Subcommittee G01.06 on Environmentally Assisted Cracking | ASTM

Subcommittee G01.06 on Environmentally Assisted Cracking

Matching Standards Under the Jurisdiction of G01.06 by Status

G30-22 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
G35-23 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
-See also WK90604 proposed Revision
G36-24 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
G37-98(2021) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
-See also WK95572 proposed Reapproval
G38-01(2021) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
G41-24 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
-See also WK85726 proposed Withdrawal
G44-21 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution
G47-22 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
-See also WK94912 proposed Revision
G49-85(2023)e1 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
G58-85(2023) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
G64-99(2021) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
G103-97(2023)e1 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution
G123-00(2022)e1 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution
G129-21 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking
G139-05(2022) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method
G142-98(2022) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
G168-17 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
-See also WK91583 proposed Revision
G186-05(2021) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
G188-05(2021) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys