Technical Committees / Committee F04/


Committee F04.15 on Material Test Methods


Subcommittees and Standards

Showing results 1-38 of 38 matching ACTIVE standards under the jurisdiction of F04.15     F04 Home

F640-07 Standard Test Methods for Determining Radiopacity for Medical Use

F732-00(2006) Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

F746-04 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

F897-02(2007) Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
    See also WK15534 proposed revision

F1044-05 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

F1147-05 Standard Test Method for Tension Testing of Calcium Phosphate and Metal Coatings

F1160-05 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

F1536-95(2005) Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

F1634-95(2008) Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices

F1635-04a Standard Test Method for in Vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

F1801-97(2004) Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials

F1854-09 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
    See also WK16839 proposed revision

F1875-98(2004) Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-bore and Cone Taper Interface

F1978-00(2007)e2 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
    See also WK13365 proposed revision

F2003-02(2008) Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air

F2004-05 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

F2052-06e1 Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment

F2082-06 Standard Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery

F2102-06e1 Standard Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants

F2118-03(2009) Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
    See also WK23588 proposed revision

F2119-07 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants

F2129-08 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

F2182-02a Standard Test Method for Measurement of Radio Frequency Induced Heating Near Passive Implants During Magnetic Resonance Imaging
    See also WK21326 proposed revision

F2183-02(2008) Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants

F2213-06 Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment

F2214-02(2008) Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

F2255-05 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

F2256-05 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

F2258-05 Standard Test Method for Strength Properties of Tissue Adhesives in Tension

F2381-04 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

F2392-04 Standard Test Method for Burst Strength of Surgical Sealants

F2458-05 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

F2459-05 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis

F2503-08 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment

F2516-07e2 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

F2537-06 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion

F2625-07 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

F2754/F2754M-09 Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire

Showing results 1-6 of 6 matching Proposed New Standards under the jurisdiction of F04.15     F04 Home

WK15532 Assessment of Contamination and Residues on Medical Devices

WK15710 Measurement of Camber, Cast, Helix(Camber Offset), and Direction of Helix of Coiled Wire

WK19883 Conducting and Evaluating Galvanic Corrosion Tests of Medical Implant Devices

WK22045 Measurement of the Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

WK23734 the characterization of creep recovery of hydrogels via uniaxial compression testing

WK24408 Measurement of Straightness of Rod, Tubing, and Wire to be Used for Medical Devices



Back to the Main Committee Page