Subcommittee G01.06 on Environmentally Assisted Cracking

---

Showing results 1-20 of 20 matching ACTIVE standards under the jurisdiction of G01.06     G01 Home

G30-97(2016) Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens

    See also WK78071 proposed revision

G35-98(2015) Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids

    See also WK75578 proposed revision

G36-94(2018) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution

G37-98(2021) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys

G38-01(2021) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens

G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens

G41-90(2018) Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment

G44-21 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution

    See also WK63362 proposed revision

G47-20 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

G49-85(2019) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

G58-85(2015) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

G64-99(2021) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys

G103-97(2016) Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution

G123-00(2015) Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

G129-21 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

    See also WK63361 proposed revision

G139-05(2015) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

G142-98(2016) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

G168-17 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

G186-05(2021) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

G188-05(2021) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

0 matching Proposed New Standards under the jurisdiction of G01.06     G01 Home

0 matching WITHDRAWN standards under the jurisdiction of G01.06     G01 Home