Subcommittee F17.40 on Test Methods

---

Showing results 1-31 of 31 matching ACTIVE standards under the jurisdiction of F17.40     F17 Home

D1598-15a Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

    See also WK45669 proposed revision

    See also WK62715 proposed revision

    See also WK74839 proposed revision

    See also WK76548 proposed revision

D1599-18 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

    See also WK56052 proposed revision

D2122-16 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

    See also WK75236 proposed revision

D2290-19a Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

D2412-21 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

    See also WK74308 proposed revision

D2444-21 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

    See also WK63180 proposed revision

    See also WK74148 proposed revision

D2837-21 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

    See also WK67139 proposed revision

    See also WK72979 proposed revision

    See also WK72981 proposed revision

    See also WK73941 proposed revision

F610/F610M-21 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique

    See also WK75235 proposed revision

F725-03(2018) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards

F1057-19 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

    See also WK76524 proposed revision

F1365-91(2018) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals

F1429-99(2014) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell

F1473-18 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

    See also WK62684 proposed revision

F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

F1802-15 Standard Test Method for Performance Testing of Excess Flow Valves

    See also WK52924 proposed revision

F2023-15 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water

    See also WK67753 proposed revision

F2136-18 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

F2164-18 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure

    See also WK75833 proposed revision

F2231-02(2019) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes

F2261-06(2018) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type.

F2263-14(2019) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

F2331-11(2021) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials

F2433-05(2018) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness

F2634-15 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

F2657-21 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing

    See also WK20865 proposed revision

    See also WK72143 proposed revision

    See also WK77054 proposed revision

F2786-16(2021) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)

F2928-18 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

F3058-16(2021) Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines

F3181-16 Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post- Consumer Recycled HDPE

F3183-16 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint

    See also WK74857 proposed revision

F3203-19 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing

Showing results 1-8 of 8 matching Proposed New Standards under the jurisdiction of F17.40     F17 Home

WK21887 New Test Method for Evaluating the Oxidative Resistance of Polypropylene (PP) Piping and Systems to Hot Chlorinated Water

WK26568 New Practice for In-Field Tensile Testing of Polyethylene (MDPE and HDPE) Butt-Fused Joints

WK47801 New Test Method for In-field Tensile Testing of Polyethylene (PE) Butt-Fused Joints

WK66288 Evaluating the Oxidative Resistance of Polypropylene (PP) Piping Systems to Hot Chlorinated Water

WK72126 Hydraulic Friction Factor Testing of Thermoplastic Pipe used in Gravity Flow Applications.

WK72127 Determination of Longitudinal Flexibility for Single Wall and Lined Corrugated Thermoplastic Pipe.

WK74970 Evaluation of the Extent of Oxidation in Polyolefin Piping by Using Infrared Spectroscopy to Determine a Ketone Carbonyl Index.

WK76995 Field Leak Testing of Polyamide-12 (PA12) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)

Showing Results 1-8 of 8 matching WITHDRAWN standards under the jurisdiction of F17.40     F17 Home

D6070-02(2010) Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable (Withdrawn 2016)

F699-00e1 Standard Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing (Withdrawn 2005)

F948-94(2011) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow (Withdrawn 2018)

F1248-96(2002)e1 Standard Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe (Withdrawn 2007)

F1474-98(2001) Standard Test Method for Slow Crack Growth Resistance of Notched Polyethylene Plastic Pipe (Withdrawn 2003)

F1589-95(2001) Standard Test Method for Determination of the Critical Pressure for Rapid Crack Propagation in Plastic Pipe (Withdrawn 2003)

F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens (Withdrawn 2019)

F2330-04 Standard Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water (Withdrawn 2010)