Subcommittee F17.20 on Joining

---

Showing results 1-24 of 24 matching ACTIVE standards under the jurisdiction of F17.20     F17 Home

D2235-04(2016) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

D2564-12(2018) Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

    See also WK65748 proposed revision

D2657-07(2015) Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

D2672-14 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

D2855-15 Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

D3122-15 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

D3138-04(2016) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

D3139-19 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

    See also WK52208 proposed revision

    See also WK67961 proposed revision

    See also WK69793 proposed revision

D3212-07(2013) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

    See also WK71490 proposed revision

F402-18 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

F477-14 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    See also WK37246 proposed revision

F493-14 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

F656-15 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

F913-02(2014) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

F1056-18 Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

F1290-19 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

F1674-18 Standard Test Method for Joint Restraint Products for Use with PVC Pipe

F2487-13(2017) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines

F2510/F2510M-17 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes

    See also WK61308 proposed revision

F2620-19 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

    See also WK69030 proposed revision

    See also WK70960 proposed revision

F2946-12(2017) Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

F3124-15e1 Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings

F3190-16 Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings

F3328-18 Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

Showing results 1-6 of 6 matching Proposed New Standards under the jurisdiction of F17.20     F17 Home

WK47946 One-Step (Solvent Cement) Method of Joining Poly(Vinyl Chloride) (PVC) or Chlorinated Poly(Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

WK61117 Electrofusion Joining Polyethylene (PE) Pipe and Fittings for Pressure Pipe Service

WK62968 Butt Fusion Joining of PE pipe and Fittings Suitable for Subsequent Cross-linking

WK63071 Vacuum-Assisted Heat Fusion Joining of Polyethylene (PE) Saddle Fittings to Polyethylene (PE) Plastic Pipe

WK63167 Butt Fusion Joining of PA12 Pipe and Fittings

WK63211 Heat fusion joining of polypropylene (PP) pipe and fittings

Showing Results 1-2 of 2 matching WITHDRAWN standards under the jurisdiction of F17.20     F17 Home

D3140-90 Standard Practice for Flaring Polyolefin Pipe and Tubing (Withdrawn 1999)

F545-95 Specification for PVC and ABS Injected Solvent Cemented Plastic Pipe Joints (Withdrawn 2001)