Showing results 1-103 of 103 matching ACTIVE standards under the jurisdiction of D18.21 D18 Home
D3404-91(2004) Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
D4043-96(2010)e1 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
D4044-96(2008) Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
D4050-96(2008) Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems
D4104-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
D4105-96(2008) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4106-96(2008) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4630-96(2008) Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
D4631-95(2008) Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
D4696-92(2008) Standard Guide for Pore-Liquid Sampling from the Vadose Zone
D4700-91(2006) Standard Guide for Soil Sampling from the Vadose Zone
See also WK38864 proposed revision
D4750-87(2001) Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
See also WK32546 proposed reinstate
D5088-02(2008) Standard Practice for Decontamination of Field Equipment Used at Waste Sites
D5092-04(2010)e1 Standard Practice for Design and Installation of Groundwater Monitoring Wells
D5126/D5126M-90(2010)e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
D5254/D5254M-92(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site
D5269-96(2008) Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
D5270-96(2008) Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
D5299-99(2012)e1 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
D5314-92(2006) Standard Guide for Soil Gas Monitoring in the Vadose Zone
D5408-93(2010)e1 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors
D5409/D5409M-93(2010)e1 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical Descriptors
D5410-93(2007) Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage Descriptors
D5447-93e1 Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem (Withdrawn 2002)
D5447-04(2010) Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem
D5472-93(2005) Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
D5473-93(2006) Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
D5474-93(2012) Standard Guide for Selection of Data Elements for Groundwater Investigations
D5490-93(2008) Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
D5521-05 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
See also WK39199 proposed revision
D5521-94e1 Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers (Withdrawn 2003)
See also WK39199 proposed revision
D5608-10 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5609-94(2008) Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
D5610-94(2008) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
D5611-94(2008) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
D5716-95(2006) Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
D5717-95e1 Standard Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers (Withdrawn 2005)
D5718-95(2012) Standard Guide for Documenting a Groundwater Flow Model Application
See also WK39222 proposed revision
D5719-13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
See also WK39223 proposed revision
D5737-95(2006) Standard Guide for Methods for Measuring Well Discharge
D5738-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses
D5754-95(2006) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses
D5781-95(2006) Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
See also WK39201 proposed revision
D5782-95(2012) Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5783-95(2012) Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5784-95(2006) Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
See also WK39202 proposed revision
D5785-95(2013) Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
See also WK41267 proposed revision
D5786-95(2012) Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
D5787-95(2009) Standard Practice for Monitoring Well Protection
D5850-95(2012) Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
D5855-95(2013) Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
See also WK41268 proposed revision
D5872-95(2006) Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
See also WK39203 proposed revision
D5875-95(2006) Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
See also WK39224 proposed revision
D5876-95(2012)e1 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5877-95(2005) Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams Based on Data Analytical Calculations
D5880-95(2006) Standard Guide for Subsurface Flow and Transport Modeling
D5881-95(2005) Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5903-96(2012) Standard Guide for Planning and Preparing for a Groundwater Sampling Event
D5911/D5911M-96(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
D5912-96(2004) Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
D5920-96(2005) Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5978-96(2011)e1 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
D5979-96(2008) Standard Guide for Conceptualization and Characterization of Groundwater Systems
D5980-96(2010)e1 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
D5981-96(2008) Standard Guide for Calibrating a Groundwater Flow Model Application
See also WK36247 proposed revision
D6000-96(2008) Standard Guide for Presentation of Water-Level Information from Groundwater Sites
D6001-05(2012) Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
D6025-96(2008) Standard Guide for Developing and Evaluating Groundwater Modeling Codes
D6028-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6030-96(2008) Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
D6031/D6031M-96(2010)e1 Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6033-96(2008) Standard Guide for Describing the Functionality of a Groundwater Modeling Code
D6034-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6036-96(2008) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps
D6067-10 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
D6089-97(2010) Standard Guide for Documenting a Groundwater Sampling Event
D6106-97(2010) Standard Guide for Establishing Nomenclature of Groundwater Aquifers
D6168-97(2010) Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
D6169-98(2005) Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
See also WK39246 proposed revision
D6170-97(2010) Standard Guide for Selecting a Groundwater Modeling Code
D6171-97(2010) Standard Guide for Documenting a Groundwater Modeling Code
D6187-97(2010) Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
D6282-98(2005) Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
See also WK41701 proposed revision
D6285-99(2012)e1 Standard Guide for Locating Abandoned Wells
D6286-12 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
D6312-98(2012)e1 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
D6452-99(2012)e1 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
D6517-00(2012)e1 Standard Guide for Field Preservation of Groundwater Samples
D6564-00(2012)e1 Standard Guide for Field Filtration of Groundwater Samples
D6565-00(2005) Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
D6634-01(2006) Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
See also WK39303 proposed revision
D6642-01(2006) Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
D6724-04(2010) Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
D6725-04(2010) Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6771-02 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations (Withdrawn 2011)
D6911-03(2010) Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6914-04(2010) Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D7045-04(2010) Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
D7048-04(2010) Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7069-04(2010) Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
D7242-06 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
D7262-10 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
D7352-07(2012) Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
D7626-10 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
D7648-12 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
D7663-12 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
D7758-11 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
Showing results 1-5 of 5 matching Proposed New Standards under the jurisdiction of D18.21 D18 Home
WK9184 Guide for Identifying Landfill Gas Impacts to Groundwater at MSW Landfill Facilities
WK14112 New Guide for Guide for The Determination of Water (Moisture) Content of Soil and Rock
WK36302 New Guide for SELECTION OF CHEMICAL FIELD SCREENING AND FIELD ANALYTICAL METHODS USED IN VADOSE ZONE INVESTIGATIONS
WK40037 New Guide for Determining Concentration Values from Groundwater, Air, and Soil Gas Using Adsorbent-Based, Passive Samplers
WK32546 Reinstatement of D4750-87(2001) Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
D4750-87(2001) Standard Test Method for Determining Subsurface Liquid Levels in a Borehole or Monitoring Well (Observation Well) (Withdrawn 2010)
D5447-93e1 Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem (Withdrawn 2002)
D5521-94e1 Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers (Withdrawn 2003)
D5717-95e1 Standard Guide for Design of Ground-Water Monitoring Systems in Karst and Fractured-Rock Aquifers (Withdrawn 2005)
D6771-02 Standard Practice for Low-Flow Purging and Sampling for Wells and Devices Used for Ground-Water Quality Investigations (Withdrawn 2011)
Back to the Main Committee Page
