Subcommittee E28.04 on Uniaxial Testing

    Showing results 1-16 of 16 matching ACTIVE standards under the jurisdiction of E28.04     E28 Home

    E8/E8M-16a Standard Test Methods for Tension Testing of Metallic Materials

        See also WK63544 proposed revision

    E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

        See also WK54627 proposed revision

        See also WK54628 proposed revision

        See also WK67957 proposed revision

    E21-17e1 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

        See also WK53249 proposed revision

        See also WK63721 proposed revision

        See also WK63723 proposed revision

        See also WK65808 proposed revision

        See also WK65917 proposed revision

        See also WK65918 proposed revision

        See also WK65920 proposed revision

        See also WK68330 proposed revision

    E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus

    E132-17 Standard Test Method for Poisson’s Ratio at Room Temperature

    E139-11(2018) Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E143-13 Standard Test Method for Shear Modulus at Room Temperature

        See also WK67972 proposed revision

    E209-18 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

        See also WK51468 proposed revision

        See also WK56856 proposed revision

        See also WK59648 proposed revision

        See also WK61155 proposed revision

    E238-17a Standard Test Method for Pin-Type Bearing Test of Metallic Materials

    E292-18 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

        See also WK66200 proposed revision

        See also WK69024 proposed revision

    E328-13 Standard Test Methods for Stress Relaxation Tests for Materials and Structures

        See also WK65872 proposed revision

        See also WK68270 proposed revision

    E345-16 Standard Test Methods of Tension Testing of Metallic Foil

    E633-13 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air

        See also WK65873 proposed revision

        See also WK68271 proposed revision

        See also WK68542 proposed revision

    E1450-16 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

    E1875-13 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

        See also WK65877 proposed revision

    E1876-15 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

    Showing results 1-1 of 1 matching Proposed New Standards under the jurisdiction of E28.04     E28 Home

    WK65916 Dynamic Compression of Bulk Metallic Materials using a Split Hopkinson Pressure Bar / Kolsky Bar

    0 matching WITHDRAWN standards under the jurisdiction of E28.04     E28 Home