Technical Committees / Committee F16 /


Committee F16.02 on Steel Bolts, Nuts, Rivets and Washers


Subcommittees and Standards

Showing results 1-33 of 33 matching ACTIVE standards under the jurisdiction of F16.02     F16 Home

A31-04(2009) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

A307-12 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

A325-10 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
    See also WK37668 proposed revision

A325M-13 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
    See also WK26550 proposed revision
    See also WK37669 proposed revision

A354-11 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
    See also WK30626 proposed revision

A394-08e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
    See also WK13378 proposed revision

A449-10 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

A489-12 Standard Specification for Carbon Steel Lifting Eyes

A490-12 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
    See also WK37670 proposed revision

A490M-12 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
    See also WK37671 proposed revision

A502-03(2009) Standard Specification for Rivets, Steel, Structural

A563-07a Standard Specification for Carbon and Alloy Steel Nuts
    See also WK35343 proposed revision

A563M-07 Standard Specification for Carbon and Alloy Steel Nuts [Metric]

A574M-12 Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

A574-13 Standard Specification for Alloy Steel Socket-Head Cap Screws
    See also WK38041 proposed revision

F432-10 Standard Specification for Roof and Rock Bolts and Accessories
    See also WK38896 proposed revision

F436-11 Standard Specification for Hardened Steel Washers

F436M-11 Standard Specification for Hardened Steel Washers [Metric]

F541-12 Standard Specification for Alloy Steel Eyebolts

F835M-11 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

F835-12 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
    See also WK42290 proposed revision

F844-07a Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

F912-11 Standard Specification for Alloy Steel Socket Set Screws

F912M-11 Standard Specification for Alloy Steel Socket Set Screws (Metric)

F959M-13 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)
    See also WK36002 proposed revision
    See also WK42195 proposed revision

F959-13 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
    See also WK24926 proposed revision
    See also WK31607 proposed revision
    See also WK32403 proposed revision
    See also WK42196 proposed revision

F1554-07ae1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
    See also WK24220 proposed revision

F1852-11 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
    See also WK37672 proposed revision

F2280-12 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
    See also WK37673 proposed revision

F2437-12 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

F2482-08 Standard Specification for Load-Indicating Externally Threaded Fasteners
    See also WK42433 proposed revision

F2882-12 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength

F2882M-12 Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]


Showing results 1-4 of 4 matching Proposed New Standards under the jurisdiction of F16.02     F16 Home

WK42187 New Specification for Compressible-Washer-Type Direct Tension Indicators for Use with XTB and XTB-HX Structural Fasteners

WK42186 New Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 200 ksi Minimum Tensile Strength

WK35189 New Specification for Through-Hardened Steel Washers for Pressure Boundary Flanges

WK42185 New Specification for Twist Off Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 200 ksi Minimum Tensile Strength

A502-93 Standard Specification for Steel Structural Rivets (Withdrawn 1999)

A687-93 Standard Specification for High-Strength Nonheaded Steel Bolts and Studs (Withdrawn 1999)

F568M-07 Standard Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Withdrawn 2012)



Back to the Main Committee Page