Showing results 1-24 of 24 matching ACTIVE standards under the jurisdiction of F17.60 F17 Home
D2513-12ae1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
See also WK37322 proposed revision
See also WK37858 proposed revision
See also WK39983 proposed revision
See also WK41761 proposed revision
F689-97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
F905-04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints
F1025-94(2011) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
F1041-02(2008) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
F1563-01(2011) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
F1734-03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
F1804-08(2012) Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F1948-12 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
See also WK34573 proposed revision
F1973-12 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
See also WK33902 proposed revision
See also WK36682 proposed revision
See also WK39949 proposed revision
See also WK39952 proposed revision
See also WK39955 proposed revision
F2138-12 Standard Specification for Excess Flow Valves for Natural Gas Service
F2145-09 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
See also WK35275 proposed revision
See also WK39950 proposed revision
See also WK39953 proposed revision
See also WK39956 proposed revision
F2207-06 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
See also WK37330 proposed revision
F2509-12 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
F2619/F2619M-11 Standard Specification for High-Density Polyethylene (PE) Line Pipe
See also WK37264 proposed revision
F2767-12 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
F2785-12 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
F2817-10 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
See also WK39727 proposed revision
F2818-10 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing
F2830-11 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer
F2897-11ae1 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)
F2945-12a Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings
Showing results 1-4 of 4 matching Proposed New Standards under the jurisdiction of F17.60 F17 Home
WK33352 New Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings, and Joints For Gas Distribution Applications
WK31289 New Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings, and Joints for Oil and Gas Applications
WK38454 New Specification for Barcode Durability for PE Gas Pipe
WK39660 New Practice for Procedures to prevent contamination in plastc gas pipe and fittings.
Back to the Main Committee Page
