
- F2052-21 Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
- -See also WK88170 proposed Revision
- F2118-14(2020) Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
- -See also WK90701 proposed Revision
- F2213-17 Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
- -See also WK86536 proposed Revision
- F2255-24 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
- F2256-24 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
- F2392-24 Standard Test Method for Burst Strength of Surgical Sealants
- F2458-05(2024) Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
- F2459-24 Standard Test Method for Extracting Residue from Medical Components and Quantifying via Gravimetric Analysis
- -See also WK65928 proposed Revision
- F2516-22 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
- F2819-24 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing, and Wire to be Used for Medical Devices
- F3109-23 Standard Practice for Verification of Multi-Axis Force Measuring Platforms
- F3127-22 Standard Guide for Validating Cleaning Processes Used During the Manufacture of Medical Devices
- F3276-22 Standard Guide for Using a Force Tester to Evaluate the Performance of a Brush Part Designed to Clean the External Surface of a Medical Device
- F3293-18 Standard Guide for Application of Test Soils for the Validation of Cleaning Methods for Reusable Medical Devices
- -See also WK92356 proposed Revision
- F3306-19 Standard Test Method for Ion Release Evaluation of Medical Implants
- -See also WK70758 proposed Revision
- F3336-22 Standard Practice for Lipid Preconditioning of Ultra-High-Molecular-Weight Polyethylene for Accelerated Aging
- F3357-19 Standard Guide for Designing Reusable Medical Devices for Cleanability
- -See also WK92894 proposed Revision
- F3487-20 Standard Guide for Assessing the Service Life of a Brush Part Intended to Clean a Medical Device
- F3602-23 Standard Guide for Assessing the Compatibility of a Cleaning Brush Part with Different Substrates Used in the Construction of Medical Devices
- F3718-24 Standard Practice for Maintaining Oxidative Capacity of Test Solutions for Degradation Screening of Non-Absorbable Polymers
- WK78278 the Accelerated Degradation of Hydrolysable Absorbable Polymers
- WK70410 Formula for a Cleaning Agent Intended to Clean Clinically-Used Stainless Steel Medical Device Soiled with Dried Blood
- WK88083 Maintaining oxidative capacity of test solutions for degradation screening of non-absorbable polymers
- WK82200 Assessing Non-Implanted Items for Safety in the Magnetic Resonance Environment Outside an MR System
- WK86632 medical device schematics to aid in cleaning
- WK83979 Corrosion Fatigue Evaluation of Absorbable Metals
- WK80475 Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices: Simulated In-vivo conditions
- WK92947 Content and Format of Test Report Summaries for Medical and Surgical Materials and Device Standards
- WK87727 Establishing cleanliness limits for single use medical devices
- F1536-95(2015)e1 Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape (Withdrawn 2021)
- F2183 Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants (Withdrawn 2017)
- F2183-02(2008) Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants (Withdrawn 2017)
- F1854-15 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants (Withdrawn 2024)
- -See also WK78770 proposed Revision
- -See also WK91692 proposed Reinstatement
- F1634 Standard Practice for
In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices (Withdrawn 2017) - F1634-95(2016) Standard Practice for
In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices (Withdrawn 2017)