Subcommittee C24.20 on General Test Methods


    Showing results 1-31 of 31 matching ACTIVE standards under the jurisdiction of C24.20     C24 Home

    C603-14 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C639-15 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C661-15 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C679-15 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C681-14 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C711-14 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712-14 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C731-15 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C765-97(2015) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C771-14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

    C772-03(2014) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C782-13 Standard Test Method for Softness of Preformed Tape Sealants

    C792-15 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C879-03(2014) Standard Test Methods for Release Papers Used with Preformed Tape Sealants

    C972-00(2011) Standard Test Method for Compression-Recovery of Tape Sealant

    C1016-14 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1087-16 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1183/C1183M-13 Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1241-14 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1246-17 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

        See also WK55335 proposed revision

    C1253-14 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1266-17 Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1294-15 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1681-14 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

        See also WK51712 proposed revision

    C1735-17 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C1850-17 Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems

    D2202-00(2014) Standard Test Method for Slump of Sealants

    D2203-01(2011) Standard Test Method for Staining from Sealants

        See also WK52866 proposed revision

    D2377-14 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2452-15 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453-15 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    Showing results 1-3 of 3 matching Proposed New Standards under the jurisdiction of C24.20     C24 Home

    WK36854 New Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability following a Period of Compression or Tension

    WK41753 New Test Method for Low Temperature Crack Bridging Ability of Elastomeric Wall Coatings

    WK54194 Determining the Extent of Cracking in a Sealant Using the Difference between the Compressive and Tensile Modulus

    Showing Results 1-10 of 10 matching WITHDRAWN standards under the jurisdiction of C24.20     C24 Home

    C570-00 Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction (Withdrawn 2002)

    C669-00 Standard Specification for Glazing Compounds for Back Bedding and Face Glazing of Metal Sash (Withdrawn 2002)

    C713-94(1999)e1 Standard Test Method for Slump of an Oil-Base Knife-Grade Channel Glazing Compound (Withdrawn 2002)

    C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)

    C741-93(1998) Standard Test Method for Accelerated Aging of Wood Sash Face Glazing Compound (Withdrawn 2002)

    C742-99 Standard Test Method for Degree of Set for Wood Sash Glazing Compound (Withdrawn 2002)

    C797-99 Terminology for Use of Oil- and Resin-Based Putty and Glazing Compounds (Withdrawn 2002)

    D2249-01 Standard Test Method for Predicting the Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash (Withdrawn 2002)

    D2376-00 Standard Test Method for Slump of Face Glazing and Bedding Compounds on Metal Sash (Withdrawn 2002)

    D2451-99 Standard Test Method for Degree of Set for Glazing Compounds on Metal Sash (Withdrawn 2002)