Using Artificial Intelligence (AI) on ASTM standards and related intellectual property is prohibited. Violations will result in suspension of access.
Menu
Home
About ASTM
Membership & Participation
Standards & Solutions
News
Help
FAQ
Cart
Loading...
Loading...
Menu
Home
About ASTM
Membership & Participation
Standards & Solutions
News
Help
FAQ
Home
Membership & Participati…
/
Technical Committees
/
Subcommittee F09.30 on L…
Subcommittee F09.30 on Laboratory (Non-Vehicular) Testing
Loading...
Matching Standards Under the Jurisdiction of F09.30 by Status
Active
14 matching standards
F414-21 Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
F421-15(2021) Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
F724-23 Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
F762/F762M-08(2020)e1 Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
F870-23 Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
F1016-07(2020) Standard Practice for Linear Tire Treadwear Data Analysis
F1112-06A(2018)e1 Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
F1502-23 Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
F1971-12(2018) Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
F2663-21a Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires
F2779-24 Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
F2838-25 Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
-See also
WK95100
proposed Revision
F2869-24 Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
F3015-21 Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
Proposed New
0 matching standards
Withdrawn, Replaced
0 matching standards
Subcommittee F09.30 on Laboratory (Non-Vehicular) Testing | ASTM
