Subcommittee D20.30 on Thermal Properties


    Showing results 1-29 of 29 matching ACTIVE standards under the jurisdiction of D20.30     D20 Home

    D635-14 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

        See also WK35298 proposed revision

        See also WK45597 proposed revision

    D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

        See also WK49258 proposed revision

    D731-10 Standard Test Method for Molding Index of Thermosetting Molding Powder

    D746-14 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

    D1238-13 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

        See also WK32760 proposed revision

    D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics

        See also WK48894 proposed revision

    D1790-14 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1929-14 Standard Test Method for Determining Ignition Temperature of Plastics

        See also WK32903 proposed revision

        See also WK32942 proposed revision

    D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2863-13 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D3014-11 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

    D3123-09 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

    D3364-99(2011) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

    D3418-15 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

        See also WK47852 proposed revision

        See also WK49142 proposed revision

    D3675-14 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

    D3795-00a(2012) Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

    D3801-10 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

        See also WK41718 proposed revision

    D3835-08 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

        See also WK28548 proposed revision

    D3895-14 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D4804-14 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4986-10 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

    D5025-12 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

    D5048-14 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

    D5132-11 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

    D5207-14 Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials

    D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

    D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

        See also WK49964 proposed revision

    D7309-13 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

    0 matching Proposed New Standards under the jurisdiction of D20.30     D20 Home

    Showing Results 1-4 of 4 matching WITHDRAWN standards under the jurisdiction of D20.30     D20 Home

    D731-95(1999) Standard Test Method for Molding Index of Thermosetting Molding Powder (Withdrawn 2008)

    D1929-96(2001)e1 Standard Test Method for Determining Ignition Temperature of Plastics (Withdrawn 2010)

    D3713-95 Standard Test Method for Measuring Response of Solid Plastics to Ignition by a Small Flame (Withdrawn 2000)

    D3814-06 Standard Guide for Locating Combustion Test Methods for Polymeric Materials (Withdrawn 2012)