Subcommittees and Standards

Showing results 1-26 of 26 matching ACTIVE standards under the jurisdiction of E07.04     E07 Home

E569/E569M-13 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation
    See also WK36882 proposed revision
    See also WK40499 proposed revision

E650/E650M-12 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

E749/E749M-12 Standard Practice for Acoustic Emission Monitoring During Continuous Welding

E750-10 Standard Practice for Characterizing Acoustic Emission Instrumentation

E751/E751M-12 Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

E976-10 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

E1067/E1067M-11 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

E1106-12 Standard Test Method for Primary Calibration of Acoustic Emission Sensors

E1118/E1118M-11 Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

E1139/E1139M-12 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

E1211/E1211M-12 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

E1419-09 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

E1495/E1495M-12 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

E1736-10 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

E1781-08 Standard Practice for Secondary Calibration of Acoustic Emission Sensors
    See also WK39688 proposed revision

E1888/E1888M-12 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

E1930/E1930M-12 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

E1932-12 Standard Guide for Acoustic Emission Examination of Small Parts

E2075/E2075M-10 Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

E2076/E2076M-10 Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

E2191/E2191M-10 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

E2374-10 Standard Guide for Acoustic Emission System Performance Verification

E2478-11 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

E2598/E2598M-13 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers
    See also WK36892 proposed revision

E2661/E2661M-10 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

E2863-12 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

Showing results 1-7 of 7 matching Proposed New Standards under the jurisdiction of E07.04     E07 Home

WK658 Standard Test Method for Acoustic Emission Examination of Seam Welded High Energy Steam Piping

WK33018 New Practice for Acoustic Emission Examination of Steam Piping

WK33019 New Guide for Structural Health Monitoring Using Acoustic Emission

WK34922 New Terminology for Acoustic Emission Noise

WK36433 New Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

WK40852 New Practice for Control of Proppant Slurry Density Using Acoustic Emission.

WK42030 New Practice for Standard Practice for Acoustic Emission Examination of High Pressure Piping with Controlled Hydrostatic Stimulation

Back to the Main Committee Page