Technical Committees / Committee E07/


Committee E07.01 on Radiology (X and Gamma) Method


Subcommittees and Standards

Showing results 1-39 of 39 matching ACTIVE standards under the jurisdiction of E07.01     E07 Home

E94-04 Standard Guide for Radiographic Examination
    See also WK24893 proposed revision

E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

E747-04 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

E801-06 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices

E999-05 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing
    See also WK24837 proposed revision

E1000-98(2009) Standard Guide for Radioscopy

E1025-05 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
    See also WK24894 proposed revision

E1030-05 Standard Test Method for Radiographic Examination of Metallic Castings

E1032-06 Standard Test Method for Radiographic Examination of Weldments

E1079-05 Standard Practice for Calibration of Transmission Densitometers

E1114-09 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources
    See also WK18240 proposed revision

E1161-09 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components
    See also WK18163 proposed revision

E1165-04 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

E1254-08 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

E1255-09 Standard Practice for Radioscopy
    See also WK19536 proposed revision

E1390-06 Standard Specification for Illuminators Used for Viewing Industrial Radiographs

E1411-09 Standard Practice for Qualification of Radioscopic Systems
    See also WK22724 proposed revision

E1416-09 Standard Test Method for Radioscopic Examination of Weldments
    See also WK22725 proposed revision

E1441-00(2005) Standard Guide for Computed Tomography (CT) Imaging

E1570-00(2005)e1 Standard Practice for Computed Tomographic (CT) Examination

E1647-09 Standard Practice for Determining Contrast Sensitivity in Radioscopy
    See also WK22727 proposed revision

E1672-06 Standard Guide for Computed Tomography (CT) System Selection

E1695-95(2006)e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance

E1734-09 Standard Practice for Radioscopic Examination of Castings
    See also WK22728 proposed revision

E1735-07 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

E1742-08a Standard Practice for Radiographic Examination
    See also WK23208 proposed revision

E1814-96(2007) Standard Practice for Computed Tomographic (CT) Examination of Castings

E1815-08 Standard Test Method for Classification of Film Systems for Industrial Radiography

E1817-08 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

E1931-09 Standard Guide for X-Ray Compton Scatter Tomography
    See also WK23119 proposed revision

E1935-97(2008) Standard Test Method for Calibrating and Meausring CT Density

E2002-98(2009) Standard Practice for Determining Total Image Unsharpness in Radiology

E2007-08 Standard Guide for Computed Radiography
    See also WK21905 proposed revision

E2033-99(2006) Standard Practice for Computed Radiology (Photostimulable Luminescence Method)
    See also WK4102 proposed revision

E2104-09 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components
    See also WK9156 proposed revision

E2445-05 Standard Practice for Qualification and Long-Term Stability of Computed Radiology Systems

E2446-05 Standard Practice for Classification of Computed Radiology Systems

E2597-07e1 Standard Practice for Manufacturing Characterization of Digital Detector Arrays

E2662-09 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

Showing results 1-5 of 5 matching Proposed New Standards under the jurisdiction of E07.01     E07 Home

WK16413 Digital Detector Array Performance Evaluation and Long-Term Stability

WK7492 Digital Detector Array Radiology

WK13186 Standard Practice for Radiological Examination Using Digital Detector Arrays (DDAs)

WK13191 Radiologic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

WK13946 Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-Ray Tubes



Back to the Main Committee Page