Subcommittee F17.10 on Fittings Matching Standards Under the Jurisdiction of F17.10 by Status Active 32 matching standards
D2683-20 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing F2159-23a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing F1733-24 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe -See also WK90553 proposed Revision D2464-23 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 -See also WK84608 proposed Reapproval D2466-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 D2467-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 D2609-24 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe D2749-22 Standard Symbols for Dimensions of Plastic Pipe Fittings -See also WK81846 proposed Reinstatement D3261-24 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing F437-24 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 F438-23 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40 F439-24 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80 F1055-16a(2022) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing -See also WK84088 proposed Revision -See also WK10401 proposed Revision F1498-08(2020) Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings -See also WK94595 proposed Revision F1960-24 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing F1970-24 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems -See also WK94409 proposed Revision -See also WK89871 proposed Revision F2080-23 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe F1807-23 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing F2098-24 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings -See also WK94187 proposed Revision F2206-19(2024) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) F2434-19 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing F2735-23 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing F2829/F2829M-21 Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe F2854-21 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing F2880-21 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 3 4 in. to 65 in. -See also WK76932 proposed Revision F3202-24 Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping F3348-23a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing -See also WK95152 proposed Revision F3373-21 Standard Specification for Polyethylene (PE) Electrofusion Fittings for Outside Diameter Controlled Crosslinked Polyethylene (PEX) Pipe F3525/F3525M-21 Standard Specification Fabricated Fittings of Crosslinkable Polyethylene (CX-PE) F3347-23 Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing -See also WK95151 proposed Revision F3536-22 Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
Proposed New 4 matching standards
WK75153 Polyethylene (PE) Pressure Pipe Bends (Elbows) in Nominal Diameters 8-inch to 36-inch (219mm 915mm), Fabricated From Thick Wall Gore-Pipe by Heat Fusion Joining of Miter-cut or Machined Segments, or by Thermo-Forging WK63070 Polyethylene (PE) Saddle Fittings for Vacuum-Assisted Heat Fusion Joining to Polyethylene (PE) Plastic Pipe WK94897 Standard Specification for Polyethylene (PE) Mechanical Joint (MJ) Adapter WK93040 Oriented Poly(Vinyl Chloride), PVCO, Pressure Fittings
Withdrawn, Replaced 9 matching standardsSubcommittee F17.10 on Fittings | ASTM