Subcommittee D02.07 on Flow Properties


    Showing results 1-54 of 54 matching ACTIVE standards under the jurisdiction of D02.07     D02 Home

    D97-17b Standard Test Method for Pour Point of Petroleum Products

    D341-17 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products

        See also WK66543 proposed revision

    D445-19 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

        See also WK64411 proposed revision

        See also WK65006 proposed revision

        See also WK66671 proposed revision

        See also WK67930 proposed revision

        See also WK69342 proposed revision

    D446-12(2017) Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

    D2161-19 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

        See also WK66544 proposed revision

    D2162-17 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

    D2270-10(2016) Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C

    D2386-19 Standard Test Method for Freezing Point of Aviation Fuels

        See also WK65105 proposed revision

        See also WK66546 proposed revision

    D2500-17a Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels

    D2532-17 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

    D2603-19 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

        See also WK67180 proposed revision

        See also WK69760 proposed revision

    D2983-19 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

        See also WK65249 proposed revision

        See also WK69369 proposed revision

    D3829-18 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

    D4539-17 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

    D4683-17 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

        See also WK64059 proposed revision

    D4684-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4741-18 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D5133-15 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

        See also WK65096 proposed revision

    D5275-17 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

        See also WK69770 proposed revision

    D5293-17a Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

    D5481-13 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5621-19 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

        See also WK67181 proposed revision

        See also WK69769 proposed revision

    D5771-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

        See also WK59861 proposed revision

        See also WK67052 proposed revision

    D5772-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)

    D5773-17e1 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)

    D5853-17a Standard Test Method for Pour Point of Crude Oils

    D5949-16 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

    D5950-14 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

        See also WK59860 proposed revision

    D5972-16 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D5985-02(2014) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

    D6022-06(2012) Standard Practice for Calculation of Permanent Shear Stability Index

        See also WK67182 proposed revision

    D6278-17e1 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

        See also WK69771 proposed revision

    D6371-17a Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

    D6616-17 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C

    D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

    D6821-18 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

    D6892-03(2014) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

    D6895-17 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C

    D6896-18 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

    D7042-16e3 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

        See also WK55696 proposed revision

    D7109-18 Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles

        See also WK69772 proposed revision

    D7110-15 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

    D7152-11(2016) Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

    D7153-15e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

        See also WK59862 proposed revision

        See also WK69729 proposed revision

    D7154-15 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

    D7279-18 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

    D7346-15 Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels

        See also WK64274 proposed revision

    D7397-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)

    D7483-13a(2017) Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

    D7683-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)

    D7689-17 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)

        See also WK64275 proposed revision

    D7945-16 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer

        See also WK69326 proposed revision

    D8210-19a Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer

        See also WK66307 proposed revision

        See also WK69482 proposed revision

    D8278-19 Standard Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants

        See also WK69602 proposed revision

    Showing results 1-1 of 1 matching Proposed New Standards under the jurisdiction of D02.07     D02 Home

    WK66261 Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants

    Showing Results 1-4 of 4 matching WITHDRAWN standards under the jurisdiction of D02.07     D02 Home

    D3117-03 Standard Test Method for Wax Appearance Point of Distillate Fuels (Withdrawn 2010)

    D3245-03 Standard Test Method for Pumpability of Industrial Fuel Oils (Withdrawn 2010)

    D4305-98a(2004)e1 Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures (Withdrawn 2010)

    D5901-03 Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) (Withdrawn 2010)