Subcommittee E06.53 on Materials and Processes for Durable Rigidwall Relocatable Structures


    Showing results 1-30 of 30 matching ACTIVE standards under the jurisdiction of E06.53     E06 Home

    E864-12 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

    E865-12 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

    E866-19 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

        See also WK67588 proposed revision

    E874-19 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels

        See also WK67591 proposed revision

    E990-13 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels

    E1091-13 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

    E1307-18 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

    E1555-12 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

    E1556-12 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

    E1730-19 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

        See also WK67600 proposed revision

    E1749-18 Standard Terminology Relating to Rigid Wall Relocatable Shelters

    E1773-18 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

    E1793-19 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters

        See also WK67595 proposed revision

    E1794-13 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels

    E1800-13 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels

    E1801-15 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

    E1826-12 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded

    E1851-15 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures

    E1925-18 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures

    E1974-19 Standard Specification for Shelter, Electrical Equipment S-250/G

        See also WK64458 proposed revision

    E1975-18 Standard Specification for Shelter, Electrical, Equipment S-280/G

    E1976-19 Standard Specification for Shelter, Tactical, Nonexpandable

        See also WK64457 proposed revision

    E1977-18 Standard Specification for Shelter, Tactical, Expandable, One-Side

    E1978-18 Standard Specification for Shelter, Tactical, Expandable, Two-Side

    E2004-18 Standard Test Method for Facing Cleavage of Sandwich Panels

    E2377-18 Standard Specification for Shelter, Electrical Equipment, Lightweight

    E2462-18 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I

    E2463-19 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II

        See also WK67596 proposed revision

    E2517-13 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)

    E2518-19 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)

        See also WK67599 proposed revision

    0 matching Proposed New Standards under the jurisdiction of E06.53     E06 Home

    0 matching WITHDRAWN standards under the jurisdiction of E06.53     E06 Home