Work Item
ASTM WK70807

New Practice for the On-Site Inspection of Installed Board and Wrap Type Fireproofing

1. Scope

This Practice provides a standard set of guidelines for conducting and reporting on inspections of installed board and wrap type fireproofing materials applied to structural steel or other substrates. This Practice establishes procedures to inspect products and systems, including methods for field verification and inspection. This Practice addresses all types of board and wrap type materials applied to structural steel and other substrates. This Practice provides an inspector, employed by an inspection agency, various methods to verify that required board and wrap type fireproofing materials have been installed to the tested and listed system and manufacturers installation instructions in addition to project requirements.


Insulation; Fireproofing; Structural Steel Fireproofing


Currently, there is no document that has been produced in the industry that is a consensus of the fireproofing industry manufacturers and contractors. The ASTM Standard proposed creates a key document that has been developed by manufacturers, contractors AND those inspection agencies that provide fireproofing inspections. ASTMs new document will provide in mandatory code acceptable language the method to inspect board and wrap type fireproofing systems. Architects will specify this standard as the inspections are mandated by Chapter 17 of the International Building Code.

The title and scope are in draft form and are under development within this ASTM Committee.


Developed by Subcommittee: E06.21

Committee: E06

Staff Manager: Frank McConnell

Work Item Status

Date Initiated: 11-25-2019

Technical Contact: Samantha Peterson

Item: 002

Ballot: E06.21 (22-01)

Status: Will Reballot Item