Technical Committees / Committee F04/


Committee F04.11 on Polymeric Materials


Subcommittees and Standards

Showing results 1-24 of 24 matching ACTIVE standards under the jurisdiction of F04.11     F04 Home

F451-08 Standard Specification for Acrylic Bone Cement

F602-09 Standard Criteria for Implantable Thermoset Epoxy Plastics

F624-09 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

F639-09 Standard Specification for Polyethylene Plastics for Medical Applications

F641-09 Standard Specification for Implantable Epoxy Electronic Encapsulants

F648-07e1 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

F665-09 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application

F702-98a(2003) Standard Specification for Polysulfone Resin for Medical Applications
    See also WK19981 proposed revision

F754-08 Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders

F755-99(2005) Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants

F997-98a(2003) Standard Specification for Polycarbonate Resin for Medical Applications

F1251-89(2003) Standard Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
    See also WK19753 proposed revision
    See also WK25790 proposed withdrawal

F1579-02e1 Standard Specification for Polyaryletherketone (PAEK) Polymers for Surgical Implant Applications

F1855-00(2005) Standard Specification for Polyoxymethylene (Acetal) for Medical Applications

F1876-98(2003)e1 Standard Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
    See also WK24512 proposed withdrawal

F1925-09 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
    See also WK18443 proposed revision

F2026-08 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
    See also WK17739 proposed revision

F2038-00(2005) Standard Guide for Silicone Elastomers, Gels and Foams Used in Medical Applications Part I - Formulations and Uncured Materials

F2042-00(2005) Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II - Crosslinking and Fabrication

F2313-08e1 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

F2565-06 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications

F2579-08 Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
    See also WK21350 proposed revision

F2695-07 Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications

F2759-09 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices

Showing results 1-4 of 4 matching Proposed New Standards under the jurisdiction of F04.11     F04 Home

WK17085 Guide for Guidance for evaluation and characterization of ultra-high molecular weight polyethylene (UHMWPE)in orthopaedic and spinal devices

WK24511 Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications

WK23084 Ultra-High-Molecular Weight Polyethylene Fibers for Surgical Implants

WK25597 Assessment of Bioabsorbable Implants



Back to the Main Committee Page