Committee D02 Subcommittees

Staff Manager: Alyson Fick

Subcommittees and Standards

Standards under the jurisdiction of D02

Each main committee in ASTM International is composed of subcommittees that address specific segments within the general subject area covered by the technical committee. Click on the subcommittee links below to see the title of existing standards for each subcommittee. Then, click on the resulting titles to see the standard's scope, referenced documents, and more.

  • D02.01 Combustion Characteristics
  • D02.01.0A Regional Group Activity
  • D02.01.0B Precision
  • D02.01.0C Test Equipment, Procedures, and Instrumentation
  • D02.01.0D CVCC Methods
  • D02.01.0E Reference Materials
  • D02.01.0G Editorial
  • D02.02 Hydrocarbon Measurement for Custody Transfer (Joint ASTM-API)
  • D02.02.08 Sampling (API MPMS Chapter 8.0)
  • D02.02.09 Density Determination (API MPMS Chapter 9.0)
  • D02.02.10 Sediment and Water (API MPMS Chapter 10.0)
  • D02.02.11 Physical Properties (API MPMS Chapter 11.0)
  • D02.03 Elemental Analysis
  • D02.04 Hydrocarbon Analysis
  • D02.04.0A Preparation of Standard Hydrocarbon Blends
  • D02.04.0C Liquid Chromatography
  • D02.04.0D Physical and Chemical Methods
  • D02.04.0E Editorial
  • D02.04.0F Absorption Spectroscopic Methods
  • D02.04.0G Manual on Hydrocarbon Type Analysis
  • D02.04.0H Chromatographic Distribution Methods
  • D02.04.0K Correlative Methods
  • D02.04.0L Gas Chromatography Methods
  • D02.04.0M Mass Spectrometry
  • D02.05 Properties of Fuels, Petroleum Coke and Carbon Material
  • D02.05.0B Calorimetry of Liquid Hydrocarbon Fuels
  • D02.05.0C Color and Reactivity
  • D02.05.0D Petroleum Coke
  • D02.06 Analysis of Liquid Fuels and Lubricants
  • D02.06.0A Chemical Analysis
  • D02.06.0B Physical Testing
  • D02.07 Flow Properties
  • D02.07.0A Newtonian Viscosity
  • D02.07.0B High Temperature Rheology of Non-Newtonian Fluids
  • D02.07.0C Low Temperature Rheology of Non-Newtonian Fluids
  • D02.07.0D Wax-Related Viscometric Properties of Fuels and Oils
  • D02.08 Volatility
  • D02.08.01 CS 92 Liaison Task Group
  • D02.08.0A Distillation
  • D02.08.0B Flammability
  • D02.08.0C Crude Distillation
  • D02.08.0D Vapor Pressure and V/L Ratio
  • D02.09 Oxidation of Lubricants
  • D02.09.0C Oxidation of Turbine Oils
  • D02.09.0D Oxidation of Lubricants
  • D02.09.0E Oxidation of Greases
  • D02.09.0G Oxidation Testing of Engine Oils
  • D02.10 Properties of Petroleum Waxes and Alternative Wax-like Materials
  • D02.10.0A Physical/Chemical Properties
  • D02.10.0C Technical Information
  • D02.12 Environmental Standards for Lubricants
  • D02.14 Stability, Cleanliness and Compatibility of Liquid Fuels
  • D02.25 Performance Assessment and Validation of Process Stream Analyzer Systems
  • D02.90 Executive
  • D02.92 Proficiency Testing Programs
  • D02.93.01 US TAG to ISO TC 28
  • D02.93.02 Global Updates and International Liaison Reports
  • D02.93.03 ASTM-EI Joint Method Section
  • D02.94 Coordinating Subcommittee on Quality Assurance and Statistics
  • D02.94.01 Task Group A: Quality Assurance and Quality Control
  • D02.94.02 Task Group B: Statistical Methods & Practices for Evaluation and Comparison of Test Methods
  • D02.95 Terminology
  • D02.96 In-Service Lubricant Testing and Condition Monitoring Services
  • D02.96.01 In-Service Lubricant Viscosity Testing Practices and Techniques
  • D02.96.02 Chemistry for the Evaluation of In-Service Lubricants
  • D02.96.03 FTIR Testing Practices and Techniques Related to In-Service Lubricants
  • D02.96.04 Guidelines for In-Services Lubricants Analysis
  • D02.96.05 In-Service Lubricants Particle Counting Practices and Techniques
  • D02.96.06 Practices and Techniques for Prediction and Determination of Microscopic Wear and Wear-related Properties
  • D02.96.07 Integrated Testers, Instrumentation Techniques for In-Service Lubricants
  • D02.96.0a Advisory
  • D02.97 Coordinating Subcommittee on Fluids for Electrified Vehicles and Drive Systems
  • D02.A0 Gasoline and Oxygenated Fuels
  • D02.A0.01 Gasoline and Gasoline-Oxygenate Blends
  • D02.A0.02 Oxygenated Fuels and Components
  • D02.A0.03 Volatility
  • D02.A0.04 Editorial
  • D02.B0 Automotive Lubricants
  • D02.B0.01 Passenger Car Engine Oils
  • D02.B0.02 Heavy Duty Engine Oils
  • D02.B0.03 Automotive Gear Lubricants & Fluids
  • D02.B0.04 Automotive Greases
  • D02.B0.07 Development and Surveillance of Bench Tests Methods
  • D02.B0.08 Test Monitoring System (TMS) Executive Committee
  • D02.B0.09 Editorial
  • D02.B0.10 Standards Acceleration
  • D02.C0 Turbine Oils
  • D02.C0.01 Turbine Oil Monitoring, Problems and Systems
  • D02.C0.02 Corrosion and Water/Air Separability
  • D02.D0 Hydrocarbons for Chemical and Special Uses
  • D02.D0.02 Ethylene
  • D02.D0.03 Propylene
  • D02.D0.04 C4 and C5 Hydrocarbons
  • D02.E0 Burner, Diesel and Non-Aviation Gas Turbine Fuels
  • D02.E0.01 Burner Fuels
  • D02.E0.02 Diesel Fuel Oils
  • D02.E0.03 Gas Turbine Liquid Fuels
  • D02.F0 Manufactured Carbon and Graphite Products
  • D02.G0 Lubricating Grease
  • D02.G0.01 Chemical and General Laboratory Tests
  • D02.G0.02 Consistency and Related Rheological Tests
  • D02.G0.03 Physical Tests
  • D02.G0.04 Functional Tests - Tribology
  • D02.G0.05 Functional Tests - Temperature
  • D02.G0.06 Functional Tests - Contamination
  • D02.G0.07 Research Techniques
  • D02.H0 Liquefied Petroleum Gas
  • D02.J0 Aviation Fuels
  • D02.J0.01 Jet Fuel Specifications
  • D02.J0.02 Aviation Piston Engine Fuels
  • D02.J0.03 Combustion and Thermal Properties
  • D02.J0.04 Additives and Electrical Properties
  • D02.J0.05 Fuel Cleanliness
  • D02.J0.06 Synthetic Aviation Turbine Fuels
  • D02.L0 Industrial Lubricants and Engineering Sciences of High Performance Fluids and Solids
  • D02.L0.01 Metal Removal Fluids and Lubricants
  • D02.L0.03 Corrosion Testing of Sheet Metal Processing Fluids
  • D02.L0.04 Metal Deformation Fluids and Lubricants
  • D02.L0.05 Solid Lubricants
  • D02.L0.06 Non-Lubricating Process Fluids
  • D02.L0.07 Engineering Sciences of High Performance Fluids and Solids (Formally D02.1100)
  • D02.L0.11 Tribological Properties of Industrial Fluids and Lubricates
  • D02.N0 Hydraulic Fluids
  • D02.N0.06 Fire Resistant Fluids
  • D02.N0.10 Specifications
  • D02.N0.13 New Method Development and working groups
  • D02.N0.14 Mechanical Testing and Efficiency
  • D02.N0.15 Thermal Stability and Compatibility
  • D02.P0 Recycled Products