Subcommittee E37.10 on Fundamental, Statistical and Mechanical Properties

---

Showing results 1-25 of 25 matching ACTIVE standards under the jurisdiction of E37.10     E37 Home

E831-19 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis

E1363-18 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers

    See also WK64388 proposed revision

E1545-11(2016) Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

E1640-18 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis

E1824-19 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method

E1860-13(2018) Standard Test Method for Elapsed Time Calibration of Thermal Analyzers

E1867-18 Standard Test Methods for Temperature Calibration of Dynamic Mechanical Analyzers

    See also WK71555 proposed revision

E1877-17 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data

    See also WK61157 proposed revision

E1952-17 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

    See also WK73053 proposed withdrawal

E1953-20 Standard Practice for Description of Thermal Analysis and Rheology Apparatus

    See also WK66113 proposed revision

E1970-16 Standard Practice for Statistical Treatment of Thermoanalytical Data

E2071-00(2015) Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data

    See also WK72218 proposed revision

E2092-18a Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

    See also WK64381 proposed revision

E2113-18 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers

E2206-11(2015) Standard Test Method for Force Calibration of Thermomechanical Analyzers

    See also WK72231 proposed revision

E2253-16 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters

E2254-18 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers

E2347-16 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis

E2402-19 Standard Test Method for Mass Loss, Residue, and Temperature Measurement Validation of Thermogravimetric Analyzers

E2425-16 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers

E2551-20 Standard Test Methods for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

    See also WK66084 proposed revision

E2744-16e1 Standard Test Method for Pressure Calibration of Thermal Analyzers

E2769-18 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

    See also WK69799 proposed revision

E2918-18a Standard Test Method for Performance Validation of Thermomechanical Analyzers

    See also WK64940 proposed revision

E3142-18a Standard Test Method for Thermal Lag of Thermal Analysis Apparatus

Showing results 1-3 of 3 matching Proposed New Standards under the jurisdiction of E37.10     E37 Home

WK69425 Time-Temperature Superpositioning of DMA and Rheometer Data

WK72473 Temperature Calibration of Dynamic Mechanical Analyzers Using Thermal Lag

WK73222 Shear Modulus of Amorphous Polymers using DMA or Rheology

Showing Results 1-1 of 1 matching WITHDRAWN standards under the jurisdiction of E37.10     E37 Home

E2039-04 Standard Test Method for Determining and Reporting Dynamic Dielectric Properties (Withdrawn 2009)