Subcommittee D02.B0 on Automotive Lubricants

---

Showing results 1-27 of 27 matching ACTIVE standards under the jurisdiction of D02.B0     D02 Home

D3524-14(2020) Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography

D4485-20 Standard Specification for Performance of Active API Service Category Engine Oils

    See also WK72230 proposed revision

D4858-13 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

    See also WK20831 proposed revision

D4859-13 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

    See also WK20832 proposed revision

D4863-13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

    See also WK20833 proposed revision

D6794-20 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time

    See also WK20807 proposed revision

D6795-19a Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

    See also WK20808 proposed revision

D6891-21 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

D6922-13(2018) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

D6923-18 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D6987/D6987M-13a Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

D7038-21a Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

    See also WK76490 proposed revision

D7156-19 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D7422-19 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

D7450-19 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

D7468-21 Standard Test Method for Cummins ISM Test

    See also WK76721 proposed revision

D7484-21b Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

    See also WK76720 proposed revision

    See also WK77838 proposed revision

D7549-21 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

D8047-19 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine

D8048-21a Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine

    See also WK77836 proposed revision

    See also WK77839 proposed revision

D8074-19 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine

D8111-21a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine

    See also WK76488 proposed revision

D8279-21 Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine

D8291-21a Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine

    See also WK76489 proposed revision

    See also WK77837 proposed revision

D8350-21 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine

F118-13 Standard Definitions of Terms Relating to Gaskets

Showing results 1-2 of 2 matching Proposed New Standards under the jurisdiction of D02.B0     D02 Home

WK18919 New Test Method for Cummins ISM Test

WK78651 Ford LSPI Oil Aging Test Procedure

Showing Results 1-2 of 2 matching WITHDRAWN standards under the jurisdiction of D02.B0     D02 Home

D4857-12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021)

D5290-91 Standard Test Method for Measurement of Oil Consumption, Piston Deposits and Wear in a Heavy-Duty High Speed Diesel Engine-NTC-400 Procedure (Withdrawn 1997)