Subcommittee D04.26 on Fundamental/Mechanistic Tests

Matching Standards Under the Jurisdiction of D04.26 by Status

D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
-See also WK93182 proposed Revision
D8237-21 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
-See also WK85663 proposed Revision
D7313-20 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
-See also WK93261 proposed Revision
D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer
D8044-23 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
-See also WK84100 proposed Reapproval with Editorial Change
-See also WK84095 proposed Revision
D6931-24 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature
-See also WK93170 proposed Revision
-See also WK83940 proposed Revision
D8303-20 Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain
-See also WK93195 proposed Revision
D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test
D8541-24 Standard Test Method for Determination of Relative Rotation to Evaluate the Workability of Asphalt Mixture Using Wireless Particle-Size Sensors
D8360-22 Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test

WK72263 Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend (SCB) Test at Intermediate Temperatures Fabricated by a 100 mm Marshall Hammer
WK71095 Preparation of Asphalt Mixture Samples for Performance-Related Testing
WK86870 Determination of Rutting Resistance Using High Temperature Indirect Tensile (HT-IDT) Strength of Asphalt Mixtures
WK87316 Determining the Susceptibility of Asphalt Mixtures to Cracking Using the Overlay Tester
WK95270 AI-Powered IDEAL-E* Test
WK89666 Tensile Creep Compliance and Tensile Failure Limits of Asphalt Mixtures Using the Superpave Indirect Tension (IDT) Test

Subcommittee D04.26 on Fundamental/Mechanistic Tests

Matching Standards Under the Jurisdiction of D04.26 by Status

Active11 matching standards

Proposed New6 matching standards

Withdrawn, Replaced9 matching standards

Matching Standards Under the Jurisdiction of D04.26 by Status

Active11 matching standards

Proposed New6 matching standards

Withdrawn, Replaced9 matching standards