Subcommittee E07.06 on Ultrasonic Method


    Showing results 1-40 of 40 matching ACTIVE standards under the jurisdiction of E07.06     E07 Home

    B594-19 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

        See also WK64435 proposed revision

    C1331-18 Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method

    C1332-18 Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique

    E114-15 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E127-15 Standard Practice for Fabrication and Control of Aluminum Alloy Ultrasonic Standard Reference Blocks

        See also WK64254 proposed revision

    E164-19 Standard Practice for Contact Ultrasonic Testing of Weldments

    E213-14e1 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

        See also WK66643 proposed revision

    E273-15 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

    E317-16 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E428-08(2013) Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

        See also WK69031 proposed withdrawal with replacement

    E494-15 Standard Practice for Measuring Ultrasonic Velocity in Materials

    E587-15 Standard Practice for Ultrasonic Angle-Beam Contact Testing

    E664/E664M-15 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

    E797/E797M-15 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

    E1001-16 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

    E1065/E1065M-14 Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

        See also WK65853 proposed revision

    E1158-14 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

        See also WK69032 proposed withdrawal with replacement

    E1324-16 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

    E1774-17 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

    E1816-18 Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods

    E1901-18 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

    E1961-16 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

    E1962-14 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

        See also WK64093 proposed revision

    E2001-18 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

    E2192-13(2018) Standard Guide for Planar Flaw Height Sizing by Ultrasonics

    E2223-13(2018)e1 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

    E2373/E2373M-14 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

        See also WK69517 proposed revision

    E2375-16 Standard Practice for Ultrasonic Testing of Wrought Products

    E2479-16 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

    E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

    E2534-15 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    E2580-17 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2700-14 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

        See also WK66687 proposed revision

    E2904-17 Standard Practice for Characterization and Verification of Phased Array Probes

    E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy

    E3044/E3044M-16e1 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints

    E3081-16 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts

    E3167/E3167M-18 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints

    E3170/E3170M-18 Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints

    E3213-19 Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    Showing results 1-1 of 1 matching Proposed New Standards under the jurisdiction of E07.06     E07 Home

    WK64276 Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    Showing Results 1-1 of 1 matching WITHDRAWN standards under the jurisdiction of E07.06     E07 Home

    E1315-93(2002) Standard Practice for Ultrasonic Examination of Steel with Convex Cylindrically Curved Entry Surfaces (Withdrawn 2007)