Subcommittee F17.26 on Olefin Based Pipe

---

Showing results 1-19 of 19 matching ACTIVE standards under the jurisdiction of F17.26     F17 Home

D2239-12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing

D3035-15 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

D3485-15 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)

F714-13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

    See also WK52378 proposed revision

F876-17 Standard Specification for Crosslinked Polyethylene (PEX) Tubing

    See also WK26305 proposed revision

    See also WK41377 proposed revision

    See also WK43935 proposed revision

    See also WK45807 proposed revision

    See also WK55200 proposed revision

F894-13 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

F1533-01(2009) Standard Specification for Deformed Polyethylene (PE) Liner

    See also WK60602 proposed revision

F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

F2160-16 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

F2623-14 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing

    See also WK49782 proposed revision

    See also WK53540 proposed revision

F2649-14 Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

F2736-13e1 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe

    See also WK59964 proposed revision

F2737-11(2017) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units

F2769-16 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

    See also WK47299 proposed revision

    See also WK53541 proposed revision

    See also WK58193 proposed revision

F2788/F2788M-15 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe

    See also WK48697 proposed revision

    See also WK53948 proposed revision

    See also WK55958 proposed revision

F2987-12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications

F3034-15 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)

    See also WK44097 proposed revision

F3123-16 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)

Showing results 1-3 of 3 matching Proposed New Standards under the jurisdiction of F17.26     F17 Home

WK32617 New Specification for Black, Metric-Sized Crosslinked Polyethylene (PEX) Pipe

WK57078 Metric- and Inch-Sized Cross-Linked Polyethylene (PEX) Pipe Using the Minimum Required Strength (MRS) Pressure Rating Method

WK56697 Procedures to Prevent Contamination in Polyethylene Pipe and Fittings

Showing Results 1-7 of 7 matching WITHDRAWN standards under the jurisdiction of F17.26     F17 Home

D2104-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedule 40 (Withdrawn 2010)

D2447-03 Standard Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter (Withdrawn 2010)

D2662-96a Standard Specification for Polybutylene (PB) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter (Withdrawn 2003)

D2666-96a Standard Specification for Polybutylene (PB) Plastic Tubing (Withdrawn 2005)

D3000-95ae1 Standard Specification for Polybutylene (PB) Plastic Pipe (SDR-PR) Based on Outside Diameter (Withdrawn 2003)

F809/F809M-95e1 Standard Specification for Large Diameter Polybutylene Plastic Pipe (Withdrawn 2006)

F892-95 Specification for Polyethylene (PE) Corrugated Pipe With a Smooth Interior and Fittings (Withdrawn 2001)