Subcommittee A05.11 on Sheet Specifications
Matching Standards Under the Jurisdiction of A05.11 by Status
- A653/A653M-23 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- -See also WK94366 proposed Revision
- -See also WK94391 proposed Revision
- -See also WK93752 proposed Revision
- A792/A792M-23 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
- -See also WK93049 proposed Revision
- -See also WK94392 proposed Revision
- A875/A875M-23 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
- -See also WK94393 proposed Revision
- A917-08(2020) Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
- A1057/A1057M-08(2019) Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
- A459-24 Standard Specification for Zinc-Coated Flat Steel Armoring Tape
- -See also WK92057 proposed Revision
- A463/A463M-22 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
- -See also WK94390 proposed Revision
- -See also WK93682 proposed Revision
- A755/A755M-18(2024) Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
- -See also WK88918 proposed Reapproval
- A879/A879M-22 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- A918-06(2019) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
- A924/A924M-22a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
- -See also WK92071 proposed Revision
- A1003/A1003M-23e1 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
- A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
- -See also WK87175 proposed Revision
- A1046/A1046M-24 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
- -See also WK94394 proposed Revision
- A1063/A1063M-22 Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
- A1079-17(2023) Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
- A885/A885M-96(2002) Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe (Withdrawn 2006)
- A0308_A0308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process (Withdrawn 2015)
- A819-90 Specification for Steel Sheet, Aluminum-Coated Type 2 for Storm Sewer and Drainage Pipe (Withdrawn 1995)
- A308/A308M-10 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process (Withdrawn 2015)
- A591/A591M-98 Standard Specification for Steel Sheet, Electrolytic Zinc-Coated, for Light Coating Weight [Mass] Applications (Withdrawn 2005)