Subcommittee F17.62 on Sewer


    Showing results 1-22 of 22 matching ACTIVE standards under the jurisdiction of F17.62     F17 Home

    D2321-18 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

        See also WK15031 proposed revision

        See also WK17325 proposed revision

        See also WK64514 proposed revision

    D2680-01(2014) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

    D2729-17 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D3034-16 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    F585-16 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

    F679-16 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

    F794-03(2014) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

    F949-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

        See also WK69014 proposed revision

    F1336-15 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

    F1417-11a(2015) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

    F1675-13(2017) Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    F1732-12(2018) Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

    F1803-15(2019) Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 

    F2306/F2306M-19 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

        See also WK18405 proposed revision

        See also WK62647 proposed revision

        See also WK63026 proposed revision

    F2435-15 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

        See also WK52847 proposed revision

    F2562/F2562M-15 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

    F2658-07(2019) Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings

    F2763-16 Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2764/F2764M-19 Standard Specification for 6 to 60 in. [150 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

        See also WK60269 proposed revision

    F2881/F2881M-19 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

        See also WK60270 proposed revision

        See also WK63350 proposed revision

    F2947/F2947M-19 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

        See also WK65153 proposed revision

    F3308/F3308M-18 Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications

        See also WK64305 proposed revision

    Showing results 1-5 of 5 matching Proposed New Standards under the jurisdiction of F17.62     F17 Home

    WK32547 New Specification for 4-to 60-in. [100- to 1500-mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe Containing Recycled PE and Fittings for Gravity Flow Storm Sewer and Subsurface Drainage Applications

    WK43311 New Specification for 12- to 60-in. [300- to 1500-mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe Containing Recycled PE for Gravity Flow Storm Sewer and Subsurface Drainage Applications

    WK57929 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Fiber-Reinforced Pipe and Fittings for Non-Pressure Storm and Sanitary Sewer Applications

    WK63850 Thermoplastic Drain Basins for Storm Sewers

    WK65348 Large Diameter, 12 to 138 inch [300 to 3500 mm, Steel Reinforced Corrugated Polyethylene Pipes (SRCP)

    Showing Results 1-4 of 4 matching WITHDRAWN standards under the jurisdiction of F17.62     F17 Home

    D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings (Withdrawn 2014)

    F789-95a Standard Specification for Type PS-46 and Type PS-115 Poly(Vinyl Chloride) (PVC) Plastic Gravity Flow Sewer Pipe and Fittings (Withdrawn 2004)

    F2307-03 Standard Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter (Withdrawn 2011)

    F2762-11e1 Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications (Withdrawn 2016)