Subcommittee D35.03 on Permeability and Filtration


    Showing results 1-23 of 23 matching ACTIVE standards under the jurisdiction of D35.03     D35 Home

    D4491/D4491M-17 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

    D4716/D4716M-14 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

    D4751-16 Standard Test Methods for Determining Apparent Opening Size of a Geotextile

    D5101-12(2017) Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

    D5141-11 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device

        See also WK55914 proposed revision

    D5199-12 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

    D5493-06(2016) Standard Test Method for Permittivity of Geotextiles Under Load

    D5567-94(2011) Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

        See also WK60507 proposed withdrawal

    D6088-06(2016) Standard Practice for Installation of Geocomposite Pavement Drains

    D6140-00(2014) Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications

    D6523-00(2014)e1 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

    D6574/D6574M-13e1 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow

    D6767-16 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test

        See also WK41930 proposed revision

    D6917-16 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

    D6918-09(2014)e1 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition

    D7178-16e1 Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property

    D7180/D7180M-05(2013)e1 Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

    D7498/D7498M-09(2014)e1 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test

    D7557/D7557M-09(2013)e1 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens

    D7701-11 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag

    D7880/D7880M-13 Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag

        See also WK58384 proposed revision

    D7931-17 Standard Guide for Specifying Drainage Geocomposites

    D8057-17 Standard Specification for Inlet Filters with a Rigid Frame

    Showing results 1-7 of 7 matching Proposed New Standards under the jurisdiction of D35.03     D35 Home

    WK44902 New Test Method for Measuring the air transmissivity of drainage geocomposites

    WK42293 New Test Method for Proposed ASTM Standard Test Method for Determination of Geotextile Filter Clogging Potential by the Flexible Wall Gradient Ratio

    WK45326 New Specification for Geosynthetic Inlet Filters

    WK60778 Guide for the Application of the Characteristic Flow Equation to ASTM Hydraulic Testing Standards

    WK54650 SLURRY ABRASION RESISTANCE OF GEOTEXTILES (ROTATING DRUM METHOD)

    WK55003 Determining the Effective Flow Rate per Unit Width and Effective Hydraulic Transmissivity of Multi-Linear Drainage Geocomposites.

    WK60702 DETERMINING RELATIVE (PERCENT) OPEN AREA OF A WOVEN GEOTEXTILE

    0 matching WITHDRAWN standards under the jurisdiction of D35.03     D35 Home